]> git.zerfleddert.de Git - proxmark3-svn/blobdiff - armsrc/hitag2.c
Merge pull request #221 from jamchamb/clean-mfu-dump
[proxmark3-svn] / armsrc / hitag2.c
index da77cc8a0b49136df06ebbe80602be224778d0b8..6a072bf4f93c230ef5a650a32eef2f5965a2ab30 100644 (file)
 #include "util.h"
 #include "hitag2.h"
 #include "string.h"
+#include "BigBuf.h"
 
 static bool bQuiet;
 
-bool bCrypto;
-bool bAuthenticating;
-bool bPwd;
-bool bSuccessful;
+static bool bCrypto;
+static bool bAuthenticating;
+static bool bPwd;
+static bool bSuccessful;
+
 
-int LogTraceHitag(const uint8_t * btBytes, int iBits, int iSamples, uint32_t dwParity, int bReader)
-{
-  // Return when trace is full
-  if (traceLen >= TRACE_SIZE) return FALSE;
-  
-  // Trace the random, i'm curious
-  rsamples += iSamples;
-  trace[traceLen++] = ((rsamples >> 0) & 0xff);
-  trace[traceLen++] = ((rsamples >> 8) & 0xff);
-  trace[traceLen++] = ((rsamples >> 16) & 0xff);
-  trace[traceLen++] = ((rsamples >> 24) & 0xff);
-  if (!bReader) {
-    trace[traceLen - 1] |= 0x80;
-  }
-  trace[traceLen++] = ((dwParity >> 0) & 0xff);
-  trace[traceLen++] = ((dwParity >> 8) & 0xff);
-  trace[traceLen++] = ((dwParity >> 16) & 0xff);
-  trace[traceLen++] = ((dwParity >> 24) & 0xff);
-  trace[traceLen++] = iBits;
-  memcpy(trace + traceLen, btBytes, nbytes(iBits));
-  traceLen += nbytes(iBits);
-  return TRUE;
-}
 
 struct hitag2_tag {
        uint32_t uid;
@@ -85,21 +64,17 @@ static struct hitag2_tag tag = {
     },
 };
 
-//#define TRACE_LENGTH 3000
-//uint8_t *trace = (uint8_t *) BigBuf;
-//int traceLen = 0;
-//int rsamples = 0;
+// ToDo: define a meaningful maximum size for auth_table. The bigger this is, the lower will be the available memory for traces. 
+// Historically it used to be FREE_BUFFER_SIZE, which was 2744.
+#define AUTH_TABLE_LENGTH 2744
+static byte_t* auth_table;
+static size_t auth_table_pos = 0;
+static size_t auth_table_len = AUTH_TABLE_LENGTH;
 
-#define AUTH_TABLE_OFFSET FREE_BUFFER_OFFSET
-#define AUTH_TABLE_LENGTH FREE_BUFFER_SIZE
-byte_t* auth_table = (byte_t *)BigBuf+AUTH_TABLE_OFFSET;
-size_t auth_table_pos = 0;
-size_t auth_table_len = AUTH_TABLE_LENGTH;
-
-byte_t password[4];
-byte_t NrAr[8];
-byte_t key[8];
-uint64_t cipher_state;
+static byte_t password[4];
+static byte_t NrAr[8];
+static byte_t key[8];
+static uint64_t cipher_state;
 
 /* Following is a modified version of cryptolib.com/ciphers/hitag2/ */
 // Software optimized 48-bit Philips/NXP Mifare Hitag2 PCF7936/46/47/52 stream cipher algorithm by I.C. Wiener 2006-2007.
@@ -177,14 +152,14 @@ static u32 _hitag2_byte (u64 * x)
        return c;
 }
 
-int hitag2_reset(void)
+static int hitag2_reset(void)
 {
        tag.state = TAG_STATE_RESET;
        tag.crypto_active = 0;
        return 0;
 }
 
-int hitag2_init(void)
+static int hitag2_init(void)
 {
 //     memcpy(&tag, &resetdata, sizeof(tag));
        hitag2_reset();
@@ -300,7 +275,8 @@ static void hitag_send_frame(const byte_t* frame, size_t frame_len)
        LOW(GPIO_SSC_DOUT);
 }
 
