// Proxmark3 RDV40 Smartcard module commands
//-----------------------------------------------------------------------------
#include "cmdsmartcard.h"
+
+#include <ctype.h>
+
+#include "ui.h"
+#include "cmdparser.h"
+#include "util.h"
#include "smartcard.h"
#include "comms.h"
#include "protocols.h"
+#include "cmdhf.h" // CmdHFlist
+#include "emv/apduinfo.h" // APDUcode description
+#include "emv/emvcore.h" // decodeTVL
static int CmdHelp(const char *Cmd);
-int usage_sm_raw(void) {
- PrintAndLog("Usage: sc raw [h|r|c] d <0A 0B 0C ... hex>");
- PrintAndLog(" h : this help");
- PrintAndLog(" r : do not read response");
- PrintAndLog(" a : active signal field ON without select");
- PrintAndLog(" s : active signal field ON with select");
- PrintAndLog(" t : executes TLV decoder if it is possible");
- PrintAndLog(" d <bytes> : bytes to send");
- PrintAndLog("");
- PrintAndLog("Examples:");
- PrintAndLog(" sc raw d 11223344");
+static int usage_sm_raw(void) {
+ PrintAndLogEx(NORMAL, "Usage: sc raw [h|r|c] d <0A 0B 0C ... hex>");
+ PrintAndLogEx(NORMAL, " h : this help");
+ PrintAndLogEx(NORMAL, " r : do not read response");
+ PrintAndLogEx(NORMAL, " a : active smartcard without select");
+ PrintAndLogEx(NORMAL, " s : active smartcard with select");
+ PrintAndLogEx(NORMAL, " t : executes TLV decoder if it possible");
+ PrintAndLogEx(NORMAL, " d <bytes> : bytes to send");
+ PrintAndLogEx(NORMAL, "");
+ PrintAndLogEx(NORMAL, "Examples:");
+ PrintAndLogEx(NORMAL, " sc raw d 00a404000e315041592e5359532e444446303100 - `1PAY.SYS.DDF01` PPSE directory");
+ PrintAndLogEx(NORMAL, " sc raw d 00a404000e325041592e5359532e444446303100 - `2PAY.SYS.DDF01` PPSE directory");
return 0;
}
-int usage_sm_reader(void) {
- PrintAndLog("Usage: sc reader [h|s]");
- PrintAndLog(" h : this help");
- PrintAndLog(" s : silent (no messages)");
- PrintAndLog("");
- PrintAndLog("Examples:");
- PrintAndLog(" sc reader");
+
+static int usage_sm_reader(void) {
+ PrintAndLogEx(NORMAL, "Usage: sc reader [h|s]");
+ PrintAndLogEx(NORMAL, " h : this help");
+ PrintAndLogEx(NORMAL, " s : silent (no messages)");
+ PrintAndLogEx(NORMAL, "");
+ PrintAndLogEx(NORMAL, "Examples:");
+ PrintAndLogEx(NORMAL, " sc reader");
return 0;
}
-int usage_sm_info(void) {
- PrintAndLog("Usage: sc info [h|s]");
- PrintAndLog(" h : this help");
- PrintAndLog(" s : silent (no messages)");
- PrintAndLog("");
- PrintAndLog("Examples:");
- PrintAndLog(" sc info");
+
+static int usage_sm_info(void) {
+ PrintAndLogEx(NORMAL, "Usage: s info [h|s]");
+ PrintAndLogEx(NORMAL, " h : this help");
+ PrintAndLogEx(NORMAL, " s : silent (no messages)");
+ PrintAndLogEx(NORMAL, "");
+ PrintAndLogEx(NORMAL, "Examples:");
+ PrintAndLogEx(NORMAL, " sc info");
return 0;
}
-int usage_sm_upgrade(void) {
- PrintAndLog("Upgrade firmware");
- PrintAndLog("Usage: sc upgrade f <file name>");
- PrintAndLog(" h : this help");
- PrintAndLog(" f <filename> : firmware file name");
- PrintAndLog("");
- PrintAndLog("Examples:");
- PrintAndLog(" sc upgrade f myfile");
- PrintAndLog("");
- PrintAndLog("WARNING - Dangerous command, do wrong and you will brick the smart card socket");
+
+static int usage_sm_upgrade(void) {
