// High frequency MIFARE commands\r
//-----------------------------------------------------------------------------\r
\r
-#include "cmdhfmf.h"\r
-#include "./nonce2key/nonce2key.h"\r
+#include <inttypes.h>\r
+#include <stdio.h>\r
+#include <stdlib.h>\r
+#include "proxmark3.h"\r
+#include "cmdmain.h"\r
+#include "util.h"\r
+#include "ui.h"\r
+#include "mifarehost.h"\r
+#include "mifare.h"\r
+#include "nonce2key/nonce2key.h"\r
+\r
+#define NESTED_SECTOR_RETRY 10 // how often we try mfested() until we give up\r
+\r
\r
static int CmdHelp(const char *Cmd);\r
\r
SendCommand(&c);\r
\r
//flush queue\r
- while (ukbhit()) getchar();\r
-\r
+ while (ukbhit()) {\r
+ int c = getchar(); (void) c;\r
+ }\r
+ \r
// wait cycle\r
while (true) {\r
printf(".");\r
} else {\r
isOK = 0;\r
printf("------------------------------------------------------------------\n");\r
- PrintAndLog("Found valid key:%012"llx" \n", r_key);\r
+ PrintAndLog("Found valid key:%012" PRIx64 " \n", r_key);\r
}\r
\r
PrintAndLog("");\r
\r
// Read keys A from file\r
for (sectorNo=0; sectorNo<numSectors; sectorNo++) {\r
- if (fread( keyA[sectorNo], 1, 6, fin ) == 0) {\r
+ size_t bytes_read = fread(keyA[sectorNo], 1, 6, fin);\r
+ if (bytes_read != 6) {\r
PrintAndLog("File reading error.");\r
fclose(fin);\r
return 2;\r
\r
// Read keys B from file\r
for (sectorNo=0; sectorNo<numSectors; sectorNo++) {\r
- if (fread( keyB[sectorNo], 1, 6, fin ) == 0) {\r
+ size_t bytes_read = fread(keyB[sectorNo], 1, 6, fin);\r
+ if (bytes_read != 6) {\r
PrintAndLog("File reading error.");\r
fclose(fin);\r
return 2;\r
PrintAndLog("|-----------------------------------------|");\r
PrintAndLog("|------ Reading sector access bits...-----|");\r
PrintAndLog("|-----------------------------------------|");\r
- \r
+ uint8_t tries = 0;\r
for (sectorNo = 0; sectorNo < numSectors; sectorNo++) {\r
- UsbCommand c = {CMD_MIFARE_READBL, {FirstBlockOfSector(sectorNo) + NumBlocksPerSector(sectorNo) - 1, 0, 0}};\r
- memcpy(c.d.asBytes, keyA[sectorNo], 6);\r
- SendCommand(&c);\r
+ for (tries = 0; tries < 3; tries++) { \r
+ UsbCommand c = {CMD_MIFARE_READBL, {FirstBlockOfSector(sectorNo) + NumBlocksPerSector(sectorNo) - 1, 0, 0}};\r
+ memcpy(c.d.asBytes, keyA[sectorNo], 6);\r
+ SendCommand(&c);\r
\r
- if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {\r
- uint8_t isOK = resp.arg[0] & 0xff;\r
- uint8_t *data = resp.d.asBytes;\r
- if (isOK){\r
- rights[sectorNo][0] = ((data[7] & 0x10)>>2) | ((data[8] & 0x1)<<1) | ((data[8] & 0x10)>>4); // C1C2C3 for data area 0\r
- rights[sectorNo][1] = ((data[7] & 0x20)>>3) | ((data[8] & 0x2)<<0) | ((data[8] & 0x20)>>5); // C1C2C3 for data area 1\r
- rights[sectorNo][2] = ((data[7] & 0x40)>>4) | ((data[8] & 0x4)>>1) | ((data[8] & 0x40)>>6); // C1C2C3 for data area 2\r
- rights[sectorNo][3] = ((data[7] & 0x80)>>5) | ((data[8] & 0x8)>>2) | ((data[8] & 0x80)>>7); // C1C2C3 for sector trailer\r
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {\r
+ uint8_t isOK = resp.arg[0] & 0xff;\r
+ uint8_t *data = resp.d.asBytes;\r
+ if (isOK){\r
+ rights[sectorNo][0] = ((data[7] & 0x10)>>2) | ((data[8] & 0x1)<<1) | ((data[8] & 0x10)>>4); // C1C2C3 for data area 0\r
+ rights[sectorNo][1] = ((data[7] & 0x20)>>3) | ((data[8] & 0x2)<<0) | ((data[8] & 0x20)>>5); // C1C2C3 for data area 1\r
+ rights[sectorNo][2] = ((data[7] & 0x40)>>4) | ((data[8] & 0x4)>>1) | ((data[8] & 0x40)>>6); // C1C2C3 for data area 2\r