-void hitag2_handle_reader_command(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen)
+
+static void hitag2_handle_reader_command(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen)
 {
        byte_t rx_air[HITAG_FRAME_LEN];
        
@@ -364,7 +340,7 @@ void hitag2_handle_reader_command(byte_t* rx, const size_t rxlen, byte_t* tx, si
                                
                                // Unknown command
                                default:
-                                       Dbprintf("Uknown command: %02x %02x",rx[0],rx[1]);
+                                       Dbprintf("Unknown command: %02x %02x",rx[0],rx[1]);
                                        return;
                                break;
                        }
@@ -435,7 +411,7 @@ static void hitag_reader_send_bit(int bit) {
        // Binary puls length modulation (BPLM) is used to encode the data stream
        // This means that a transmission of a one takes longer than that of a zero
        
-       // Enable modulation, which means, drop the the field
+       // Enable modulation, which means, drop the field
        HIGH(GPIO_SSC_DOUT);
        
        // Wait for 4-10 times the carrier period
@@ -457,6 +433,7 @@ static void hitag_reader_send_bit(int bit) {
        LED_A_OFF();
 }
 
+
 static void hitag_reader_send_frame(const byte_t* frame, size_t frame_len)
 {
        // Send the content of the frame
@@ -465,7 +442,7 @@ static void hitag_reader_send_frame(const byte_t* frame, size_t frame_len)
        }
        // Send EOF 
        AT91C_BASE_TC0->TC_CCR = AT91C_TC_SWTRG;
-       // Enable modulation, which means, drop the the field
+       // Enable modulation, which means, drop the field
        HIGH(GPIO_SSC_DOUT);
        // Wait for 4-10 times the carrier period
        while(AT91C_BASE_TC0->TC_CV < T0*6);
@@ -475,7 +452,7 @@ static void hitag_reader_send_frame(const byte_t* frame, size_t frame_len)
 
 size_t blocknr;
 
-bool hitag2_password(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
+static bool hitag2_password(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
        // Reset the transmission frame length
        *txlen = 0;
        
@@ -530,7 +507,7 @@ bool hitag2_password(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen)
        return true;
 }
 
-bool hitag2_crypto(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
+static bool hitag2_crypto(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
        // Reset the transmission frame length
        *txlen = 0;
        
@@ -623,7 +600,7 @@ bool hitag2_crypto(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
 }
 
 
-bool hitag2_authenticate(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
+static bool hitag2_authenticate(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
        // Reset the transmission frame length 
        *txlen = 0;
        
@@ -663,7 +640,9 @@ bool hitag2_authenticate(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txl
        return true;
 }
 
-bool hitag2_test_auth_attempts(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
+
+static bool hitag2_test_auth_attempts(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
+
        // Reset the transmission frame length 
        *txlen = 0;
        
@@ -675,17 +654,17 @@ bool hitag2_test_auth_attempts(byte_t* rx, const size_t rxlen, byte_t* tx, size_
                        if (bCrypto) {
                                Dbprintf("auth: %02x%02x%02x%02x%02x%02x%02x%02x Failed, removed entry!",NrAr[0],NrAr[1],NrAr[2],NrAr[3],NrAr[4],NrAr[5],NrAr[6],NrAr[7]);
 
-        // Removing failed entry from authentiations table
-        memcpy(auth_table+auth_table_pos,auth_table+auth_table_pos+8,8);
-        auth_table_len -= 8;
+                               // Removing failed entry from authentiations table
+                               memcpy(auth_table+auth_table_pos,auth_table+auth_table_pos+8,8);
+                               auth_table_len -= 8;
 
-        // Return if we reached the end of the authentiactions table
+                               // Return if we reached the end of the authentications table
                                bCrypto = false;
                                if (auth_table_pos == auth_table_len) {
                                        return false;
                                }
-        
-        // Copy the next authentication attempt in row (at the same position, b/c we removed last failed entry)
+
+                               // Copy the next authentication attempt in row (at the same position, b/c we removed last failed entry)
                                memcpy(NrAr,auth_table+auth_table_pos,8);
                        }
                        *txlen = 5;
@@ -718,6 +697,43 @@ bool hitag2_test_auth_attempts(byte_t* rx, const size_t rxlen, byte_t* tx, size_
        return true;
 }
 