+ PrintAndLogEx(NORMAL, "Upgrade firmware");
+ PrintAndLogEx(NORMAL, "Usage: sc upgrade f <file name>");
+ PrintAndLogEx(NORMAL, " h : this help");
+ PrintAndLogEx(NORMAL, " f <filename> : firmware file name");
+ PrintAndLogEx(NORMAL, "");
+ PrintAndLogEx(NORMAL, "Examples:");
+ PrintAndLogEx(NORMAL, " sc upgrade f myfile");
return 0;
}
-int usage_sm_setclock(void) {
- PrintAndLog("Usage: sc setclock [h] c <clockspeed>");
- PrintAndLog(" h : this help");
- PrintAndLog(" c <> : clockspeed (0 = 16mhz, 1=8mhz, 2=4mhz) ");
- PrintAndLog("");
- PrintAndLog("Examples:");
- PrintAndLog(" sc setclock c 2");
+
+static int usage_sm_setclock(void) {
+ PrintAndLogEx(NORMAL, "Usage: sc setclock [h] c <clockspeed>");
+ PrintAndLogEx(NORMAL, " h : this help");
+ PrintAndLogEx(NORMAL, " c <> : clockspeed (0 = 16mhz, 1=8mhz, 2=4mhz) ");
+ PrintAndLogEx(NORMAL, "");
+ PrintAndLogEx(NORMAL, "Examples:");
+ PrintAndLogEx(NORMAL, " sc setclock c 2");
return 0;
}
+static int usage_sm_brute(void) {
+ PrintAndLogEx(NORMAL, "Tries to bruteforce SFI, ");
+ PrintAndLogEx(NORMAL, "Usage: sc brute [h]");
+ PrintAndLogEx(NORMAL, " h : this help");
+ PrintAndLogEx(NORMAL, "");
+ PrintAndLogEx(NORMAL, "Examples:");
+ PrintAndLogEx(NORMAL, " sc brute");
+ return 0;
+}
+
+static bool smart_select(bool silent) {
+ UsbCommand c = {CMD_SMART_ATR, {0, 0, 0}};
+ clearCommandBuffer();
+ SendCommand(&c);
+ UsbCommand resp;
+ if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2500) ) {
+ if (!silent) PrintAndLogEx(WARNING, "smart card select failed");
+ return false;
+ }
+
+ uint8_t isok = resp.arg[0] & 0xFF;
+ if (!isok) {
+ if (!silent) PrintAndLogEx(WARNING, "smart card select failed");
+ return false;
+ }
+
+ if (!silent) {
+ smart_card_atr_t card;
+ memcpy(&card, (smart_card_atr_t *)resp.d.asBytes, sizeof(smart_card_atr_t));
+
+ PrintAndLogEx(INFO, "ISO7816-3 ATR : %s", sprint_hex(card.atr, card.atr_len));
+ }
+
+ return true;
+}
+
+static int smart_wait(uint8_t *data) {
+ UsbCommand resp;
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 2500)) {
+ PrintAndLogEx(WARNING, "smart card response failed");
+ return -1;
+ }
+
+ uint32_t len = resp.arg[0];
+ if ( !len ) {
+ PrintAndLogEx(WARNING, "smart card response failed");
+ return -2;
+ }
+ memcpy(data, resp.d.asBytes, len);
+ PrintAndLogEx(SUCCESS, " %d | %s", len, sprint_hex_inrow_ex(data, len, 32));
+
+ if (len >= 2) {
+ PrintAndLogEx(SUCCESS, "%02X%02X | %s", data[len - 2], data[len - 1], GetAPDUCodeDescription(data[len - 2], data[len - 1]));
+ }
+ return len;
+}
+
+static int smart_response(uint8_t *data) {
+
+ int len = -1;
+ int datalen = smart_wait(data);
+
+ if ( data[datalen - 2] == 0x61 || data[datalen - 2] == 0x9F ) {
+ len = data[datalen - 1];
+ }
+
+ if (len == -1 ) {
+ goto out;
+ }
+
+ PrintAndLogEx(INFO, "Requesting response. len=0x%x", len);
+ uint8_t getstatus[] = {ISO7816_GETSTATUS, 0x00, 0x00, len};
+ UsbCommand cStatus = {CMD_SMART_RAW, {SC_RAW, sizeof(getstatus), 0}};
+ memcpy(cStatus.d.asBytes, getstatus, sizeof(getstatus) );
+ clearCommandBuffer();
+ SendCommand(&cStatus);
+
+ datalen = smart_wait(data);
+out:
+
+ return datalen;
+}
+
int CmdSmartRaw(const char *Cmd) {
int hexlen = 0;
