]> git.zerfleddert.de Git - proxmark3-svn/blame - common/protocols.h
add: 'hf mf personalize' (personalize UID on Mifare Classic EV1 7byte UID cards)
[proxmark3-svn] / common / protocols.h
CommitLineData
b67f7ec3
MHS
1#ifndef PROTOCOLS_H
2#define PROTOCOLS_H
3
4//The following data is taken from http://www.proxmark.org/forum/viewtopic.php?pid=13501#p13501
5/*
6ISO14443A (usually NFC tags)
7 26 (7bits) = REQA
8 30 = Read (usage: 30+1byte block number+2bytes ISO14443A-CRC - answer: 16bytes)
9 A2 = Write (usage: A2+1byte block number+4bytes data+2bytes ISO14443A-CRC - answer: 0A [ACK] or 00 [NAK])
10 52 (7bits) = WUPA (usage: 52(7bits) - answer: 2bytes ATQA)
11 93 20 = Anticollision (usage: 9320 - answer: 4bytes UID+1byte UID-bytes-xor)
12 93 70 = Select (usage: 9370+5bytes 9320 answer - answer: 1byte SAK)
13 95 20 = Anticollision of cascade level2
14 95 70 = Select of cascade level2
15 50 00 = Halt (usage: 5000+2bytes ISO14443A-CRC - no answer from card)
16Mifare
17 60 = Authenticate with KeyA
18 61 = Authenticate with KeyB
19 40 (7bits) = Used to put Chinese Changeable UID cards in special mode (must be followed by 43 (8bits) - answer: 0A)
20 C0 = Decrement
21 C1 = Increment
22 C2 = Restore
23 B0 = Transfer
24Ultralight C
25 A0 = Compatibility Write (to accomodate MIFARE commands)
26 1A = Step1 Authenticate
27 AF = Step2 Authenticate
28
29
30ISO14443B
31 05 = REQB
32 1D = ATTRIB
33 50 = HALT
34SRIX4K (tag does not respond to 05)
35 06 00 = INITIATE
36 0E xx = SELECT ID (xx = Chip-ID)
37 0B = Get UID
38 08 yy = Read Block (yy = block number)
39 09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written)
40 0C = Reset to Inventory
41 0F = Completion
42 0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate)
43
44
45ISO15693
46 MANDATORY COMMANDS (all ISO15693 tags must support those)
47 01 = Inventory (usage: 260100+2bytes ISO15693-CRC - answer: 12bytes)
48 02 = Stay Quiet
49 OPTIONAL COMMANDS (not all tags support them)
50 20 = Read Block (usage: 0220+1byte block number+2bytes ISO15693-CRC - answer: 4bytes)
51 21 = Write Block (usage: 0221+1byte block number+4bytes data+2bytes ISO15693-CRC - answer: 4bytes)
52 22 = Lock Block
53 23 = Read Multiple Blocks (usage: 0223+1byte 1st block to read+1byte last block to read+2bytes ISO15693-CRC)
54 25 = Select
55 26 = Reset to Ready
56 27 = Write AFI
57 28 = Lock AFI
58 29 = Write DSFID
59 2A = Lock DSFID
60 2B = Get_System_Info (usage: 022B+2bytes ISO15693-CRC - answer: 14 or more bytes)
61 2C = Read Multiple Block Security Status (usage: 022C+1byte 1st block security to read+1byte last block security to read+2bytes ISO15693-CRC)
62
63EM Microelectronic CUSTOM COMMANDS
64 A5 = Active EAS (followed by 1byte IC Manufacturer code+1byte EAS type)
65 A7 = Write EAS ID (followed by 1byte IC Manufacturer code+2bytes EAS value)
66 B8 = Get Protection Status for a specific block (followed by 1byte IC Manufacturer code+1byte block number+1byte of how many blocks after the previous is needed the info)
67 E4 = Login (followed by 1byte IC Manufacturer code+4bytes password)
68NXP/Philips CUSTOM COMMANDS
69 A0 = Inventory Read
70 A1 = Fast Inventory Read
71 A2 = Set EAS
72 A3 = Reset EAS
73 A4 = Lock EAS
74 A5 = EAS Alarm
75 A6 = Password Protect EAS
76 A7 = Write EAS ID
77 A8 = Read EPC
