#define SEC_Y 0x00
#define SEC_Z 0xc0
-// SAME AS IN iso14443a.
-#define RECV_CMD_OFFSET 3032
-#define RECV_RES_OFFSET 3096
-#define DMA_BUFFER_OFFSET 3160
-#define DMA_BUFFER_SIZE 4096
-#define TRACE_LENGTH 3000
-
-uint32_t SwapBits(uint32_t value, int nrbits) {
- int i;
- uint32_t newvalue = 0;
- for(i = 0; i < nrbits; i++) {
- newvalue ^= ((value >> i) & 1) << (nrbits - 1 - i);
- }
- return newvalue;
-}
-
static int SendIClassAnswer(uint8_t *resp, int respLen, int delay);
//-----------------------------------------------------------------------------
// #define RECV_RES_OFFSET 3096
// #define DMA_BUFFER_OFFSET 3160
// #define DMA_BUFFER_SIZE 4096
-// #define TRACE_LENGTH 3000
+// #define TRACE_SIZE 3000
// We won't start recording the frames that we acquire until we trigger;
// a good trigger condition to get started is probably when we see a
// reset traceLen to 0
iso14a_set_tracing(TRUE);
- iso14a_clear_tracelen();
+ iso14a_clear_trace();
iso14a_set_trigger(FALSE);
// The DMA buffer, used to stream samples from the FPGA
trace[traceLen++] = Uart.byteCnt;
memcpy(trace+traceLen, receivedCmd, Uart.byteCnt);
traceLen += Uart.byteCnt;
- if(traceLen > TRACE_LENGTH) break;
+ if(traceLen > TRACE_SIZE) break;
//}
/* And ready to receive another command. */
Uart.state = STATE_UNSYNCD;
trace[traceLen++] = Demod.len;
memcpy(trace+traceLen, receivedResponse, Demod.len);
traceLen += Demod.len;
- if(traceLen > TRACE_LENGTH) break;
+ if(traceLen > TRACE_SIZE) break;
//triggered = TRUE;
{
uint8_t simType = arg0;
+ // Enable and clear the trace
+ tracing = TRUE;
+ traceLen = 0;
+ memset(trace, 0x44, TRACE_SIZE);
+
// CSN followed by two CRC bytes
uint8_t response2[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
uint8_t response3[] = { 0x03, 0x1f, 0xec, 0x8a, 0xf7, 0xff, 0x12, 0xe0, 0x00, 0x00 };
// Reader 81 anticoll. CSN
// Tag CSN
- uint8_t *resp;
- int respLen;
+ uint8_t *resp;
+ int respLen;
+ uint8_t* respdata = NULL;
+ int respsize = 0;
+ uint8_t sof = 0x0f;
// Respond SOF -- takes 8 bytes
- uint8_t *resp1 = (((uint8_t *)BigBuf) + 800);
+ uint8_t *resp1 = (((uint8_t *)BigBuf) + FREE_BUFFER_OFFSET);
int resp1Len;
// Anticollision CSN (rotated CSN)
// 176: Takes 16 bytes for SOF/EOF and 10 * 16 = 160 bytes (2 bytes/bit)
- uint8_t *resp2 = (((uint8_t *)BigBuf) + 810);
+ uint8_t *resp2 = (((uint8_t *)BigBuf) + FREE_BUFFER_OFFSET + 10);
int resp2Len;
// CSN
// 176: Takes 16 bytes for SOF/EOF and 10 * 16 = 160 bytes (2 bytes/bit)
- uint8_t *resp3 = (((uint8_t *)BigBuf) + 990);
+ uint8_t *resp3 = (((uint8_t *)BigBuf) + FREE_BUFFER_OFFSET + 190);
int resp3Len;
// e-Purse
// 144: Takes 16 bytes for SOF/EOF and 8 * 16 = 128 bytes (2 bytes/bit)
- uint8_t *resp4 = (((uint8_t *)BigBuf) + 1170);
+ uint8_t *resp4 = (((uint8_t *)BigBuf) + FREE_BUFFER_OFFSET + 370);
int resp4Len;
// + 1720..