+ rights[sectorNo][3] = ((data[7] & 0x80)>>5) | ((data[8] & 0x8)>>2) | ((data[8] & 0x80)>>7); // C1C2C3 for sector trailer\r
+ break;\r
+ } else if (tries == 2) { // on last try set defaults\r
+ PrintAndLog("Could not get access rights for sector %2d. Trying with defaults...", sectorNo);\r
+ rights[sectorNo][0] = rights[sectorNo][1] = rights[sectorNo][2] = 0x00;\r
+ rights[sectorNo][3] = 0x01;\r
+ }\r
} else {\r
- PrintAndLog("Could not get access rights for sector %2d. Trying with defaults...", sectorNo);\r
+ PrintAndLog("Command execute timeout when trying to read access rights for sector %2d. Trying with defaults...", sectorNo);\r
rights[sectorNo][0] = rights[sectorNo][1] = rights[sectorNo][2] = 0x00;\r
rights[sectorNo][3] = 0x01;\r
}\r
- } else {\r
- PrintAndLog("Command execute timeout when trying to read access rights for sector %2d. Trying with defaults...", sectorNo);\r
- rights[sectorNo][0] = rights[sectorNo][1] = rights[sectorNo][2] = 0x00;\r
- rights[sectorNo][3] = 0x01;\r
}\r
}\r
\r
for (sectorNo = 0; isOK && sectorNo < numSectors; sectorNo++) {\r
for (blockNo = 0; isOK && blockNo < NumBlocksPerSector(sectorNo); blockNo++) {\r
bool received = false;\r
- \r
- if (blockNo == NumBlocksPerSector(sectorNo) - 1) { // sector trailer. At least the Access Conditions can always be read with key A. \r
- UsbCommand c = {CMD_MIFARE_READBL, {FirstBlockOfSector(sectorNo) + blockNo, 0, 0}};\r
- memcpy(c.d.asBytes, keyA[sectorNo], 6);\r
- SendCommand(&c);\r
- received = WaitForResponseTimeout(CMD_ACK,&resp,1500);\r
- } else { // data block. Check if it can be read with key A or key B\r
- uint8_t data_area = sectorNo<32?blockNo:blockNo/5;\r
- if ((rights[sectorNo][data_area] == 0x03) || (rights[sectorNo][data_area] == 0x05)) { // only key B would work\r
- UsbCommand c = {CMD_MIFARE_READBL, {FirstBlockOfSector(sectorNo) + blockNo, 1, 0}};\r
- memcpy(c.d.asBytes, keyB[sectorNo], 6);\r
- SendCommand(&c);\r
- received = WaitForResponseTimeout(CMD_ACK,&resp,1500);\r
- } else if (rights[sectorNo][data_area] == 0x07) { // no key would work\r
- isOK = false;\r
- PrintAndLog("Access rights do not allow reading of sector %2d block %3d", sectorNo, blockNo);\r
- } else { // key A would work\r
+ for (tries = 0; tries < 3; tries++) { \r
+ if (blockNo == NumBlocksPerSector(sectorNo) - 1) { // sector trailer. At least the Access Conditions can always be read with key A. \r
UsbCommand c = {CMD_MIFARE_READBL, {FirstBlockOfSector(sectorNo) + blockNo, 0, 0}};\r
memcpy(c.d.asBytes, keyA[sectorNo], 6);\r
SendCommand(&c);\r
received = WaitForResponseTimeout(CMD_ACK,&resp,1500);\r
+ } else { // data block. Check if it can be read with key A or key B\r
+ uint8_t data_area = sectorNo<32?blockNo:blockNo/5;\r
+ if ((rights[sectorNo][data_area] == 0x03) || (rights[sectorNo][data_area] == 0x05)) { // only key B would work\r
+ UsbCommand c = {CMD_MIFARE_READBL, {FirstBlockOfSector(sectorNo) + blockNo, 1, 0}};\r
+ memcpy(c.d.asBytes, keyB[sectorNo], 6);\r
+ SendCommand(&c);\r
+ received = WaitForResponseTimeout(CMD_ACK,&resp,1500);\r
+ } else if (rights[sectorNo][data_area] == 0x07) { // no key would work\r
+ isOK = false;\r
+ PrintAndLog("Access rights do not allow reading of sector %2d block %3d", sectorNo, blockNo);\r
+ tries = 2;\r
+ } else { // key A would work\r
