adding log command to daemon
[hmcfgusb] /
4github mirror of
6I am not the author of this package, i'm just mirroring it here on github, all credits go to
7Michael Gernoth
11 This repository contains utilities to use the HM-CFG-USB(2) (HomeMatic USB Konfigurations-Adapter) from ELV on Linux/Unix by using libusb 1.0.
12 The HM-CFG-USB can be used to send and receive BidCoS-Packets to control HomeMatic home automation devices (like remote controllable sockets, switches, sensors, ...).
57a64032 13
4d15b8ca 14 This repository contains, amongst others, an application, which emulates the HomeMatic LAN configuration adapter-protocol to make it possible to use the HM-CFG-USB in Fhem or as a lan configuration tool for the CCU or the HomeMatic windows configuration software.
57a64032 15
16 Short hmland HowTo:
17 Install prerequisites: apt-get install libusb-1.0-0-dev make gcc
18 Get the current version of this software: hmcfgusb-HEAD-xxxxxxx.tar.gz (xxxxxxx is part of the commit-id. xxxxxxx is just a placeholder for this HowTo, use your value)
19 Extract the archive: tar xzf hmcfgusb-HEAD-xxxxxxx.tar.gz
20 Change into the new directory: cd hmcfgusb-HEAD-xxxxxxx
21 Build the code: make
22 Optional: Install udev-rules so normal users can access the device: sudo cp hmcfgusb.rules /etc/udev/rules.d/
23 Plug in the HM-CFG-USB
24 Run hmland (with debugging the first time, see -h switch): ./hmland -p 1234 -D
25 Configure Fhem to use your new HMLAN device:
26 define hmusb HMLAN
27 attr hmusb hmId <hmId>
28 Updating the HM-CFG-USB firmware to version 0.967:
29 Compile the hmcfgusb utilities like in the hmland HowTo above (steps 1 to 7) and stay in the directory
30 Download the new firmware: hmusbif.03c7.enc: wget
31 Make sure that hmland is not running
32 Flash the update to the USB-stick: ./flash-hmcfgusb hmusbif.03c7.enc (You might need to use sudo for this)
33 (Old) Prebuilt package for OpenWRT (ar71xx): hmcfgusb_1_ar71xx.ipk
Impressum, Datenschutz