78 B0 = Inventory Page Read
79 B1 = Fast Inventory Page Read
80 B2 = Get Random Number
81 B3 = Set Password
82 B4 = Write Password
83 B5 = Lock Password
84 B6 = Bit Password Protection
85 B7 = Lock Page Protection Condition
86 B8 = Get Multiple Block Protection Status
87 B9 = Destroy SLI
88 BA = Enable Privacy
89 BB = 64bit Password Protection
90 40 = Long Range CMD (Standard ISO/TR7003:1990)
91 */
92
93#define ICLASS_CMD_ACTALL 0x0A
94#define ICLASS_CMD_READ_OR_IDENTIFY 0x0C
95#define ICLASS_CMD_SELECT 0x81
96#define ICLASS_CMD_PAGESEL 0x84
97#define ICLASS_CMD_READCHECK_KD 0x88
98#define ICLASS_CMD_READCHECK_KC 0x18
99#define ICLASS_CMD_CHECK 0x05
100#define ICLASS_CMD_DETECT 0x0F
101#define ICLASS_CMD_HALT 0x00
b82d8098 102#define ICLASS_CMD_UPDATE 0x87
b67f7ec3
MHS
103#define ICLASS_CMD_ACT 0x8E
104#define ICLASS_CMD_READ4 0x06
105
106
107#define ISO14443A_CMD_REQA 0x26
b67f7ec3
MHS
108#define ISO14443A_CMD_WUPA 0x52
109#define ISO14443A_CMD_ANTICOLL_OR_SELECT 0x93
110#define ISO14443A_CMD_ANTICOLL_OR_SELECT_2 0x95
c872d8c1 111#define ISO14443A_CMD_ANTICOLL_OR_SELECT_3 0x97
b67f7ec3
MHS
112#define ISO14443A_CMD_HALT 0x50
113#define ISO14443A_CMD_RATS 0xE0
114
b8dd1ef6 115#define MIFARE_CMD_READBLOCK 0x30
116#define MIFARE_CMD_WRITEBLOCK 0xA0
117#define MIFARE_AUTH_KEYA 0x60
118#define MIFARE_AUTH_KEYB 0x61
119#define MIFARE_MAGICWUPC1 0x40
120#define MIFARE_MAGICWUPC2 0x43
121#define MIFARE_MAGICWIPEC 0x41
122#define MIFARE_CMD_INC 0xC0
123#define MIFARE_CMD_DEC 0xC1
124#define MIFARE_CMD_RESTORE 0xC2
125#define MIFARE_CMD_TRANSFER 0xB0
126
127#define MIFARE_EV1_PERSONAL_UID 0x40
0b4efbde 128#define MIFARE_EV1_UIDF0 0x00
129#define MIFARE_EV1_UIDF1 0x40
130#define MIFARE_EV1_UIDF2 0x20
131#define MIFARE_EV1_UIDF3 0x60
b8dd1ef6 132#define MIFARE_EV1_SETMODE 0x43
133
134#define MIFARE_ULC_WRITE 0xA2
135#define MIFARE_ULC_COMP_WRITE MIFARE_CMD_WRITEBLOCK
136#define MIFARE_ULC_AUTH_1 0x1A
137#define MIFARE_ULC_AUTH_2 0xAF
138
139#define MIFARE_ULEV1_AUTH 0x1B
140#define MIFARE_ULEV1_VERSION 0x60
141#define MIFARE_ULEV1_FASTREAD 0x3A
142#define MIFARE_ULEV1_WRITE 0xA2
143#define MIFARE_ULEV1_COMP_WRITE MIFARE_CMD_WRITEBLOCK
144#define MIFARE_ULEV1_READ_CNT 0x39
145#define MIFARE_ULEV1_INCR_CNT 0xA5
146#define MIFARE_ULEV1_READSIG 0x3C
147#define MIFARE_ULEV1_CHECKTEAR 0x3E
148#define MIFARE_ULEV1_VCSL 0x4B
149
150// mifare 4bit card answers
151#define CARD_ACK 0x0A // 1010 - ACK
152#define CARD_NACK_NA 0x04 // 0100 - NACK, not allowed (command not allowed)
153#define CARD_NACK_TR 0x05 // 0101 - NACK, transmission error
154
b67f7ec3
MHS
155
156/**
15706 00 = INITIATE
1580E xx = SELECT ID (xx = Chip-ID)
1590B = Get UID
16008 yy = Read Block (yy = block number)
16109 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written)
1620C = Reset to Inventory
1630F = Completion
1640A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate)
165**/
166
167#define ISO14443B_REQB 0x05
168#define ISO14443B_ATTRIB 0x1D
169#define ISO14443B_HALT 0x50
170#define ISO14443B_INITIATE 0x06
171#define ISO14443B_SELECT 0x0E
172#define ISO14443B_GET_UID 0x0B
173#define ISO14443B_READ_BLK 0x08
174#define ISO14443B_WRITE_BLK 0x09
175#define ISO14443B_RESET 0x0C
176#define ISO14443B_COMPLETION 0x0F
177#define ISO14443B_AUTHENTICATE 0x0A
178
8c6cca0b 179// ISO15693 COMMANDS