+ UsbCommand c = {CMD_MIFARE_READBL, {FirstBlockOfSector(sectorNo) + blockNo, 0, 0}};\r
+ memcpy(c.d.asBytes, keyA[sectorNo], 6);\r
+ SendCommand(&c);\r
+ received = WaitForResponseTimeout(CMD_ACK,&resp,1500);\r
+ }\r
+ }\r
+ if (received) {\r
+ isOK = resp.arg[0] & 0xff;\r
+ if (isOK) break;\r
}\r
}\r
\r
}\r
\r
for (sectorNo = 0; sectorNo < numSectors; sectorNo++) {\r
- if (fread(keyA[sectorNo], 1, 6, fkeys) == 0) {\r
+ size_t bytes_read = fread(keyA[sectorNo], 1, 6, fkeys);\r
+ if (bytes_read != 6) {\r
PrintAndLog("File reading error (dumpkeys.bin).");\r
-\r
fclose(fkeys);\r
return 2;\r
}\r
}\r
\r
for (sectorNo = 0; sectorNo < numSectors; sectorNo++) {\r
- if (fread(keyB[sectorNo], 1, 6, fkeys) == 0) {\r
+ size_t bytes_read = fread(keyB[sectorNo], 1, 6, fkeys);\r
+ if (bytes_read != 6) {\r
PrintAndLog("File reading error (dumpkeys.bin).");\r
fclose(fkeys);\r
return 2;\r
UsbCommand c = {CMD_MIFARE_WRITEBL, {FirstBlockOfSector(sectorNo) + blockNo, keyType, 0}};\r
memcpy(c.d.asBytes, key, 6);\r
\r
- if (fread(bldata, 1, 16, fdump) == 0) {\r
+ size_t bytes_read = fread(bldata, 1, 16, fdump);\r
+ if (bytes_read != 16) {\r
PrintAndLog("File reading error (dumpdata.bin).");\r
fclose(fdump);\r
return 2;\r
return 0;\r
}\r
\r
+\r
+typedef struct {\r
+ uint64_t Key[2];\r
+ int foundKey[2];\r
+} sector_t;\r
+\r
+\r
int CmdHF14AMfNested(const char *Cmd)\r
{\r
int i, j, res, iterations;\r
- sector *e_sector = NULL;\r
+ sector_t *e_sector = NULL;\r
uint8_t blockNo = 0;\r
uint8_t keyType = 0;\r
uint8_t trgBlockNo = 0;\r
}\r
key64 = bytes_to_num(keyBlock, 6);\r
if (key64) {\r
- PrintAndLog("Found valid key:%012"llx, key64);\r
+ PrintAndLog("Found valid key:%012" PRIx64, key64);\r
\r
// transfer key to the emulator\r
if (transferToEml) {\r
clock_t time1;\r
time1 = clock();\r
\r
- e_sector = calloc(SectorsCnt, sizeof(sector));\r
+ e_sector = calloc(SectorsCnt, sizeof(sector_t));\r
if (e_sector == NULL) return 1;\r
\r
//test current key and additional standard keys first\r
\r
key64 = bytes_to_num(keyBlock, 6);\r
if (key64) {\r
- PrintAndLog("Found valid key:%012"llx, key64);\r
+ PrintAndLog("Found valid key:%012" PRIx64, key64);\r
e_sector[sectorNo].foundKey[trgKeyType] = 1;\r
e_sector[sectorNo].Key[trgKeyType] = key64;\r
}\r
PrintAndLog("|sec|key A |res|key B |res|");\r
PrintAndLog("|---|----------------|---|----------------|---|");\r
for (i = 0; i < SectorsCnt; i++) {\r
- PrintAndLog("|%03d| %012"llx" | %d | %012"llx" | %d |", i,\r
+ PrintAndLog("|%03d| %012" PRIx64 " | %d | %012" PRIx64 " | %d |", i,\r
e_sector[i].Key[0], e_sector[i].foundKey[0], e_sector[i].Key[1], e_sector[i].foundKey[1]);\r
}\r
PrintAndLog("|---|----------------|---|----------------|---|");\r
if (!p) {\r
PrintAndLog("Cannot allocate memory for defKeys");\r
free(keyBlock);\r
+ fclose(f);\r
return 2;\r
}\r
keyBlock = p;\r
}\r
memset(keyBlock + 6 * keycnt, 0, 6);\r
num_to_bytes(strtoll(buf, NULL, 16), 6, keyBlock + 6*keycnt);\r
- PrintAndLog("chk custom key[%2d] %012"llx, keycnt, bytes_to_num(keyBlock + 6*keycnt, 6));\r
+ PrintAndLog("chk custom key[%2d] %012" PRIx64 , keycnt, bytes_to_num(keyBlock + 6*keycnt, 6));\r
keycnt++;\r
memset(buf, 0, sizeof(buf));\r
}\r
res = mfCheckKeys(b, t, true, size, &keyBlock[6*c], &key64);\r
if (res != 1) {\r
if (!res) {\r
- PrintAndLog("Found valid key:[%012"llx"]",key64);\r
+ PrintAndLog("Found valid key:[%012" PRIx64 "]",key64);\r