case 'd': {
switch (param_gethex_to_eol(Cmd, cmdp+1, data, sizeof(data), &hexlen)) {
case 1:
- PrintAndLog("Invalid HEX value.");
+ PrintAndLogEx(WARNING, "Invalid HEX value.");
return 1;
case 2:
- PrintAndLog("Too many bytes. Max %d bytes", sizeof(data));
+ PrintAndLogEx(WARNING, "Too many bytes. Max %d bytes", sizeof(data));
return 1;
case 3:
- PrintAndLog("Hex must have an even number of digits.");
+ PrintAndLogEx(WARNING, "Hex must have even number of digits.");
return 1;
}
cmdp++;
break;
}
default:
- PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ PrintAndLogEx(WARNING, "Unknown parameter '%c'", param_getchar(Cmd, cmdp));
errors = true;
break;
}
UsbCommand c = {CMD_SMART_RAW, {0, hexlen, 0}};
if (active || active_select) {
- c.arg[0] |= SC_CONNECT;
- if (active)
- c.arg[0] |= SC_NO_SELECT;
- }
+ c.arg[0] |= SC_CONNECT;
+ if (active_select)
+ c.arg[0] |= SC_SELECT;
+ }
if (hexlen > 0) {
- c.arg[0] |= SC_RAW;
+ c.arg[0] |= SC_RAW;
}
memcpy(c.d.asBytes, data, hexlen );
// reading response from smart card
if ( reply ) {
- UsbCommand resp;
- if (!WaitForResponseTimeout(CMD_ACK, &resp, 2500)) {
- PrintAndLog("smart card response failed");
+
+ uint8_t* buf = calloc(USB_CMD_DATA_SIZE, sizeof(uint8_t));
+ if ( !buf )
return 1;
+
+ int len = smart_response(buf);
+ if ( len < 0 ) {
+ free(buf);
+ return 2;
}
- uint32_t datalen = resp.arg[0];
- if ( !datalen ) {
- PrintAndLog("smart card response failed");
- return 1;
+ if ( buf[0] == 0x6C ) {
+ data[4] = buf[1];
+
+ memcpy(c.d.asBytes, data, sizeof(data) );
+ clearCommandBuffer();
+ SendCommand(&c);
+ len = smart_response(buf);
+
+ data[4] = 0;
}
- PrintAndLog("received %i bytes", datalen);
+ if (decodeTLV && len > 4)
+ TLVPrintFromBuffer(buf+1, len-3);
- if (!datalen)
- return 1;
+ free(buf);
+ }
+ return 0;
+}
- uint8_t *data = resp.d.asBytes;
+int ExchangeAPDUSC(uint8_t *datain, int datainlen, bool activateCard, bool leaveSignalON, uint8_t *dataout, int maxdataoutlen, int *dataoutlen) {
+ *dataoutlen = 0;
- // TLV decoder
- if (decodeTLV ) {
+ if (activateCard)
+ smart_select(false);
+ printf("* APDU SC\n");
- if (datalen >= 2) {
- PrintAndLog("%02x %02x | %s", data[datalen - 2], data[datalen - 1], GetAPDUCodeDescription(data[datalen - 2], data[datalen - 1]));
- }
- if (datalen > 4) {
- TLVPrintFromBuffer(data, datalen - 2);
- }
- } else {
- PrintAndLog("%s", sprint_hex(data, datalen));
- }
+ UsbCommand c = {CMD_SMART_RAW, {SC_RAW | SC_CONNECT, datainlen, 0}};
+ if (activateCard) {
+ c.arg[0] |= SC_SELECT;
}
+ memcpy(c.d.asBytes, datain, datainlen);
+ clearCommandBuffer();
+ SendCommand(&c);
+
+ int len = smart_response(dataout);
+
+ if ( len < 0 ) {
+ return 2;
+ }
+
+ *dataoutlen = len;
+
return 0;
}
+
int CmdSmartUpgrade(const char *Cmd) {
- PrintAndLog("WARNING - Smartcard socket firmware upgrade.");
- PrintAndLog("Dangerous command, do wrong and you will brick the smart card socket");
+ PrintAndLogEx(WARNING, "WARNING - Smartcard socket firmware upgrade.");
+ PrintAndLogEx(WARNING, "A dangerous command, do wrong and you will brick the smart card socket");
FILE *f;
char filename[FILE_PATH_SIZE] = {0};
case 'f':
//File handling and reading
