]> git.zerfleddert.de Git - proxmark3-svn/blobdiff - armsrc/iso14443a.c
small updates to hf mf restore1k
[proxmark3-svn] / armsrc / iso14443a.c
index b64a1942a033a2d6a46afa8b1efe0e45b5ce66e2..6c219f301cbd8f130ca1ca214cb959b6137e8d32 100644 (file)
@@ -26,11 +26,11 @@ static int rsamples = 0;
 static int tracing = TRUE;
 static uint32_t iso14a_timeout;
 
-// CARD TO READER
+// CARD TO READER - manchester
 // Sequence D: 11110000 modulation with subcarrier during first half
 // Sequence E: 00001111 modulation with subcarrier during second half
 // Sequence F: 00000000 no modulation with subcarrier
-// READER TO CARD
+// READER TO CARD - miller
 // Sequence X: 00001100 drop after half a period
 // Sequence Y: 00000000 no drop
 // Sequence Z: 11000000 drop at start
@@ -60,18 +60,18 @@ static const uint8_t OddByteParity[256] = {
   1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1
 };
 
-// BIG CHANGE - UNDERSTAND THIS BEFORE WE COMMIT
-#define RECV_CMD_OFFSET   3032
-#define RECV_RES_OFFSET   3096
-#define DMA_BUFFER_OFFSET 3160
-#define DMA_BUFFER_SIZE   4096
-#define TRACE_LENGTH      3000
-
 uint8_t trigger = 0;
 void iso14a_set_trigger(int enable) {
        trigger = enable;
 }
 
+void iso14a_clear_tracelen(void) {
+       traceLen = 0;
+}
+void iso14a_set_tracing(int enable) {
+       tracing = enable;
+}
+
 //-----------------------------------------------------------------------------
 // Generate the parity value for a byte sequence
 //
@@ -784,12 +784,11 @@ done:
 //-----------------------------------------------------------------------------
 // Prepare tag messages
 //-----------------------------------------------------------------------------
-static void CodeIso14443aAsTag(const uint8_t *cmd, int len)
+static void CodeIso14443aAsTagPar(const uint8_t *cmd, int len, uint32_t dwParity)
 {
-    int i;
-       int oddparity;
+       int i;
 
-    ToSendReset();
+       ToSendReset();
 
        // Correction bit, might be removed when not needed
        ToSendStuffBit(0);
@@ -800,55 +799,47 @@ static void CodeIso14443aAsTag(const uint8_t *cmd, int len)
        ToSendStuffBit(0);
        ToSendStuffBit(0);
        ToSendStuffBit(0);
-
+       
        // Send startbit
        ToSend[++ToSendMax] = SEC_D;
 
-    for(i = 0; i < len; i++) {
-        int j;
-        uint8_t b = cmd[i];
+       for(i = 0; i < len; i++) {
+               int j;
+               uint8_t b = cmd[i];
 
                // Data bits
-        oddparity = 0x01;
                for(j = 0; j < 8; j++) {
-            oddparity ^= (b & 1);
                        if(b & 1) {
                                ToSend[++ToSendMax] = SEC_D;
                        } else {
                                ToSend[++ToSendMax] = SEC_E;
-            }
-            b >>= 1;
-        }
+                       }
+                       b >>= 1;
+               }
 
-        // Parity bit
-        if(oddparity) {
-               ToSend[++ToSendMax] = SEC_D;
+               // Get the parity bit
+               if ((dwParity >> i) & 0x01) {
+                       ToSend[++ToSendMax] = SEC_D;
                } else {
                        ToSend[++ToSendMax] = SEC_E;
                }
-    }
-
-    // Send stopbit
-    ToSend[++ToSendMax] = SEC_F;
-
-       // Flush the buffer in FPGA!!
-       for(i = 0; i < 5; i++) {
-               ToSend[++ToSendMax] = SEC_F;
        }
 
-    // Convert from last byte pos to length
-    ToSendMax++;
+       // Send stopbit
+       ToSend[++ToSendMax] = SEC_F;
 
-    // Add a few more for slop
-    ToSend[ToSendMax++] = 0x00;
-       ToSend[ToSendMax++] = 0x00;
-    //ToSendMax += 2;
+       // Convert from last byte pos to length
+       ToSendMax++;
+}
+
+static void CodeIso14443aAsTag(const uint8_t *cmd, int len){
+       CodeIso14443aAsTagPar(cmd, len, GetParity(cmd, len));
 }
 
 //-----------------------------------------------------------------------------
 // This is to send a NACK kind of answer, its only 3 bits, I know it should be 4
 //-----------------------------------------------------------------------------
-static void CodeStrangeAnswer()
+static void CodeStrangeAnswerAsTag()
 {
        int i;
 
@@ -886,11 +877,47 @@ static void CodeStrangeAnswer()
 
     // Convert from last byte pos to length
     ToSendMax++;
+}
+
+static void Code4bitAnswerAsTag(uint8_t cmd)
+{
+       int i;
+
+    ToSendReset();
+
+       // Correction bit, might be removed when not needed
+       ToSendStuffBit(0);
+       ToSendStuffBit(0);
+       ToSendStuffBit(0);
+       ToSendStuffBit(0);
+       ToSendStuffBit(1);  // 1
+       ToSendStuffBit(0);
+       ToSendStuffBit(0);
+       ToSendStuffBit(0);
+
+       // Send startbit
+       ToSend[++ToSendMax] = SEC_D;
+
+       uint8_t b = cmd;
+       for(i = 0; i < 4; i++) {
+               if(b & 1) {
+                       ToSend[++ToSendMax] = SEC_D;
+               } else {
+                       ToSend[++ToSendMax] = SEC_E;
+               }
+               b >>= 1;
+       }
+
+       // Send stopbit
+       ToSend[++ToSendMax] = SEC_F;
+
+       // Flush the buffer in FPGA!!
+       for(i = 0; i < 5; i++) {
+               ToSend[++ToSendMax] = SEC_F;
+       }
 
-    // Add a few more for slop
-    ToSend[ToSendMax++] = 0x00;
-       ToSend[ToSendMax++] = 0x00;
-    //ToSendMax += 2;
+    // Convert from last byte pos to length
+    ToSendMax++;
 }
 
 //-----------------------------------------------------------------------------
@@ -932,6 +959,7 @@ static int GetIso14443aCommandFromReader(uint8_t *received, int *len, int maxLen
         }
     }
 }
+static int EmSendCmd14443aRaw(uint8_t *resp, int respLen, int correctionNeeded);
 