180#define ISO15693_INVENTORY 0x01
181#define ISO15693_STAYQUIET 0x02
182#define ISO15693_READBLOCK 0x20
183#define ISO15693_WRITEBLOCK 0x21
184#define ISO15693_LOCKBLOCK 0x22
185#define ISO15693_READ_MULTI_BLOCK 0x23
186#define ISO15693_SELECT 0x25
187#define ISO15693_RESET_TO_READY 0x26
188#define ISO15693_WRITE_AFI 0x27
189#define ISO15693_LOCK_AFI 0x28
190#define ISO15693_WRITE_DSFID 0x29
191#define ISO15693_LOCK_DSFID 0x2A
192#define ISO15693_GET_SYSTEM_INFO 0x2B
193#define ISO15693_READ_MULTI_SECSTATUS 0x2C
194
195// ISO15693 REQUEST FLAGS
196#define ISO15693_REQ_SUBCARRIER_TWO (1<<0)
197#define ISO15693_REQ_DATARATE_HIGH (1<<1)
198#define ISO15693_REQ_INVENTORY (1<<2)
199#define ISO15693_REQ_PROTOCOL_EXT (1<<3) // RFU
200#define ISO15693_REQ_OPTION (1<<6) // Command specific option selector
201// when REQ_INVENTORY is not set
202#define ISO15693_REQ_SELECT (1<<4) // only selected cards response
203#define ISO15693_REQ_ADDRESS (1<<5) // this req contains an address
204// when REQ_INVENTORY is set
205#define ISO15693_REQINV_AFI (1<<4) // AFI Field is present
206#define ISO15693_REQINV_SLOT1 (1<<5) // 1 Slot (16 slots if not set)
207
208// ISO15693 RESPONSE FLAGS
209#define ISO15693_RES_ERROR (1<<0)
210#define ISO15693_RES_EXT (1<<3) // Protocol Extention
211
212// ISO15693 RESPONSE ERROR CODES
213#define ISO15693_NOERROR 0x00
214#define ISO15693_ERROR_CMD_NOT_SUP 0x01 // Command not supported
215#define ISO15693_ERROR_CMD_NOT_REC 0x02 // Command not recognized (eg. parameter error)
216#define ISO15693_ERROR_CMD_OPTION 0x03 // Command option not supported
217#define ISO15693_ERROR_GENERIC 0x0F // No additional Info about this error
218#define ISO15693_ERROR_BLOCK_UNAVAILABLE 0x10
219#define ISO15693_ERROR_BLOCK_LOCKED_ALREADY 0x11 // cannot lock again
220#define ISO15693_ERROR_BLOCK_LOCKED 0x12 // cannot be changed
221#define ISO15693_ERROR_BLOCK_WRITE 0x13 // Writing was unsuccessful
222#define ISO15693_ERROR_BLOCL_WRITELOCK 0x14 // Locking was unsuccessful
b67f7ec3
MHS
223
224
ee1eadee 225// Topaz command set:
226#define TOPAZ_REQA 0x26 // Request
227#define TOPAZ_WUPA 0x52 // WakeUp
228#define TOPAZ_RID 0x78 // Read ID
229#define TOPAZ_RALL 0x00 // Read All (all bytes)
230#define TOPAZ_READ 0x01 // Read (a single byte)
231#define TOPAZ_WRITE_E 0x53 // Write-with-erase (a single byte)
232#define TOPAZ_WRITE_NE 0x1a // Write-no-erase (a single byte)
48ece4a7 233// additional commands for Dynamic Memory Model
234#define TOPAZ_RSEG 0x10 // Read segment
235#define TOPAZ_READ8 0x02 // Read (eight bytes)
236#define TOPAZ_WRITE_E8 0x54 // Write-with-erase (eight bytes)
237#define TOPAZ_WRITE_NE8 0x1B // Write-no-erase (eight bytes)
ee1eadee 238
239
43591e64 240#define ISO_14443A 0
241#define ICLASS 1
242#define ISO_14443B 2
243#define TOPAZ 3
244#define PROTO_MIFARE 4
245#define ISO_7816_4 5
0d2624a0 246#define ISO_15693 6
53fb848a 247#define ISO_14443_4 7
0d2624a0 248
b67f7ec3 249
1defcf60
MHS
250//-- Picopass fuses
251#define FUSE_FPERS 0x80
252#define FUSE_CODING1 0x40
253#define FUSE_CODING0 0x20
254#define FUSE_CRYPT1 0x10
255#define FUSE_CRYPT0 0x08
256#define FUSE_FPROD1 0x04
257#define FUSE_FPROD0 0x02
258#define FUSE_RA 0x01
259
43591e64 260// ISO 7816-4 Basic interindustry commands. For command APDU's.