- uint8_t *receivedCmd = (uint8_t *)BigBuf;
- memset(receivedCmd, 0x44, 400);
+ uint8_t *receivedCmd = (((uint8_t *)BigBuf) + RECV_CMD_OFFSET);
+ memset(receivedCmd, 0x44, RECV_CMD_SIZE);
int len;
// Prepare card messages
for(;;) {
LED_B_OFF();
if(!GetIClassCommandFromReader(receivedCmd, &len, 100)) {
- DbpString("button press");
+ DbpString("button press");
break;
- }
+ }
- // Okay, look at the command now.
- if(receivedCmd[0] == 0x0a) {
+ // Okay, look at the command now.
+ if(receivedCmd[0] == 0x0a) {
// Reader in anticollission phase
resp = resp1; respLen = resp1Len; //order = 1;
+ respdata = &sof;
+ respsize = sizeof(sof);
//resp = resp2; respLen = resp2Len; order = 2;
//DbpString("Hello request from reader:");
} else if(receivedCmd[0] == 0x0c) {
// Reader asks for anticollission CSN
resp = resp2; respLen = resp2Len; //order = 2;
+ respdata = response2;
+ respsize = sizeof(response2);
//DbpString("Reader requests anticollission CSN:");
} else if(receivedCmd[0] == 0x81) {
// Reader selects anticollission CSN.
// Tag sends the corresponding real CSN
resp = resp3; respLen = resp3Len; //order = 3;
+ respdata = response3;
+ respsize = sizeof(response3);
//DbpString("Reader selects anticollission CSN:");
} else if(receivedCmd[0] == 0x88) {
// Read e-purse (88 02)
resp = resp4; respLen = resp4Len; //order = 4;
+ respdata = response4;
+ respsize = sizeof(response4);
LED_B_ON();
} else if(receivedCmd[0] == 0x05) {
// Reader random and reader MAC!!!
// Lets store this ;-)
+/*
Dbprintf(" CSN: %02x %02x %02x %02x %02x %02x %02x %02x",
response3[0], response3[1], response3[2],
response3[3], response3[4], response3[5],
response3[6], response3[7]);
+*/
Dbprintf("READER AUTH (len=%02d): %02x %02x %02x %02x %02x %02x %02x %02x %02x",
len,
receivedCmd[0], receivedCmd[1], receivedCmd[2],
// Do not respond
// We do not know what to answer, so lets keep quit
resp = resp1; respLen = 0; //order = 5;
+ respdata = NULL;
+ respsize = 0;
} else if(receivedCmd[0] == 0x00 && len == 1) {
// Reader ends the session
resp = resp1; respLen = 0; //order = 0;
-/* } else if(receivedCmd[0] == 0x50) {
- // Received a HALT
- resp = resp1; respLen = 0; order = 5; // Do nothing
- DbpString("Reader requested we HALT!:");
-*/
- } else {
+ respdata = NULL;
+ respsize = 0;
+ } else {
// Never seen this command before
Dbprintf("Unknown command received from reader (len=%d): %x %x %x %x %x %x %x %x %x",
len,
receivedCmd[6], receivedCmd[7], receivedCmd[8]);
// Do not respond
resp = resp1; respLen = 0; //order = 0;
+ respdata = NULL;
+ respsize = 0;
}
- memset(receivedCmd, 0x44, 32);
-
if(cmdsRecvd > 999) {
DbpString("1000 commands later...");
break;
cmdsRecvd++;
}
- if(respLen <= 0) continue;
+ if(respLen > 0) {
+ SendIClassAnswer(resp, respLen, 21);
+ }
+
+ if (tracing) {
+ LogTrace(receivedCmd,len, 0, Uart.parityBits, TRUE);
+ if (respdata != NULL) {
+ LogTrace(respdata,respsize, 0, SwapBits(GetParity(respdata,respsize),respsize), FALSE);
+ }
+ if(traceLen > TRACE_SIZE) {
+ DbpString("Trace full");
+ break;
+ }
+ }
- SendIClassAnswer(resp, respLen, 21);
- }
+ memset(receivedCmd, 0x44, RECV_CMD_SIZE);
+ }
Dbprintf("%x", cmdsRecvd);
LED_A_OFF();
void ReaderIClass(uint8_t arg0) {
uint8_t act_all[] = { 0x0a };
uint8_t identify[] = { 0x0c };
- //uint8_t select[] = { 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+ uint8_t select[] = { 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
uint8_t* resp = (((uint8_t *)BigBuf) + 3560); // was 3560 - tied to other size changes
LED_A_ON();
for(;;) {
- if(traceLen > TRACE_LENGTH || BUTTON_PRESS()) break;
+
+ if(traceLen > TRACE_SIZE) {
+ DbpString("Trace full");
+ break;
+ }
+
+ if (BUTTON_PRESS()) break;
// Send act_all
ReaderTransmitIClass(act_all, 1);
// Card present?