 //-----------------------------------------------------------------------------
 // Main loop of simulated tag: receive commands from reader, decide what
@@ -1062,7 +1090,7 @@ ComputeCrc14443(CRC_14443_A, response3a, 1, &response3a[1], &response3a[2]);
     memcpy(resp3a, ToSend, ToSendMax); resp3aLen = ToSendMax;
 
        // Strange answer is an example of rare message size (3 bits)
-       CodeStrangeAnswer();
+       CodeStrangeAnswerAsTag();
        memcpy(resp4, ToSend, ToSendMax); resp4Len = ToSendMax;
 
        // Authentication answer (random nonce)
@@ -1180,8 +1208,13 @@ ComputeCrc14443(CRC_14443_A, response3a, 1, &response3a[1], &response3a[2]);
                }
 
         if(respLen <= 0) continue;
+               //----------------------------
+               u = 0;
+               b = 0x00;
+               fdt_indicator = FALSE;
 
-        // Modulate Manchester
+               EmSendCmd14443aRaw(resp, respLen, receivedCmd[0] == 0x52);
+/*        // Modulate Manchester
                FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_TAGSIM_MOD);
         AT91C_BASE_SSC->SSC_THR = 0x00;
         FpgaSetupSsc();
@@ -1213,7 +1246,7 @@ ComputeCrc14443(CRC_14443_A, response3a, 1, &response3a[1], &response3a[2]);
                            break;
                        }
         }
-
+*/
     }
 
        Dbprintf("%x %x %x", happened, happened2, cmdsRecvd);
@@ -1398,6 +1431,156 @@ void CodeIso14443aAsReaderPar(const uint8_t * cmd, int len, uint32_t dwParity)
   ToSendMax++;
 }
 
+//-----------------------------------------------------------------------------
+// Wait for commands from reader
+// Stop when button is pressed (return 1) or field was gone (return 2)
+// Or return 0 when command is captured
+//-----------------------------------------------------------------------------
+static int EmGetCmd(uint8_t *received, int *len, int maxLen)
+{
+       *len = 0;
+
+       uint32_t timer = 0, vtime = 0;
+       int analogCnt = 0;
+       int analogAVG = 0;
+
+       // Set FPGA mode to "simulated ISO 14443 tag", no modulation (listen
+       // only, since we are receiving, not transmitting).
+       // Signal field is off with the appropriate LED
+       LED_D_OFF();
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_TAGSIM_LISTEN);
+
+       // Set ADC to read field strength
+       AT91C_BASE_ADC->ADC_CR = AT91C_ADC_SWRST;
+       AT91C_BASE_ADC->ADC_MR =
+                               ADC_MODE_PRESCALE(32) |
+                               ADC_MODE_STARTUP_TIME(16) |
+                               ADC_MODE_SAMPLE_HOLD_TIME(8);
+       AT91C_BASE_ADC->ADC_CHER = ADC_CHANNEL(ADC_CHAN_HF);
+       // start ADC
+       AT91C_BASE_ADC->ADC_CR = AT91C_ADC_START;
+       
+       // Now run a 'software UART' on the stream of incoming samples.
+       Uart.output = received;
+       Uart.byteCntMax = maxLen;
+       Uart.state = STATE_UNSYNCD;
+
+       for(;;) {
+               WDT_HIT();
+
+               if (BUTTON_PRESS()) return 1;
+
+               // test if the field exists
+               if (AT91C_BASE_ADC->ADC_SR & ADC_END_OF_CONVERSION(ADC_CHAN_HF)) {
+                       analogCnt++;
+                       analogAVG += AT91C_BASE_ADC->ADC_CDR[ADC_CHAN_HF];
+                       AT91C_BASE_ADC->ADC_CR = AT91C_ADC_START;
+                       if (analogCnt >= 32) {
+                               if ((33000 * (analogAVG / analogCnt) >> 10) < MF_MINFIELDV) {
+                                       vtime = GetTickCount();
+                                       if (!timer) timer = vtime;
+                                       // 50ms no field --> card to idle state
+                                       if (vtime - timer > 50) return 2;
+                               } else
+                                       if (timer) timer = 0;
+                               analogCnt = 0;
+                               analogAVG = 0;
+                       }
+               }
+               // transmit none
+               if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
+                       AT91C_BASE_SSC->SSC_THR = 0x00;
+               }
+               // receive and test the miller decoding
+               if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
+                       volatile uint8_t b = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
+                       if(MillerDecoding((b & 0xf0) >> 4)) {
+                               *len = Uart.byteCnt;
+                               if (tracing) LogTrace(received, *len, GetDeltaCountUS(), Uart.parityBits, TRUE);
+                               return 0;
+                       }
+                       if(MillerDecoding(b & 0x0f)) {
+                               *len = Uart.byteCnt;
+                               if (tracing) LogTrace(received, *len, GetDeltaCountUS(), Uart.parityBits, TRUE);
+                               return 0;
+                       }
+               }
+       }
+}
+
+static int EmSendCmd14443aRaw(uint8_t *resp, int respLen, int correctionNeeded)
+{
+       int i, u = 0;
+       uint8_t b = 0;
+
+       // Modulate Manchester
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_TAGSIM_MOD);
+       AT91C_BASE_SSC->SSC_THR = 0x00;
+       FpgaSetupSsc();
+       
+       // include correction bit
+       i = 1;
+       if((Uart.parityBits & 0x01) || correctionNeeded) {
+               // 1236, so correction bit needed
+               i = 0;
+       }
+       
+       // send cycle
+       for(;;) {
+               if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
+                       volatile uint8_t b = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
+                       (void)b;
+               }
+               if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
+                       if(i > respLen) {
+                               b = 0xff; // was 0x00
+                               u++;
+                       } else {
+                               b = resp[i];
+                               i++;
+                       }
+                       AT91C_BASE_SSC->SSC_THR = b;
+
+                       if(u > 4) break;
+               }
+               if(BUTTON_PRESS()) {
+                       break;
+               }
+       }
+
+       return 0;
+}
+
+int EmSend4bitEx(uint8_t resp, int correctionNeeded){
+  Code4bitAnswerAsTag(resp);
+       int res = EmSendCmd14443aRaw(ToSend, ToSendMax, correctionNeeded);
+  if (tracing) LogTrace(&resp, 1, GetDeltaCountUS(), GetParity(&resp, 1), FALSE);
+       return res;
+}
+
+int EmSend4bit(uint8_t resp){
+       return EmSend4bitEx(resp, 0);
+}
+
+int EmSendCmdExPar(uint8_t *resp, int respLen, int correctionNeeded, uint32_t par){
+  CodeIso14443aAsTagPar(resp, respLen, par);
+       int res = EmSendCmd14443aRaw(ToSend, ToSendMax, correctionNeeded);
+  if (tracing) LogTrace(resp, respLen, GetDeltaCountUS(), par, FALSE);
+       return res;
+}
+
+int EmSendCmdEx(uint8_t *resp, int respLen, int correctionNeeded){
+       return EmSendCmdExPar(resp, respLen, correctionNeeded, GetParity(resp, respLen));
+}
+
+int EmSendCmd(uint8_t *resp, int respLen){
+       return EmSendCmdExPar(resp, respLen, 0, GetParity(resp, respLen));
+}
+
+int EmSendCmdPar(uint8_t *resp, int respLen, uint32_t par){
+       return EmSendCmdExPar(resp, respLen, 0, par);
+}
+
 //-----------------------------------------------------------------------------
 // Wait a certain time for tag response
 //  If a response is captured return TRUE
@@ -1698,12 +1881,12 @@ void ReaderMifare(uint32_t parameter)
 
