#include "cmdhw.h"
#include "cmdmain.h"
#include "cmddata.h"
+#include "data.h"
/* low-level hardware control */
static int CmdHelp(const char *Cmd);
-static void lookupChipID(uint32_t iChipID)
+static void lookupChipID(uint32_t iChipID, uint32_t mem_used)
{
char asBuff[100];
+ uint32_t mem_avail = 0;
+
switch(iChipID)
{
case 0x270B0A40:
switch((iChipID&0xF00)>>8)
{
case 0:
- sprintf(asBuff,"None");
+ mem_avail = 0;
break;
case 1:
- sprintf(asBuff,"8K bytes");
+ mem_avail = 8;
break;
case 2:
- sprintf(asBuff,"16K bytes");
+ mem_avail = 16;
break;
case 3:
- sprintf(asBuff,"32K bytes");
+ mem_avail = 32;
break;
case 5:
- sprintf(asBuff,"64K bytes");
+ mem_avail = 64;
break;
case 7:
- sprintf(asBuff,"128K bytes");
+ mem_avail = 128;
break;
case 9:
- sprintf(asBuff,"256K bytes");
+ mem_avail = 256;
break;
case 10:
- sprintf(asBuff,"512K bytes");
+ mem_avail = 512;
break;
case 12:
- sprintf(asBuff,"1024K bytes");
+ mem_avail = 1024;
break;
case 14:
- sprintf(asBuff,"2048K bytes");
+ mem_avail = 2048;
break;
}
- PrintAndLog("Nonvolatile Program Memory Size: %s",asBuff);
+ PrintAndLog("Nonvolatile Program Memory Size: %dK bytes. Used: %d bytes (%2.0f\%). Free: %d bytes (%2.0f\%).",
+ mem_avail,
+ mem_used,
+ mem_avail == 0 ? 0 : (float)mem_used/(mem_avail*1024)*100,
+ mem_avail*1024 - mem_used,
+ mem_avail == 0 ? 0 : (float)(mem_avail*1024-mem_used)/(mem_avail*1024)*100
+ );
switch((iChipID&0xF000)>>12)
{
case 0:
int CmdVersion(const char *Cmd)
{
- UsbCommand c = {CMD_VERSION};
- UsbCommand resp;
- SendCommand(&c);
- if (WaitForResponseTimeout(CMD_ACK,&resp,1000)) {
- lookupChipID(resp.arg[0]);
- }
- return 0;
+
+ clearCommandBuffer();
+ UsbCommand c = {CMD_VERSION};
+ static UsbCommand resp = {0, {0, 0, 0}};
+
+ if (resp.arg[0] == 0 && resp.arg[1] == 0) { // no cached information available
+ SendCommand(&c);
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1000)) {
+ PrintAndLog("Prox/RFID mark3 RFID instrument");
+ PrintAndLog((char*)resp.d.asBytes);
+ lookupChipID(resp.arg[0], resp.arg[1]);
+ }
+ } else {
+ PrintAndLog("[[[ Cached information ]]]\n");
+ PrintAndLog("Prox/RFID mark3 RFID instrument");
+ PrintAndLog((char*)resp.d.asBytes);
+ lookupChipID(resp.arg[0], resp.arg[1]);
+ PrintAndLog("");
+ }
+ return 0;
+}
+
+int CmdStatus(const char *Cmd)
+{
+ uint8_t speed_test_buffer[USB_CMD_DATA_SIZE];
+ sample_buf = speed_test_buffer;
+
+ clearCommandBuffer();
+ UsbCommand c = {CMD_STATUS};
+ SendCommand(&c);
+ if (!WaitForResponseTimeout(CMD_ACK,&c,1900)) {
+ PrintAndLog("Status command failed. USB Speed Test timed out");
+ }
+ return 0;
+}
+
+
+int CmdPing(const char *Cmd)
+{
+ clearCommandBuffer();
+ UsbCommand resp;
+ UsbCommand c = {CMD_PING};
+ SendCommand(&c);
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1000)) {
+ PrintAndLog("Ping successfull");
+ }else{
+ PrintAndLog("Ping failed");
+ }
+ return 0;
}
static command_t CommandTable[] =
{
- {"help", CmdHelp, 1, "This help"},
- {"detectreader", CmdDetectReader,0, "['l'|'h'] -- Detect external reader field (option 'l' or 'h' to limit to LF or HF)"},
- {"fpgaoff", CmdFPGAOff, 0, "Set FPGA off"},
- {"lcd", CmdLCD, 0, "<HEX command> <count> -- Send command/data to LCD"},
- {"lcdreset", CmdLCDReset, 0, "Hardware reset LCD"},
- {"readmem", CmdReadmem, 0, "[address] -- Read memory at decimal address from flash"},
- {"reset", CmdReset, 0, "Reset the Proxmark3"},
- {"setlfdivisor", CmdSetDivisor, 0, "<19 - 255> -- Drive LF antenna at 12Mhz/(divisor+1)"},
- {"setmux", CmdSetMux, 0, "<loraw|hiraw|lopkd|hipkd> -- Set the ADC mux to a specific value"},
- {"tune", CmdTune, 0, "Measure antenna tuning"},
- {"version", CmdVersion, 0, "Show version information about the connected Proxmark"},
- {NULL, NULL, 0, NULL}
+ {"help", CmdHelp, 1, "This help"},
+ {"detectreader", CmdDetectReader,0, "['l'|'h'] -- Detect external reader field (option 'l' or 'h' to limit to LF or HF)"},
+ {"fpgaoff", CmdFPGAOff, 0, "Set FPGA off"},
+ {"lcd", CmdLCD, 0, "<HEX command> <count> -- Send command/data to LCD"},
+ {"lcdreset", CmdLCDReset, 0, "Hardware reset LCD"},
+ {"readmem", CmdReadmem, 0, "[address] -- Read memory at decimal address from flash"},
+ {"reset", CmdReset, 0, "Reset the Proxmark3"},
+ {"setlfdivisor", CmdSetDivisor, 0, "<19 - 255> -- Drive LF antenna at 12Mhz/(divisor+1)"},
+ {"setmux", CmdSetMux, 0, "<loraw|hiraw|lopkd|hipkd> -- Set the ADC mux to a specific value"},
+ {"tune", CmdTune, 0, "Measure antenna tuning"},
+ {"version", CmdVersion, 0, "Show version information about the connected Proxmark"},
+ {"status", CmdStatus, 0, "Show runtime status information about the connected Proxmark"},
+ {"ping", CmdPing, 0, "Test if the pm3 is responsive"},
+ {NULL, NULL, 0, NULL}
};
int CmdHW(const char *Cmd)