]> git.zerfleddert.de Git - proxmark3-svn/blame - bootrom/bootrom.c
Merge remote-tracking branch 'upstream/master'
[proxmark3-svn] / bootrom / bootrom.c
CommitLineData
bd20f8f4 1//-----------------------------------------------------------------------------
2// This code is licensed to you under the terms of the GNU GPL, version 2 or,
3// at your option, any later version. See the LICENSE.txt file for the text of
4// the license.
5//-----------------------------------------------------------------------------
6// Main code for the bootloader
7//-----------------------------------------------------------------------------
8
15c4dc5a 9#include <proxmark3.h>
28fdb04f 10#include "usb_cdc.h"
11#include "cmd.h"
12//#include "usb_hid.h"
13
14void DbpString(char *str) {
15 byte_t len = 0;
16 while (str[len] != 0x00) {
17 len++;
18 }
19 cmd_send(CMD_DEBUG_PRINT_STRING,len,0,0,(byte_t*)str,len);
20}
15c4dc5a 21
22struct common_area common_area __attribute__((section(".commonarea")));
23unsigned int start_addr, end_addr, bootrom_unlocked;
24extern char _bootrom_start, _bootrom_end, _flash_start, _flash_end;
25
26static void ConfigClocks(void)
27{
28 // we are using a 16 MHz crystal as the basis for everything
29 // slow clock runs at 32Khz typical regardless of crystal
30
31 // enable system clock and USB clock
32 AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_PCK | AT91C_PMC_UDP;
33
34 // enable the clock to the following peripherals
35 AT91C_BASE_PMC->PMC_PCER =
36 (1<<AT91C_ID_PIOA) |
37 (1<<AT91C_ID_ADC) |
38 (1<<AT91C_ID_SPI) |
39 (1<<AT91C_ID_SSC) |
40 (1<<AT91C_ID_PWMC) |
41 (1<<AT91C_ID_UDP);
42
0aa4cfc2 43 // worst case scenario, with MAINCK = 16Mhz xtal, startup delay is 1.4ms
44 // if SLCK slow clock runs at its worst case (max) frequency of 42khz
45 // max startup delay = (1.4ms*42k)/8 = 7.356 so round up to 8
15c4dc5a 46
47 // enable main oscillator and set startup delay
48 AT91C_BASE_PMC->PMC_MOR =
0aa4cfc2 49 AT91C_CKGR_MOSCEN |
50 PMC_MAIN_OSC_STARTUP_DELAY(8);
15c4dc5a 51
52 // wait for main oscillator to stabilize
0aa4cfc2 53 while ( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MOSCS) )
15c4dc5a 54 ;
55
0aa4cfc2 56 // PLL output clock frequency in range 80 - 160 MHz needs CKGR_PLL = 00
57 // PLL output clock frequency in range 150 - 180 MHz needs CKGR_PLL = 10
58 // PLL output is MAINCK * multiplier / divisor = 16Mhz * 12 / 2 = 96Mhz
15c4dc5a 59 AT91C_BASE_PMC->PMC_PLLR =
60 PMC_PLL_DIVISOR(2) |
61 PMC_PLL_COUNT_BEFORE_LOCK(0x50) |
62 PMC_PLL_FREQUENCY_RANGE(0) |
63 PMC_PLL_MULTIPLIER(12) |
64 PMC_PLL_USB_DIVISOR(1);
65
66 // wait for PLL to lock
0aa4cfc2 67 while ( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_LOCK) )
15c4dc5a 68 ;
69
70 // we want a master clock (MCK) to be PLL clock / 2 = 96Mhz / 2 = 48Mhz
0aa4cfc2 71 // datasheet recommends that this register is programmed in two operations
15c4dc5a 72 // when changing to PLL, program the prescaler first then the source
0aa4cfc2 73 AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2;
15c4dc5a 74
75 // wait for main clock ready signal
0aa4cfc2 76 while ( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) )
15c4dc5a 77 ;
78
79 // set the source to PLL
0aa4cfc2 80 AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2 | AT91C_PMC_CSS_PLL_CLK;
15c4dc5a 81
82 // wait for main clock ready signal
0aa4cfc2 83 while ( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) )
15c4dc5a 84 ;
85}
86
87static void Fatal(void)
88{
28fdb04f 89 for(;;);
15c4dc5a 90}
91
28fdb04f 92void UsbPacketReceived(uint8_t *packet, int len) {
93 int i, dont_ack=0;
94 UsbCommand* c = (UsbCommand *)packet;
95 volatile uint32_t *p;
96
97 if(len != sizeof(UsbCommand)) {
98 Fatal();
99 }
100
101 uint32_t arg0 = (uint32_t)c->arg[0];
102
103 switch(c->cmd) {
104 case CMD_DEVICE_INFO: {
105 dont_ack = 1;
28fdb04f 106 arg0 = DEVICE_INFO_FLAG_BOOTROM_PRESENT | DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM |
107 DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH;
108 if(common_area.flags.osimage_present) {
109 arg0 |= DEVICE_INFO_FLAG_OSIMAGE_PRESENT;
110 }
28fdb04f 111 cmd_send(CMD_DEVICE_INFO,arg0,1,2,0,0);
112 } break;
113
114 case CMD_SETUP_WRITE: {
115 /* The temporary write buffer of the embedded flash controller is mapped to the
116 * whole memory region, only the last 8 bits are decoded.