if ( param_getstr(Cmd, cmdp+1, filename, FILE_PATH_SIZE) >= FILE_PATH_SIZE ) {
- PrintAndLog("Filename too long");
+ PrintAndLogEx(FAILED, "Filename too long");
errors = true;
break;
}
case 'h':
return usage_sm_upgrade();
default:
- PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ PrintAndLogEx(WARNING, "Unknown parameter '%c'", param_getchar(Cmd, cmdp));
errors = true;
break;
}
// load file
f = fopen(filename, "rb");
- if ( !f ) {
- PrintAndLog("File: %s: not found or locked.", filename);
+ if ( !f ){
+ PrintAndLogEx(FAILED, "File: %s: not found or locked.", filename);
return 1;
}
long fsize = ftell(f);
fseek(f, 0, SEEK_SET);
- if (fsize < 0) {
- PrintAndLog("error, when getting filesize");
+ if (fsize < 0) {
+ PrintAndLogEx(WARNING, "error, when getting filesize");
fclose(f);
return 1;
}
-
+
uint8_t *dump = calloc(fsize, sizeof(uint8_t));
if (!dump) {
- PrintAndLog("error, cannot allocate memory ");
+ PrintAndLogEx(WARNING, "error, cannot allocate memory ");
fclose(f);
return 1;
}
if (f)
fclose(f);
- PrintAndLog("Smartcard socket firmware uploading to PM3");
+ PrintAndLogEx(SUCCESS, "Smartcard socket firmware uploading to PM3");
//Send to device
uint32_t index = 0;
uint32_t bytes_sent = 0;
clearCommandBuffer();
SendCommand(&c);
if ( !WaitForResponseTimeout(CMD_ACK, NULL, 2000) ) {
- PrintAndLog("timeout while waiting for reply.");
+ PrintAndLogEx(WARNING, "timeout while waiting for reply.");
free(dump);
return 1;
}
}
free(dump);
printf("\n");
- PrintAndLog("Smartcard socket firmware updating, don\'t turn off your PM3!");
+ PrintAndLogEx(SUCCESS, "Smartcard socket firmware updating, don\'t turn off your PM3!");
// trigger the firmware upgrade
UsbCommand c = {CMD_SMART_UPGRADE, {bytes_read, 0, 0}};
SendCommand(&c);
UsbCommand resp;
if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2500) ) {
- PrintAndLog("timeout while waiting for reply.");
+ PrintAndLogEx(WARNING, "timeout while waiting for reply.");
return 1;
}
- if ( (resp.arg[0] && 0xFF ) )
- PrintAndLog("Smartcard socket firmware upgraded successful");
+ if ( (resp.arg[0] & 0xFF ) )
+ PrintAndLogEx(SUCCESS, "Smartcard socket firmware upgraded successful");
else
- PrintAndLog("Smartcard socket firmware updating failed");
+ PrintAndLogEx(FAILED, "Smartcard socket firmware updating failed");
return 0;
}
while (param_getchar(Cmd, cmdp) != 0x00 && !errors) {
switch (tolower(param_getchar(Cmd, cmdp))) {
case 'h': return usage_sm_info();
- case 's':
+ case 's':
silent = true;
break;
default:
- PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ PrintAndLogEx(WARNING, "Unknown parameter '%c'", param_getchar(Cmd, cmdp));
errors = true;
break;
}
SendCommand(&c);
UsbCommand resp;
if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2500) ) {
- if (!silent) PrintAndLog("smart card select failed");
+ if (!silent) PrintAndLogEx(WARNING, "smart card select failed");
return 1;
}
uint8_t isok = resp.arg[0] & 0xFF;
if (!isok) {
- if (!silent) PrintAndLog("smart card select failed");
+ if (!silent) PrintAndLogEx(WARNING, "smart card select failed");
return 1;
}
memcpy(&card, (smart_card_atr_t *)resp.d.asBytes, sizeof(smart_card_atr_t));
// print header
- PrintAndLog("\n--- Smartcard Information ---------");
