add hint from leif

[m1-debian] / README.md

diff --git a/README.md b/README.md
index e1ac5c247f58c934e0bfe12872189d546915ce58..b2da7a53fb4b9ffa1ad913f79f0e8a109a607e69 100644 (file)
--- a/README.md
+++ b/README.md
@@ -62,7 +62,7 @@ If you don't want to use the prebuild artefacts, you can build them yourself usi
 * Prerequisites
 
         - USB Stick. this is what this guide assumes, but it is also possible
 * Prerequisites
 
         - USB Stick. this is what this guide assumes, but it is also possible

-          to run the Debian installer from another PC using m1n1 chainloading.
+          to run the Debian livesystem from another PC using m1n1 chainloading.

           But if you know how to do that, you probably don't need this guide.
         - If possible use an Ethernet Dongle, less typing.
 
           But if you know how to do that, you probably don't need this guide.
         - If possible use an Ethernet Dongle, less typing.
 


@@ -70,14 +70,13 @@ If you don't want to use the prebuild artefacts, you can build them yourself usi
 
         # Identify the usb stick device
         lsblk
 
         # Identify the usb stick device
         lsblk

+

         DEVICE=/dev/sdX
         parted -a optimal $DEVICE mklabel msdos
         parted -a optimal $DEVICE mkpart primary fat32 2048s 100%
         mkfs.vfat ${DEVICE}1
         DEVICE=/dev/sdX
         parted -a optimal $DEVICE mklabel msdos
         parted -a optimal $DEVICE mkpart primary fat32 2048s 100%
         mkfs.vfat ${DEVICE}1

-
-        mount /dev/sdX1 /mnt
-        cd /mnt
-        curl -sL https://tg.st/u/asahi-debian-live.tar | tar -xf -
+        mount ${DEVICE}1 /mnt
+        curl -sL https://tg.st/u/asahi-debian-live.tar | tar -C /mnt -xf -

         umount /mnt
 
 In order to format the usb stick under Macos, open the disk utility, right-click on the usb stick (usually the lowest device in the list) and select erase. Choose the following options:
         umount /mnt
 
 In order to format the usb stick under Macos, open the disk utility, right-click on the usb stick (usually the lowest device in the list) and select erase. Choose the following options:


@@ -94,7 +93,7 @@ Than open a terminal, and run the following commands:
 
 * You need to run the asahi installer and have either an OS installed or m1n1+UEFI.
 
 
 * You need to run the asahi installer and have either an OS installed or m1n1+UEFI.
 

-* If you have a EFI binary on the NVMe and want to boot from the usb stick, you need to interrupt u-boot on the countdoun by pressing any key and run the following comamnd to boot from usb:
+* If you have a EFI binary on the NVMe and want to boot from the usb stick, you need to interrupt u-boot on the countdown by pressing any key and run the following comamnd to boot from usb:

 
         run bootcmd_usb0
 
 
         run bootcmd_usb0