+static bool hitag2_read_uid(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
+       // Reset the transmission frame length
+       *txlen = 0;
+
+       // Try to find out which command was send by selecting on length (in bits)
+       switch (rxlen) {
+               // No answer, try to resurrect
+               case 0: {
+                       // Just starting or if there is no answer
+                       *txlen = 5;
+                       memcpy(tx,"\xc0",nbytes(*txlen));
+               } break;
+               // Received UID
+               case 32: {
+                       // Check if we received answer tag (at)
+                       if (bAuthenticating) {
+                               bAuthenticating = false;
+                       } else {
+                               // Store the received block
+                               memcpy(tag.sectors[blocknr],rx,4);
+                               blocknr++;
+                       }
+                       if (blocknr > 0) {
+                               //DbpString("Read successful!");
+                               bSuccessful = true;
+                               return false;
+                       }
+               } break;
+               // Unexpected response
+               default: {
+                       Dbprintf("Uknown frame length: %d",rxlen);
+                       return false;
+               } break;
+       }
+       return true;
+}
+
 void SnoopHitag(uint32_t type) {
        int frame_count;
        int response;
@@ -730,20 +746,24 @@ void SnoopHitag(uint32_t type) {
        byte_t rx[HITAG_FRAME_LEN];
        size_t rxlen=0;
        
-       // Clean up trace and prepare it for storing frames
-       iso14a_set_tracing(TRUE);
-       iso14a_clear_trace();
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
 
+       // Clean up trace and prepare it for storing frames
+       set_tracing(TRUE);
+       clear_trace();
+       
        auth_table_len = 0;
        auth_table_pos = 0;
+
+       BigBuf_free();
+    auth_table = (byte_t *)BigBuf_malloc(AUTH_TABLE_LENGTH);
        memset(auth_table, 0x00, AUTH_TABLE_LENGTH);
-       
+
        DbpString("Starting Hitag2 snoop");
        LED_D_ON();
        
        // Set up eavesdropping mode, frequency divisor which will drive the FPGA
        // and analog mux selection.
-       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT  | FPGA_LF_EDGE_DETECT_TOGGLE_MODE);
        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
        SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
@@ -760,7 +780,7 @@ void SnoopHitag(uint32_t type) {
        AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC1);
        AT91C_BASE_PIOA->PIO_BSR = GPIO_SSC_FRAME;
        
-  // Disable timer during configuration        
+       // Disable timer during configuration   
        AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;
        
        // Capture mode, defaul timer source = MCK/2 (TIMER_CLOCK1), TIOA is external trigger,
@@ -940,11 +960,17 @@ void SimulateHitagTag(bool tag_mem_supplied, byte_t* data) {
        bool bQuitTraceFull = false;
        bQuiet = false;
        
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+
        // Clean up trace and prepare it for storing frames
-  iso14a_set_tracing(TRUE);
-  iso14a_clear_trace();
+       set_tracing(TRUE);
+       clear_trace();
+
        auth_table_len = 0;
        auth_table_pos = 0;
+    byte_t* auth_table;
+       BigBuf_free();
+    auth_table = (byte_t *)BigBuf_malloc(AUTH_TABLE_LENGTH);
        memset(auth_table, 0x00, AUTH_TABLE_LENGTH);
 
        DbpString("Starting Hitag2 simulation");
@@ -967,7 +993,6 @@ void SimulateHitagTag(bool tag_mem_supplied, byte_t* data) {
        
        // Set up simulator mode, frequency divisor which will drive the FPGA
        // and analog mux selection.
-       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT | FPGA_LF_EDGE_DETECT_READER_FIELD);
        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
        SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
@@ -1126,56 +1151,60 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) {
        bool bStop;
        bool bQuitTraceFull = false;
   
-  FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
-  // Reset the return status
-  bSuccessful = false;
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+       // Reset the return status
+       bSuccessful = false;
   
