projects / proxmark3-svn / blame
| Commit | Line | Data |
|---|---|---|
| 5e0b213d | 1 | NOTICE: |
| b27c1909 W |
2 | (2014-03-26) |
| 3 | This is now the official Proxmark repository! | |
| 5e0b213d | 4 | |
| b27c1909 | 5 | INTRODUCTION: |
| 770f7345 | 6 | |
| b27c1909 W |
7 | The proxmark3 is a powerful general purpose RFID tool, the size of a deck |
| 8 | of cards, designed to snoop, listen and emulate everything from | |
| 9 | Low Frequency (125kHz) to High Frequency (13.56MHz) tags. | |
| 770f7345 | 10 | |
| b27c1909 W |
11 | This repository contains enough software, logic (for the FPGA), and design |
| 12 | documentation for the hardware that you could, at least in theory, | |
| 13 | do something useful with a proxmark3. | |
| 14 | ||
| 15 | RESOURCES: | |
| 16 | ||
| 17 | * This repository! | |
| 18 | https://github.com/Proxmark/proxmark3 | |
| 19 | ||
| 20 | * The Wiki | |
| 21 | https://github.com/Proxmark/proxmark3/wiki | |
| 22 | ||
| 23 | * The GitHub page | |
| 24 | http://proxmark.github.io/proxmark3/ | |
| 25 | ||
| 26 | * The Forum | |
| 27 | http://www.proxmark.org/forum | |
| 28 | ||
| 29 | * The IRC chanel | |
| 30 | irc.freenode.org #proxmark3 | |
| 31 | -or- | |
| 32 | http://webchat.freenode.net/?channels=#proxmark3 | |
| 33 | ||
| 34 | DEVELOPMENT: | |
| 35 | ||
| 36 | The tools required to build or run the project will vary depending on | |
| 37 | your operating system. Please refer to the Wiki for details. | |
| 38 | ||
| 39 | * https://github.com/Proxmark/proxmark3/wiki | |
| 770f7345 | 40 | |
| b27c1909 | 41 | OBTAINING HARDWARE: |
| 770f7345 | 42 | |
| b27c1909 W |
43 | The Proxmark 3 is available for purcahse (assembled and tested) from the |
| 44 | following locations: | |
| 770f7345 | 45 | |
| b27c1909 W |
46 | * http://proxmark3.com/ |
| 47 | * http://www.xfpga.com/ | |
| 770f7345 | 48 | |
| b27c1909 | 49 | Most of the ultra-low-volume contract assemblers could put |
| 770f7345 | 50 | something like this together with a reasonable yield. A run of around |
| 51 | a dozen units is probably cost-effective. The BOM includes (possibly- | |
| 52 | outdated) component pricing, and everything is available from Digikey | |
| 53 | and the usual distributors. | |
| 54 | ||
| 55 | If you've never assembled a modern circuit board by hand, then this is | |
| 56 | not a good place to start. Some of the components (e.g. the crystals) | |
| 57 | must not be assembled with a soldering iron, and require hot air. | |
| 58 | ||
| 59 | The schematics are included; the component values given are not | |
| 60 | necessarily correct for all situations, but it should be possible to do | |
| 61 | nearly anything you would want with appropriate population options. | |
| 62 | ||
| 63 | The printed circuit board artwork is also available, as Gerbers and an | |
| 64 | Excellon drill file. | |
| 65 | ||
| 66 | ||
| 770f7345 | 67 | LICENSING: |
| 68 | ||
| 69 | This program is free software; you can redistribute it and/or modify | |
| 70 | it under the terms of the GNU General Public License as published by | |
| 71 | the Free Software Foundation; either version 2 of the License, or | |
| 72 | (at your option) any later version. | |
| 73 | ||
| 74 | This program is distributed in the hope that it will be useful, | |
| 75 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 76 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 77 | GNU General Public License for more details. | |
| 78 | ||
| 79 | You should have received a copy of the GNU General Public License | |
| 80 | along with this program; if not, write to the Free Software | |
| 81 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
| 82 | ||
| 83 | ||
| 84 | Jonathan Westhues | |
| 85 | user jwesthues, at host cq.cx | |
| 86 | ||
| 87 | May 2007, Cambridge MA |