        tracing = FALSE;
        byte_t nt[4] = {0,0,0,0};
-       byte_t nt_attacked[4];
+       byte_t nt_attacked[4], nt_noattack[4];
        byte_t par_list[8] = {0,0,0,0,0,0,0,0};
        byte_t ks_list[8] = {0,0,0,0,0,0,0,0};
-       num_to_bytes(parameter, 4, nt_attacked);
+       num_to_bytes(parameter, 4, nt_noattack);
        int isOK = 0, isNULL = 0;
-       
+
        while(TRUE)
        {
                LED_C_ON();
@@ -1732,6 +1915,8 @@ void ReaderMifare(uint32_t parameter)
                // Receive 4 bit answer
                if (ReaderReceive(receivedAnswer))
                {
+                       if ( (parameter != 0) && (memcmp(nt, nt_noattack, 4) == 0) ) continue;
+
                        isNULL = (nt_attacked[0] = 0) && (nt_attacked[1] = 0) && (nt_attacked[2] = 0) && (nt_attacked[3] = 0);
                        if ( (isNULL != 0 ) && (memcmp(nt, nt_attacked, 4) != 0) ) continue;
 
@@ -1786,570 +1971,427 @@ void ReaderMifare(uint32_t parameter)
        LEDsoff();
        tracing = TRUE;
        
-//     DbpString("COMMAND mifare FINISHED");
+       if (MF_DBGLEVEL >= 1)   DbpString("COMMAND mifare FINISHED");
 }
 
-//-----------------------------------------------------------------------------
-// Select, Authenticaate, Read an MIFARE tag. 
-// read block
-//-----------------------------------------------------------------------------
-void MifareReadBlock(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)
-{
-  // params
-       uint8_t blockNo = arg0;
-       uint8_t keyType = arg1;
-       uint64_t ui64Key = 0;
-       ui64Key = bytes_to_num(datain, 6);
-       
-       // variables
-       byte_t isOK = 0;
-       byte_t dataoutbuf[16];
-       uint8_t uid[8];
-       uint32_t cuid;
-       struct Crypto1State mpcs = {0, 0};
-       struct Crypto1State *pcs;
-       pcs = &mpcs;
-
-       // clear trace
-       traceLen = 0;
-//     tracing = false;
-
-       iso14443a_setup();
-
-       LED_A_ON();
-       LED_B_OFF();
-       LED_C_OFF();
-
-       while (true) {
-               if(!iso14443a_select_card(uid, NULL, &cuid)) {
-                       Dbprintf("Can't select card");
-                       break;
-               };
-
-               if(mifare_classic_auth(pcs, cuid, blockNo, keyType, ui64Key, AUTH_FIRST)) {
-                       Dbprintf("Auth error");
-                       break;
-               };
-               
-               if(mifare_classic_readblock(pcs, cuid, blockNo, dataoutbuf)) {
-                       Dbprintf("Read block error");
-                       break;
-               };
-
-               if(mifare_classic_halt(pcs, cuid)) {
-                       Dbprintf("Halt error");
-                       break;
-               };
-               
-               isOK = 1;
-               break;
-       }
-       
-       //  ----------------------------- crypto1 destroy
-       crypto1_destroy(pcs);
-       
-//    DbpString("READ BLOCK FINISHED");
-
-       // add trace trailer
-       uid[0] = 0xff;
-       uid[1] = 0xff;
-       uid[2] = 0xff;
-       uid[3] = 0xff;
-       LogTrace(uid, 4, 0, 0, TRUE);
-
-       UsbCommand ack = {CMD_ACK, {isOK, 0, 0}};
-       memcpy(ack.d.asBytes, dataoutbuf, 16);
-       
-       LED_B_ON();
-       UsbSendPacket((uint8_t *)&ack, sizeof(UsbCommand));
-       LED_B_OFF();
-
-
-  // Thats it...
-       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-       LEDsoff();
-//  tracing = TRUE;
-
-}
 
 //-----------------------------------------------------------------------------
-// Select, Authenticaate, Read an MIFARE tag
-// read sector (data = 4 x 16 bytes = 64 bytes)
+// MIFARE 1K simulate
+// 
 //-----------------------------------------------------------------------------
-void MifareReadSector(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)
+void Mifare1ksim(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)
 {
-  // params
-       uint8_t sectorNo = arg0;
-       uint8_t keyType = arg1;
-       uint64_t ui64Key = 0;
-       ui64Key = bytes_to_num(datain, 6);
-       
-       // variables
-       byte_t isOK = 0;
-       byte_t dataoutbuf[16 * 4];
-       uint8_t uid[8];
-       uint32_t cuid;
+       int cardSTATE = MFEMUL_NOFIELD;
+       int _7BUID = 0;
+       int vHf = 0;    // in mV
+       int nextCycleTimeout = 0;
+       int res;
+//     uint32_t timer = 0;
+       uint32_t selTimer = 0;
+       uint32_t authTimer = 0;
+       uint32_t par = 0;
+       int len = 0;
+       uint8_t cardWRBL = 0;
+       uint8_t cardAUTHSC = 0;
+       uint8_t cardAUTHKEY = 0xff;  // no authentication
+       uint32_t cardRn = 0;
+       uint32_t cardRr = 0;
+       uint32_t cuid = 0;
+       uint32_t rn_enc = 0;
+       uint32_t ans = 0;
+       uint32_t cardINTREG = 0;
+       uint8_t cardINTBLOCK = 0;
        struct Crypto1State mpcs = {0, 0};
        struct Crypto1State *pcs;
        pcs = &mpcs;
-
-       // clear trace
-       traceLen = 0;
-//     tracing = false;
-
-       iso14443a_setup();
-
-       LED_A_ON();
-       LED_B_OFF();
-       LED_C_OFF();
-
-       while (true) {
-               if(!iso14443a_select_card(uid, NULL, &cuid)) {
-                       Dbprintf("Can't select card");
-                       break;
-               };
-
-               if(mifare_classic_auth(pcs, cuid, sectorNo * 4, keyType, ui64Key, AUTH_FIRST)) {
-                       Dbprintf("Auth error");
-                       break;
-               };
-               
-               if(mifare_classic_readblock(pcs, cuid, sectorNo * 4 + 0, dataoutbuf + 16 * 0)) {
-                       Dbprintf("Read block 0 error");
-                       break;
-               };
-               if(mifare_classic_readblock(pcs, cuid, sectorNo * 4 + 1, dataoutbuf + 16 * 1)) {
-                       Dbprintf("Read block 1 error");
-                       break;
-               };
-               if(mifare_classic_readblock(pcs, cuid, sectorNo * 4 + 2, dataoutbuf + 16 * 2)) {
-                       Dbprintf("Read block 2 error");
-                       break;
-               };
-               if(mifare_classic_readblock(pcs, cuid, sectorNo * 4 + 3, dataoutbuf + 16 * 3)) {
-                       Dbprintf("Read block 3 error");
-                       break;
-               };
-               
-               if(mifare_classic_halt(pcs, cuid)) {
-                       Dbprintf("Halt error");
-                       break;
-               };
-
-               isOK = 1;
-               break;
-       }
        