num_to_bytes(key64, 6, foundKey[t][i]);\r
validKey[t][i] = true;\r
} \r
return 0;\r
}\r
\r
-int CmdHF14AMf1kSim(const char *Cmd)\r
-{\r
- uint8_t uid[7] = {0, 0, 0, 0, 0, 0, 0};\r
- uint8_t exitAfterNReads = 0;\r
- uint8_t flags = 0;\r
-\r
- uint8_t cmdp = param_getchar(Cmd, 0);\r
- \r
- if (cmdp == 'h' || cmdp == 'H') {\r
- PrintAndLog("Usage: hf mf sim u <uid (8 hex symbols)> n <numreads> i x");\r
- PrintAndLog(" h this help");\r
- PrintAndLog(" u (Optional) UID. If not specified, the UID from emulator memory will be used");\r
- PrintAndLog(" n (Optional) Automatically exit simulation after <numreads> blocks have been read by reader. 0 = infinite");\r
- PrintAndLog(" i (Optional) Interactive, means that console will not be returned until simulation finishes or is aborted");\r
- PrintAndLog(" x (Optional) Crack, performs the 'reader attack', nr/ar attack against a legitimate reader, fishes out the key(s)");\r
- PrintAndLog("");\r
- PrintAndLog(" sample: hf mf sim u 0a0a0a0a ");\r
- return 0;\r
- }\r
- uint8_t pnr = 0;\r
- if (param_getchar(Cmd, pnr) == 'u') {\r
- if(param_gethex(Cmd, pnr+1, uid, 8) == 0)\r
- {\r
- flags |= FLAG_4B_UID_IN_DATA; // UID from packet\r
- } else if(param_gethex(Cmd,pnr+1,uid,14) == 0) {\r
- flags |= FLAG_7B_UID_IN_DATA;// UID from packet\r
- } else {\r
- PrintAndLog("UID, if specified, must include 8 or 14 HEX symbols");\r
- return 1;\r
+void readerAttack(nonces_t ar_resp[], bool setEmulatorMem, bool doStandardAttack) {\r
+ #define ATTACK_KEY_COUNT 8 // keep same as define in iso14443a.c -> Mifare1ksim()\r
+ uint64_t key = 0;\r
+ typedef struct {\r
+ uint64_t keyA;\r
+ uint64_t keyB;\r
+ } st_t;\r
+ st_t sector_trailer[ATTACK_KEY_COUNT];\r
+ memset(sector_trailer, 0x00, sizeof(sector_trailer));\r
+\r
+ uint8_t stSector[ATTACK_KEY_COUNT];\r
+ memset(stSector, 0x00, sizeof(stSector));\r
+ uint8_t key_cnt[ATTACK_KEY_COUNT];\r
+ memset(key_cnt, 0x00, sizeof(key_cnt));\r
+\r
+ for (uint8_t i = 0; i<ATTACK_KEY_COUNT; i++) {\r
+ if (ar_resp[i].ar2 > 0) {\r
+ //PrintAndLog("DEBUG: Trying sector %d, cuid %08x, nt %08x, ar %08x, nr %08x, ar2 %08x, nr2 %08x",ar_resp[i].sector, ar_resp[i].cuid,ar_resp[i].nonce,ar_resp[i].ar,ar_resp[i].nr,ar_resp[i].ar2,ar_resp[i].nr2);\r
+ if (doStandardAttack && mfkey32(ar_resp[i], &key)) {\r
+ PrintAndLog(" Found Key%s for sector %02d: [%04x%08x]", (ar_resp[i].keytype) ? "B" : "A", ar_resp[i].sector, (uint32_t) (key>>32), (uint32_t) (key &0xFFFFFFFF));\r
+\r
+ for (uint8_t ii = 0; ii<ATTACK_KEY_COUNT; ii++) {\r
+ if (key_cnt[ii]==0 || stSector[ii]==ar_resp[i].sector) {\r
+ if (ar_resp[i].keytype==0) {\r
+ //keyA\r
+ sector_trailer[ii].keyA = key;\r
+ stSector[ii] = ar_resp[i].sector;\r
+ key_cnt[ii]++;\r
+ break;\r
+ } else {\r
+ //keyB\r
+ sector_trailer[ii].keyB = key;\r
+ stSector[ii] = ar_resp[i].sector;\r
+ key_cnt[ii]++;\r
+ break;\r
+ }\r
+ }\r
+ }\r
+ } else if (tryMfk32_moebius(ar_resp[i+ATTACK_KEY_COUNT], &key)) {\r
+ uint8_t sectorNum = ar_resp[i+ATTACK_KEY_COUNT].sector;\r
+ uint8_t keyType = ar_resp[i+ATTACK_KEY_COUNT].keytype;\r
+\r
+ PrintAndLog("M-Found Key%s for sector %02d: [%012" PRIx64 "]"\r
+ , keyType ? "B" : "A"\r
+ , sectorNum\r
+ , key\r
+ );\r
+\r
+ for (uint8_t ii = 0; ii<ATTACK_KEY_COUNT; ii++) {\r
+ if (key_cnt[ii]==0 || stSector[ii]==sectorNum) {\r
+ if (keyType==0) {\r
+ //keyA\r
+ sector_trailer[ii].keyA = key;\r
