]> git.zerfleddert.de Git - proxmark3-svn/blame - README.md
move appveyor.yml
[proxmark3-svn] / README.md
CommitLineData
1ccdd4f6 1# proxmark3: the official Proxmark repository!
770f7345 2
b27c1909
W
3The proxmark3 is a powerful general purpose RFID tool, the size of a deck
4of cards, designed to snoop, listen and emulate everything from
1ccdd4f6 5**Low Frequency (125kHz)** to **High Frequency (13.56MHz)** tags.
770f7345 6
b27c1909
W
7This repository contains enough software, logic (for the FPGA), and design
8documentation for the hardware that you could, at least in theory,
9do something useful with a proxmark3.
10
1ccdd4f6
QP
11## Resources
12
13* [This repository!](https://github.com/Proxmark/proxmark3)
14* [The Wiki](https://github.com/Proxmark/proxmark3/wiki)
15* [The GitHub Pages website](http://proxmark.github.io/proxmark3/)
16* [The Forum](http://www.proxmark.org/forum)
17* The IRC channel: irc.freenode.org #proxmark3 ([chat in your browser](http://webchat.freenode.net/?channels=#proxmark3))
18* [The Homebrew formula repository](https://github.com/Proxmark/homebrew-proxmark3)
b27c1909 19
1ccdd4f6 20## Development
b27c1909
W
21
22The tools required to build or run the project will vary depending on
1ccdd4f6 23your operating system. Please refer to [the wiki](https://github.com/Proxmark/proxmark3/wiki) for details.
770f7345 24
1ccdd4f6 25## Obtaining hardware
770f7345 26
3e7df262 27The Proxmark3 is available for purchase (assembled and tested) from the
b27c1909 28following locations:
770f7345 29
1ccdd4f6
QP
30* [RyscCorp](https://proxmark3.com/) (US)
31* [Elechouse](http://www.elechouse.com/) (HK)
32* [Lab401](https://lab401.com/) (FR)
33* [RFxSecure](http://www.rfxsecure.com/) (SG)
34* [IceSQL](http://proxmark3.tictail.com/) (SE)
3e7df262 35
b27c1909 36Most of the ultra-low-volume contract assemblers could put
770f7345 37something like this together with a reasonable yield. A run of around
38a dozen units is probably cost-effective. The BOM includes (possibly-
39outdated) component pricing, and everything is available from Digikey
40and the usual distributors.
41
42If you've never assembled a modern circuit board by hand, then this is
43not a good place to start. Some of the components (e.g. the crystals)
44must not be assembled with a soldering iron, and require hot air.
45
46The schematics are included; the component values given are not
47necessarily correct for all situations, but it should be possible to do
48nearly anything you would want with appropriate population options.
49
50The printed circuit board artwork is also available, as Gerbers and an
51Excellon drill file.
52
53
1ccdd4f6 54## License
770f7345 55
56This program is free software; you can redistribute it and/or modify
57it under the terms of the GNU General Public License as published by
58the Free Software Foundation; either version 2 of the License, or
59(at your option) any later version.
60
61This program is distributed in the hope that it will be useful,
62but WITHOUT ANY WARRANTY; without even the implied warranty of
63MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
64GNU General Public License for more details.
65
66You should have received a copy of the GNU General Public License
67along with this program; if not, write to the Free Software
68Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
69
70
71Jonathan Westhues
72user jwesthues, at host cq.cx
73
74May 2007, Cambridge MA
Impressum, Datenschutz