-       //  ----------------------------- crypto1 destroy
-       crypto1_destroy(pcs);
-       
-//    DbpString("READ BLOCK FINISHED");
-
-       // add trace trailer
-       uid[0] = 0xff;
-       uid[1] = 0xff;
-       uid[2] = 0xff;
-       uid[3] = 0xff;
-       LogTrace(uid, 4, 0, 0, TRUE);
-
-       UsbCommand ack = {CMD_ACK, {isOK, 0, 0}};
-       memcpy(ack.d.asBytes, dataoutbuf, 16 * 2);
-       
-       LED_B_ON();
-       UsbSendPacket((uint8_t *)&ack, sizeof(UsbCommand));
-
-       SpinDelay(100);
+       uint8_t* receivedCmd = eml_get_bigbufptr_recbuf();
+       uint8_t *response = eml_get_bigbufptr_sendbuf();
        
-       memcpy(ack.d.asBytes, dataoutbuf + 16 * 2, 16 * 2);
-       UsbSendPacket((uint8_t *)&ack, sizeof(UsbCommand));
-       LED_B_OFF();    
-
-       // Thats it...
-       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-       LEDsoff();
-//  tracing = TRUE;
-
-}
+       static uint8_t rATQA[] = {0x04, 0x00}; // Mifare classic 1k 4BUID
 
-//-----------------------------------------------------------------------------
-// Select, Authenticaate, Read an MIFARE tag. 
-// read block
-//-----------------------------------------------------------------------------
-void MifareWriteBlock(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)
-{
-       // params
-       uint8_t blockNo = arg0;
-       uint8_t keyType = arg1;
-       uint64_t ui64Key = 0;
-       byte_t blockdata[16];
-
-       ui64Key = bytes_to_num(datain, 6);
-       memcpy(blockdata, datain + 10, 16);
-       
-       // variables
-       byte_t isOK = 0;
-       uint8_t uid[8];
-       uint32_t cuid;
-       struct Crypto1State mpcs = {0, 0};
-       struct Crypto1State *pcs;
-       pcs = &mpcs;
-
-       // clear trace
-       traceLen = 0;
-//  tracing = false;
-
-       iso14443a_setup();
-
-       LED_A_ON();
-       LED_B_OFF();
-       LED_C_OFF();
-
-       while (true) {
-               if(!iso14443a_select_card(uid, NULL, &cuid)) {
-                       Dbprintf("Can't select card");
-                       break;
-               };
-
-               if(mifare_classic_auth(pcs, cuid, blockNo, keyType, ui64Key, AUTH_FIRST)) {
-                       Dbprintf("Auth error");
-                       break;
-               };
-               
-               if(mifare_classic_writeblock(pcs, cuid, blockNo, blockdata)) {
-                       Dbprintf("Write block error");
-                       break;
-               };
-
-               if(mifare_classic_halt(pcs, cuid)) {
-                       Dbprintf("Halt error");
-                       break;
-               };
+       static uint8_t rUIDBCC1[] = {0xde, 0xad, 0xbe, 0xaf, 0x62}; 
+       static uint8_t rUIDBCC2[] = {0xde, 0xad, 0xbe, 0xaf, 0x62}; // !!!
                
-               isOK = 1;
-               break;
-       }
-       
-       //  ----------------------------- crypto1 destroy
-       crypto1_destroy(pcs);
-       
-//  DbpString("WRITE BLOCK FINISHED");
+       static uint8_t rSAK[] = {0x08, 0xb6, 0xdd};
+       static uint8_t rSAK1[] = {0x04, 0xda, 0x17};
 
