]> git.zerfleddert.de Git - proxmark3-svn/blobdiff - armsrc/appmain.c
use read instead of readcheck except to auth
[proxmark3-svn] / armsrc / appmain.c
index 3c92a7fd28c07b50b1bd76929bb9ba1aff45f245..994bfa6c2ac5c22abea07cf267cb539d28d491eb 100644 (file)
 
 #include "legicrf.h"
 #include <hitag2.h>
 
 #include "legicrf.h"
 #include <hitag2.h>
-
+#include "lfsampling.h"
+#include "BigBuf.h"
 #ifdef WITH_LCD
  #include "LCD.h"
 #endif
 
 #ifdef WITH_LCD
  #include "LCD.h"
 #endif
 
+// Craig Young - 14a stand-alone code
+#ifdef WITH_ISO14443a_StandAlone
+ #include "iso14443a.h"
+#endif
+
 #define abs(x) ( ((x)<0) ? -(x) : (x) )
 
 //=============================================================================
 #define abs(x) ( ((x)<0) ? -(x) : (x) )
 
 //=============================================================================
@@ -42,12 +48,6 @@ int ToSendMax;
 static int ToSendBit;
 struct common_area common_area __attribute__((section(".commonarea")));
 
 static int ToSendBit;
 struct common_area common_area __attribute__((section(".commonarea")));
 
-void BufferClear(void)
-{
-       memset(BigBuf,0,sizeof(BigBuf));
-       Dbprintf("Buffer cleared (%i bytes)",sizeof(BigBuf));
-}
-
 void ToSendReset(void)
 {
        ToSendMax = -1;
 void ToSendReset(void)
 {
        ToSendMax = -1;
@@ -141,12 +141,25 @@ static int ReadAdc(int ch)
 
        AT91C_BASE_ADC->ADC_CR = AT91C_ADC_SWRST;
        AT91C_BASE_ADC->ADC_MR =
 
        AT91C_BASE_ADC->ADC_CR = AT91C_ADC_SWRST;
        AT91C_BASE_ADC->ADC_MR =
-               ADC_MODE_PRESCALE(32) |
-               ADC_MODE_STARTUP_TIME(16) |
-               ADC_MODE_SAMPLE_HOLD_TIME(8);
+               ADC_MODE_PRESCALE(63  /* was 32 */) |                                                   // ADC_CLK = MCK / ((63+1) * 2) = 48MHz / 128 = 375kHz
+               ADC_MODE_STARTUP_TIME(1  /* was 16 */) |                                                // Startup Time = (1+1) * 8 / ADC_CLK = 16 / 375kHz = 42,7us     Note: must be > 20us
+               ADC_MODE_SAMPLE_HOLD_TIME(15  /* was 8 */);                                     // Sample & Hold Time SHTIM = 15 / ADC_CLK = 15 / 375kHz = 40us
+
+       // Note: ADC_MODE_PRESCALE and ADC_MODE_SAMPLE_HOLD_TIME are set to the maximum allowed value. 
+       // Both AMPL_LO and AMPL_HI are very high impedance (10MOhm) outputs, the input capacitance of the ADC is 12pF (typical). This results in a time constant
+       // of RC = 10MOhm * 12pF = 120us. Even after the maximum configurable sample&hold time of 40us the input capacitor will not be fully charged. 
+       // 
+       // The maths are:
+       // If there is a voltage v_in at the input, the voltage v_cap at the capacitor (this is what we are measuring) will be
+       //
+       //       v_cap = v_in * (1 - exp(-RC/SHTIM))  =   v_in * (1 - exp(-3))  =  v_in * 0,95                   (i.e. an error of 5%)
+       // 
+       // Note: with the "historic" values in the comments above, the error was 34%  !!!
+       
        AT91C_BASE_ADC->ADC_CHER = ADC_CHANNEL(ch);
 
        AT91C_BASE_ADC->ADC_CR = AT91C_ADC_START;
        AT91C_BASE_ADC->ADC_CHER = ADC_CHANNEL(ch);
 
        AT91C_BASE_ADC->ADC_CR = AT91C_ADC_START;
+
        while(!(AT91C_BASE_ADC->ADC_SR & ADC_END_OF_CONVERSION(ch)))
                ;
        d = AT91C_BASE_ADC->ADC_CDR[ch];
        while(!(AT91C_BASE_ADC->ADC_SR & ADC_END_OF_CONVERSION(ch)))
                ;
        d = AT91C_BASE_ADC->ADC_CDR[ch];
@@ -189,9 +202,7 @@ void MeasureAntennaTuning(void)
     WDT_HIT();
                FpgaSendCommand(FPGA_CMD_SET_DIVISOR, i);
                SpinDelay(20);
     WDT_HIT();
                FpgaSendCommand(FPGA_CMD_SET_DIVISOR, i);
                SpinDelay(20);
-               // Vref = 3.3V, and a 10000:240 voltage divider on the input
-               // can measure voltages up to 137500 mV
-               adcval = ((137500 * AvgAdc(ADC_CHAN_LF)) >> 10);
+               adcval = ((MAX_ADC_LF_VOLTAGE * AvgAdc(ADC_CHAN_LF)) >> 10);
                if (i==95)      vLf125 = adcval; // voltage at 125Khz
                if (i==89)      vLf134 = adcval; // voltage at 134Khz
 
                if (i==95)      vLf125 = adcval; // voltage at 125Khz
                if (i==89)      vLf134 = adcval; // voltage at 134Khz
 
