| | 1 | //-----------------------------------------------------------------------------\r |
| | 2 | // Definitions of interest to most of the software for this project.\r |
| | 3 | // Jonathan Westhues, Mar 2006\r |
| | 4 | //-----------------------------------------------------------------------------\r |
| | 5 | \r |
| | 6 | #ifndef __PROXMARK3_H\r |
| | 7 | #define __PROXMARK3_H\r |
| | 8 | \r |
| | 9 | // Might as well have the hardware-specific defines everywhere.\r |
| | 10 | #include <at91sam7s512.h>\r |
| | 11 | #include <config_gpio.h>\r |
| | 12 | \r |
| | 13 | #define WDT_HIT() AT91C_BASE_WDTC->WDTC_WDCR = 0xa5000001\r |
| | 14 | \r |
| | 15 | #define PWM_CH_MODE_PRESCALER(x) ((x)<<0)\r |
| | 16 | #define PWM_CHANNEL(x) (1<<(x))\r |
| | 17 | \r |
| | 18 | #define TC_CMR_TCCLKS_TIMER_CLOCK1 (0<<0)\r |
| | 19 | #define TC_CMR_TCCLKS_TIMER_CLOCK2 (1<<0)\r |
| | 20 | #define TC_CMR_TCCLKS_TIMER_CLOCK3 (2<<0)\r |
| | 21 | #define TC_CMR_TCCLKS_TIMER_CLOCK4 (3<<0)\r |
| | 22 | #define TC_CMR_TCCLKS_TIMER_CLOCK5 (4<<0)\r |
| | 23 | \r |
| | 24 | #define ADC_CHAN_LF 4\r |
| | 25 | #define ADC_CHAN_HF 5\r |
| | 26 | #define ADC_MODE_PRESCALE(x) ((x)<<8)\r |
| | 27 | #define ADC_MODE_STARTUP_TIME(x) ((x)<<16)\r |
| | 28 | #define ADC_MODE_SAMPLE_HOLD_TIME(x) ((x)<<24)\r |
| | 29 | #define ADC_CHANNEL(x) (1<<(x))\r |
| | 30 | #define ADC_END_OF_CONVERSION(x) (1<<(x))\r |
| | 31 | \r |
| | 32 | #define SSC_CLOCK_MODE_START(x) ((x)<<8)\r |
| | 33 | #define SSC_FRAME_MODE_WORDS_PER_TRANSFER(x) ((x)<<8)\r |
| | 34 | #define SSC_CLOCK_MODE_SELECT(x) ((x)<<0)\r |
| | 35 | #define SSC_FRAME_MODE_BITS_IN_WORD(x) (((x)-1)<<0)\r |
| | 36 | \r |
| | 37 | #define MC_FLASH_COMMAND_KEY ((0x5a)<<24)\r |
| | 38 | #define MC_FLASH_STATUS_READY (1<<0)\r |
| | 39 | #define MC_FLASH_MODE_FLASH_WAIT_STATES(x) ((x)<<8)\r |
| | 40 | #define MC_FLASH_MODE_MASTER_CLK_IN_MHZ(x) ((x)<<16)\r |
| | 41 | #define MC_FLASH_COMMAND_PAGEN(x) ((x)<<8)\r |
| | 42 | \r |
| | 43 | #define RST_CONTROL_KEY (0xa5<<24)\r |
| | 44 | \r |
| | 45 | #define PMC_MAIN_OSC_ENABLE (1<<0)\r |
| | 46 | #define PMC_MAIN_OSC_STABILIZED (1<<0)\r |
| | 47 | #define PMC_MAIN_OSC_PLL_LOCK (1<<2)\r |
| | 48 | #define PMC_MAIN_OSC_MCK_READY (1<<3)\r |
| | 49 | \r |
| | 50 | #define PMC_MAIN_OSC_STARTUP_DELAY(x) ((x)<<8)\r |
| | 51 | #define PMC_PLL_DIVISOR(x) (x)\r |
| | 52 | #define PMC_CLK_PRESCALE_DIV_2 (1<<2)\r |
| | 53 | #define PMC_PLL_MULTIPLIER(x) (((x)-1)<<16)\r |
| | 54 | #define PMC_PLL_COUNT_BEFORE_LOCK(x) ((x)<<8)\r |
| | 55 | #define PMC_PLL_FREQUENCY_RANGE(x) ((x)<<14)\r |
| | 56 | #define PMC_PLL_USB_DIVISOR(x) ((x)<<28)\r |
| | 57 | \r |
| | 58 | #define UDP_INTERRUPT_ENDPOINT(x) (1<<(x))\r |
| | 59 | #define UDP_CSR_BYTES_RECEIVED(x) (((x) >> 16) & 0x7ff)\r |
| | 60 | //**************************************************************\r |
| | 61 | \r |
| | 62 | #define LOW(x) AT91C_BASE_PIOA->PIO_CODR = (x)\r |
| | 63 | #define HIGH(x) AT91C_BASE_PIOA->PIO_SODR = (x)\r |
| | 64 | \r |
| | 65 | #define SPI_FPGA_MODE 0\r |
| | 66 | #define SPI_LCD_MODE 1\r |
| | 67 | \r |
| | 68 | typedef unsigned long DWORD;\r |
| | 69 | typedef signed long SDWORD;\r |
| | 70 | typedef unsigned long long QWORD;\r |
| | 71 | typedef int BOOL;\r |