-       // add trace trailer
-       uid[0] = 0xff;
-       uid[1] = 0xff;
-       uid[2] = 0xff;
-       uid[3] = 0xff;
-       LogTrace(uid, 4, 0, 0, TRUE);
-
-       UsbCommand ack = {CMD_ACK, {isOK, 0, 0}};
-       
-       LED_B_ON();
-       UsbSendPacket((uint8_t *)&ack, sizeof(UsbCommand));
-       LED_B_OFF();    
-
-
-       // Thats it...
-       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-       LEDsoff();
-//  tracing = TRUE;
-
-}
-
-// Return 1 if the nonce is invalid else return 0
-int valid_nonce(uint32_t Nt, uint32_t NtEnc, uint32_t Ks1, byte_t * parity) {
-       return ((oddparity((Nt >> 24) & 0xFF) == ((parity[0]) ^ oddparity((NtEnc >> 24) & 0xFF) ^ BIT(Ks1,16))) & \
-       (oddparity((Nt >> 16) & 0xFF) == ((parity[1]) ^ oddparity((NtEnc >> 16) & 0xFF) ^ BIT(Ks1,8))) & \
-       (oddparity((Nt >> 8) & 0xFF) == ((parity[2]) ^ oddparity((NtEnc >> 8) & 0xFF) ^ BIT(Ks1,0)))) ? 1 : 0;
-}
-
-
-//-----------------------------------------------------------------------------
-// MIFARE nested authentication. 
-// 
-//-----------------------------------------------------------------------------
-void MifareNested(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)
-{
-       // params
-       uint8_t blockNo = arg0;
-       uint8_t keyType = arg1;
-       uint64_t ui64Key = 0;
-
-       ui64Key = bytes_to_num(datain, 6);
-       
-       // variables
-       uint8_t targetBlockNo = blockNo + 1;
-       uint8_t targetKeyType = keyType;
-       int rtr, i, j, m, len;
-       int davg, dmin, dmax;
-       uint8_t uid[8];
-       uint32_t cuid, nt1, nt2, nttmp, nttest, par, ks1;
-       uint8_t par_array[4];
-       nestedVector nvector[3][10];
-       int nvectorcount[3] = {10, 10, 10};
-       int ncount = 0;
-       UsbCommand ack = {CMD_ACK, {0, 0, 0}};
-       struct Crypto1State mpcs = {0, 0};
-       struct Crypto1State *pcs;
-       pcs = &mpcs;
-       uint8_t* receivedAnswer = mifare_get_bigbufptr();
+       static uint8_t rAUTH_NT[] = {0x01, 0x02, 0x03, 0x04};
+//     static uint8_t rAUTH_NT[] = {0x1a, 0xac, 0xff, 0x4f};
+       static uint8_t rAUTH_AT[] = {0x00, 0x00, 0x00, 0x00};
 
        // clear trace
        traceLen = 0;
-  tracing = false;
+       tracing = true;
 
-       iso14443a_setup();
-
-       LED_A_ON();
-       LED_B_ON();
-       LED_C_OFF();
-
-  FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-  SpinDelay(200);
+  // Authenticate response - nonce
+       uint32_t nonce = bytes_to_num(rAUTH_NT, 4);
        
-       davg = dmax = 0;
-       dmin = 2000;
-
-       // test nonce distance
-       for (rtr = 0; rtr < 10; rtr++) {
-    FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-    SpinDelay(100);
-    FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_MOD);
-
-    // Test if the action was cancelled
-    if(BUTTON_PRESS()) {
-      break;
-    }
-
-               if(!iso14443a_select_card(uid, NULL, &cuid)) {
-                       Dbprintf("Can't select card");
-                       break;
-               };
-               
-               if(mifare_classic_authex(pcs, cuid, blockNo, keyType, ui64Key, AUTH_FIRST, &nt1)) {
-                       Dbprintf("Auth1 error");
-                       break;
-               };
-
-               if(mifare_classic_authex(pcs, cuid, blockNo, keyType, ui64Key, AUTH_NESTED, &nt2)) {
-                       Dbprintf("Auth2 error");
-                       break;
-               };
-               
-               nttmp = prng_successor(nt1, 500);
-               for (i = 501; i < 2000; i++) {
-                       nttmp = prng_successor(nttmp, 1);
-                       if (nttmp == nt2) break;
-               }
-               
-               if (i != 2000) {
-                       davg += i;
-                       if (dmin > i) dmin = i;
-                       if (dmax < i) dmax = i;
-//                     Dbprintf("r=%d nt1=%08x nt2=%08x distance=%d", rtr, nt1, nt2, i);
-               }
+       // get UID from emul memory
+       emlGetMemBt(receivedCmd, 7, 1);
+       _7BUID = !(receivedCmd[0] == 0x00);
+       if (!_7BUID) {                     // ---------- 4BUID
+               rATQA[0] = 0x04;
+
+               emlGetMemBt(rUIDBCC1, 0, 4);
+               rUIDBCC1[4] = rUIDBCC1[0] ^ rUIDBCC1[1] ^ rUIDBCC1[2] ^ rUIDBCC1[3];
+       } else {                           // ---------- 7BUID
+               rATQA[0] = 0x44;
+
+               rUIDBCC1[0] = 0x88;
+               emlGetMemBt(&rUIDBCC1[1], 0, 3);
+               rUIDBCC1[4] = rUIDBCC1[0] ^ rUIDBCC1[1] ^ rUIDBCC1[2] ^ rUIDBCC1[3];
+               emlGetMemBt(rUIDBCC2, 3, 4);
+               rUIDBCC2[4] = rUIDBCC2[0] ^ rUIDBCC2[1] ^ rUIDBCC2[2] ^ rUIDBCC2[3];
        }
-       
-       if (rtr == 0)   return;
-
-       davg = davg / rtr;
-       Dbprintf("distance: min=%d max=%d avg=%d", dmin, dmax, davg);
 
-       LED_B_OFF();
+// --------------------------------------      test area
 
-  tracing = true;
-       
-       LED_C_ON();
+// --------------------------------------      END test area
+       // start mkseconds counter
+       StartCountUS();
 
-       //  get crypted nonces for target sector
-       for (rtr = 0; rtr < 2; rtr++) {
-//             Dbprintf("------------------------------");
-
-               FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-    SpinDelay(100);
-    FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_MOD);
+       // We need to listen to the high-frequency, peak-detected path.
+       SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
+       FpgaSetupSsc();
 
-    // Test if the action was cancelled
-    if(BUTTON_PRESS()) {
-      break;
-    }
+  FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_TAGSIM_LISTEN);
+       SpinDelay(200);
 
-               if(!iso14443a_select_card(uid, NULL, &cuid)) {
-                       Dbprintf("Can't select card");
-                       break;
-               };
-               
-               if(mifare_classic_authex(pcs, cuid, blockNo, keyType, ui64Key, AUTH_FIRST, &nt1)) {
-                       Dbprintf("Auth1 error");
-                       break;
-               };
+       if (MF_DBGLEVEL >= 1)   Dbprintf("Started. 7buid=%d", _7BUID);
+       // calibrate mkseconds counter
+       GetDeltaCountUS();
+       while (true) {
+               WDT_HIT();
 