@@ -211,11 +222,9 @@ void MeasureAntennaTuning(void)
        FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
        SpinDelay(20);
        FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
        SpinDelay(20);
-       // Vref = 3300mV, and an 10:1 voltage divider on the input
-       // can measure voltages up to 33000 mV
-       vHf = (33000 * AvgAdc(ADC_CHAN_HF)) >> 10;
+       vHf = (MAX_ADC_HF_VOLTAGE * AvgAdc(ADC_CHAN_HF)) >> 10;
 
 
-       cmd_send(CMD_MEASURED_ANTENNA_TUNING,vLf125|(vLf134<<16),vHf,peakf|(peakv<<16),LF_Results,256);
+       cmd_send(CMD_MEASURED_ANTENNA_TUNING, vLf125 | (vLf134<<16), vHf, peakf | (peakv<<16), LF_Results, 256);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
        LED_A_OFF();
        LED_B_OFF();
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
        LED_A_OFF();
        LED_B_OFF();
@@ -228,68 +237,24 @@ void MeasureAntennaTuningHf(void)
 
        DbpString("Measuring HF antenna, press button to exit");
 
 
        DbpString("Measuring HF antenna, press button to exit");
 
+       // Let the FPGA drive the high-frequency antenna around 13.56 MHz.
+       FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
+
        for (;;) {
        for (;;) {
-               // Let the FPGA drive the high-frequency antenna around 13.56 MHz.
-               FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
-               FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
                SpinDelay(20);
                SpinDelay(20);
-               // Vref = 3300mV, and an 10:1 voltage divider on the input
-               // can measure voltages up to 33000 mV
-               vHf = (33000 * AvgAdc(ADC_CHAN_HF)) >> 10;
+               vHf = (MAX_ADC_HF_VOLTAGE * AvgAdc(ADC_CHAN_HF)) >> 10;
 
                Dbprintf("%d mV",vHf);
                if (BUTTON_PRESS()) break;
        }
        DbpString("cancelled");
 
                Dbprintf("%d mV",vHf);
                if (BUTTON_PRESS()) break;
        }
        DbpString("cancelled");
-}
-
-
-void SimulateTagHfListen(void)
-{
-       uint8_t *dest = (uint8_t *)BigBuf+FREE_BUFFER_OFFSET;
-       uint8_t v = 0;
-       int i;
-       int p = 0;
-
-       // We're using this mode just so that I can test it out; the simulated
-       // tag mode would work just as well and be simpler.
-       FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
-       FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ | FPGA_HF_READER_RX_XCORR_SNOOP);
-
-       // We need to listen to the high-frequency, peak-detected path.
-       SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
-
-       FpgaSetupSsc();
-
-       i = 0;
-       for(;;) {
-               if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
-                       AT91C_BASE_SSC->SSC_THR = 0xff;
-               }
-               if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
-                       uint8_t r = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
-
-                       v <<= 1;
-                       if(r & 1) {
-                               v |= 1;
-                       }
-                       p++;
 
 
-                       if(p >= 8) {
-                               dest[i] = v;
-                               v = 0;
-                               p = 0;
-                               i++;
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
 
 
-                               if(i >= FREE_BUFFER_SIZE) {
-                                       break;
-                               }
-                       }
-               }
-       }
-       DbpString("simulate tag (now type bitsamples)");
 }
 
 }
 
+
 void ReadMem(int addr)
 {
        const uint8_t *data = ((uint8_t *)addr);
 void ReadMem(int addr)
 {
        const uint8_t *data = ((uint8_t *)addr);
@@ -301,11 +266,11 @@ void ReadMem(int addr)
 /* osimage version information is linked in */
 extern struct version_information version_information;
 /* bootrom version information is pointed to from _bootphase1_version_pointer */
 /* osimage version information is linked in */
 extern struct version_information version_information;
 /* bootrom version information is pointed to from _bootphase1_version_pointer */
-extern char *_bootphase1_version_pointer, _flash_start, _flash_end;
+extern char *_bootphase1_version_pointer, _flash_start, _flash_end, _bootrom_start, _bootrom_end, __data_src_start__;
 void SendVersion(void)
 {
 void SendVersion(void)
 {
-       char temp[512]; /* Limited data payload in USB packets */
-       DbpString("Prox/RFID mark3 RFID instrument");
+       char temp[USB_CMD_DATA_SIZE]; /* Limited data payload in USB packets */
+       char VersionString[USB_CMD_DATA_SIZE] = { '\0' };
 
        /* Try to find the bootrom version information. Expect to find a pointer at
         * symbol _bootphase1_version_pointer, perform slight sanity checks on the
 
