-//1. Create Method to Read sectors/blocks 0,1,2 and Send to client
-void IClass_iso14443A_GetPublic(uint8_t arg0) {
- uint8_t act_all[] = { 0x0a };
- uint8_t identify[] = { 0x0c };
- uint8_t select[] = { 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
- uint8_t readcheck_cc[]= { 0x88, 0x02 };
- //uint8_t read[] = { 0x0c, 0x00, 0x00, 0x00 };
- uint8_t card_data[24]={0};
-
- //bool read_success=false;
- uint8_t* resp = (((uint8_t *)BigBuf) + 3560); // was 3560 - tied to other size changes
-
- // Reset trace buffer
- memset(trace, 0x44, RECV_CMD_OFFSET);
- traceLen = 0;
-
- // Setup SSC
- FpgaSetupSsc();
- // Start from off (no field generated)
- // Signal field is off with the appropriate LED
- LED_D_OFF();
- FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
- SpinDelay(200);
-
- SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
-
- // Now give it time to spin up.
- // Signal field is on with the appropriate LED
- FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_MOD);
- SpinDelay(200);
-
- LED_A_ON();
-
- for(int i=0;i<1;i++) {
-
- if(traceLen > TRACE_SIZE) {
- DbpString("Trace full");
- break;
- }
-
- if (BUTTON_PRESS()) break;
-
- // Send act_all
- ReaderTransmitIClass(act_all, 1);
- // Card present?
- if(ReaderReceiveIClass(resp)) {
- ReaderTransmitIClass(identify, 1);
- if(ReaderReceiveIClass(resp) == 10) {
- // Select card
- memcpy(&select[1],resp,8);
- ReaderTransmitIClass(select, sizeof(select));
-
- if(ReaderReceiveIClass(resp) == 10) {
- Dbprintf(" Selected CSN: %02x %02x %02x %02x %02x %02x %02x %02x",
- resp[0], resp[1], resp[2],
- resp[3], resp[4], resp[5],
- resp[6], resp[7]);
- }
- memcpy(card_data,resp,8);
- // Card selected
- Dbprintf("Readcheck on Sector 2");
- ReaderTransmitIClass(readcheck_cc, sizeof(readcheck_cc));
- if(ReaderReceiveIClass(resp) == 8) {
- Dbprintf(" CC: %02x %02x %02x %02x %02x %02x %02x %02x",
- resp[0], resp[1], resp[2],
- resp[3], resp[4], resp[5],
- resp[6], resp[7]);
+ //Fill up the buffer
+ memcpy(card_data+stored_data_length,resp,8);
+ stored_data_length += 8;
+
+ if(stored_data_length +8 > USB_CMD_DATA_SIZE)
+ {//Time to send this off and start afresh
+ cmd_send(CMD_ACK,
+ stored_data_length,//data length
+ failedRead,//Failed blocks?
+ 0,//Not used ATM
+ card_data, stored_data_length);
+ //reset
+ stored_data_length = 0;
+ failedRead = 0;