- PrintAndLog("-------------------------------------------------------------");
- PrintAndLog("ISO76183 ATR : %s", sprint_hex(card.atr, card.atr_len));
- PrintAndLog("look up ATR");
- PrintAndLog("http://smartcard-atr.appspot.com/parse?ATR=%s", sprint_hex_inrow(card.atr, card.atr_len) );
+ PrintAndLogEx(INFO, "\n--- Smartcard Information ---------");
+ PrintAndLogEx(INFO, "-------------------------------------------------------------");
+ PrintAndLogEx(INFO, "ISO76183 ATR : %s", sprint_hex(card.atr, card.atr_len));
+ PrintAndLogEx(INFO, "look up ATR");
+ PrintAndLogEx(INFO, "http://smartcard-atr.appspot.com/parse?ATR=%s", sprint_hex_inrow(card.atr, card.atr_len) );
return 0;
}
while (param_getchar(Cmd, cmdp) != 0x00 && !errors) {
switch (tolower(param_getchar(Cmd, cmdp))) {
case 'h': return usage_sm_reader();
- case 's':
+ case 's':
silent = true;
break;
default:
- PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ PrintAndLogEx(WARNING, "Unknown parameter '%c'", param_getchar(Cmd, cmdp));
errors = true;
break;
}
SendCommand(&c);
UsbCommand resp;
if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2500) ) {
- if (!silent) PrintAndLog("smart card select failed");
+ if (!silent) PrintAndLogEx(WARNING, "smart card select failed");
return 1;
}
uint8_t isok = resp.arg[0] & 0xFF;
if (!isok) {
- if (!silent) PrintAndLog("smart card select failed");
+ if (!silent) PrintAndLogEx(WARNING, "smart card select failed");
return 1;
}
smart_card_atr_t card;
memcpy(&card, (smart_card_atr_t *)resp.d.asBytes, sizeof(smart_card_atr_t));
- PrintAndLog("ISO7816-3 ATR : %s", sprint_hex(card.atr, card.atr_len));
+
+ PrintAndLogEx(INFO, "ISO7816-3 ATR : %s", sprint_hex(card.atr, card.atr_len));
return 0;
}
while (param_getchar(Cmd, cmdp) != 0x00 && !errors) {
switch (tolower(param_getchar(Cmd, cmdp))) {
case 'h': return usage_sm_setclock();
- case 'c':
+ case 'c':
clock = param_get8ex(Cmd, cmdp+1, 2, 10);
if ( clock > 2)
errors = true;
-
+
cmdp += 2;
break;
default:
- PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ PrintAndLogEx(WARNING, "Unknown parameter '%c'", param_getchar(Cmd, cmdp));
errors = true;
break;
}
SendCommand(&c);
UsbCommand resp;
if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2500) ) {
- PrintAndLog("smart card select failed");
+ PrintAndLogEx(WARNING, "smart card select failed");
return 1;
}
uint8_t isok = resp.arg[0] & 0xFF;
if (!isok) {
- PrintAndLog("smart card set clock failed");
+ PrintAndLogEx(WARNING, "smart card set clock failed");
return 1;
}
switch (clock) {
case 0:
- PrintAndLog("Clock changed to 16mhz giving 10800 baudrate");
+ PrintAndLogEx(SUCCESS, "Clock changed to 16mhz giving 10800 baudrate");
break;
case 1:
- PrintAndLog("Clock changed to 8mhz giving 21600 baudrate");
+ PrintAndLogEx(SUCCESS, "Clock changed to 8mhz giving 21600 baudrate");
break;
case 2:
- PrintAndLog("Clock changed to 4mhz giving 86400 baudrate");
+ PrintAndLogEx(SUCCESS, "Clock changed to 4mhz giving 86400 baudrate");
break;
default:
break;
return 0;
}
-
-// iso 7816-3
-void annotateIso7816(char *exp, size_t size, uint8_t* cmd, uint8_t cmdsize){
- // S-block
- if ( (cmd[0] & 0xC0) && (cmdsize == 3) ) {
- switch ( (cmd[0] & 0x3f) ) {