        /* Try to find the bootrom version information. Expect to find a pointer at
         * symbol _bootphase1_version_pointer, perform slight sanity checks on the
@@ -313,33 +278,33 @@ void SendVersion(void)
         */
        char *bootrom_version = *(char**)&_bootphase1_version_pointer;
        if( bootrom_version < &_flash_start || bootrom_version >= &_flash_end ) {
         */
        char *bootrom_version = *(char**)&_bootphase1_version_pointer;
        if( bootrom_version < &_flash_start || bootrom_version >= &_flash_end ) {
-               DbpString("bootrom version information appears invalid");
+               strcat(VersionString, "bootrom version information appears invalid\n");
        } else {
                FormatVersionInformation(temp, sizeof(temp), "bootrom: ", bootrom_version);
        } else {
                FormatVersionInformation(temp, sizeof(temp), "bootrom: ", bootrom_version);
-               DbpString(temp);
+               strncat(VersionString, temp, sizeof(VersionString) - strlen(VersionString) - 1);
        }
 
        FormatVersionInformation(temp, sizeof(temp), "os: ", &version_information);
        }
 
        FormatVersionInformation(temp, sizeof(temp), "os: ", &version_information);
-       DbpString(temp);
+       strncat(VersionString, temp, sizeof(VersionString) - strlen(VersionString) - 1);
 
 
-       FpgaGatherVersion(temp, sizeof(temp));
-       DbpString(temp);
-       // Send Chip ID
-       cmd_send(CMD_ACK,*(AT91C_DBGU_CIDR),0,0,NULL,0);
+       FpgaGatherVersion(FPGA_BITSTREAM_LF, temp, sizeof(temp));
+       strncat(VersionString, temp, sizeof(VersionString) - strlen(VersionString) - 1);
+       FpgaGatherVersion(FPGA_BITSTREAM_HF, temp, sizeof(temp));
+       strncat(VersionString, temp, sizeof(VersionString) - strlen(VersionString) - 1);
+
+       // Send Chip ID and used flash memory
+       uint32_t text_and_rodata_section_size = (uint32_t)&__data_src_start__ - (uint32_t)&_flash_start;
+       uint32_t compressed_data_section_size = common_area.arg1;
+       cmd_send(CMD_ACK, *(AT91C_DBGU_CIDR), text_and_rodata_section_size + compressed_data_section_size, 0, VersionString, strlen(VersionString));
 }
 
 }
 
-#ifdef WITH_LF
-// samy's sniff and repeat routine
-void SamyRun()
-{
-       DbpString("Stand-alone mode! No PC necessary.");
-       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+#if defined(WITH_ISO14443a_StandAlone) || defined(WITH_LF)
 
 
-       // 3 possible options? no just 2 for now
 #define OPTS 2
 
 #define OPTS 2
 
-       int high[OPTS], low[OPTS];
-
+void StandAloneMode()
+{
+       DbpString("Stand-alone mode! No PC necessary.");
        // Oooh pretty -- notify user we're in elite samy mode now
        LED(LED_RED,    200);
        LED(LED_ORANGE, 200);
        // Oooh pretty -- notify user we're in elite samy mode now
        LED(LED_RED,    200);
        LED(LED_ORANGE, 200);
@@ -351,6 +316,216 @@ void SamyRun()
        LED(LED_ORANGE, 200);
        LED(LED_RED,    200);
 
        LED(LED_ORANGE, 200);
        LED(LED_RED,    200);
 