+ stSector[ii] = sectorNum;\r
+ key_cnt[ii]++;\r
+ break;\r
+ } else {\r
+ //keyB\r
+ sector_trailer[ii].keyB = key;\r
+ stSector[ii] = sectorNum;\r
+ key_cnt[ii]++;\r
+ break;\r
+ }\r
+ }\r
+ }\r
+ continue;\r
+ }\r
}\r
- pnr +=2;\r
- }\r
- if (param_getchar(Cmd, pnr) == 'n') {\r
- exitAfterNReads = param_get8(Cmd,pnr+1);\r
- pnr += 2;\r
}\r
- if (param_getchar(Cmd, pnr) == 'i' ) {\r
- //Using a flag to signal interactiveness, least significant bit\r
- flags |= FLAG_INTERACTIVE;\r
- pnr++;\r
+ //set emulator memory for keys\r
+ if (setEmulatorMem) {\r
+ for (uint8_t i = 0; i<ATTACK_KEY_COUNT; i++) {\r
+ if (key_cnt[i]>0) {\r
+ uint8_t memBlock[16];\r
+ memset(memBlock, 0x00, sizeof(memBlock));\r
+ char cmd1[36];\r
+ memset(cmd1,0x00,sizeof(cmd1));\r
+ snprintf(cmd1,sizeof(cmd1),"%04x%08xFF078069%04x%08x",(uint32_t) (sector_trailer[i].keyA>>32), (uint32_t) (sector_trailer[i].keyA &0xFFFFFFFF),(uint32_t) (sector_trailer[i].keyB>>32), (uint32_t) (sector_trailer[i].keyB &0xFFFFFFFF));\r
+ PrintAndLog("Setting Emulator Memory Block %02d: [%s]",stSector[i]*4+3, cmd1);\r
+ if (param_gethex(cmd1, 0, memBlock, 32)) {\r
+ PrintAndLog("block data must include 32 HEX symbols");\r
+ return;\r
+ }\r
+ \r
+ UsbCommand c = {CMD_MIFARE_EML_MEMSET, {(stSector[i]*4+3), 1, 0}};\r
+ memcpy(c.d.asBytes, memBlock, 16);\r
+ clearCommandBuffer();\r
+ SendCommand(&c); \r
+ }\r
+ }\r
}\r
+ /*\r
+ //un-comment to use as well moebius attack\r
+ for (uint8_t i = ATTACK_KEY_COUNT; i<ATTACK_KEY_COUNT*2; i++) {\r
+ if (ar_resp[i].ar2 > 0) {\r
+ if (tryMfk32_moebius(ar_resp[i], &key)) {\r
+ PrintAndLog("M-Found Key%s for sector %02d: [%04x%08x]", (ar_resp[i].keytype) ? "B" : "A", ar_resp[i].sector, (uint32_t) (key>>32), (uint32_t) (key &0xFFFFFFFF));\r
+ }\r
+ }\r
+ }*/\r
+}\r
\r
- if (param_getchar(Cmd, pnr) == 'x' ) {\r
- //Using a flag to signal interactiveness, least significant bit\r
- flags |= FLAG_NR_AR_ATTACK;\r
+int usage_hf14_mf1ksim(void) {\r
+ PrintAndLog("Usage: hf mf sim h u <uid (8, 14, or 20 hex symbols)> n <numreads> i x");\r
+ PrintAndLog("options:");\r
+ PrintAndLog(" h this help");\r
+ PrintAndLog(" u (Optional) UID 4,7 or 10 bytes. If not specified, the UID 4B from emulator memory will be used");\r
+ PrintAndLog(" n (Optional) Automatically exit simulation after <numreads> blocks have been read by reader. 0 = infinite");\r
+ PrintAndLog(" i (Optional) Interactive, means that console will not be returned until simulation finishes or is aborted");\r
+ PrintAndLog(" x (Optional) Crack, performs the 'reader attack', nr/ar attack against a legitimate reader, fishes out the key(s)");\r
+ PrintAndLog(" e (Optional) set keys found from 'reader attack' to emulator memory (implies x and i)");\r
+ PrintAndLog(" f (Optional) get UIDs to use for 'reader attack' from file 'f <filename.txt>' (implies x and i)");\r
+ PrintAndLog(" r (Optional) Generate random nonces instead of sequential nonces. Standard reader attack won't work with this option, only moebius attack works.");\r
+ PrintAndLog("samples:");\r
+ PrintAndLog(" hf mf sim u 0a0a0a0a");\r
+ PrintAndLog(" hf mf sim u 11223344556677");\r
+ PrintAndLog(" hf mf sim u 112233445566778899AA");\r
+ PrintAndLog(" hf mf sim f uids.txt");\r
+ PrintAndLog(" hf mf sim u 0a0a0a0a e");\r
+ \r
+ return 0;\r
+}\r
+\r
+int CmdHF14AMf1kSim(const char *Cmd) {\r
+ UsbCommand resp;\r