43591e64 261#define ISO7816_ERASE_BINARY 0x0E
43591e64 262#define ISO7816_VERIFY 0x20
43591e64 263#define ISO7816_MANAGE_CHANNEL 0x70
53fb848a 264#define ISO7816_EXTERNAL_AUTHENTICATE 0x82
265#define ISO7816_GET_CHALLENGE 0x84
266#define ISO7816_INTERNAL_AUTHENTICATE 0x88
267#define ISO7816_SELECT_FILE 0xA4
268#define ISO7816_GET_PROCESSING_OPTIONS 0xA8
269#define ISO7816_READ_BINARY 0xB0
270#define ISO7816_READ_RECORDS 0xB2
6b5105be 271#define ISO7816_GET_RESPONSE 0xC0
53fb848a 272#define ISO7816_ENVELOPE 0xC2
273#define ISO7816_GET_DATA 0xCA
274#define ISO7816_WRITE_BINARY 0xD0
275#define ISO7816_WRITE_RECORD 0xD2
276#define ISO7816_UPDATE_BINARY 0xD6
277#define ISO7816_PUT_DATA 0xDA
278#define ISO7816_UPDATE_DATA 0xDC
279#define ISO7816_APPEND_RECORD 0xE2
43591e64 280// ISO7816-4 For response APDU's
281#define ISO7816_OK 0x9000
282// 6x xx = ERROR
6b5105be 283#define ISO7816_MAX_FRAME_SIZE 261
43591e64 284
285
286
1defcf60 287void printIclassDumpInfo(uint8_t* iclass_dump);
bbd19bec 288void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t *app_areas, uint8_t *kb);
b67f7ec3 289
3606ac0a 290/* T55x7 configuration register definitions */
9f669cb2 291#define T55x7_POR_DELAY 0x00000001
292#define T55x7_ST_TERMINATOR 0x00000008
293#define T55x7_PWD 0x00000010
294#define T55x7_MAXBLOCK_SHIFT 5
295#define T55x7_AOR 0x00000200
296#define T55x7_PSKCF_RF_2 0
297#define T55x7_PSKCF_RF_4 0x00000400
298#define T55x7_PSKCF_RF_8 0x00000800
299#define T55x7_MODULATION_DIRECT 0
300#define T55x7_MODULATION_PSK1 0x00001000
301#define T55x7_MODULATION_PSK2 0x00002000
302#define T55x7_MODULATION_PSK3 0x00003000
303#define T55x7_MODULATION_FSK1 0x00004000
304#define T55x7_MODULATION_FSK2 0x00005000
305#define T55x7_MODULATION_FSK1a 0x00006000
306#define T55x7_MODULATION_FSK2a 0x00007000
307#define T55x7_MODULATION_MANCHESTER 0x00008000
308#define T55x7_MODULATION_BIPHASE 0x00010000
309#define T55x7_MODULATION_DIPHASE 0x00018000
b97311b1 310#define T55x7_X_MODE 0x00020000
9f669cb2 311#define T55x7_BITRATE_RF_8 0
312#define T55x7_BITRATE_RF_16 0x00040000
313#define T55x7_BITRATE_RF_32 0x00080000
314#define T55x7_BITRATE_RF_40 0x000C0000
315#define T55x7_BITRATE_RF_50 0x00100000
316#define T55x7_BITRATE_RF_64 0x00140000
317#define T55x7_BITRATE_RF_100 0x00180000
318#define T55x7_BITRATE_RF_128 0x001C0000
3606ac0a 319
320/* T5555 (Q5) configuration register definitions */
9f669cb2 321#define T5555_ST_TERMINATOR 0x00000001
322#define T5555_MAXBLOCK_SHIFT 0x00000001