117 */
118 p = (volatile uint32_t *)&_flash_start;
119 for(i = 0; i < 12; i++) {
120 p[i+arg0] = c->d.asDwords[i];
121 }
122 } break;
123
124 case CMD_FINISH_WRITE: {
125 uint32_t* flash_mem = (uint32_t*)(&_flash_start);
28fdb04f 126 for (size_t j=0; j<2; j++) {
127 for(i = 0+(64*j); i < 64+(64*j); i++) {
28fdb04f 128 flash_mem[i] = c->d.asDwords[i];
129 }
130
131 uint32_t flash_address = arg0 + (0x100*j);
132
133 /* Check that the address that we are supposed to write to is within our allowed region */
134 if( ((flash_address+AT91C_IFLASH_PAGE_SIZE-1) >= end_addr) || (flash_address < start_addr) ) {
135 /* Disallow write */
136 dont_ack = 1;
28fdb04f 137 cmd_send(CMD_NACK,0,0,0,0,0);
138 } else {
139 uint32_t page_n = (flash_address - ((uint32_t)flash_mem)) / AT91C_IFLASH_PAGE_SIZE;
140 /* Translate address to flash page and do flash, update here for the 512k part */
141 AT91C_BASE_EFC0->EFC_FCR = MC_FLASH_COMMAND_KEY |
142 MC_FLASH_COMMAND_PAGEN(page_n) |
143 AT91C_MC_FCMD_START_PROG;
28fdb04f 144 }
145
146 // Wait until flashing of page finishes
147 uint32_t sr;
148 while(!((sr = AT91C_BASE_EFC0->EFC_FSR) & AT91C_MC_FRDY));
149 if(sr & (AT91C_MC_LOCKE | AT91C_MC_PROGE)) {
150 dont_ack = 1;
28fdb04f 151 cmd_send(CMD_NACK,0,0,0,0,0);
28fdb04f 152 }
153 }
154 } break;
155
156 case CMD_HARDWARE_RESET: {
28fdb04f 157 usb_disable();
158 AT91C_BASE_RSTC->RSTC_RCR = RST_CONTROL_KEY | AT91C_RSTC_PROCRST;
159 } break;
160
161 case CMD_START_FLASH: {
162 if(c->arg[2] == START_FLASH_MAGIC) bootrom_unlocked = 1;
163 else bootrom_unlocked = 0;
164 {
165 int prot_start = (int)&_bootrom_start;
166 int prot_end = (int)&_bootrom_end;
167 int allow_start = (int)&_flash_start;
168 int allow_end = (int)&_flash_end;
169 int cmd_start = c->arg[0];
170 int cmd_end = c->arg[1];
171
172 /* Only allow command if the bootrom is unlocked, or the parameters are outside of the protected
173 * bootrom area. In any case they must be within the flash area.
174 */
175 if( (bootrom_unlocked || ((cmd_start >= prot_end) || (cmd_end < prot_start)))
176 && (cmd_start >= allow_start) && (cmd_end <= allow_end) ) {
177 start_addr = cmd_start;
178 end_addr = cmd_end;
179 } else {
180 start_addr = end_addr = 0;
181 dont_ack = 1;
28fdb04f 182 cmd_send(CMD_NACK,0,0,0,0,0);
183 }
184 }
185 } break;
186
187 default: {
188 Fatal();
189 } break;
190 }
191
192 if(!dont_ack) {
28fdb04f 193 cmd_send(CMD_ACK,arg0,0,0,0,0);
194 }
15c4dc5a 195}
196
197static void flash_mode(int externally_entered)
198{
199 start_addr = 0;
200 end_addr = 0;
201 bootrom_unlocked = 0;
28fdb04f 202 byte_t rx[sizeof(UsbCommand)];
203 size_t rx_len;
204
205 usb_enable();
206 for (volatile size_t i=0; i<0x100000; i++);
15c4dc5a 207
15c4dc5a 208 for(;;) {
209 WDT_HIT();
210
28fdb04f 211 if (usb_poll()) {
212 rx_len = usb_read(rx,sizeof(UsbCommand));
213 if (rx_len) {
28fdb04f 214 UsbPacketReceived(rx,rx_len);
215 }
216 }
217
15c4dc5a 218 if(!externally_entered && !BUTTON_PRESS()) {
219 /* Perform a reset to leave flash mode */
28fdb04f 220 usb_disable();
15c4dc5a 221 LED_B_ON();
222 AT91C_BASE_RSTC->RSTC_RCR = RST_CONTROL_KEY | AT91C_RSTC_PROCRST;
223 for(;;);
224 }
225 if(externally_entered && BUTTON_PRESS()) {
226 /* Let the user's button press override the automatic leave */
227 externally_entered = 0;
228 }
229 }
230}
231
28fdb04f 232extern uint32_t _osimage_entry;
15c4dc5a 233void BootROM(void)
234{
235 //------------
236 // First set up all the I/O pins; GPIOs configured directly, other ones
237 // just need to be assigned to the appropriate peripheral.