-               // nested authentication
-               len = mifare_sendcmd_shortex(pcs, AUTH_NESTED, 0x60 + (targetKeyType & 0x01), targetBlockNo, receivedAnswer, &par);
-               if (len != 4) {
-                       Dbprintf("Auth2 error len=%d", len);
+               if(BUTTON_PRESS()) {
                        break;
-               };
-       
-               nt2 = bytes_to_num(receivedAnswer, 4);          
-//             Dbprintf("r=%d nt1=%08x nt2enc=%08x nt2par=%08x", rtr, nt1, nt2, par);
-               
-// -----------------------  test               
-/*     uint32_t d_nt, d_ks1, d_ks2, d_ks3, reader_challenge;
-       byte_t ar[4];
-
-       ar[0] = 0x55;
-       ar[1] = 0x41;
-       ar[2] = 0x49;
-       ar[3] = 0x92; 
-
-       crypto1_destroy(pcs);
-       crypto1_create(pcs, ui64Key);
-
-       // decrypt nt with help of new key 
-       d_nt = crypto1_word(pcs, nt2 ^ cuid, 1) ^ nt2;
-       
-       reader_challenge = d_nt;//(uint32_t)bytes_to_num(ar, 4); 
-       d_ks1 = crypto1_word(pcs, reader_challenge, 0);
-       d_ks2 = crypto1_word(pcs, 0, 0);
-       d_ks3 = crypto1_word(pcs, 0,0);
-               
-       Dbprintf("TST: ks1=%08x nt=%08x", d_ks1, d_nt);*/
-// -----------------------  test               
-               
-               // Parity validity check
-               for (i = 0; i < 4; i++) {
-                       par_array[i] = (oddparity(receivedAnswer[i]) != ((par & 0x08) >> 3));
-                       par = par << 1;
                }
-               
-               ncount = 0;
-               for (m = dmin - 10; m < dmax + 10; m++) {
-                       nttest = prng_successor(nt1, m);
-                       ks1 = nt2 ^ nttest;
-
-//--------------------------------------  test
-/*                     if (nttest == d_nt){
-                               Dbprintf("nttest=d_nt!  m=%d ks1=%08x nttest=%08x", m, ks1, nttest);
-                       }*/
-//--------------------------------------  test
-                       if (valid_nonce(nttest, nt2, ks1, par_array) && (ncount < 11)){
-                               
-                               nvector[2][ncount].nt = nttest;
-                               nvector[2][ncount].ks1 = ks1;
-                               ncount++;
-                               nvectorcount[2] = ncount;
-                               
-//                             Dbprintf("valid m=%d ks1=%08x nttest=%08x", m, ks1, nttest);
-                       }
 
-               }
-               
-               // select vector with length less than got
-               if (nvectorcount[2] != 0) {
-                       m = 2;
-                       if (nvectorcount[2] < nvectorcount[1]) m = 1;
-                       if (nvectorcount[2] < nvectorcount[0]) m = 0;
-                       if (m != 2) {
-                               for (i = 0; i < nvectorcount[m]; i++) {
-                                       nvector[m][i] = nvector[2][i];
-                               }
-                               nvectorcount[m] = nvectorcount[2];
+               // find reader field
+               // Vref = 3300mV, and an 10:1 voltage divider on the input
+               // can measure voltages up to 33000 mV
+               if (cardSTATE == MFEMUL_NOFIELD) {
+                       vHf = (33000 * AvgAdc(ADC_CHAN_HF)) >> 10;
+                       if (vHf > MF_MINFIELDV) {
+                               cardSTATE_TO_IDLE();
+                               LED_A_ON();
+                       }
+               } 
+
+               if (cardSTATE != MFEMUL_NOFIELD) {
+                       res = EmGetCmd(receivedCmd, &len, 100); // (+ nextCycleTimeout)
+                       if (res == 2) {
+                               cardSTATE = MFEMUL_NOFIELD;
+                               LEDsoff();
+                               continue;
                        }
+                       if(res) break;
                }
                