if(ReaderReceiveIClass(resp)) {
ReaderTransmitIClass(identify, 1);
- if(ReaderReceiveIClass(resp)) {
- //ReaderTransmitIClass(select, sizeof(select));
+ if(ReaderReceiveIClass(resp) == 10) {
+ // Select card
+ memcpy(&select[1],resp,8);
+ ReaderTransmitIClass(select, sizeof(select));
+
+ if(ReaderReceiveIClass(resp) == 10) {
+ Dbprintf(" Selected CSN: %02x %02x %02x %02x %02x %02x %02x %02x",
+ resp[0], resp[1], resp[2],
+ resp[3], resp[4], resp[5],
+ resp[6], resp[7]);
+ }
+ // Card selected, whats next... ;-)
}
}
WDT_HIT();
}
LED_A_OFF();
-
-/* if(resp_data)
- memcpy(resp_data->atqa, resp, 2);
-
- // OK we will select at least at cascade 1, lets see if first byte of UID was 0x88 in
- // which case we need to make a cascade 2 request and select - this is a long UID
- // While the UID is not complete, the 3nd bit (from the right) is set in the SAK.
- for(; sak & 0x04; cascade_level++)
- {
- // SELECT_* (L1: 0x93, L2: 0x95, L3: 0x97)
- sel_uid[0] = sel_all[0] = 0x93 + cascade_level * 2;
-
- // SELECT_ALL
- ReaderTransmit(sel_all,sizeof(sel_all));
- if (!ReaderReceive(resp)) return 0;
- if(uid_ptr) memcpy(uid_ptr + cascade_level*4, resp, 4);
-
- // calculate crypto UID
- if(cuid_ptr) *cuid_ptr = bytes_to_num(resp, 4);
-
- // Construct SELECT UID command
- memcpy(sel_uid+2,resp,5);
- AppendCrc14443a(sel_uid,7);
- ReaderTransmit(sel_uid,sizeof(sel_uid));
-
- // Receive the SAK
- if (!ReaderReceive(resp)) return 0;
- sak = resp[0];
- }
- if(resp_data) {
- resp_data->sak = sak;
- resp_data->ats_len = 0;
- }
- //-- this byte not UID, it CT. http://www.nxp.com/documents/application_note/AN10927.pdf page 3
- if (uid_ptr[0] == 0x88) {
- memcpy(uid_ptr, uid_ptr + 1, 7);
- uid_ptr[7] = 0;
- }
-
- if( (sak & 0x20) == 0)
- return 2; // non iso14443a compliant tag
-
- // Request for answer to select
- if(resp_data) { // JCOP cards - if reader sent RATS then there is no MIFARE session at all!!!
- AppendCrc14443a(rats, 2);
- ReaderTransmit(rats, sizeof(rats));
-
- if (!(len = ReaderReceive(resp))) return 0;
-
- memcpy(resp_data->ats, resp, sizeof(resp_data->ats));
- resp_data->ats_len = len;
- }
-*/
}