+}
+
+#endif
+
+
+
+#ifdef WITH_ISO14443a_StandAlone
+void StandAloneMode14a()
+{
+       StandAloneMode();
+       FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
+
+       int selected = 0;
+       int playing = 0;
+       int cardRead[OPTS] = {0};
+       uint8_t readUID[10] = {0};
+       uint32_t uid_1st[OPTS]={0};
+       uint32_t uid_2nd[OPTS]={0};
+
+       LED(selected + 1, 0);
+
+       for (;;)
+       {
+               usb_poll();
+               WDT_HIT();
+
+               // Was our button held down or pressed?
+               int button_pressed = BUTTON_HELD(1000);
+               SpinDelay(300);
+
+               // Button was held for a second, begin recording
+               if (button_pressed > 0 && cardRead[selected] == 0)
+               {
+                       LEDsoff();
+                       LED(selected + 1, 0);
+                       LED(LED_RED2, 0);
+
+                       // record
+                       Dbprintf("Enabling iso14443a reader mode for [Bank: %u]...", selected);
+
+                       // wait for button to be released
+                       while(BUTTON_PRESS())
+                               WDT_HIT();
+                       /* need this delay to prevent catching some weird data */
+                       SpinDelay(500);
+                       /* Code for reading from 14a tag */
+                       uint8_t uid[10]  ={0};
+                       uint32_t cuid;
+                       iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD);
+
+                       for ( ; ; )
+                       {
+                               WDT_HIT();
+                               if (!iso14443a_select_card(uid, NULL, &cuid))
+                                       continue;
+                               else
+                               {
+                                       Dbprintf("Read UID:"); Dbhexdump(10,uid,0);
+                                       memcpy(readUID,uid,10*sizeof(uint8_t));
+                                       uint8_t *dst = (uint8_t *)&uid_1st[selected];
+                                       // Set UID byte order
+                                       for (int i=0; i<4; i++)
+                                               dst[i] = uid[3-i];
+                                       dst = (uint8_t *)&uid_2nd[selected];
+                                       for (int i=0; i<4; i++)
+                                               dst[i] = uid[7-i];
+                                       break;
+                               }
+                       }
+                       LEDsoff();
+                       LED(LED_GREEN,  200);
+                       LED(LED_ORANGE, 200);
+                       LED(LED_GREEN,  200);
+                       LED(LED_ORANGE, 200);
+
+                       LEDsoff();
+                       LED(selected + 1, 0);
+                       // Finished recording
+
+                       // If we were previously playing, set playing off
+                       // so next button push begins playing what we recorded
+                       playing = 0;
+
+                       cardRead[selected] = 1;
+
+               }
+               /* MF UID clone */
+               else if (button_pressed > 0 && cardRead[selected] == 1)
+               {
+                                       LEDsoff();
+                                       LED(selected + 1, 0);
+                                       LED(LED_ORANGE, 250);
+
+
+                                       // record
+                                       Dbprintf("Preparing to Clone card [Bank: %x]; uid: %08x", selected, uid_1st[selected]);
+
+                                       // wait for button to be released
+                                       while(BUTTON_PRESS())
+                                       {
+                                               // Delay cloning until card is in place
+                                               WDT_HIT();
+                                       }
+                                       Dbprintf("Starting clone. [Bank: %u]", selected);
+                                       // need this delay to prevent catching some weird data
+                                       SpinDelay(500);
+                                       // Begin clone function here:
+                                       /* Example from client/mifarehost.c for commanding a block write for "magic Chinese" cards:
+                                                       UsbCommand c = {CMD_MIFARE_CSETBLOCK, {wantWipe, params & (0xFE | (uid == NULL ? 0:1)), blockNo}};
+                                                       memcpy(c.d.asBytes, data, 16);
+                                                       SendCommand(&c);
+
+                                               Block read is similar:
+                                                       UsbCommand c = {CMD_MIFARE_CGETBLOCK, {params, 0, blockNo}};
+                                               We need to imitate that call with blockNo 0 to set a uid.
+
+                                               The get and set commands are handled in this file:
+                                                       // Work with "magic Chinese" card
+                                                       case CMD_MIFARE_CSETBLOCK:
+                                                                       MifareCSetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+                                                                       break;
+                                                       case CMD_MIFARE_CGETBLOCK:
+                                                                       MifareCGetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+                                                                                                       //
+                                                                       break;
+
+                                               mfCSetUID provides example logic for UID set workflow:
+                                                       -Read block0 from card in field with MifareCGetBlock()
+                                                       -Configure new values without replacing reserved bytes
+                                                                       memcpy(block0, uid, 4); // Copy UID bytes from byte array
+                                                                       // Mifare UID BCC
+                                                                       block0[4] = block0[0]^block0[1]^block0[2]^block0[3]; // BCC on byte 5
+                                                                       Bytes 5-7 are reserved SAK and ATQA for mifare classic
+                                                       -Use mfCSetBlock(0, block0, oldUID, wantWipe, CSETBLOCK_SINGLE_OPER) to write it
+                                       */
+                                       uint8_t oldBlock0[16] = {0}, newBlock0[16] = {0}, testBlock0[16] = {0};
+                                       // arg0 = Flags == CSETBLOCK_SINGLE_OPER=0x1F, arg1=returnSlot, arg2=blockNo
+                                       MifareCGetBlock(0x1F, 1, 0, oldBlock0);
+                                       Dbprintf("UID from target tag: %02X%02X%02X%02X", oldBlock0[0],oldBlock0[1],oldBlock0[2],oldBlock0[3]);
+                                       memcpy(newBlock0,oldBlock0,16);
+                                       // Copy uid_1st for bank (2nd is for longer UIDs not supported if classic)
+
+                                       newBlock0[0] = uid_1st[selected]>>24;
+                                       newBlock0[1] = 0xFF & (uid_1st[selected]>>16);
+                                       newBlock0[2] = 0xFF & (uid_1st[selected]>>8);
+                                       newBlock0[3] = 0xFF & (uid_1st[selected]);
+                                       newBlock0[4] = newBlock0[0]^newBlock0[1]^newBlock0[2]^newBlock0[3];
+                                       // arg0 = needWipe, arg1 = workFlags, arg2 = blockNo, datain
+                                       MifareCSetBlock(0, 0xFF,0, newBlock0);
+                                       MifareCGetBlock(0x1F, 1, 0, testBlock0);
+                                       if (memcmp(testBlock0,newBlock0,16)==0)
+                                       {
+                                               DbpString("Cloned successfull!");
+                                               cardRead[selected] = 0; // Only if the card was cloned successfully should we clear it
+                                       }
+                                       LEDsoff();
+                                       LED(selected + 1, 0);
+                                       // Finished recording
+
+                                       // If we were previously playing, set playing off
+                                       // so next button push begins playing what we recorded
+                                       playing = 0;
+
+               }
+               // Change where to record (or begin playing)
+               else if (button_pressed && cardRead[selected])
+               {
+                       // Next option if we were previously playing
+                       if (playing)
+                               selected = (selected + 1) % OPTS;
+                       playing = !playing;
+
+                       LEDsoff();
+                       LED(selected + 1, 0);
+
+                       // Begin transmitting
+                       if (playing)
+                       {
+                               LED(LED_GREEN, 0);
+                               DbpString("Playing");
+                               while (!BUTTON_HELD(500)) { // Loop simulating tag until the button is held a half-sec
+                                               Dbprintf("Simulating ISO14443a tag with uid[0]: %08x, uid[1]: %08x [Bank: %u]", uid_1st[selected],uid_2nd[selected],selected);
+                                               SimulateIso14443aTag(1,uid_1st[selected],uid_2nd[selected],NULL);
+                                       }
+                               //cardRead[selected] = 1;
+                               Dbprintf("Done playing [Bank: %u]",selected);
+
+                               /* We pressed a button so ignore it here with a delay */
+                               SpinDelay(300);
+
+                               // when done, we're done playing, move to next option
+                               selected = (selected + 1) % OPTS;
+                               playing = !playing;
+                               LEDsoff();
+                               LED(selected + 1, 0);
+                       }
+                       else
+                               while(BUTTON_PRESS())
+                                       WDT_HIT();
+               }
+       }
+}
+#elif WITH_LF
+// samy's sniff and repeat routine
+void SamyRun()
+{
+       StandAloneMode();
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+
+       int high[OPTS], low[OPTS];
        int selected = 0;
        int playing = 0;
        int cardRead = 0;
        int selected = 0;
        int playing = 0;
        int cardRead = 0;
@@ -361,7 +536,7 @@ void SamyRun()
        for (;;)
        {
                usb_poll();
        for (;;)
        {
                usb_poll();
-    WDT_HIT();
+               WDT_HIT();
 
