// only, since we are receiving, not transmitting).
// Signal field is off with the appropriate LED
LED_D_OFF();
- FpgaWriteConfWord(
- FPGA_MAJOR_MODE_HF_SIMULATOR | FPGA_HF_SIMULATOR_NO_MODULATION);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_SIMULATOR | FPGA_HF_SIMULATOR_NO_MODULATION);
// Now run a `software UART' on the stream of incoming samples.
int cmdsRecvd = 0;
+ FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
memset(receivedCmd, 0x44, 400);
CodeIso14443bAsTag(response1, sizeof(response1));
// Modulate BPSK
// Signal field is off with the appropriate LED
LED_D_OFF();
- FpgaWriteConfWord(
- FPGA_MAJOR_MODE_HF_SIMULATOR | FPGA_HF_SIMULATOR_MODULATE_BPSK);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_SIMULATOR | FPGA_HF_SIMULATOR_MODULATE_BPSK);
AT91C_BASE_SSC->SSC_THR = 0xff;
FpgaSetupSsc();
{
uint8_t i = 0x00;
+ FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
// Make sure that we start from off, since the tags are stateful;
// confusing things will happen if we don't reset them between reads.
LED_D_OFF();
// response from the tag.
int triggered = TRUE;
+ FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
// The command (reader -> tag) that we're working on receiving.
uint8_t *receivedCmd = (uint8_t *)(BigBuf) + DEMOD_TRACE_SIZE;
// The response (tag -> reader) that we're working on receiving.
void SendRawCommand14443B(uint32_t datalen, uint32_t recv,uint8_t powerfield, uint8_t data[])
{
+ FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
if(!powerfield)
{
// Make sure that we start from off, since the tags are stateful;