- case 0x00 : snprintf(exp, size, "S-block RESYNCH req"); break;
- case 0x20 : snprintf(exp, size, "S-block RESYNCH resp"); break;
- case 0x01 : snprintf(exp, size, "S-block IFS req"); break;
- case 0x21 : snprintf(exp, size, "S-block IFS resp"); break;
- case 0x02 : snprintf(exp, size, "S-block ABORT req"); break;
- case 0x22 : snprintf(exp, size, "S-block ABORT resp"); break;
- case 0x03 : snprintf(exp, size, "S-block WTX reqt"); break;
- case 0x23 : snprintf(exp, size, "S-block WTX resp"); break;
- default : snprintf(exp, size, "S-block"); break;
- }
- }
- // R-block (ack)
- else if ( ((cmd[0] & 0xD0) == 0x80) && ( cmdsize > 2) ) {
- if ( (cmd[0] & 0x10) == 0 )
- snprintf(exp, size, "R-block ACK");
- else
- snprintf(exp, size, "R-block NACK");
- }
- // I-block
- else {
-
- int pos = (cmd[0] == 2 || cmd[0] == 3) ? 2 : 3;
- switch ( cmd[pos] ) {
- case ISO7816_READ_BINARY :snprintf(exp, size, "READ BIN");break;
- case ISO7816_WRITE_BINARY :snprintf(exp, size, "WRITE BIN");break;
- case ISO7816_UPDATE_BINARY :snprintf(exp, size, "UPDATE BIN");break;
- case ISO7816_ERASE_BINARY :snprintf(exp, size, "ERASE BIN");break;
- case ISO7816_READ_RECORDS :snprintf(exp, size, "READ RECORDS");break;
- case ISO7816_WRITE_RECORDS :snprintf(exp, size, "WRITE RECORDS");break;
- case ISO7816_APPEND_RECORD :snprintf(exp, size, "APPEND RECORD");break;
- case ISO7816_UPDATE_RECORD :snprintf(exp, size, "UPDATE RECORD");break;
- case ISO7816_GET_DATA :snprintf(exp, size, "GET DATA");break;
- case ISO7816_PUT_DATA :snprintf(exp, size, "PUT DATA");break;
- case ISO7816_SELECT_FILE :snprintf(exp, size, "SELECT FILE");break;
- case ISO7816_VERIFY :snprintf(exp, size, "VERIFY");break;
- case ISO7816_INTERNAL_AUTHENTICATION :snprintf(exp, size, "INTERNAL AUTH");break;
- case ISO7816_EXTERNAL_AUTHENTICATION :snprintf(exp, size, "EXTERNAL AUTH");break;
- case ISO7816_GET_CHALLENGE :snprintf(exp, size, "GET CHALLENGE");break;
- case ISO7816_MANAGE_CHANNEL :snprintf(exp, size, "MANAGE CHANNEL");break;
- default :snprintf(exp, size, "?"); break;
- }
- }
+int CmdSmartList(const char *Cmd) {
+ CmdHFList("7816");
+ return 0;
}
+int CmdSmartBruteforceSFI(const char *Cmd) {
-uint16_t printScTraceLine(uint16_t tracepos, uint16_t traceLen, uint8_t *trace) {
- // sanity check
- if (tracepos + sizeof(uint32_t) + sizeof(uint16_t) + sizeof(uint16_t) > traceLen) return traceLen;
-
- bool isResponse;
- uint16_t data_len, parity_len;
- uint32_t duration, timestamp, first_timestamp, EndOfTransmissionTimestamp;
- char explanation[30] = {0};
-
- first_timestamp = *((uint32_t *)(trace));
- timestamp = *((uint32_t *)(trace + tracepos));
- tracepos += 4;
-
- duration = *((uint16_t *)(trace + tracepos));
- tracepos += 2;
-
- data_len = *((uint16_t *)(trace + tracepos));
- tracepos += 2;
-
- if (data_len & 0x8000) {
- data_len &= 0x7fff;
- isResponse = true;
- } else {
- isResponse = false;
- }
-
- parity_len = (data_len-1)/8 + 1;
- if (tracepos + data_len + parity_len > traceLen) {
- return traceLen;
- }
- uint8_t *frame = trace + tracepos;
- tracepos += data_len;
- //uint8_t *parityBytes = trace + tracepos;
- tracepos += parity_len;
-
- //--- Draw the data column