                // Was our button held down or pressed?
                int button_pressed = BUTTON_HELD(1000);
 
                // Was our button held down or pressed?
                int button_pressed = BUTTON_HELD(1000);
@@ -474,8 +649,8 @@ void SamyRun()
                }
        }
 }
                }
        }
 }
-#endif
 
 
+#endif
 /*
 OBJECTIVE
 Listen and detect an external reader. Determine the best location
 /*
 OBJECTIVE
 Listen and detect an external reader. Determine the best location
@@ -515,26 +690,32 @@ static const int LIGHT_LEN = sizeof(LIGHT_SCHEME)/sizeof(LIGHT_SCHEME[0]);
 
 void ListenReaderField(int limit)
 {
 
 void ListenReaderField(int limit)
 {
-       int lf_av, lf_av_new, lf_baseline= 0, lf_count= 0, lf_max;
-       int hf_av, hf_av_new,  hf_baseline= 0, hf_count= 0, hf_max;
+       int lf_av, lf_av_new, lf_baseline= 0, lf_max;
+       int hf_av, hf_av_new,  hf_baseline= 0, hf_max;
        int mode=1, display_val, display_max, i;
 
        int mode=1, display_val, display_max, i;
 
-#define LF_ONLY                1
-#define HF_ONLY                2
+#define LF_ONLY                                                1
+#define HF_ONLY                                                2
+#define REPORT_CHANGE                          10    // report new values only if they have changed at least by REPORT_CHANGE
+
+
+       // switch off FPGA - we don't want to measure our own signal
+       FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
 
        LEDsoff();
 
 
        LEDsoff();
 
-       lf_av=lf_max=ReadAdc(ADC_CHAN_LF);
+       lf_av = lf_max = AvgAdc(ADC_CHAN_LF);
 
        if(limit != HF_ONLY) {
 
        if(limit != HF_ONLY) {
-               Dbprintf("LF 125/134 Baseline: %d", lf_av);
+               Dbprintf("LF 125/134kHz Baseline: %dmV", (MAX_ADC_LF_VOLTAGE * lf_av) >> 10);
                lf_baseline = lf_av;
        }
 
                lf_baseline = lf_av;
        }
 
-       hf_av=hf_max=ReadAdc(ADC_CHAN_HF);
+       hf_av = hf_max = AvgAdc(ADC_CHAN_HF);
 
        if (limit != LF_ONLY) {
 
        if (limit != LF_ONLY) {
-               Dbprintf("HF 13.56 Baseline: %d", hf_av);
+               Dbprintf("HF 13.56MHz Baseline: %dmV", (MAX_ADC_HF_VOLTAGE * hf_av) >> 10);
                hf_baseline = hf_av;
        }
 
                hf_baseline = hf_av;
        }
 
@@ -557,38 +738,38 @@ void ListenReaderField(int limit)
                WDT_HIT();
 
                if (limit != HF_ONLY) {
                WDT_HIT();
 
                if (limit != HF_ONLY) {
-                       if(mode==1) {
-                               if (abs(lf_av - lf_baseline) > 10) LED_D_ON();
-                               else                               LED_D_OFF();
+                       if(mode == 1) {
+                               if (abs(lf_av - lf_baseline) > REPORT_CHANGE) 
+                                       LED_D_ON();
+                               else
+                                       LED_D_OFF();
                        }
 