+ uint8_t uid[10] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0};\r
+ uint8_t exitAfterNReads = 0;\r
+ uint8_t flags = 0;\r
+ int uidlen = 0;\r
+ uint8_t pnr = 0;\r
+ bool setEmulatorMem = false;\r
+ bool attackFromFile = false;\r
+ FILE *f;\r
+ char filename[FILE_PATH_SIZE];\r
+ memset(filename, 0x00, sizeof(filename));\r
+ int len = 0;\r
+ char buf[64];\r
+\r
+ uint8_t cmdp = 0;\r
+ bool errors = false;\r
+\r
+ while(param_getchar(Cmd, cmdp) != 0x00) {\r
+ switch(param_getchar(Cmd, cmdp)) {\r
+ case 'e':\r
+ case 'E':\r
+ setEmulatorMem = true;\r
+ //implies x and i\r
+ flags |= FLAG_INTERACTIVE;\r
+ flags |= FLAG_NR_AR_ATTACK;\r
+ cmdp++;\r
+ break;\r
+ case 'f':\r
+ case 'F':\r
+ len = param_getstr(Cmd, cmdp+1, filename);\r
+ if (len < 1) {\r
+ PrintAndLog("error no filename found");\r
+ return 0;\r
+ }\r
+ attackFromFile = true;\r
+ //implies x and i\r
+ flags |= FLAG_INTERACTIVE;\r
+ flags |= FLAG_NR_AR_ATTACK;\r
+ cmdp += 2;\r
+ break;\r
+ case 'h':\r
+ case 'H':\r
+ return usage_hf14_mf1ksim();\r
+ case 'i':\r
+ case 'I':\r
+ flags |= FLAG_INTERACTIVE;\r
+ cmdp++;\r
+ break;\r
+ case 'n':\r
+ case 'N':\r
+ exitAfterNReads = param_get8(Cmd, pnr+1);\r
+ cmdp += 2;\r
+ break;\r
+ case 'r':\r
+ case 'R':\r
+ flags |= FLAG_RANDOM_NONCE;\r
+ cmdp++;\r
+ break;\r
+ case 'u':\r
+ case 'U':\r
+ param_gethex_ex(Cmd, cmdp+1, uid, &uidlen);\r
+ switch(uidlen) {\r
+ case 20: flags = FLAG_10B_UID_IN_DATA; break; //not complete\r
+ case 14: flags = FLAG_7B_UID_IN_DATA; break;\r
+ case 8: flags = FLAG_4B_UID_IN_DATA; break;\r
+ default: return usage_hf14_mf1ksim();\r
+ }\r
+ cmdp += 2;\r
+ break;\r
+ case 'x':\r
+ case 'X':\r
+ flags |= FLAG_NR_AR_ATTACK;\r
+ cmdp++;\r
+ break;\r
+ default:\r
+ PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));\r
+ errors = true;\r
+ break;\r
+ }\r
+ if(errors) break;\r
}\r
- PrintAndLog(" uid:%s, numreads:%d, flags:%d (0x%02x) ",\r
- flags & FLAG_4B_UID_IN_DATA ? sprint_hex(uid,4):\r
- flags & FLAG_7B_UID_IN_DATA ? sprint_hex(uid,7): "N/A"\r
- , exitAfterNReads, flags,flags);\r
+ //Validations\r
+ if(errors) return usage_hf14_mf1ksim();\r
\r
+ //get uid from file\r
+ if (attackFromFile) {\r
+ int count = 0;\r
+ // open file\r
+ f = fopen(filename, "r");\r
+ if (f == NULL) {\r
+ PrintAndLog("File %s not found or locked", filename);\r
+ return 1;\r
+ }\r
+ PrintAndLog("Loading file and simulating. Press keyboard to abort");\r
+ while(!feof(f) && !ukbhit()){\r
+ memset(buf, 0, sizeof(buf));\r
+ memset(uid, 0, sizeof(uid));\r
\r
- UsbCommand c = {CMD_SIMULATE_MIFARE_CARD, {flags, exitAfterNReads,0}};\r
- memcpy(c.d.asBytes, uid, sizeof(uid));\r
- SendCommand(&c);\r
+ if (fgets(buf, sizeof(buf), f) == NULL) { \r
+ if (count > 0) break;\r
+ \r
+ PrintAndLog("File reading error.");\r
+ fclose(f);\r
+ return 2;\r
+ }\r
+ if(!strlen(buf) && feof(f)) break;\r
+\r
+ uidlen = strlen(buf)-1;\r
+ switch(uidlen) {\r
+ case 20: flags |= FLAG_10B_UID_IN_DATA; break; //not complete\r
+ case 14: flags |= FLAG_7B_UID_IN_DATA; break;\r
+ case 8: flags |= FLAG_4B_UID_IN_DATA; break;\r
+ default: \r
+ PrintAndLog("uid in file wrong length at %d (length: %d) [%s]",count, uidlen, buf);\r
+ fclose(f);\r
+ return 2;\r
+ }\r
\r
- if(flags & FLAG_INTERACTIVE)\r
- {\r
- UsbCommand resp;\r
- PrintAndLog("Press pm3-button to abort simulation");\r
- while(! WaitForResponseTimeout(CMD_ACK,&resp,1500)) {\r