323#define T5555_MODULATION_MANCHESTER 0
324#define T5555_MODULATION_PSK1 0x00000010
325#define T5555_MODULATION_PSK2 0x00000020
326#define T5555_MODULATION_PSK3 0x00000030
327#define T5555_MODULATION_FSK1 0x00000040
328#define T5555_MODULATION_FSK2 0x00000050
329#define T5555_MODULATION_BIPHASE 0x00000060
330#define T5555_MODULATION_DIRECT 0x00000070
331#define T5555_INVERT_OUTPUT 0x00000080
332#define T5555_PSK_RF_2 0
333#define T5555_PSK_RF_4 0x00000100
334#define T5555_PSK_RF_8 0x00000200
335#define T5555_USE_PWD 0x00000400
336#define T5555_USE_AOR 0x00000800
4ab135c0 337#define T5555_SET_BITRATE(x) (((x-2)/2)<<12)
338#define T5555_GET_BITRATE(x) ((((x >> 12) & 0x3F)*2)+2)
76346455 339#define T5555_BITRATE_SHIFT 12 //(RF=2n+2) ie 64=2*0x1F+2 or n = (RF-2)/2
9f669cb2 340#define T5555_FAST_WRITE 0x00004000
341#define T5555_PAGE_SELECT 0x00008000
3606ac0a 342
8b6abef5 343#define T55XX_WRITE_TIMEOUT 1500
344
3606ac0a 345uint32_t GetT55xxClockBit(uint32_t clock);
346
4ab135c0 347// em4x05 & em4x69 chip configuration register definitions
348#define EM4x05_GET_BITRATE(x) (((x & 0x3F)*2)+2)
349#define EM4x05_SET_BITRATE(x) ((x-2)/2)
350#define EM4x05_MODULATION_NRZ 0x00000000
351#define EM4x05_MODULATION_MANCHESTER 0x00000040
352#define EM4x05_MODULATION_BIPHASE 0x00000080
353#define EM4x05_MODULATION_MILLER 0x000000C0 //not supported by all 4x05/4x69 chips
354#define EM4x05_MODULATION_PSK1 0x00000100 //not supported by all 4x05/4x69 chips
355#define EM4x05_MODULATION_PSK2 0x00000140 //not supported by all 4x05/4x69 chips
356#define EM4x05_MODULATION_PSK3 0x00000180 //not supported by all 4x05/4x69 chips
357#define EM4x05_MODULATION_FSK1 0x00000200 //not supported by all 4x05/4x69 chips
358#define EM4x05_MODULATION_FSK2 0x00000240 //not supported by all 4x05/4x69 chips
359#define EM4x05_PSK_RF_2 0
360#define EM4x05_PSK_RF_4 0x00000400
361#define EM4x05_PSK_RF_8 0x00000800
362#define EM4x05_MAXBLOCK_SHIFT 14
363#define EM4x05_FIRST_USER_BLOCK 5
364#define EM4x05_SET_NUM_BLOCKS(x) ((x+5-1)<<14) //# of blocks sent during default read mode
365#define EM4x05_GET_NUM_BLOCKS(x) (((x>>14) & 0xF)-5+1)
366#define EM4x05_READ_LOGIN_REQ 1<<18
367#define EM4x05_READ_HK_LOGIN_REQ 1<<19
368#define EM4x05_WRITE_LOGIN_REQ 1<<20
369#define EM4x05_WRITE_HK_LOGIN_REQ 1<<21
370#define EM4x05_READ_AFTER_WRITE 1<<22
371#define EM4x05_DISABLE_ALLOWED 1<<23
372#define EM4x05_READER_TALK_FIRST 1<<24
373
3606ac0a 374#endif
375// PROTOCOLS_H
Impressum, Datenschutz