                        }
 
-                       ++lf_count;
-                       lf_av_new= ReadAdc(ADC_CHAN_LF);
+                       lf_av_new = AvgAdc(ADC_CHAN_LF);
                        // see if there's a significant change
                        // see if there's a significant change
-                       if(abs(lf_av - lf_av_new) > 10) {
-                               Dbprintf("LF 125/134 Field Change: %x %x %x", lf_av, lf_av_new, lf_count);
+                       if(abs(lf_av - lf_av_new) > REPORT_CHANGE) {
+                               Dbprintf("LF 125/134kHz Field Change: %5dmV", (MAX_ADC_LF_VOLTAGE * lf_av_new) >> 10);
                                lf_av = lf_av_new;
                                if (lf_av > lf_max)
                                        lf_max = lf_av;
                                lf_av = lf_av_new;
                                if (lf_av > lf_max)
                                        lf_max = lf_av;
-                               lf_count= 0;
                        }
                }
 
                if (limit != LF_ONLY) {
                        if (mode == 1){
                        }
                }
 
                if (limit != LF_ONLY) {
                        if (mode == 1){
-                               if (abs(hf_av - hf_baseline) > 10) LED_B_ON();
-                               else                               LED_B_OFF();
+                               if (abs(hf_av - hf_baseline) > REPORT_CHANGE)   
+                                       LED_B_ON();
+                               else
+                                       LED_B_OFF();
                        }
 
                        }
 
-                       ++hf_count;
-                       hf_av_new= ReadAdc(ADC_CHAN_HF);
+                       hf_av_new = AvgAdc(ADC_CHAN_HF);
                        // see if there's a significant change
                        // see if there's a significant change
-                       if(abs(hf_av - hf_av_new) > 10) {
-                               Dbprintf("HF 13.56 Field Change: %x %x %x", hf_av, hf_av_new, hf_count);
+                       if(abs(hf_av - hf_av_new) > REPORT_CHANGE) {
+                               Dbprintf("HF 13.56MHz Field Change: %5dmV", (MAX_ADC_HF_VOLTAGE * hf_av_new) >> 10);
                                hf_av = hf_av_new;
                                if (hf_av > hf_max)
                                        hf_max = hf_av;
                                hf_av = hf_av_new;
                                if (hf_av > hf_max)
                                        hf_max = hf_av;
-                               hf_count= 0;
                        }
                }
 
                        }
                }
 
@@ -629,16 +810,17 @@ void UsbPacketReceived(uint8_t *packet, int len)
   
        switch(c->cmd) {
 #ifdef WITH_LF
   
        switch(c->cmd) {
 #ifdef WITH_LF
+               case CMD_SET_LF_SAMPLING_CONFIG:
+                       setSamplingConfig((sample_config *) c->d.asBytes);
+                       break;
                case CMD_ACQUIRE_RAW_ADC_SAMPLES_125K:
                case CMD_ACQUIRE_RAW_ADC_SAMPLES_125K:
-                       AcquireRawAdcSamples125k(c->arg[0]);
-                       cmd_send(CMD_ACK,0,0,0,0,0);
+                       cmd_send(CMD_ACK,SampleLF(c->arg[0]),0,0,0,0);
                        break;
                case CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K:
                        ModThenAcquireRawAdcSamples125k(c->arg[0],c->arg[1],c->arg[2],c->d.asBytes);
                        break;
                case CMD_LF_SNOOP_RAW_ADC_SAMPLES:
                        break;
                case CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K:
                        ModThenAcquireRawAdcSamples125k(c->arg[0],c->arg[1],c->arg[2],c->d.asBytes);
                        break;
                case CMD_LF_SNOOP_RAW_ADC_SAMPLES:
-                       SnoopLFRawAdcSamples(c->arg[0], c->arg[1]);
-                       cmd_send(CMD_ACK,0,0,0,0,0);
+                       cmd_send(CMD_ACK,SnoopLF(),0,0,0,0);
                        break;
                case CMD_HID_DEMOD_FSK:
                        CmdHIDdemodFSK(c->arg[0], 0, 0, 1);
                        break;
                case CMD_HID_DEMOD_FSK:
                        CmdHIDdemodFSK(c->arg[0], 0, 0, 1);
@@ -646,6 +828,15 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_HID_SIM_TAG:
                        CmdHIDsimTAG(c->arg[0], c->arg[1], 1);
                        break;
                case CMD_HID_SIM_TAG:
                        CmdHIDsimTAG(c->arg[0], c->arg[1], 1);
                        break;
+               case CMD_FSK_SIM_TAG:
+                       CmdFSKsimTAG(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+                       break;
+               case CMD_ASK_SIM_TAG:
+                       CmdASKsimTag(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+                       break;
+               case CMD_PSK_SIM_TAG:
+                       CmdPSKsimTag(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+                       break;
                case CMD_HID_CLONE_TAG:
                        CopyHIDtoT55x7(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0]);
                        break;
                case CMD_HID_CLONE_TAG:
                        CopyHIDtoT55x7(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0]);
                        break;
@@ -686,6 +877,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
                        break;
                case CMD_T55XX_WRITE_BLOCK:
                        T55xxWriteBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0]);
                        break;
                case CMD_T55XX_WRITE_BLOCK:
                        T55xxWriteBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0]);
+                       cmd_send(CMD_ACK,0,0,0,0,0);
                        break;
                case CMD_T55XX_READ_TRACE:
                        T55xxReadTrace();
                        break;
                case CMD_T55XX_READ_TRACE:
                        T55xxReadTrace();
@@ -700,6 +892,9 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_EM4X_WRITE_WORD:
                        EM4xWriteWord(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0]);
                        break;
                case CMD_EM4X_WRITE_WORD:
                        EM4xWriteWord(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0]);
                        break;
+               case CMD_AWID_DEMOD_FSK: // Set realtime AWID demodulation
+                       CmdAWIDdemodFSK(c->arg[0], 0, 0, 1);
+                        break;
 #endif
 
