#include <stdlib.h>
#include "proxmark3.h"
#include "sleep.h"
-//#include "proxusb.h"
#include "flash.h"
#include "elf.h"
#include "proxendian.h"
{
UsbCommand c;
c.cmd = CMD_DEVICE_INFO;
-// SendCommand_(&c);
SendCommand(&c);
UsbCommand resp;
ReceiveCommand(&resp);
}
// Enter the bootloader to be able to start flashing
-static int enter_bootloader(void)
+static int enter_bootloader(char *serial_port_name)
{
uint32_t state;
SendCommand(&c);
fprintf(stderr,"Press and hold down button NOW if your bootloader requires it.\n");
}
- fprintf(stderr,"Waiting for Proxmark to reappear on USB...");
-
+ msleep(100);
CloseProxmark();
- sleep(1);
- while (!OpenProxmark(0)) {
+
+ fprintf(stderr,"Waiting for Proxmark to reappear on %s",serial_port_name);
+ do {
sleep(1);
fprintf(stderr, ".");
- }
+ } while (!OpenProxmark(0));
fprintf(stderr," Found.\n");
return 0;
}
// Go into flashing mode
-int flash_start_flashing(int enable_bl_writes)
+int flash_start_flashing(int enable_bl_writes,char *serial_port_name)
{
uint32_t state;
- if (enter_bootloader() < 0)
+ if (enter_bootloader(serial_port_name) < 0)
return -1;
if (get_proxmark_state(&state) < 0)
c.arg[2] = 0;
}
SendCommand(&c);
-// SendCommand_(&c);
return wait_for_ack();
} else {
fprintf(stderr, "Note: Your bootloader does not understand the new START_FLASH command\n");
memset(block_buf, 0xFF, BLOCK_SIZE);
memcpy(block_buf, data, length);
UsbCommand c;
-/*
- c.cmd = {CMD_SETUP_WRITE};
- for (int i = 0; i < 240; i += 48) {
- memcpy(c.d.asBytes, block_buf + i, 48);
- c.arg[0] = i / 4;
- SendCommand(&c);
-// SendCommand_(&c);
- if (wait_for_ack() < 0) {
- return -1;
- }
- }
-*/
c.cmd = CMD_FINISH_WRITE;
c.arg[0] = address;
-// memcpy(c.d.asBytes, block_buf+240, 16);
-// SendCommand_(&c);
memcpy(c.d.asBytes, block_buf, length);
SendCommand(&c);
return wait_for_ack();
// just reset the unit
int flash_stop_flashing(void) {
UsbCommand c = {CMD_HARDWARE_RESET};
-// SendCommand_(&c);
SendCommand(&c);
+ msleep(100);
return 0;
}