]> git.zerfleddert.de Git - proxmark3-svn/blame_incremental - include/usb_cmd.h
FIX: increased the limit to 0xE6 for MIFARE_ULEV1_FASTREAD
[proxmark3-svn] / include / usb_cmd.h
... / ...
CommitLineData
1//-----------------------------------------------------------------------------
2// Jonathan Westhues, Mar 2006
3// Edits by Gerhard de Koning Gans, Sep 2007
4//
5// This code is licensed to you under the terms of the GNU GPL, version 2 or,
6// at your option, any later version. See the LICENSE.txt file for the text of
7// the license.
8//-----------------------------------------------------------------------------
9// Definitions for all the types of commands that may be sent over USB; our
10// own protocol.
11//-----------------------------------------------------------------------------
12
13#ifndef __USB_CMD_H
14#define __USB_CMD_H
15#ifdef _MSC_VER
16typedef DWORD uint32_t;
17typedef BYTE uint8_t;
18#define PACKED
19// stuff
20#else
21#include <stdint.h>
22#include <stdbool.h>
23#define PACKED __attribute__((packed))
24#endif
25
26#define USB_CMD_DATA_SIZE 512
27
28typedef struct {
29 uint64_t cmd;
30 uint64_t arg[3];
31 union {
32 uint8_t asBytes[USB_CMD_DATA_SIZE];
33 uint32_t asDwords[USB_CMD_DATA_SIZE/4];
34 } d;
35} PACKED UsbCommand;
36// A struct used to send sample-configs over USB
37typedef struct{
38 uint8_t decimation;
39 uint8_t bits_per_sample;
40 bool averaging;
41 int divisor;
42 int trigger_threshold;
43} sample_config;
44
45// For the bootloader
46#define CMD_DEVICE_INFO 0x0000
47#define CMD_SETUP_WRITE 0x0001
48#define CMD_FINISH_WRITE 0x0003
49#define CMD_HARDWARE_RESET 0x0004
50#define CMD_START_FLASH 0x0005
51#define CMD_NACK 0x00fe
52#define CMD_ACK 0x00ff
53
54// For general mucking around
55#define CMD_DEBUG_PRINT_STRING 0x0100
56#define CMD_DEBUG_PRINT_INTEGERS 0x0101
57#define CMD_DEBUG_PRINT_BYTES 0x0102
58#define CMD_LCD_RESET 0x0103
59#define CMD_LCD 0x0104
60#define CMD_BUFF_CLEAR 0x0105
61#define CMD_READ_MEM 0x0106
62#define CMD_VERSION 0x0107
63
64// For low-frequency tags
65#define CMD_READ_TI_TYPE 0x0202
66#define CMD_WRITE_TI_TYPE 0x0203
67#define CMD_DOWNLOADED_RAW_BITS_TI_TYPE 0x0204
68#define CMD_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0205
69#define CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0206
70#define CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K 0x0207
71#define CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K 0x0208
72#define CMD_DOWNLOADED_SIM_SAMPLES_125K 0x0209
73#define CMD_SIMULATE_TAG_125K 0x020A
74#define CMD_HID_DEMOD_FSK 0x020B
75#define CMD_HID_SIM_TAG 0x020C
76#define CMD_SET_LF_DIVISOR 0x020D
77#define CMD_LF_SIMULATE_BIDIR 0x020E
78#define CMD_SET_ADC_MUX 0x020F
79#define CMD_HID_CLONE_TAG 0x0210
80#define CMD_EM410X_WRITE_TAG 0x0211
81#define CMD_INDALA_CLONE_TAG 0x0212
82// for 224 bits UID
83#define CMD_INDALA_CLONE_TAG_L 0x0213
84#define CMD_T55XX_READ_BLOCK 0x0214
85#define CMD_T55XX_WRITE_BLOCK 0x0215
86#define CMD_T55XX_READ_TRACE 0x0216
87#define CMD_PCF7931_READ 0x0217
88#define CMD_EM4X_READ_WORD 0x0218
89#define CMD_EM4X_WRITE_WORD 0x0219
90#define CMD_IO_DEMOD_FSK 0x021A
91#define CMD_IO_CLONE_TAG 0x021B
92#define CMD_EM410X_DEMOD 0x021c
93// Sampling configuration for LF reader/snooper
94#define CMD_SET_LF_SAMPLING_CONFIG 0x021d
95#define CMD_FSK_SIM_TAG 0x021E
96#define CMD_ASK_SIM_TAG 0x021F
97#define CMD_PSK_SIM_TAG 0x0220
98
99/* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */
100
101// For the 13.56 MHz tags
102#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 0x0300
103#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443 0x0301
104#define CMD_READ_SRI512_TAG 0x0303
105#define CMD_READ_SRIX4K_TAG 0x0304
106#define CMD_ISO_14443B_COMMAND 0x0305
107#define CMD_READER_ISO_15693 0x0310
108#define CMD_SIMTAG_ISO_15693 0x0311
109#define CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693 0x0312
110#define CMD_ISO_15693_COMMAND 0x0313
111#define CMD_ISO_15693_COMMAND_DONE 0x0314
112#define CMD_ISO_15693_FIND_AFI 0x0315
113#define CMD_ISO_15693_DEBUG 0x0316