- char line[18][110];
+ char ctmp = tolower(param_getchar(Cmd, 0));
+ if (ctmp == 'h') return usage_sm_brute();
- if (data_len == 0 ) {
- sprintf(line[0],"<empty trace - possible error>");
- return tracepos;
- }
+ uint8_t data[5] = {0x00, 0xB2, 0x00, 0x00, 0x00};
- for (int j = 0; j < data_len && j/18 < 18; j++) {
- snprintf(line[j/18]+(( j % 18) * 4),110, "%02x ", frame[j]);
+ PrintAndLogEx(INFO, "Selecting card");
+ if ( !smart_select(false) ) {
+ return 1;
}
- EndOfTransmissionTimestamp = timestamp + duration;
-
- annotateIso7816(explanation,sizeof(explanation),frame,data_len);
-
- int num_lines = MIN((data_len - 1)/18 + 1, 18);
- for (int j = 0; j < num_lines ; j++) {
- if (j == 0) {
- PrintAndLog(" %10u | %10u | %s |%-72s | %s| %s",
- (timestamp - first_timestamp),
- (EndOfTransmissionTimestamp - first_timestamp),
- (isResponse ? "Tag" : "Rdr"),
- line[j],
- " ",
- (j == num_lines-1) ? explanation : "");
- } else {
- PrintAndLog(" | | |%-72s | %s| %s",
- line[j],
- " ",
- (j == num_lines-1) ? explanation : "");
- }
- }
+ PrintAndLogEx(INFO, "Selecting PPSE aid");
+ CmdSmartRaw("d 00a404000e325041592e5359532e444446303100");
+ CmdSmartRaw("d 00a4040007a000000004101000");
- // if is last record
- if (tracepos + sizeof(uint32_t) + sizeof(uint16_t) + sizeof(uint16_t) >= traceLen) return traceLen;
+ PrintAndLogEx(INFO, "starting");
- return tracepos;
-}
+ UsbCommand c = {CMD_SMART_RAW, {SC_RAW, sizeof(data), 0}};
+ uint8_t* buf = malloc(USB_CMD_DATA_SIZE);
+ if ( !buf )
+ return 1;
-int ScTraceList(const char *Cmd) {
- bool loadFromFile = false;
- bool saveToFile = false;
- char type[5] = {0};
- char filename[FILE_PATH_SIZE] = {0};
+ for (uint8_t i=1; i < 4; i++) {
+ for (int p1=1; p1 < 5; p1++) {
- // parse command line
- param_getstr(Cmd, 0, type, sizeof(type));
- param_getstr(Cmd, 1, filename, sizeof(filename));
+ data[2] = p1;
+ data[3] = (i << 3) + 4;
- bool errors = false;
- if(type[0] == 'h') {
- errors = true;
- }
+ memcpy(c.d.asBytes, data, sizeof(data) );
+ clearCommandBuffer();
+ SendCommand(&c);
- if(!errors) {
- if (strcmp(type, "s") == 0) {
- saveToFile = true;
- } else if (strcmp(type,"l") == 0) {
- loadFromFile = true;
- }
- }
+ smart_response(buf);
- if ((loadFromFile || saveToFile) && strlen(filename) == 0) {
- errors = true;
- }
+ // if 0x6C
+ if ( buf[0] == 0x6C ) {
+ data[4] = buf[1];
- if (loadFromFile && saveToFile) {
- errors = true;
- }
+ memcpy(c.d.asBytes, data, sizeof(data) );
+ clearCommandBuffer();
+ SendCommand(&c);
+ uint8_t len = smart_response(buf);
- if (errors) {
- PrintAndLog("List or save protocol data.");
- PrintAndLog("Usage: sc list [l <filename>]");
- PrintAndLog(" sc list [s <filename>]");
- PrintAndLog(" l - load data from file instead of trace buffer");
- PrintAndLog(" s - save data to file");
- PrintAndLog("");
- PrintAndLog("example: sc list");
- PrintAndLog("example: sc list save myCardTrace.trc");
- PrintAndLog("example: sc list l myCardTrace.trc");
- return 0;
- }
+ // TLV decoder
+ if (len > 4)
+ TLVPrintFromBuffer(buf+1, len-3);
- uint8_t *trace;
- uint32_t tracepos = 0;
- uint32_t traceLen = 0;
-
- if (loadFromFile) {
