Merge pull request #943 from dgorbunov/patch-1

[proxmark3-svn] / fpga / hi_get_trace.v

//-----------------------------------------------------------------------------
//
// piwi, Feb 2019
//-----------------------------------------------------------------------------

module hi_get_trace(
       ck_1356megb,
       adc_d, trace_enable, major_mode,
       ssp_frame, ssp_din, ssp_clk
);
    input ck_1356megb;
    input [7:0] adc_d;
	input trace_enable;
	input [2:0] major_mode;
    output ssp_frame, ssp_din, ssp_clk;

// clock divider
reg [6:0] clock_cnt;
always @(negedge ck_1356megb)
begin
	clock_cnt <= clock_cnt + 1;
end

// sample at 13,56MHz / 8. The highest signal frequency (subcarrier) is 848,5kHz, i.e. in this case we oversample by a factor of 2
reg [2:0] sample_clock;
always @(negedge ck_1356megb)
begin
	if (sample_clock == 3'd7)
		sample_clock <= 3'd0;
	else
		sample_clock <= sample_clock + 1;
end


reg [11:0] addr;
reg [11:0] start_addr;
reg [2:0] previous_major_mode;
reg write_enable1;
reg write_enable2;
always @(negedge ck_1356megb)
begin
	previous_major_mode <= major_mode;
	if (major_mode == `FPGA_MAJOR_MODE_HF_GET_TRACE)
	begin
		write_enable1 <= 1'b0;
		write_enable2 <= 1'b0;
		if (previous_major_mode != `FPGA_MAJOR_MODE_HF_GET_TRACE) // just switched into GET_TRACE mode
			addr <= start_addr;
		if (clock_cnt == 7'd0)
		begin
			if (addr == 12'd3071)
				addr <= 12'd0;
			else
				addr <= addr + 1;
		end
	end
	else if (major_mode != `FPGA_MAJOR_MODE_OFF)
	begin
		if (trace_enable)
		begin
			if (addr[11] == 1'b0)
			begin
				write_enable1 <= 1'b1;
				write_enable2 <= 1'b0;
			end
			else
			begin
				write_enable1 <= 1'b0;
				write_enable2 <= 1'b1;
			end
			if (sample_clock == 3'b000)
			begin
				if (addr == 12'd3071)
				begin
					addr <= 12'd0;
					write_enable1 <= 1'b1;
					write_enable2 <= 1'b0;
				end
				else
					addr <= addr + 1;
			end
		end
		else
		begin
			write_enable1 <= 1'b0;
			write_enable2 <= 1'b0;
			start_addr <= addr;
		end
	end
	else // major_mode == `FPGA_MAJOR_MODE_OFF
	begin
		write_enable1 <= 1'b0;
		write_enable2 <= 1'b0;
		if (previous_major_mode != `FPGA_MAJOR_MODE_OFF && previous_major_mode != `FPGA_MAJOR_MODE_HF_GET_TRACE) // just switched off
			start_addr <= addr;
	end
end


// (2+1)k RAM
reg [7:0] D_out1, D_out2;
reg [7:0] ram1 [2047:0];
reg [7:0] ram2 [1023:0];

always @(negedge ck_1356megb)
begin
	if (write_enable1)
	begin
		ram1[addr[10:0]] <= adc_d;
		D_out1 <= adc_d;
	end
	else
		D_out1 <= ram1[addr[10:0]];
	if (write_enable2)
	begin
		ram2[addr[9:0]] <= adc_d;
		D_out2 <= adc_d;
	end
	else
		D_out2 <= ram2[addr[9:0]];
end


// SSC communication to ARM
reg ssp_clk;
reg ssp_frame;
reg [7:0] shift_out;

always @(negedge ck_1356megb)
begin
    if(clock_cnt[3:0] == 4'd0)        // update shift register every 16 clock cycles
	begin
		if(clock_cnt[6:4] == 3'd0)    // either load new value
		begin
			if (addr[11] == 1'b0)
				shift_out <= D_out1;
			else
				shift_out <= D_out2;
		end
		else                          // or shift left
            shift_out[7:1] <= shift_out[6:0];
	end

	ssp_clk <= ~clock_cnt[3];       // ssp_clk frequency = 13,56MHz / 16 = 847,5 kHz

	if(clock_cnt[6:4] == 3'b000)    // set ssp_frame for 0...31
		ssp_frame <= 1'b1;
	else
		ssp_frame <= 1'b0;

end

assign ssp_din = shift_out[7];

endmodule