-//             Dbprintf("vector count: 1=%d 2=%d 3=%d", nvectorcount[0], nvectorcount[1], nvectorcount[2]);
-       }
-
-       LED_C_OFF();
-
-       
-       //  ----------------------------- crypto1 destroy
-       crypto1_destroy(pcs);
-       
-       // add trace trailer
-       uid[0] = 0xff;
-       uid[1] = 0xff;
-       uid[2] = 0xff;
-       uid[3] = 0xff;
-       LogTrace(uid, 4, 0, 0, TRUE);
-
-       for (i = 0; i < 2; i++) {
-               for (j = 0; j < nvectorcount[i]; j += 5) {
-                       ncount = nvectorcount[i] - j;
-                       if (ncount > 5) ncount = 5; 
-
-                       ack.arg[0] = 0; // isEOF = 0
-                       ack.arg[1] = ncount;
-                       ack.arg[2] = targetBlockNo + (targetKeyType * 0x100);
-                       memset(ack.d.asBytes, 0x00, sizeof(ack.d.asBytes));
-                       
-                       memcpy(ack.d.asBytes, &cuid, 4);
-                       for (m = 0; m < ncount; m++) {
-                               memcpy(ack.d.asBytes + 8 + m * 8 + 0, &nvector[i][m + j].nt, 4);
-                               memcpy(ack.d.asBytes + 8 + m * 8 + 4, &nvector[i][m + j].ks1, 4);
+               nextCycleTimeout = 0;
+               
+//             if (len) Dbprintf("len:%d cmd: %02x %02x %02x %02x", len, receivedCmd[0], receivedCmd[1], receivedCmd[2], receivedCmd[3]);
+
+               if (len != 4 && cardSTATE != MFEMUL_NOFIELD) { // len != 4 <---- speed up the code 4 authentication
+                       // REQ or WUP request in ANY state and WUP in HALTED state
+                       if (len == 1 && ((receivedCmd[0] == 0x26 && cardSTATE != MFEMUL_HALTED) || receivedCmd[0] == 0x52)) {
+                               selTimer = GetTickCount();
+                               EmSendCmdEx(rATQA, sizeof(rATQA), (receivedCmd[0] == 0x52));
+                               cardSTATE = MFEMUL_SELECT1;
+
+                               // init crypto block
+                               LED_B_OFF();
+                               LED_C_OFF();
+                               crypto1_destroy(pcs);
+                               cardAUTHKEY = 0xff;
                        }
-       
-                       LED_B_ON();
-                       SpinDelay(100);
-                       UsbSendPacket((uint8_t *)&ack, sizeof(UsbCommand));
-                       LED_B_OFF();    
                }
-       }
-
-       // finalize list
-       ack.arg[0] = 1; // isEOF = 1
-       ack.arg[1] = 0;
-       ack.arg[2] = 0;
-       memset(ack.d.asBytes, 0x00, sizeof(ack.d.asBytes));
-       
-       LED_B_ON();
-       SpinDelay(300);
-       UsbSendPacket((uint8_t *)&ack, sizeof(UsbCommand));
-       LED_B_OFF();    
-
-       DbpString("NESTED FINISHED");
-
-       // Thats it...
-       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-       LEDsoff();
-//  tracing = TRUE;
-
-}
-
-//-----------------------------------------------------------------------------
-// MIFARE 1K simulate. 
-// 
-//-----------------------------------------------------------------------------
-void Mifare1ksim(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)
-{
-       int cardSTATE = MFEMUL_NOFIELD;
-
-       while (true) {
-
-               if(BUTTON_PRESS()) {
-      break;
-    }
-       
+               
                switch (cardSTATE) {
                        case MFEMUL_NOFIELD:{
                                break;
                        }
+                       case MFEMUL_HALTED:{
+                               break;
+                       }
                        case MFEMUL_IDLE:{
                                break;
                        }
                        case MFEMUL_SELECT1:{
+                               // select all
+                               if (len == 2 && (receivedCmd[0] == 0x93 && receivedCmd[1] == 0x20)) {
+                                       EmSendCmd(rUIDBCC1, sizeof(rUIDBCC1));
+                                       break;
+                               }
+
+                               // select card
+                               if (len == 9 && 
+                                               (receivedCmd[0] == 0x93 && receivedCmd[1] == 0x70 && memcmp(&receivedCmd[2], rUIDBCC1, 4) == 0)) {
+                                       if (!_7BUID) 
+                                               EmSendCmd(rSAK, sizeof(rSAK));
+                                       else
+                                               EmSendCmd(rSAK1, sizeof(rSAK1));
+
+                                       cuid = bytes_to_num(rUIDBCC1, 4);
+                                       if (!_7BUID) {
+                                               cardSTATE = MFEMUL_WORK;
+                                               LED_B_ON();
+                                               if (MF_DBGLEVEL >= 4)   Dbprintf("--> WORK. anticol1 time: %d", GetTickCount() - selTimer);
+                                               break;
+                                       } else {
+                                               cardSTATE = MFEMUL_SELECT2;
+                                               break;
+                                       }
+                               }
+                               
                                break;
                        }
                        case MFEMUL_SELECT2:{
-                               break;
+                               if (!len) break;
+                       
+                               if (len == 2 && (receivedCmd[0] == 0x95 && receivedCmd[1] == 0x20)) {
+                                       EmSendCmd(rUIDBCC2, sizeof(rUIDBCC2));
+                                       break;
+                               }
+
+                               // select 2 card
+                               if (len == 9 && 
+                                               (receivedCmd[0] == 0x95 && receivedCmd[1] == 0x70 && memcmp(&receivedCmd[2], rUIDBCC2, 4) == 0)) {
+                                       EmSendCmd(rSAK, sizeof(rSAK));
+
+                                       cuid = bytes_to_num(rUIDBCC2, 4);
+                                       cardSTATE = MFEMUL_WORK;
+                                       LED_B_ON();
+                                       if (MF_DBGLEVEL >= 4)   Dbprintf("--> WORK. anticol2 time: %d", GetTickCount() - selTimer);
+                                       break;
+                               }
+                               
+                               // i guess there is a command). go into the work state.
+                               if (len != 4) break;
+                               cardSTATE = MFEMUL_WORK;
+                               goto lbWORK;
                        }
                        case MFEMUL_AUTH1:{
-                               break;
+                               if (len == 8) {
+                                       // --- crypto
+                                       rn_enc = bytes_to_num(receivedCmd, 4);
+                                       cardRn = rn_enc ^ crypto1_word(pcs, rn_enc , 1);
+                                       cardRr = bytes_to_num(&receivedCmd[4], 4) ^ crypto1_word(pcs, 0, 0);
+                                       // test if auth OK
+                                       if (cardRr != prng_successor(nonce, 64)){
+                                               if (MF_DBGLEVEL >= 4)   Dbprintf("AUTH FAILED. cardRr=%08x, succ=%08x", cardRr, prng_successor(nonce, 64));
+                                               cardSTATE_TO_IDLE();
+                                               break;
+                                       }
+                                       ans = prng_successor(nonce, 96) ^ crypto1_word(pcs, 0, 0);
+                                       num_to_bytes(ans, 4, rAUTH_AT);
+                                       // --- crypto
+                                       EmSendCmd(rAUTH_AT, sizeof(rAUTH_AT));
+                                       cardSTATE = MFEMUL_AUTH2;
+                               } else {
+                                       cardSTATE_TO_IDLE();
+                               }
+                               if (cardSTATE != MFEMUL_AUTH2) break;
                        }
                        case MFEMUL_AUTH2:{
+                               LED_C_ON();
+                               cardSTATE = MFEMUL_WORK;
+                               if (MF_DBGLEVEL >= 4)   Dbprintf("AUTH COMPLETED. sec=%d, key=%d time=%d", cardAUTHSC, cardAUTHKEY, GetTickCount() - authTimer);
                                break;
                        }
-                       case MFEMUL_HALTED:{
+                       case MFEMUL_WORK:{
+lbWORK:        if (len == 0) break;
+                               
+                               if (cardAUTHKEY == 0xff) {
+                                       // first authentication
+                                       if (len == 4 && (receivedCmd[0] == 0x60 || receivedCmd[0] == 0x61)) {
+                                               authTimer = GetTickCount();
+
+                                               cardAUTHSC = receivedCmd[1] / 4;  // received block num
+                                               cardAUTHKEY = receivedCmd[0] - 0x60;
+
+                                               // --- crypto
+                                               crypto1_create(pcs, emlGetKey(cardAUTHSC, cardAUTHKEY));
+                                               ans = nonce ^ crypto1_word(pcs, cuid ^ nonce, 0); 
+                                               num_to_bytes(nonce, 4, rAUTH_AT);
+                                               EmSendCmd(rAUTH_AT, sizeof(rAUTH_AT));
+                                               // --- crypto
+                                               
+//   last working revision 
+//                                             EmSendCmd14443aRaw(resp1, resp1Len, 0);
+//                                             LogTrace(NULL, 0, GetDeltaCountUS(), 0, true);
+
+                                               cardSTATE = MFEMUL_AUTH1;
+                                               nextCycleTimeout = 10;
+                                               break;
+                                       }
+                               } else {
+                                       // decrypt seqence