238
239 // Kill all the pullups, especially the one on USB D+; leave them for
240 // the unused pins, though.
241 AT91C_BASE_PIOA->PIO_PPUDR =
242 GPIO_USB_PU |
243 GPIO_LED_A |
244 GPIO_LED_B |
245 GPIO_LED_C |
246 GPIO_LED_D |
247 GPIO_FPGA_DIN |
248 GPIO_FPGA_DOUT |
249 GPIO_FPGA_CCLK |
250 GPIO_FPGA_NINIT |
251 GPIO_FPGA_NPROGRAM |
252 GPIO_FPGA_DONE |
253 GPIO_MUXSEL_HIPKD |
254 GPIO_MUXSEL_HIRAW |
255 GPIO_MUXSEL_LOPKD |
256 GPIO_MUXSEL_LORAW |
257 GPIO_RELAY |
258 GPIO_NVDD_ON;
259 // (and add GPIO_FPGA_ON)
260 // These pins are outputs
261 AT91C_BASE_PIOA->PIO_OER =
262 GPIO_LED_A |
263 GPIO_LED_B |
264 GPIO_LED_C |
265 GPIO_LED_D |
266 GPIO_RELAY |
267 GPIO_NVDD_ON;
268 // PIO controls the following pins
269 AT91C_BASE_PIOA->PIO_PER =
270 GPIO_USB_PU |
271 GPIO_LED_A |
272 GPIO_LED_B |
273 GPIO_LED_C |
274 GPIO_LED_D;
275
28fdb04f 276// USB_D_PLUS_PULLUP_OFF();
277 usb_disable();
15c4dc5a 278 LED_D_OFF();
279 LED_C_ON();
280 LED_B_OFF();
281 LED_A_OFF();
282
24b182d0 283 AT91C_BASE_EFC0->EFC_FMR =
0aa4cfc2 284 AT91C_MC_FWS_1FWS |
24b182d0 285 MC_FLASH_MODE_MASTER_CLK_IN_MHZ(48);
15c4dc5a 286
287 // Initialize all system clocks
288 ConfigClocks();
289
290 LED_A_ON();
291
292 int common_area_present = 0;
293 switch(AT91C_BASE_RSTC->RSTC_RSR & AT91C_RSTC_RSTTYP) {
294 case AT91C_RSTC_RSTTYP_WATCHDOG:
295 case AT91C_RSTC_RSTTYP_SOFTWARE:
296 case AT91C_RSTC_RSTTYP_USER:
297 /* In these cases the common_area in RAM should be ok, retain it if it's there */
298 if(common_area.magic == COMMON_AREA_MAGIC && common_area.version == 1) {
299 common_area_present = 1;
300 }
301 break;
302 default: /* Otherwise, initialize it from scratch */
303 break;
304 }
305
306 if(!common_area_present){
307 /* Common area not ok, initialize it */
308 int i; for(i=0; i<sizeof(common_area); i++) { /* Makeshift memset, no need to drag util.c into this */
309 ((char*)&common_area)[i] = 0;
310 }
311 common_area.magic = COMMON_AREA_MAGIC;
312 common_area.version = 1;
313 common_area.flags.bootrom_present = 1;
314 }
315
316 common_area.flags.bootrom_present = 1;
317 if(common_area.command == COMMON_AREA_COMMAND_ENTER_FLASH_MODE) {
318 common_area.command = COMMON_AREA_COMMAND_NONE;
319 flash_mode(1);
320 } else if(BUTTON_PRESS()) {
321 flash_mode(0);
28fdb04f 322 } else if(_osimage_entry == 0xffffffffU) {
15c4dc5a 323 flash_mode(1);
324 } else {
325 // jump to Flash address of the osimage entry point (LSBit set for thumb mode)
902cb3c0 326 __asm("bx %0\n" : : "r" ( ((int)&_osimage_entry) | 0x1 ) );
15c4dc5a 327 }
328}
Impressum, Datenschutz