]> git.zerfleddert.de Git - proxmark3-svn/blame - pcb/proxmark3_fix/CAD/change_log.txt
fix "Sending bytes to proxmark failed" after BUTTON_PRESS()
[proxmark3-svn] / pcb / proxmark3_fix / CAD / change_log.txt
CommitLineData
a20fe6d6
ZD
113/11/2015 Change list from original PCB:
2
3Main problem: more then 800 DRC errors when runing that in Eagle. Check out the following changes to make a more reliable PCB. Those are minor cosmetic changes, but ease your life to avoid short circuit.
4
51. Eagle Layout / DRC rules / Masks / Limit: from 0mil to 16mil, thus ordinary GND and signal vias which smaller then 16mil wont be open at solder stop mask layer.
6
72. Eagle Layout / DRC rules / Masks / Stop MAX: from 2mil to 0, this way the solder stop mask wont overlap silkscreen drawings. Also as per PCB assembly houses, it's recommended, they set their own scaling for production.
8
93. Exporting all the parts in the proxmark3 Eagle Layout into a library for minor silkscreen edition: proxmark3_components merged.lbr
10 - Editing components footprint as was overlapping with top stop mask
11
124. Adding top, bottom, in1, in2 layer markings in PCB layout for better manufacturing identification
13
145. Generating 4 layer CAM files
Impressum, Datenschutz