 #ifdef WITH_HITAG
 #endif
 
 #ifdef WITH_HITAG
@@ -713,7 +908,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
                        ReaderHitag((hitag_function)c->arg[0],(hitag_data*)c->d.asBytes);
                        break;
 #endif
                        ReaderHitag((hitag_function)c->arg[0],(hitag_data*)c->d.asBytes);
                        break;
 #endif
-            
+
 #ifdef WITH_ISO15693
                case CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693:
                        AcquireRawAdcSamplesIso15693();
 #ifdef WITH_ISO15693
                case CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693:
                        AcquireRawAdcSamplesIso15693();
@@ -757,20 +952,17 @@ void UsbPacketReceived(uint8_t *packet, int len)
 #endif
 
 #ifdef WITH_ISO14443b
 #endif
 
 #ifdef WITH_ISO14443b
-               case CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443:
-                       AcquireRawAdcSamplesIso14443(c->arg[0]);
-                       break;
                case CMD_READ_SRI512_TAG:
                case CMD_READ_SRI512_TAG:
-                       ReadSTMemoryIso14443(0x0F);
+                       ReadSTMemoryIso14443b(0x0F);
                        break;
                case CMD_READ_SRIX4K_TAG:
                        break;
                case CMD_READ_SRIX4K_TAG:
-                       ReadSTMemoryIso14443(0x7F);
+                       ReadSTMemoryIso14443b(0x7F);
                        break;
                        break;
-               case CMD_SNOOP_ISO_14443:
-                       SnoopIso14443();
+               case CMD_SNOOP_ISO_14443B:
+                       SnoopIso14443b();
                        break;
                        break;
-               case CMD_SIMULATE_TAG_ISO_14443:
-                       SimulateIso14443Tag();
+               case CMD_SIMULATE_TAG_ISO_14443B:
+                       SimulateIso14443bTag();
                        break;
                case CMD_ISO_14443B_COMMAND:
                        SendRawCommand14443B(c->arg[0],c->arg[1],c->arg[2],c->d.asBytes);
                        break;
                case CMD_ISO_14443B_COMMAND:
                        SendRawCommand14443B(c->arg[0],c->arg[1],c->arg[2],c->d.asBytes);
@@ -791,31 +983,40 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_EPA_PACE_COLLECT_NONCE:
                        EPA_PACE_Collect_Nonce(c);
                        break;
                case CMD_EPA_PACE_COLLECT_NONCE:
                        EPA_PACE_Collect_Nonce(c);
                        break;
+               case CMD_EPA_PACE_REPLAY:
+                       EPA_PACE_Replay(c);
+                       break;
                        
                case CMD_READER_MIFARE:
                        
                case CMD_READER_MIFARE:
-            ReaderMifare(c->arg[0]);
+                       ReaderMifare(c->arg[0]);
                        break;
                case CMD_MIFARE_READBL:
                        MifareReadBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
                case CMD_MIFAREU_READBL:
                        break;
                case CMD_MIFARE_READBL:
                        MifareReadBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
                case CMD_MIFAREU_READBL:
-                       MifareUReadBlock(c->arg[0],c->d.asBytes);
+                       MifareUReadBlock(c->arg[0],c->arg[1], c->d.asBytes);
+                       break;
+               case CMD_MIFAREUC_AUTH:
+                       MifareUC_Auth(c->arg[0],c->d.asBytes);
                        break;
                case CMD_MIFAREU_READCARD:
                        break;
                case CMD_MIFAREU_READCARD:
-                       MifareUReadCard(c->arg[0],c->d.asBytes);
-                        break;
+                       MifareUReadCard(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+                       break;
+               case CMD_MIFAREUC_SETPWD: 
+                       MifareUSetPwd(c->arg[0], c->d.asBytes);
+                       break;
                case CMD_MIFARE_READSC:
                        MifareReadSector(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
                case CMD_MIFARE_WRITEBL:
                        MifareWriteBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
                case CMD_MIFARE_READSC:
                        MifareReadSector(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
                case CMD_MIFARE_WRITEBL:
                        MifareWriteBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
-               case CMD_MIFAREU_WRITEBL_COMPAT:
-                       MifareUWriteBlock(c->arg[0], c->d.asBytes);
-                        break;
+               //case CMD_MIFAREU_WRITEBL_COMPAT:
+                       //MifareUWriteBlockCompat(c->arg[0], c->d.asBytes);
+                       //break;
                case CMD_MIFAREU_WRITEBL:
                case CMD_MIFAREU_WRITEBL:
-                        MifareUWriteBlock_Special(c->arg[0], c->d.asBytes);
-                        break;
+                       MifareUWriteBlock(c->arg[0], c->arg[1], c->d.asBytes);
+                       break;
                case CMD_MIFARE_NESTED:
                        MifareNested(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
                case CMD_MIFARE_NESTED:
                        MifareNested(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
@@ -858,6 +1059,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_MIFARE_SNIFFER:
                        SniffMifare(c->arg[0]);
                        break;
                case CMD_MIFARE_SNIFFER:
                        SniffMifare(c->arg[0]);
                        break;
+
 #endif
 