        // Clean up trace and prepare it for storing frames
-  iso14a_set_tracing(TRUE);
-  iso14a_clear_trace();
-       DbpString("Starting Hitag reader family");
+       set_tracing(TRUE);
+       clear_trace();
+
+       //DbpString("Starting Hitag reader family");
 
        // Check configuration
        switch(htf) {
                case RHT2F_PASSWORD: {
-      Dbprintf("List identifier in password mode");
+                       Dbprintf("List identifier in password mode");
                        memcpy(password,htd->pwd.password,4);
-               blocknr = 0;
+                       blocknr = 0;
                        bQuitTraceFull = false;
                        bQuiet = false;
                        bPwd = false;
                } break;
-      
                case RHT2F_AUTHENTICATE: {
                        DbpString("Authenticating using nr,ar pair:");
                        memcpy(NrAr,htd->auth.NrAr,8);
                        Dbhexdump(8,NrAr,false);
                        bQuiet = false;
                        bCrypto = false;
-      bAuthenticating = false;
+                       bAuthenticating = false;
                        bQuitTraceFull = true;
                } break;
-      
                case RHT2F_CRYPTO: {
                        DbpString("Authenticating using key:");
-                       memcpy(key,htd->crypto.key,4);    //HACK; 4 or 6??  I read both in the code.
+                       memcpy(key,htd->crypto.key,6);    //HACK; 4 or 6??  I read both in the code.
                        Dbhexdump(6,key,false);
-      blocknr = 0;
+                       blocknr = 0;
                        bQuiet = false;
                        bCrypto = false;
-      bAuthenticating = false;
+                       bAuthenticating = false;
                        bQuitTraceFull = true;
                } break;
-
                case RHT2F_TEST_AUTH_ATTEMPTS: {
                        Dbprintf("Testing %d authentication attempts",(auth_table_len/8));
                        auth_table_pos = 0;
-                       memcpy(NrAr,auth_table,8);
+                       memcpy(NrAr, auth_table, 8);
                        bQuitTraceFull = false;
                        bQuiet = false;
                        bCrypto = false;
                } break;
-                       
+               case RHT2F_UID_ONLY: {
+                       blocknr = 0;
+                       bQuiet = false;
+                       bCrypto = false;
+                       bAuthenticating = false;
+                       bQuitTraceFull = true;
+               } break;
                default: {
                        Dbprintf("Error, unknown function: %d",htf);
                        return;
@@ -1232,22 +1261,22 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) {
     // hitagS settings
     reset_sof = 1;
     t_wait = 200;
-    DbpString("Configured for hitagS reader");
+    //DbpString("Configured for hitagS reader");
   } else if (htf < 20) {
     // hitag1 settings
     reset_sof = 1;
     t_wait = 200;
-    DbpString("Configured for hitag1 reader");
+    //DbpString("Configured for hitag1 reader");
   } else if (htf < 30) {
     // hitag2 settings
     reset_sof = 4;
     t_wait = HITAG_T_WAIT_2;
-    DbpString("Configured for hitag2 reader");
+    //DbpString("Configured for hitag2 reader");
        } else {
     Dbprintf("Error, unknown hitag reader type: %d",htf);
     return;
   }
-               
+       uint8_t attempt_count=0;
        while(!bStop && !BUTTON_PRESS()) {
                // Watchdog hit
                WDT_HIT();
@@ -1282,6 +1311,11 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) {
                        case RHT2F_TEST_AUTH_ATTEMPTS: {
                                bStop = !hitag2_test_auth_attempts(rx,rxlen,tx,&txlen);
                        } break;
+                       case RHT2F_UID_ONLY: {
+                               bStop = !hitag2_read_uid(rx, rxlen, tx, &txlen);
+                               attempt_count++; //attempt 3 times to get uid then quit
+                               if (!bStop && attempt_count == 3) bStop = true;
+                       } break;
                        default: {
                                Dbprintf("Error, unknown function: %d",htf);
                                return;
@@ -1298,6 +1332,8 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) {
                // we need to wait (T_Wait2 + half_tag_period) when the last was a 'one'.
                // All timer values are in terms of T0 units
                while(AT91C_BASE_TC0->TC_CV < T0*(t_wait+(HITAG_T_TAG_HALF_PERIOD*lastbit)));
+                       
+                       //Dbprintf("DEBUG: Sending reader frame");
                
