X-Git-Url: http://git.zerfleddert.de/cgi-bin/gitweb.cgi/fnordlicht-mini/blobdiff_plain/24562c8a748c379de491019607921e5959459464..745723e4d1fee18fc31d79172fe8357a75628eea:/firmware/fnordlicht-bootloader/global.h

diff --git a/firmware/fnordlicht-bootloader/global.h b/firmware/fnordlicht-bootloader/global.h
deleted file mode 100644
index 170de6a..0000000
--- a/firmware/fnordlicht-bootloader/global.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/* vim:ts=4 sts=4 et tw=80
- *
- *         fnordlichtmini serial bootloader
- *
- *    for additional information please
- *    see http://lochraster.org/fnordlichtmini
- *
- * (c) by Alexander Neumann <alexander@bumpern.de>
- *     Lars Noschinski <lars@public.noschinski.de>
- *
- * This program is free software: you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 3 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef __GLOBAL_H
-#define __GLOBAL_H
-
-#include "config.h"
-
-/* configure primary pwm pins (MUST be three successive pins in a port) */
-#define PWM_PORT B
-#define PWM_CHANNELS 3
-#define PWM_CHANNEL_MASK (_BV(PB0) | _BV(PB1) | _BV(PB2))
-#define PWM_SHIFT 0
-
-/* configure INT pin */
-#define REMOTE_INT_PORT D
-#define REMOTE_INT_PIN PD2
-
-/* abbreviations for port, ddr and pin */
-#define P_PORT _OUTPORT(PWM_PORT)
-#define P_DDR _DDRPORT(PWM_PORT)
-#define R_PORT _OUTPORT(REMOTE_INT_PORT)
-#define R_DDR _DDRPORT(REMOTE_INT_PORT)
-#define R_PIN _INPORT(REMOTE_INT_PORT)
-#define INTPIN REMOTE_INT_PIN
-
-/* check if hardware is valid */
-#if defined(HARDWARE_fnordlicht)
-    /* specific settings for old fnordlicht hardware */
-    #if !defined(PWM_INVERTED)
-    #define PWM_INVERTED
-    #endif
-#elif defined(HARDWARE_fnordlichtmini)
-    /* specific settings for fnordlichtmini hardware */
-
-#else
-#error "unknown HARDWARE platform!"
-#endif
-
-/* turn pwm output pins on and off */
-#ifdef PWM_INVERTED
-#define PWM_PIN_ON(bit) P_PORT &= ~_BV(bit) << (PWM_SHIFT)
-#define PWM_PIN_OFF(bit) P_PORT |= _BV(bit) << (PWM_SHIFT)
-#else
-#define PWM_PIN_ON(bit) P_PORT |= _BV(bit) << (PWM_SHIFT)
-#define PWM_PIN_OFF(bit) P_PORT &= ~_BV(bit) << (PWM_SHIFT)
-#endif
-
-#define PWM_PIN_TOGGLE(bit) P_PORT ^= _BV(bit) << (PWM_SHIFT)
-
-#define PWM_RED 0
-#define PWM_GREEN 1
-#define PWM_BLUE 2
-
-/* wait 100ms before checking INT pin (for delay_loop_2(50000)) */
-#define CONFIG_DELAY F_CPU/4/50000/10
-#define CONFIG_DELAY_LOOP2 50000
-
-#endif