 #ifdef WITH_ICLASS
 #endif
 
 #ifdef WITH_ICLASS
@@ -872,16 +1074,33 @@ void UsbPacketReceived(uint8_t *packet, int len)
                        ReaderIClass(c->arg[0]);
                        break;
                case CMD_READER_ICLASS_REPLAY:
                        ReaderIClass(c->arg[0]);
                        break;
                case CMD_READER_ICLASS_REPLAY:
-                   ReaderIClass_Replay(c->arg[0], c->d.asBytes);
+                       ReaderIClass_Replay(c->arg[0], c->d.asBytes);
                        break;
                        break;
-#endif
-
-               case CMD_SIMULATE_TAG_HF_LISTEN:
-                       SimulateTagHfListen();
+               case CMD_ICLASS_EML_MEMSET:
+                       emlSet(c->d.asBytes,c->arg[0], c->arg[1]);
+                       break;
+               case CMD_ICLASS_WRITEBLOCK:
+                       iClass_WriteBlock(c->arg[0], c->d.asBytes);
+                       break;
+               case CMD_ICLASS_READCHECK:  // auth step 1
+                       iClass_ReadCheck(c->arg[0], c->arg[1]);
                        break;
                        break;
+               case CMD_ICLASS_READBLOCK:
+                       iClass_ReadBlk(c->arg[0]);
+                       break;
+               case CMD_ICLASS_AUTHENTICATION: //check
+                       iClass_Authentication(c->d.asBytes);
+                       break;
+               case CMD_ICLASS_DUMP:
+                       iClass_Dump(c->arg[0], c->arg[1]);
+                       break;
+               case CMD_ICLASS_CLONE:
+                       iClass_Clone(c->arg[0], c->arg[1], c->d.asBytes);
+                       break;
+#endif
 
                case CMD_BUFF_CLEAR:
 
                case CMD_BUFF_CLEAR:
-                       BufferClear();
+                       BigBuf_Clear();
                        break;
 
                case CMD_MEASURE_ANTENNA_TUNING:
                        break;
 
                case CMD_MEASURE_ANTENNA_TUNING:
@@ -905,17 +1124,18 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K:
 
                        LED_B_ON();
                case CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K:
 
                        LED_B_ON();
+                       uint8_t *BigBuf = BigBuf_get_addr();
                        for(size_t i=0; i<c->arg[1]; i += USB_CMD_DATA_SIZE) {
                                size_t len = MIN((c->arg[1] - i),USB_CMD_DATA_SIZE);
                        for(size_t i=0; i<c->arg[1]; i += USB_CMD_DATA_SIZE) {
                                size_t len = MIN((c->arg[1] - i),USB_CMD_DATA_SIZE);
-                               cmd_send(CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K,i,len,0,((byte_t*)BigBuf)+c->arg[0]+i,len);
+                               cmd_send(CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K,i,len,BigBuf_get_traceLen(),BigBuf+c->arg[0]+i,len);
                        }
                        // Trigger a finish downloading signal with an ACK frame
                        }
                        // Trigger a finish downloading signal with an ACK frame
-                       cmd_send(CMD_ACK,0,0,0,0,0);
+                       cmd_send(CMD_ACK,1,0,BigBuf_get_traceLen(),getSamplingConfig(),sizeof(sample_config));
                        LED_B_OFF();
                        break;
 
                case CMD_DOWNLOADED_SIM_SAMPLES_125K: {
                        LED_B_OFF();
                        break;
 
                case CMD_DOWNLOADED_SIM_SAMPLES_125K: {
-                       uint8_t *b = (uint8_t *)BigBuf;
+                       uint8_t *b = BigBuf_get_addr();
                        memcpy(b+c->arg[0], c->d.asBytes, USB_CMD_DATA_SIZE);
                        cmd_send(CMD_ACK,0,0,0,0,0);
                        break;
                        memcpy(b+c->arg[0], c->d.asBytes, USB_CMD_DATA_SIZE);
                        cmd_send(CMD_ACK,0,0,0,0,0);
                        break;
@@ -986,7 +1206,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
 void  __attribute__((noreturn)) AppMain(void)
 {
        SpinDelay(100);
 void  __attribute__((noreturn)) AppMain(void)
 {
        SpinDelay(100);
-
+       clear_trace();
        if(common_area.magic != COMMON_AREA_MAGIC || common_area.version != 1) {
                /* Initialize common area */
                memset(&common_area, 0, sizeof(common_area));
        if(common_area.magic != COMMON_AREA_MAGIC || common_area.version != 1) {
                /* Initialize common area */
                memset(&common_area, 0, sizeof(common_area));
@@ -1040,8 +1260,16 @@ void  __attribute__((noreturn)) AppMain(void)
                WDT_HIT();
 
 #ifdef WITH_LF
                WDT_HIT();
 
 #ifdef WITH_LF
+#ifndef WITH_ISO14443a_StandAlone
                if (BUTTON_HELD(1000) > 0)
                        SamyRun();
                if (BUTTON_HELD(1000) > 0)
                        SamyRun();
+#endif
+#endif
+#ifdef WITH_ISO14443a
+#ifdef WITH_ISO14443a_StandAlone
+               if (BUTTON_HELD(1000) > 0)
+                       StandAloneMode14a();
+#endif
 #endif
        }
 }
 #endif
        }
 }
Impressum, Datenschutz