+                                       mf_crypto1_decrypt(pcs, receivedCmd, len);
+                                       
+                                       // nested authentication
+                                       if (len == 4 && (receivedCmd[0] == 0x60 || receivedCmd[0] == 0x61)) {
+                                               authTimer = GetTickCount();
+
+                                               cardAUTHSC = receivedCmd[1] / 4;  // received block num
+                                               cardAUTHKEY = receivedCmd[0] - 0x60;
+
+                                               // --- crypto
+                                               crypto1_create(pcs, emlGetKey(cardAUTHSC, cardAUTHKEY));
+                                               ans = nonce ^ crypto1_word(pcs, cuid ^ nonce, 0); 
+                                               num_to_bytes(ans, 4, rAUTH_AT);
+                                               EmSendCmd(rAUTH_AT, sizeof(rAUTH_AT));
+                                               // --- crypto
+
+                                               cardSTATE = MFEMUL_AUTH1;
+                                               nextCycleTimeout = 10;
+                                               break;
+                                       }
+                               }
+                               
+                               // rule 13 of 7.5.3. in ISO 14443-4. chaining shall be continued
+                               // BUT... ACK --> NACK
+                               if (len == 1 && receivedCmd[0] == CARD_ACK) {
+                                       EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
+                                       break;
+                               }
+                               
+                               // rule 12 of 7.5.3. in ISO 14443-4. R(NAK) --> R(ACK)
+                               if (len == 1 && receivedCmd[0] == CARD_NACK_NA) {
+                                       EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_ACK));
+                                       break;
+                               }
+                               
+                               // read block
+                               if (len == 4 && receivedCmd[0] == 0x30) {
+                                       if (receivedCmd[1] >= 16 * 4 || receivedCmd[1] / 4 != cardAUTHSC) {
+                                               EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
+                                               break;
+                                       }
+                                       emlGetMem(response, receivedCmd[1], 1);
+                                       AppendCrc14443a(response, 16);
+                                       mf_crypto1_encrypt(pcs, response, 18, &par);
+                                       EmSendCmdPar(response, 18, par);
+                                       break;
+                               }
+                               
+                               // write block
+                               if (len == 4 && receivedCmd[0] == 0xA0) {
+                                       if (receivedCmd[1] >= 16 * 4 || receivedCmd[1] / 4 != cardAUTHSC) {
+                                               EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
+                                               break;
+                                       }
+                                       EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_ACK));
+                                       nextCycleTimeout = 50;
+                                       cardSTATE = MFEMUL_WRITEBL2;
+                                       cardWRBL = receivedCmd[1];
+                                       break;
+                               }
+                       
+                               // works with cardINTREG
+                               
+                               // increment, decrement, restore
+                               if (len == 4 && (receivedCmd[0] == 0xC0 || receivedCmd[0] == 0xC1 || receivedCmd[0] == 0xC2)) {
+                                       if (receivedCmd[1] >= 16 * 4 || 
+                                                       receivedCmd[1] / 4 != cardAUTHSC || 
+                                                       emlCheckValBl(receivedCmd[1])) {
+                                               EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
+                                               break;
+                                       }
+                                       EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_ACK));
+                                       if (receivedCmd[0] == 0xC1)
+                                               cardSTATE = MFEMUL_INTREG_INC;
+                                       if (receivedCmd[0] == 0xC0)
+                                               cardSTATE = MFEMUL_INTREG_DEC;
+                                       if (receivedCmd[0] == 0xC2)
+                                               cardSTATE = MFEMUL_INTREG_REST;
+                                       cardWRBL = receivedCmd[1];
+                                       
+                                       break;
+                               }
+                               
+
+                               // transfer
+                               if (len == 4 && receivedCmd[0] == 0xB0) {
+                                       if (receivedCmd[1] >= 16 * 4 || receivedCmd[1] / 4 != cardAUTHSC) {
+                                               EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
+                                               break;
+                                       }
+                                       
+                                       if (emlSetValBl(cardINTREG, cardINTBLOCK, receivedCmd[1]))
+                                               EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
+                                       else
+                                               EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_ACK));
+                                               
+                                       break;
+                               }
+
+                               // halt
+                               if (len == 4 && (receivedCmd[0] == 0x50 && receivedCmd[1] == 0x00)) {
+                                       LED_B_OFF();
+                                       LED_C_OFF();
+                                       cardSTATE = MFEMUL_HALTED;
+                                       if (MF_DBGLEVEL >= 4)   Dbprintf("--> HALTED. Selected time: %d ms",  GetTickCount() - selTimer);
+                                       break;
+                               }
+                               
+                               // command not allowed
+                               if (len == 4) {
+                                       EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
+                                       break;
+                               }
+
+                               // case break
+                               break;
+                       }
+                       case MFEMUL_WRITEBL2:{
+                               if (len == 18){
+                                       mf_crypto1_decrypt(pcs, receivedCmd, len);
+                                       emlSetMem(receivedCmd, cardWRBL, 1);
+                                       EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_ACK));
+                                       cardSTATE = MFEMUL_WORK;
+                                       break;
+                               } else {
+                                       cardSTATE_TO_IDLE();
+                                       break;
+                               }
+                               break;
+                       }
+                       
+                       case MFEMUL_INTREG_INC:{
+                               mf_crypto1_decrypt(pcs, receivedCmd, len);
+                               memcpy(&ans, receivedCmd, 4);
+                               if (emlGetValBl(&cardINTREG, &cardINTBLOCK, cardWRBL)) {
+                                       EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
+                                       cardSTATE_TO_IDLE();
+                                       break;
+                               }
+                               cardINTREG = cardINTREG + ans;
+                               cardSTATE = MFEMUL_WORK;
+                               break;
+                       }
+                       case MFEMUL_INTREG_DEC:{
+                               mf_crypto1_decrypt(pcs, receivedCmd, len);
+                               memcpy(&ans, receivedCmd, 4);
+                               if (emlGetValBl(&cardINTREG, &cardINTBLOCK, cardWRBL)) {
+                                       EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
+                                       cardSTATE_TO_IDLE();
+                                       break;
+                               }
+                               cardINTREG = cardINTREG - ans;
+                               cardSTATE = MFEMUL_WORK;
+                               break;
+                       }
+                       case MFEMUL_INTREG_REST:{
+                               mf_crypto1_decrypt(pcs, receivedCmd, len);
+                               memcpy(&ans, receivedCmd, 4);
+                               if (emlGetValBl(&cardINTREG, &cardINTBLOCK, cardWRBL)) {
+                                       EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
+                                       cardSTATE_TO_IDLE();
+                                       break;
+                               }
+                               cardSTATE = MFEMUL_WORK;
                                break;
                        }
                
@@ -2357,4 +2399,12 @@ void Mifare1ksim(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)
        
        }
 
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+       LEDsoff();
+
+       // add trace trailer
+       memset(rAUTH_NT, 0x44, 4);
+       LogTrace(rAUTH_NT, 4, 0, 0, TRUE);
+
+       if (MF_DBGLEVEL >= 1)   Dbprintf("Emulator stopped. Tracing: %d  trace length: %d ",    tracing, traceLen);
 }
Impressum, Datenschutz