                // Transmit the reader frame
                hitag_reader_send_frame(tx,txlen);
@@ -1327,7 +1363,9 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) {
                bSkip = true;
                tag_sof = reset_sof;
                response = 0;
-               
+                       //Dbprintf("DEBUG: Waiting to receive frame");
+               uint32_t errorCount = 0;
+
                // Receive frame, watch for at most T0*EOF periods
                while (AT91C_BASE_TC1->TC_CV < T0*HITAG_T_WAIT_MAX) {
                        // Check if falling edge in tag modulation is detected
@@ -1343,19 +1381,29 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) {
                                // Capture tag frame (manchester decoding using only falling edges)
                                if(ra >= HITAG_T_EOF) {
                                        if (rxlen != 0) {
-                                               //DbpString("wierd1?");
+                                               //Dbprintf("DEBUG: Wierd1");
                                        }
                                        // Capture the T0 periods that have passed since last communication or field drop (reset)
                                        // We always recieve a 'one' first, which has the falling edge after a half period |-_|
                                        response = ra-HITAG_T_TAG_HALF_PERIOD;
                                } else if(ra >= HITAG_T_TAG_CAPTURE_FOUR_HALF) {
                                        // Manchester coding example |-_|_-|-_| (101)
+
+                                       //need to test to verify we don't exceed memory...
+                                       //if ( ((rxlen+2) / 8) > HITAG_FRAME_LEN) {
+                                       //      break;
+                                       //}
                                        rx[rxlen / 8] |= 0 << (7-(rxlen%8));
                                        rxlen++;
                                        rx[rxlen / 8] |= 1 << (7-(rxlen%8));
                                        rxlen++;
                                } else if(ra >= HITAG_T_TAG_CAPTURE_THREE_HALF) {
                                        // Manchester coding example |_-|...|_-|-_| (0...01)
+                                       
+                                       //need to test to verify we don't exceed memory...
+                                       //if ( ((rxlen+2) / 8) > HITAG_FRAME_LEN) {
+                                       //      break;
+                                       //}
                                        rx[rxlen / 8] |= 0 << (7-(rxlen%8));
                                        rxlen++;
                                        // We have to skip this half period at start and add the 'one' the second time 
@@ -1367,6 +1415,11 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) {
                                        bSkip = !bSkip;
                                } else if(ra >= HITAG_T_TAG_CAPTURE_TWO_HALF) {
                                        // Manchester coding example |_-|_-| (00) or |-_|-_| (11)
+
+                                       //need to test to verify we don't exceed memory...
+                                       //if ( ((rxlen+2) / 8) > HITAG_FRAME_LEN) {
+                                       //      break;
+                                       //}
                                        if (tag_sof) {
                                                // Ignore bits that are transmitted during SOF
                                                tag_sof--;
@@ -1376,22 +1429,27 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) {
                                                rxlen++;
                                        }
                                } else {
+                                               //Dbprintf("DEBUG: Wierd2");
+                                               errorCount++;
                                        // Ignore wierd value, is to small to mean anything
                                }
                        }
-
+                       //if we saw over 100 wierd values break it probably isn't hitag...
+                       if (errorCount >100) break;
                        // We can break this loop if we received the last bit from a frame
                        if (AT91C_BASE_TC1->TC_CV > T0*HITAG_T_EOF) {
                                if (rxlen>0) break;
                        }
                }
        }
+       //Dbprintf("DEBUG: Done waiting for frame");
+       
        LED_B_OFF();
        LED_D_OFF();
        AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;
        AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS;
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-       Dbprintf("frame received: %d",frame_count);
-  DbpString("All done");
-  cmd_send(CMD_ACK,bSuccessful,0,0,(byte_t*)tag.sectors,48);
+       //Dbprintf("frame received: %d",frame_count);
+       //DbpString("All done");
+       cmd_send(CMD_ACK,bSuccessful,0,0,(byte_t*)tag.sectors,48);
 }
Impressum, Datenschutz