#include "uart.h"
#include "ui.h"
#include "common.h"
-#include "data.h"
#include "util_posix.h"
// Declare globals.
// Serial port that we are communicating with the PM3 on.
-serial_port sp;
+static serial_port sp;
// If TRUE, then there is no active connection to the PM3, and we will drop commands sent.
static bool offline;
return offline;
}
+bool OpenProxmark(char *portname, bool waitCOMPort, int timeout) {
+ if (!waitCOMPort) {
+ sp = uart_open(portname);
+ } else {
+ printf("Waiting for Proxmark to appear on %s ", portname);
+ fflush(stdout);
+ int openCount = 0;
+ do {
+ sp = uart_open(portname);
+ msleep(1000);
+ printf(".");
+ fflush(stdout);
+ } while(++openCount < timeout && (sp == INVALID_SERIAL_PORT || sp == CLAIMED_SERIAL_PORT));
+ printf("\n");
+ }
+
+ // check result of uart opening
+ if (sp == INVALID_SERIAL_PORT) {
+ printf("ERROR: invalid serial port\n");
+ return false;
+ } else if (sp == CLAIMED_SERIAL_PORT) {
+ printf("ERROR: serial port is claimed by another process\n");
+ return false;
+ } else {
+ return true;
+ }
+}
+
+void CloseProxmark(void) {
+ uart_close(sp);
+}
+
void SendCommand(UsbCommand *c) {
#ifdef COMMS_DEBUG
printf("Sending %04x cmd\n", c->cmd);
Not good.../holiman
**/
while(txcmd_pending);
+
txcmd = *c;
txcmd_pending = true;
}
}
-//-----------------------------------------------------------------------------
-// Entry point into our code: called whenever we received a packet over USB
-// that we weren't necessarily expecting, for example a debug print.
-//-----------------------------------------------------------------------------
-void UsbCommandReceived(UsbCommand *UC)
+//----------------------------------------------------------------------------------
+// Entry point into our code: called whenever we received a packet over USB.
+// Handle debug commands directly, store all other commands in circular buffer.
+//----------------------------------------------------------------------------------
+static void UsbCommandReceived(UsbCommand *UC)
{
switch(UC->cmd) {
// First check if we are handling a debug message
return;
} break;
- case CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K: {
- // FIXME: This does unsanitised copies into memory when we don't know
- // the size of the buffer.
- memcpy(sample_buf+(UC->arg[0]),UC->d.asBytes,UC->arg[1]);
- return;
- } break;
-
default:
- storeCommand(UC);
+ storeCommand(UC);
break;
}
#endif
#endif
*uart_receiver(void *targ) {
- receiver_arg *arg = (receiver_arg*)targ;
+ receiver_arg *conn = (receiver_arg*)targ;
size_t rxlen;
uint8_t rx[sizeof(UsbCommand)];
uint8_t *prx = rx;
- while (arg->run) {
+ while (conn->run) {
rxlen = 0;
if (uart_receive(sp, prx, sizeof(UsbCommand) - (prx-rx), &rxlen) && rxlen) {
prx += rxlen;
}
+
+/**
+ * Data transfer from Proxmark to client. This method times out after
+ * ms_timeout milliseconds.
+ * @brief GetFromBigBuf
+ * @param dest Destination address for transfer
+ * @param bytes number of bytes to be transferred
+ * @param start_index offset into Proxmark3 BigBuf[]
+ * @param response struct to copy last command (CMD_ACK) into
+ * @param ms_timeout timeout in milliseconds
+ * @param show_warning display message after 2 seconds
+ * @return true if command was returned, otherwise false
+ */
+bool GetFromBigBuf(uint8_t *dest, int bytes, int start_index, UsbCommand *response, size_t ms_timeout, bool show_warning)
+{
+ UsbCommand c = {CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K, {start_index, bytes, 0}};
+ SendCommand(&c);
+
+ uint64_t start_time = msclock();
+
+ UsbCommand resp;
+ if (response == NULL) {
+ response = &resp;
+ }
+
+ int bytes_completed = 0;
+ while(true) {
+ if (getCommand(response)) {
+ if (response->cmd == CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K) {
+ int copy_bytes = MIN(bytes - bytes_completed, response->arg[1]);
+ memcpy(dest + response->arg[0], response->d.asBytes, copy_bytes);
+ bytes_completed += copy_bytes;
+ } else if (response->cmd == CMD_ACK) {
+ return true;
+ }
+ }
+
+ if (msclock() - start_time > ms_timeout) {
+ break;
+ }
+
+ if (msclock() - start_time > 2000 && show_warning) {
+ PrintAndLog("Waiting for a response from the proxmark...");
+ PrintAndLog("You can cancel this operation by pressing the pm3 button");
+ show_warning = false;
+ }
+ }
+
+ return false;
+}
+
+
/**
* Waits for a certain response type. This method waits for a maximum of
* ms_timeout milliseconds for a specified response command.
* @param cmd command to wait for, or CMD_UNKNOWN to take any command.
* @param response struct to copy received command into.
* @param ms_timeout
- * @param show_warning
+ * @param show_warning display message after 2 seconds
* @return true if command was returned, otherwise false
*/
bool WaitForResponseTimeoutW(uint32_t cmd, UsbCommand* response, size_t ms_timeout, bool show_warning) {