| | 72 | typedef unsigned char BYTE;\r |
| | 73 | typedef signed char SBYTE;\r |
| | 74 | typedef unsigned short WORD;\r |
| | 75 | typedef signed short SWORD;\r |
| | 76 | #define TRUE 1\r |
| | 77 | #define FALSE 0\r |
| | 78 | \r |
| | 79 | #include <usb_cmd.h>\r |
| | 80 | \r |
| | 81 | //#define PACKED __attribute__((__packed__))\r |
| | 82 | \r |
| | 83 | #define USB_D_PLUS_PULLUP_ON() { \\r |
| | 84 | HIGH(GPIO_USB_PU); \\r |
| | 85 | AT91C_BASE_PIOA->PIO_OER = GPIO_USB_PU; \\r |
| | 86 | }\r |
| | 87 | #define USB_D_PLUS_PULLUP_OFF() AT91C_BASE_PIOA->PIO_ODR = GPIO_USB_PU\r |
| | 88 | \r |
| | 89 | #define LED_A_ON() HIGH(GPIO_LED_A)\r |
| | 90 | #define LED_A_OFF() LOW(GPIO_LED_A)\r |
| | 91 | #define LED_B_ON() HIGH(GPIO_LED_B)\r |
| | 92 | #define LED_B_OFF() LOW(GPIO_LED_B)\r |
| | 93 | #define LED_C_ON() HIGH(GPIO_LED_C)\r |
| | 94 | #define LED_C_OFF() LOW(GPIO_LED_C)\r |
| | 95 | #define LED_D_ON() HIGH(GPIO_LED_D)\r |
| | 96 | #define LED_D_OFF() LOW(GPIO_LED_D)\r |
| | 97 | #define RELAY_ON() HIGH(GPIO_RELAY)\r |
| | 98 | #define RELAY_OFF() LOW(GPIO_RELAY)\r |
| | 99 | #define BUTTON_PRESS() !(AT91C_BASE_PIOA->PIO_PDSR & GPIO_BUTTON)\r |
| | 100 | //--------------------------------\r |
| | 101 | // USB declarations\r |
| | 102 | \r |
| | 103 | void UsbSendPacket(BYTE *packet, int len);\r |
| | 104 | BOOL UsbConnected();\r |
| | 105 | BOOL UsbPoll(BOOL blinkLeds);\r |
| | 106 | void UsbStart(void);\r |
| | 107 | \r |
| | 108 | // This function is provided by the apps/bootrom, and called from UsbPoll\r |
| | 109 | // if data are available.\r |
| | 110 | void UsbPacketReceived(BYTE *packet, int len);\r |
| | 111 | \r |
| | 112 | #define VERSION_INFORMATION_MAGIC 0x56334d50\r |
| | 113 | struct version_information {\r |
| | 114 | int magic; /* Magic sequence to identify this as a correct version information structure. Must be VERSION_INFORMATION_MAGIC */\r |
| | 115 | char versionversion; /* Must be 1 */\r |
| | 116 | char present; /* 1 if the version information could be created at compile time, otherwise 0 and the remaining fields (except for magic) are empty */\r |
| | 117 | char clean; /* 1: Tree was clean, no local changes. 0: Tree was unclean. 2: Couldn't be determined */\r |
| | 118 | char svnversion[9]; /* String with the SVN revision */\r |
| | 119 | char buildtime[30]; /* string with the build time */\r |
| | 120 | } __attribute__((packed));\r |
| | 121 | \r |
| | 122 | #define COMMON_AREA_MAGIC 0x43334d50\r |
| | 123 | #define COMMON_AREA_COMMAND_NONE 0\r |
| | 124 | #define COMMON_AREA_COMMAND_ENTER_FLASH_MODE 1\r |
| | 125 | struct common_area {\r |
| | 126 | int magic; /* Magic sequence, to distinguish against random uninitialized memory */\r |
| | 127 | char version; /* Must be 1 */\r |
| | 128 | char command;\r |
| | 129 | struct {\r |
| | 130 | unsigned int bootrom_present:1; /* Set when a bootrom that is capable of parsing the common area is present */\r |
| | 131 | unsigned int osimage_present:1; /* Set when a osimage that is capable of parsing the common area is present */\r |
| | 132 | } __attribute__((packed)) flags;\r |
| | 133 | int arg1, arg2;\r |
| | 134 | } __attribute__((packed));\r |
| | 135 | \r |
| | 136 | #endif\r |
projects / proxmark3-svn / blame_incremental