X-Git-Url: http://git.zerfleddert.de/cgi-bin/gitweb.cgi/m1-debian/blobdiff_plain/2c6bad26ab85de95ae3c56b1deac6afef9e5b7bd..a7af9e48e6b6e89d35eef247fb024c9870b9bb14:/doc/asahi.txt

diff --git a/doc/asahi.txt b/doc/asahi.txt
index 1c90c85..9d856da 100644
--- a/doc/asahi.txt
+++ b/doc/asahi.txt
@@ -1,6 +1,13 @@
+# This is a developer quickstart guide for a tethered boot. If you're looking
+# for an enduser guide see: https://github.com/AsahiLinux/docs/wiki/Debian
+# If you find errors or I should have elaborated more to get to going faster,
+# please let me know in IRC. My nick is Glanzmann or drop me an email at
+# thomas@glanzmann.de
+
 # Boot into macos
 
-# Extract the firmware and save it somewhere you have access to
+# Extract the firmware and save it somewhere you have access to.
+# This firmware needs to be extracted later in /lib/firmware
 curl -sL tg.st/u/fwx.sh | sh
 
 # Make space the last number is the size that MacOS instatllation should consume
@@ -11,17 +18,14 @@ diskutil apfs resizeContainer disk0s2 200GB
 # finished and press Return to shutdown your system.
 curl -L https://mrcn.st/alxsh | sh
 
-# 1. Press and hold down the power button to power on the system.
-#    * It is important that the system be fully powered off before this step,
-#      and that you press and hold down the button once, not multiple times.
-#      This is required to put the machine into the right mode.
-# 2. Release it once 'Entering startup options' is displayed.
-# 3. Choose Options.
-# 4. You will briefly see a 'macOS Recovery' dialog.
-#    * If you are asked to 'Select a volume to recover',
-#      then choose your normal macOS volume and click Next.
-# 5. Click on the Utilities menu and select Terminal.
-# 6. Type the following command and follow the prompts:
+# Wait for the system to shutdown and the LEDs turn off. Than wait another 5
+# seconds. Now press and do _not_ let go of the power button for 15 seconds.
+# In the boot picker, select 'Options' and select Utilities > Terminal. In this
+# terminal execute. If you screw the power button holding, turn the System off by
+# pressing the power button until it is off and start from the beginning of this
+# paragraph.
+
+/Volumes/Linux/step2.sh
 
 # Create an EFI parition because the final layout will have that
 diskutil list
@@ -33,7 +37,7 @@ diskutil addPartition <identifier before free space> %Linux% %noformat% <size>
 
 # dd a Debian Testing rootfs on it (minimum size 1 GB)
 # Find the scripts to create that rootfs here: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/m1-debian
-curl -L https://tg.st/u/m1.tgz | tar -xOz | dd of=/dev/<identifier of Linux Filesystem>
+curl -L https://tg.st/u/m1.tgz | tar -xOz | dd of=/dev/<identifier of Linux Filesystem> bs=8m
 
 # Relax the boot policy for the stub os and uplaod install m1n1
 /Volumes/Linux/step2.sh
@@ -41,17 +45,14 @@ curl -L https://tg.st/u/m1.tgz | tar -xOz | dd of=/dev/<identifier of Linux File
 # Build dependencies
 sudo apt install -y gcc-aarch64-linux-gnu libc6-dev-arm64-cross device-tree-compiler imagemagick build-essential bc kmod flex cpio libncurses5-dev libelf-dev:native bison libssl-dev
 
-# Compile the kernel
+# Crosscompile the kernel
 git clone --depth 1 https://github.com/AsahiLinux/linux
 cd linux
 curl -s https://tg.st/u/9ce9060dea91951a330feeeda3ad636bc88c642c.patch | git am -
 curl -s https://tg.st/u/5nly | git am -
-curl -s https://tg.st/u/m1-config-2022-01-27 > .config
-
-# Crosscompile the kernel
+curl -s https://tg.st/u/config-2022-01-28 > .config
 make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- olddefconfig
 make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j32 Image.gz dtbs
-
 cd ..
 
 # build m1n1