THIS REQUIRES A BOOTROM UPDATE!! To save FPGA area, split the LF and HF bitstreams...

[proxmark3-svn] / armsrc / hitag2.c

diff --git a/armsrc/hitag2.c b/armsrc/hitag2.c
index 37c2e3eb41aa17188a7fdb606a39a34cb28824df..9181a62ea1b9b2722f6348cff98d6bbe13e53c3e 100644 (file)
--- a/armsrc/hitag2.c
+++ b/armsrc/hitag2.c
@@ -29,10 +29,6 @@ bool bAuthenticating;
 bool bPwd;
 bool bSuccessful;
 
-size_t nbytes(size_t nbits) {
-       return (nbits/8)+((nbits%8)>0);
-}
-
 int LogTraceHitag(const uint8_t * btBytes, int iBits, int iSamples, uint32_t dwParity, int bReader)
 {
   // Return when trace is full
@@ -677,12 +673,19 @@ bool hitag2_test_auth_attempts(byte_t* rx, const size_t rxlen, byte_t* tx, size_
                case 0: {
                        // Stop if there is no answer while we are in crypto mode (after sending NrAr)
                        if (bCrypto) {
-                               Dbprintf("auth: %02x%02x%02x%02x%02x%02x%02x%02x Failed!",NrAr[0],NrAr[1],NrAr[2],NrAr[3],NrAr[4],NrAr[5],NrAr[6],NrAr[7]);
+                               Dbprintf("auth: %02x%02x%02x%02x%02x%02x%02x%02x Failed, removed entry!",NrAr[0],NrAr[1],NrAr[2],NrAr[3],NrAr[4],NrAr[5],NrAr[6],NrAr[7]);
+
+        // Removing failed entry from authentiations table
+        memcpy(auth_table+auth_table_pos,auth_table+auth_table_pos+8,8);
+        auth_table_len -= 8;
+
+        // Return if we reached the end of the authentiactions table
                                bCrypto = false;
-                               if ((auth_table_pos+8) == auth_table_len) {
+                               if (auth_table_pos == auth_table_len) {
                                        return false;
                                }
-                               auth_table_pos += 8;
+        
+        // Copy the next authentication attempt in row (at the same position, b/c we removed last failed entry)
                                memcpy(NrAr,auth_table+auth_table_pos,8);
                        }
                        *txlen = 5;
@@ -740,6 +743,7 @@ void SnoopHitag(uint32_t type) {
        
        // Set up eavesdropping mode, frequency divisor which will drive the FPGA
        // and analog mux selection.
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT);
        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
        SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
@@ -963,6 +967,7 @@ void SimulateHitagTag(bool tag_mem_supplied, byte_t* data) {
        
        // Set up simulator mode, frequency divisor which will drive the FPGA
        // and analog mux selection.
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT);
        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
        SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
@@ -1121,6 +1126,7 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) {
        bool bStop;
        bool bQuitTraceFull = false;
   
+  FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
   // Reset the return status
   bSuccessful = false;