114#define CMD_LF_SNOOP_RAW_ADC_SAMPLES 0x0317
115
116// For Hitag2 transponders
117#define CMD_SNOOP_HITAG 0x0370
118#define CMD_SIMULATE_HITAG 0x0371
119#define CMD_READER_HITAG 0x0372
120
121#define CMD_SIMULATE_TAG_HF_LISTEN 0x0380
122#define CMD_SIMULATE_TAG_ISO_14443 0x0381
123#define CMD_SNOOP_ISO_14443 0x0382
124#define CMD_SNOOP_ISO_14443a 0x0383
125#define CMD_SIMULATE_TAG_ISO_14443a 0x0384
126#define CMD_READER_ISO_14443a 0x0385
127#define CMD_SIMULATE_TAG_LEGIC_RF 0x0387
128#define CMD_READER_LEGIC_RF 0x0388
129#define CMD_WRITER_LEGIC_RF 0x0389
130#define CMD_EPA_PACE_COLLECT_NONCE 0x038A
131//#define CMD_EPA_ 0x038B
132
133#define CMD_SNOOP_ICLASS 0x0392
134#define CMD_SIMULATE_TAG_ICLASS 0x0393
135#define CMD_READER_ICLASS 0x0394
136#define CMD_READER_ICLASS_REPLAY 0x0395
137#define CMD_ICLASS_ISO14443A_WRITE 0x0397
138#define CMD_ICLASS_EML_MEMSET 0x0398
139
140// For measurements of the antenna tuning
141#define CMD_MEASURE_ANTENNA_TUNING 0x0400
142#define CMD_MEASURE_ANTENNA_TUNING_HF 0x0401
143#define CMD_MEASURED_ANTENNA_TUNING 0x0410
144#define CMD_LISTEN_READER_FIELD 0x0420
145
146// For direct FPGA control
147#define CMD_FPGA_MAJOR_MODE_OFF 0x0500
148
149// For mifare commands
150#define CMD_MIFARE_SET_DBGMODE 0x0600
151#define CMD_MIFARE_EML_MEMCLR 0x0601
152#define CMD_MIFARE_EML_MEMSET 0x0602
153#define CMD_MIFARE_EML_MEMGET 0x0603
154#define CMD_MIFARE_EML_CARDLOAD 0x0604
155
156// magic chinese card commands
157#define CMD_MIFARE_CSETBLOCK 0x0605
158#define CMD_MIFARE_CGETBLOCK 0x0606
159#define CMD_MIFARE_CIDENT 0x0607
160
161#define CMD_SIMULATE_MIFARE_CARD 0x0610
162
163#define CMD_READER_MIFARE 0x0611
164#define CMD_MIFARE_NESTED 0x0612
165
166#define CMD_MIFARE_READBL 0x0620
167#define CMD_MIFAREU_READBL 0x0720
168
169#define CMD_MIFARE_READSC 0x0621
170#define CMD_MIFAREU_READCARD 0x0721
171
172#define CMD_MIFARE_WRITEBL 0x0622
173#define CMD_MIFAREU_WRITEBL 0x0722
174#define CMD_MIFAREU_WRITEBL_COMPAT 0x0723
175
176#define CMD_MIFARE_CHKKEYS 0x0623
177
178#define CMD_MIFARE_SNIFFER 0x0630
179
180//ultralightC
181#define CMD_MIFAREUC_AUTH1 0x0724
182#define CMD_MIFAREUC_AUTH2 0x0725
183#define CMD_MIFAREUC_READCARD 0x0726
184#define CMD_MIFAREUC_SETPWD 0x0727
185#define CMD_MIFAREU_SETUID 0x0728
186
187// mifare desfire
188#define CMD_MIFARE_DESFIRE_READBL 0x0728
189#define CMD_MIFARE_DESFIRE_WRITEBL 0x0729
190#define CMD_MIFARE_DESFIRE_AUTH1 0x072a
191#define CMD_MIFARE_DESFIRE_AUTH2 0x072b
192#define CMD_MIFARE_DES_READER 0x072c
193#define CMD_MIFARE_DESFIRE_INFO 0x072d
194#define CMD_MIFARE_DESFIRE 0x072e
195
196#define CMD_MIFARE_COLLECT_NONCES 0x072f
197
198#define CMD_UNKNOWN 0xFFFF
199
200
201//Mifare simulation flags
202#define FLAG_INTERACTIVE 0x01
203#define FLAG_4B_UID_IN_DATA 0x02
204#define FLAG_7B_UID_IN_DATA 0x04
205#define FLAG_NR_AR_ATTACK 0x08
206
207
208//Iclass reader flags
209#define FLAG_ICLASS_READER_ONLY_ONCE 0x01
210#define FLAG_ICLASS_READER_CC 0x02
211#define FLAG_ICLASS_READER_CSN 0x04
212#define FLAG_ICLASS_READER_CONF 0x08
213#define FLAG_ICLASS_READER_AA 0x10
214
215
216
217// CMD_DEVICE_INFO response packet has flags in arg[0], flag definitions:
218/* Whether a bootloader that understands the common_area is present */
219#define DEVICE_INFO_FLAG_BOOTROM_PRESENT (1<<0)
220
221/* Whether a osimage that understands the common_area is present */
222#define DEVICE_INFO_FLAG_OSIMAGE_PRESENT (1<<1)
223
224/* Set if the bootloader is currently executing */
225#define DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM (1<<2)
226
227/* Set if the OS is currently executing */
228#define DEVICE_INFO_FLAG_CURRENT_MODE_OS (1<<3)
229
230/* Set if this device understands the extend start flash command */
231#define DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH (1<<4)
232
233/* CMD_START_FLASH may have three arguments: start of area to flash,
234 end of area to flash, optional magic.
235 The bootrom will not allow to overwrite itself unless this magic
236 is given as third parameter */
237
238#define START_FLASH_MAGIC 0x54494f44 // 'DOIT'
239
240#endif
Impressum, Datenschutz