Added iClass eavesdrop support for Proxmark3
[proxmark3-svn] / include / usb_cmd.h
CommitLineData
e30c654b 1//-----------------------------------------------------------------------------
e30c654b 2// Jonathan Westhues, Mar 2006
3// Edits by Gerhard de Koning Gans, Sep 2007
bd20f8f4 4//
5// This code is licensed to you under the terms of the GNU GPL, version 2 or,
6// at your option, any later version. See the LICENSE.txt file for the text of
7// the license.
8//-----------------------------------------------------------------------------
9// Definitions for all the types of commands that may be sent over USB; our
10// own protocol.
e30c654b 11//-----------------------------------------------------------------------------
12
13#ifndef __USB_CMD_H
14#define __USB_CMD_H
15#ifdef _MSC_VER
16typedef DWORD uint32_t;
17typedef BYTE uint8_t;
18#define PACKED
19// stuff
20#else
21#include <stdint.h>
22#include <stdbool.h>
23#define PACKED __attribute__((packed))
24#endif
25
26typedef struct {
27 uint32_t cmd;
28 uint32_t arg[3];
29 union {
30 uint8_t asBytes[48];
31 uint32_t asDwords[12];
32 } d;
33} PACKED UsbCommand;
34
35// For the bootloader
36#define CMD_DEVICE_INFO 0x0000
37#define CMD_SETUP_WRITE 0x0001
38#define CMD_FINISH_WRITE 0x0003
39#define CMD_HARDWARE_RESET 0x0004
40#define CMD_START_FLASH 0x0005
41#define CMD_NACK 0x00fe
42#define CMD_ACK 0x00ff
43
44// For general mucking around
45#define CMD_DEBUG_PRINT_STRING 0x0100
46#define CMD_DEBUG_PRINT_INTEGERS 0x0101
47#define CMD_DEBUG_PRINT_BYTES 0x0102
48#define CMD_LCD_RESET 0x0103
49#define CMD_LCD 0x0104
50#define CMD_BUFF_CLEAR 0x0105
51#define CMD_READ_MEM 0x0106
52#define CMD_VERSION 0x0107
53
54// For low-frequency tags
55#define CMD_READ_TI_TYPE 0x0202
56#define CMD_WRITE_TI_TYPE 0x0203
57#define CMD_DOWNLOADED_RAW_BITS_TI_TYPE 0x0204
58#define CMD_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0205
59#define CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0206
60#define CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K 0x0207
61#define CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K 0x0208
62#define CMD_DOWNLOADED_SIM_SAMPLES_125K 0x0209
63#define CMD_SIMULATE_TAG_125K 0x020A
64#define CMD_HID_DEMOD_FSK 0x020B
65#define CMD_HID_SIM_TAG 0x020C
66#define CMD_SET_LF_DIVISOR 0x020D
67#define CMD_LF_SIMULATE_BIDIR 0x020E
68#define CMD_SET_ADC_MUX 0x020F
69/* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */
70
71// For the 13.56 MHz tags
72#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 0x0300
73#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443 0x0301
74#define CMD_READ_SRI512_TAG 0x0303
75#define CMD_READ_SRIX4K_TAG 0x0304
76#define CMD_READER_ISO_15693 0x0310
77#define CMD_SIMTAG_ISO_15693 0x0311
9455b51c 78#define CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693 0x0312
79#define CMD_ISO_15693_COMMAND 0x0313
80#define CMD_ISO_15693_COMMAND_DONE 0x0314
81#define CMD_ISO_15693_FIND_AFI 0x0315
82#define CMD_ISO_15693_DEBUG 0x0316
e30c654b 83#define CMD_SIMULATE_TAG_HF_LISTEN 0x0380
84#define CMD_SIMULATE_TAG_ISO_14443 0x0381
85#define CMD_SNOOP_ISO_14443 0x0382
86#define CMD_SNOOP_ISO_14443a 0x0383
87#define CMD_SIMULATE_TAG_ISO_14443a 0x0384
88#define CMD_READER_ISO_14443a 0x0385
89#define CMD_SIMULATE_MIFARE_CARD 0x0386
90#define CMD_SIMULATE_TAG_LEGIC_RF 0x0387
91#define CMD_READER_LEGIC_RF 0x0388
3612a8a8 92#define CMD_WRITER_LEGIC_RF 0x0399
e30c654b 93#define CMD_READER_MIFARE 0x0389
cee5a30d 94#define CMD_SNOOP_ICLASS 0x0392
e30c654b 95
96// For measurements of the antenna tuning
97#define CMD_MEASURE_ANTENNA_TUNING 0x0400
98#define CMD_MEASURE_ANTENNA_TUNING_HF 0x0401
99#define CMD_MEASURED_ANTENNA_TUNING 0x0410
100#define CMD_LISTEN_READER_FIELD 0x0420
101
102// For direct FPGA control
103#define CMD_FPGA_MAJOR_MODE_OFF 0x0500
104
105#define CMD_UNKNOWN 0xFFFF
106
107// CMD_DEVICE_INFO response packet has flags in arg[0], flag definitions:
108/* Whether a bootloader that understands the common_area is present */
109#define DEVICE_INFO_FLAG_BOOTROM_PRESENT (1<<0)
110
111/* Whether a osimage that understands the common_area is present */
112#define DEVICE_INFO_FLAG_OSIMAGE_PRESENT (1<<1)
113
114/* Set if the bootloader is currently executing */
115#define DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM (1<<2)
116
117/* Set if the OS is currently executing */
118#define DEVICE_INFO_FLAG_CURRENT_MODE_OS (1<<3)
119
120/* Set if this device understands the extend start flash command */
121#define DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH (1<<4)
122
123/* CMD_START_FLASH may have three arguments: start of area to flash,
124 end of area to flash, optional magic.
125 The bootrom will not allow to overwrite itself unless this magic
126 is given as third parameter */
127
128#define START_FLASH_MAGIC 0x54494f44 // 'DOIT'
129
130#endif
Impressum, Datenschutz