- //We're waiting only 1.5 s at a time, otherwise we get the\r
- // annoying message about "Waiting for a response... "\r
- }\r
- //got a response\r
- if (flags & FLAG_NR_AR_ATTACK) {\r
- typedef struct {\r
- uint32_t cuid;\r
- uint8_t sector;\r
- uint8_t keytype;\r
- uint32_t nonce;\r
- uint32_t ar;\r
- uint32_t nr;\r
- uint32_t nonce2;\r
- uint32_t ar2;\r
- uint32_t nr2;\r
- } nonces_t;\r
- nonces_t ar_resp[4];\r
- //uint32_t ar_responses[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};\r
- uint64_t key = 0;\r
- //uint64_t keyB = 0;\r
- //uint8_t arnr_len = 8;\r
- memcpy (ar_resp, resp.d.asBytes, sizeof(ar_resp));\r
+ for (uint8_t i = 0; i < uidlen; i += 2) {\r
+ sscanf(&buf[i], "%02x", (unsigned int *)&uid[i / 2]);\r
+ }\r
\r
- for (uint8_t i = 0; i<4; i++) {\r
- if (ar_resp[i].ar2 > 0) {\r
- key = mfkey32(ar_resp[i].cuid,ar_resp[i].nonce,ar_resp[i].ar,ar_resp[i].nr,ar_resp[i].ar2,ar_resp[i].nr2);\r
- if (key>0) {\r
- PrintAndLog("\nFound Key%s for sector %d: [%04x%08x]", (i<2) ? "A" : "B", ar_resp[i].sector, (uint32_t) (key>>32), (uint32_t) (key &0xFFFFFFFF));\r
- //set emulator memory for key\r
- } \r
- }\r
+ PrintAndLog("mf 1k sim uid: %s, numreads:%d, flags:%d (0x%02x) - press button to abort",\r
+ flags & FLAG_4B_UID_IN_DATA ? sprint_hex(uid,4):\r
+ flags & FLAG_7B_UID_IN_DATA ? sprint_hex(uid,7): \r
+ flags & FLAG_10B_UID_IN_DATA ? sprint_hex(uid,10): "N/A"\r
+ , exitAfterNReads, flags, flags);\r
+\r
+ UsbCommand c = {CMD_SIMULATE_MIFARE_CARD, {flags, exitAfterNReads,0}};\r
+ memcpy(c.d.asBytes, uid, sizeof(uid));\r
+ clearCommandBuffer();\r
+ SendCommand(&c);\r
+\r
+ while(! WaitForResponseTimeout(CMD_ACK,&resp,1500)) {\r
+ //We're waiting only 1.5 s at a time, otherwise we get the\r
+ // annoying message about "Waiting for a response... "\r
}\r
- /*\r
- if (ar_resp[1] && ar_responses[2] && ar_responses[3] && ar_responses[6] && ar_responses[7]) {\r
- keyA = mfkey32(ar_responses[0],ar_responses[1],ar_responses[2],ar_responses[3],ar_responses[6],ar_responses[7]);\r
- if (keyA>0) {\r
- PrintAndLog("\nFound KeyA: [%04x%08x]\n\n", (uint32_t) (keyA>>32), (uint32_t) (keyA &0xFFFFFFFF));\r
- //set emulator memory for key\r
- } else {\r
- keyA = mfkey32(ar_responses[0],ar_responses[1],ar_responses[2],ar_responses[3],ar_responses[6],ar_responses[7]); \r
- if (keyA>0) {\r
- PrintAndLog("\nFound KeyA: [%04x%08x]\n\n", (uint32_t) (keyA>>32), (uint32_t) (keyA &0xFFFFFFFF));\r
- //set emulator memory for key\r
- }\r
- }\r
- } else {\r
- PrintAndLog("keyA response error: %d %d %d %d %d",ar_responses[1] , ar_responses[2] , ar_responses[3] , ar_responses[6] , ar_responses[7]);\r
+ //got a response\r
+ nonces_t ar_resp[ATTACK_KEY_COUNT*2];\r
+ memcpy(ar_resp, resp.d.asBytes, sizeof(ar_resp));\r
+ // We can skip the standard attack if we have RANDOM_NONCE set.\r
+ readerAttack(ar_resp, setEmulatorMem, !(flags & FLAG_RANDOM_NONCE));\r
+ if ((bool)resp.arg[1]) {\r
+ PrintAndLog("Device button pressed - quitting");\r
+ fclose(f);\r
+ return 4;\r
}\r
- if (ar_responses[1] && ar_responses[2+arnr_len] && ar_responses[3+arnr_len] && ar_responses[6+arnr_len] && ar_responses[7+arnr_len]) {\r
- keyB = mfkey32(ar_responses[0],ar_responses[1],ar_responses[2+arnr_len],ar_responses[3+arnr_len],ar_responses[6+arnr_len],ar_responses[7+arnr_len]);\r
- if (keyB>0) {\r
- PrintAndLog("\nFound KeyB: [%04x%08x]\n\n", (uint32_t) (keyB>>32), (uint32_t) (keyB & 0xFFFFFFFF));\r