- #define TRACE_CHUNK_SIZE (1<<16) // 64K to start with. Will be enough for BigBuf and some room for future extensions
- FILE *tracefile = NULL;
- size_t bytes_read;
- trace = malloc(TRACE_CHUNK_SIZE);
- if (trace == NULL) {
- PrintAndLog("Cannot allocate memory for trace");
- return 2;
- }
- if ((tracefile = fopen(filename,"rb")) == NULL) {
- PrintAndLog("Could not open file %s", filename);
- free(trace);
- return 0;
- }
- while (!feof(tracefile)) {
- bytes_read = fread(trace+traceLen, 1, TRACE_CHUNK_SIZE, tracefile);
- traceLen += bytes_read;
- if (!feof(tracefile)) {
- uint8_t *p = realloc(trace, traceLen + TRACE_CHUNK_SIZE);
- if (p == NULL) {
- PrintAndLog("Cannot allocate memory for trace");
- free(trace);
- fclose(tracefile);
- return 2;
- }
- trace = p;
- }
- }
- fclose(tracefile);
- } else {
- trace = malloc(USB_CMD_DATA_SIZE);
- // Query for the size of the trace
- UsbCommand response;
- GetFromBigBuf(trace, USB_CMD_DATA_SIZE, 0, &response, -1, false);
- traceLen = response.arg[2];
- if (traceLen > USB_CMD_DATA_SIZE) {
- uint8_t *p = realloc(trace, traceLen);
- if (p == NULL) {
- PrintAndLog("Cannot allocate memory for trace");
- free(trace);
- return 2;
+ data[4] = 0;
}
- trace = p;
- GetFromBigBuf(trace, traceLen, 0, NULL, -1, false);
- }
- }
-
- if (saveToFile) {
- FILE *tracefile = NULL;
- if ((tracefile = fopen(filename,"wb")) == NULL) {
- PrintAndLog("Could not create file %s", filename);
- return 1;
- }
- fwrite(trace, 1, traceLen, tracefile);
- PrintAndLog("Recorded Activity (TraceLen = %d bytes) written to file %s", traceLen, filename);
- fclose(tracefile);
- } else {
- PrintAndLog("Recorded Activity (TraceLen = %d bytes)", traceLen);
- PrintAndLog("");
- PrintAndLog("Start = Start of Start Bit, End = End of last modulation. Src = Source of Transfer");
- PrintAndLog("");
- PrintAndLog(" Start | End | Src | Data (! denotes parity error) | CRC | Annotation |");
- PrintAndLog("------------|------------|-----|-------------------------------------------------------------------------|-----|--------------------|");
-
- while(tracepos < traceLen)
- {
- tracepos = printScTraceLine(tracepos, traceLen, trace);
+ memset(buf, 0x00, USB_CMD_DATA_SIZE);
}
}
-
- free(trace);
- return 0;
-}
-
-int CmdSmartList(const char *Cmd) {
- ScTraceList(Cmd);
+ free(buf);
return 0;
}
static command_t CommandTable[] = {
- {"help", CmdHelp, 1, "This help"},
- {"list", CmdSmartList, 0, "List ISO 7816 history"},
- {"info", CmdSmartInfo, 1, "Tag information [rdv40]"},
- {"reader", CmdSmartReader, 1, "Act like an IS07816 reader [rdv40]"},
- {"raw", CmdSmartRaw, 1, "Send raw hex data to tag [rdv40]"},
- {"upgrade", CmdSmartUpgrade, 1, "Upgrade firmware [rdv40]"},
- {"setclock",CmdSmartSetClock, 1, "Set clock speed"},
+ {"help", CmdHelp, 1, "This help"},
+ {"list", CmdSmartList, 0, "List ISO 7816 history"},
+ {"info", CmdSmartInfo, 1, "Tag information"},
+ {"reader", CmdSmartReader, 1, "Act like an IS07816 reader"},
+ {"raw", CmdSmartRaw, 1, "Send raw hex data to tag"},
+ {"upgrade", CmdSmartUpgrade, 1, "Upgrade firmware"},
+ {"setclock", CmdSmartSetClock, 1, "Set clock speed"},
+ {"brute", CmdSmartBruteforceSFI, 1, "Bruteforce SFI"},
{NULL, NULL, 0, NULL}
};
projects / proxmark3-svn / blobdiff