- //set emulator memory for key\r
- }\r
+ count++;\r
+ }\r
+ fclose(f);\r
+ } else { //not from file\r
+\r
+ PrintAndLog("mf 1k sim uid: %s, numreads:%d, flags:%d (0x%02x) ",\r
+ flags & FLAG_4B_UID_IN_DATA ? sprint_hex(uid,4):\r
+ flags & FLAG_7B_UID_IN_DATA ? sprint_hex(uid,7): \r
+ flags & FLAG_10B_UID_IN_DATA ? sprint_hex(uid,10): "N/A"\r
+ , exitAfterNReads, flags, flags);\r
+\r
+ UsbCommand c = {CMD_SIMULATE_MIFARE_CARD, {flags, exitAfterNReads,0}};\r
+ memcpy(c.d.asBytes, uid, sizeof(uid));\r
+ clearCommandBuffer();\r
+ SendCommand(&c);\r
+\r
+ if(flags & FLAG_INTERACTIVE) {\r
+ PrintAndLog("Press pm3-button to abort simulation");\r
+ while(! WaitForResponseTimeout(CMD_ACK,&resp,1500)) {\r
+ //We're waiting only 1.5 s at a time, otherwise we get the\r
+ // annoying message about "Waiting for a response... "\r
}\r
- if (keyA || keyB) {\r
- //TODO retry sim with new keys in emulator memory? (somehow flag to check that to see if new key has successful auth now?)\r
- // to validate key is correct\r
+ //got a response\r
+ if (flags & FLAG_NR_AR_ATTACK) {\r
+ nonces_t ar_resp[ATTACK_KEY_COUNT*2];\r
+ memcpy(ar_resp, resp.d.asBytes, sizeof(ar_resp));\r
+ // We can skip the standard attack if we have RANDOM_NONCE set.\r
+ readerAttack(ar_resp, setEmulatorMem, !(flags & FLAG_RANDOM_NONCE));\r
}\r
- */\r
}\r
}\r
- \r
+\r
return 0;\r
}\r
\r
\r
len = param_getstr(Cmd,nameParamNo,filename);\r
\r
- if (len > FILE_PATH_SIZE - 4) len = FILE_PATH_SIZE - 4;\r
+ if (len > FILE_PATH_SIZE - 5) len = FILE_PATH_SIZE - 5;\r
\r
fnameptr += len;\r
\r
\r
len = param_getstr(Cmd,nameParamNo,filename);\r
\r
- if (len > FILE_PATH_SIZE - 4) len = FILE_PATH_SIZE - 4;\r
+ if (len > FILE_PATH_SIZE - 5) len = FILE_PATH_SIZE - 5;\r
\r
// user supplied filename?\r
if (len < 1) {\r
}\r
keyA = bytes_to_num(data, 6);\r
keyB = bytes_to_num(data + 10, 6);\r
- PrintAndLog("|%03d| %012"llx" | %012"llx" |", i, keyA, keyB);\r
+ PrintAndLog("|%03d| %012" PRIx64 " | %012" PRIx64 " |", i, keyA, keyB);\r
}\r
PrintAndLog("|---|----------------|----------------|");\r
\r
{\r
uint8_t memBlock[16] = {0x00};\r
uint8_t blockNo = 0;\r
- bool wipeCard = FALSE;\r
+ bool wipeCard = false;\r
int res;\r
\r
if (strlen(Cmd) < 1 || param_getchar(Cmd, 0) == 'h') {\r
return 0;\r
} else {\r
len = strlen(Cmd);\r
- if (len > FILE_PATH_SIZE - 4) len = FILE_PATH_SIZE - 4;\r
+ if (len > FILE_PATH_SIZE - 5) len = FILE_PATH_SIZE - 5;\r
\r
memcpy(filename, Cmd, len);\r
fnameptr += len;\r
\r
if (mfCSetBlock(blockNum, buf8, NULL, 0, flags)) {\r
PrintAndLog("Can't set magic card block: %d", blockNum);\r
+ fclose(f);\r
return 3;\r
}\r
blockNum++;\r
return 0;\r
} else {\r
len = strlen(Cmd);\r
- if (len > FILE_PATH_SIZE - 4) len = FILE_PATH_SIZE - 4;\r
+ if (len > FILE_PATH_SIZE - 5) len = FILE_PATH_SIZE - 5;\r
\r
if (len < 1) {\r
// get filename\r
uint16_t traceLen = resp.arg[1];\r
len = resp.arg[2];\r
\r
- if (res == 0) return 0; // we are done\r
+ if (res == 0) { // we are done\r
+ free(buf);\r
+ return 0;\r
+ }\r
\r
if (res == 1) { // there is (more) data to be transferred\r
if (pckNum == 0) { // first packet, (re)allocate necessary buffer\r
- if (traceLen > bufsize) {\r
+ if (traceLen > bufsize || buf == NULL) {\r
uint8_t *p;\r
if (buf == NULL) { // not yet allocated\r
p = malloc(traceLen);\r
projects / proxmark3-svn / blobdiff