int i;
uint32_t dwPar = 0;
- // Generate the encrypted data
+ // Generate the parity bits
for (i = 0; i < iLen; i++) {
- // Save the encrypted parity bit
+ // and save them to a 32Bit word
dwPar |= ((OddByteParity[pbtCmd[i]]) << i);
}
return dwPar;
}
//=============================================================================
-// ISO 14443 Type A - Manchester
+// ISO 14443 Type A - Manchester decoder
//=============================================================================
+// Basics:
+// The tag will modulate the reader field by asserting different loads to it. As a consequence, the voltage
+// at the reader antenna will be modulated as well. The FPGA detects the modulation for us and would deliver e.g. the following:
+// ........ 0 0 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 .......
+// The Manchester decoder needs to identify the following sequences:
+// 4 ticks modulated followed by 4 ticks unmodulated: Sequence D = 1 (also used as "start of communication")
+// 4 ticks unmodulated followed by 4 ticks modulated: Sequence E = 0
+// 8 ticks unmodulated: Sequence F = end of communication
+// 8 ticks modulated: A collision. Save the collision position and treat as Sequence D
+// Note 1: the bitstream may start at any time (either in first or second nibble within the parameter bit). We therefore need to sync.
+// Note 2: parameter offset is used to determine the position of the parity bits (required for the anticollision command only)
static tDemod Demod;
-static RAMFUNC int ManchesterDecoding(int v)
+inline RAMFUNC bool IsModulation(byte_t b)
{
- int bit;
- int modulation;
- //int error = 0;
-
- if(!Demod.buff) {
- Demod.buff = 1;
- Demod.buffer = v;
- return FALSE;
- }
- else {
- bit = Demod.buffer;
- Demod.buffer = v;
- }
+ if (b >= 5 || b == 3) // majority decision: 2 or more bits are set
+ return true;
+ else
+ return false;
+
+}
- if(Demod.state==DEMOD_UNSYNCD) {
- Demod.output[Demod.len] = 0xfa;
- Demod.syncBit = 0;
- //Demod.samples = 0;
- Demod.posCount = 1; // This is the first half bit period, so after syncing handle the second part
+inline RAMFUNC bool IsModulationNibble1(byte_t b)
+{
+ return IsModulation((b & 0xE0) >> 5);
+}
- if(bit & 0x08) {
- Demod.syncBit = 0x08;
- }
+inline RAMFUNC bool IsModulationNibble2(byte_t b)
+{
+ return IsModulation((b & 0x0E) >> 1);
+}
- if(bit & 0x04) {
- if(Demod.syncBit) {
- bit <<= 4;
+static RAMFUNC int ManchesterDecoding(int bit, uint16_t offset)
+{
+
+ switch (Demod.state) {
+
+ case DEMOD_UNSYNCD: // not yet synced
+ Demod.len = 0; // initialize number of decoded data bytes
+ Demod.bitCount = offset; // initialize number of decoded data bits
+ Demod.shiftReg = 0; // initialize shiftreg to hold decoded data bits
+ Demod.parityBits = 0; // initialize parity bits
+ Demod.collisionPos = 0; // Position of collision bit
+
+ if (IsModulationNibble1(bit)
+ && !IsModulationNibble2(bit)) { // this is the start bit
+ Demod.samples = 8;
+ if(trigger) LED_A_OFF();
+ Demod.state = DEMOD_MANCHESTER_DATA;
+ } else if (!IsModulationNibble1(bit) && IsModulationNibble2(bit)) { // this may be the first half of the start bit
+ Demod.samples = 4;
+ Demod.state = DEMOD_HALF_SYNCD;
}
- Demod.syncBit = 0x04;
- }
+ break;
- if(bit & 0x02) {
- if(Demod.syncBit) {
- bit <<= 2;
- }
- Demod.syncBit = 0x02;
- }
- if(bit & 0x01 && Demod.syncBit) {
- Demod.syncBit = 0x01;
- }
-
- if(Demod.syncBit) {
- Demod.len = 0;
- Demod.state = DEMOD_START_OF_COMMUNICATION;
- Demod.sub = SUB_FIRST_HALF;
- Demod.bitCount = 0;
- Demod.shiftReg = 0;
- Demod.parityBits = 0;
- Demod.samples = 0;
- if(Demod.posCount) {
- if(trigger) LED_A_OFF();
- switch(Demod.syncBit) {
- case 0x08: Demod.samples = 3; break;
- case 0x04: Demod.samples = 2; break;
- case 0x02: Demod.samples = 1; break;
- case 0x01: Demod.samples = 0; break;
+ case DEMOD_HALF_SYNCD:
+ Demod.samples += 8;
+ if (IsModulationNibble1(bit)) { // error: this was not a start bit.
+ Demod.state = DEMOD_UNSYNCD;
+ } else {
+ if (IsModulationNibble2(bit)) { // modulation in first half
+ Demod.state = DEMOD_MOD_FIRST_HALF;
+ } else { // no modulation in first half
+ Demod.state = DEMOD_NOMOD_FIRST_HALF;
}
}
- //error = 0;
- }
- }
- else {
- //modulation = bit & Demod.syncBit;
- modulation = ((bit << 1) ^ ((Demod.buffer & 0x08) >> 3)) & Demod.syncBit;
-
- Demod.samples += 4;
-
- if(Demod.posCount==0) {
- Demod.posCount = 1;
- if(modulation) {
- Demod.sub = SUB_FIRST_HALF;
+ break;
+
+
+ case DEMOD_MOD_FIRST_HALF:
+ Demod.samples += 8;
+ Demod.bitCount++;
+ if (IsModulationNibble1(bit)) { // modulation in both halfs - collision
+ if (!Demod.collisionPos) {
+ Demod.collisionPos = (Demod.len << 3) + Demod.bitCount;
+ }
+ } // modulation in first half only - Sequence D = 1
+ Demod.shiftReg = (Demod.shiftReg >> 1) | 0x100; // add a 1 to the shiftreg
+ if(Demod.bitCount >= 9) { // if we decoded a full byte (including parity)
+ Demod.parityBits <<= 1; // make room for the parity bit
+ Demod.output[Demod.len++] = (Demod.shiftReg & 0xff);
+ Demod.parityBits |= ((Demod.shiftReg >> 8) & 0x01); // store parity bit
+ Demod.bitCount = 0;
+ Demod.shiftReg = 0;
}
- else {
- Demod.sub = SUB_NONE;
+ if (IsModulationNibble2(bit)) { // modulation in first half
+ Demod.state = DEMOD_MOD_FIRST_HALF;
+ } else { // no modulation in first half
+ Demod.state = DEMOD_NOMOD_FIRST_HALF;
}
- }
- else {
- Demod.posCount = 0;
- if(modulation && (Demod.sub == SUB_FIRST_HALF)) {
- if(Demod.state!=DEMOD_ERROR_WAIT) {
- Demod.state = DEMOD_ERROR_WAIT;
- Demod.output[Demod.len] = 0xaa;
- //error = 0x01;
+ break;
+
+
+ case DEMOD_NOMOD_FIRST_HALF:
+ if (IsModulationNibble1(bit)) { // modulation in second half only - Sequence E = 0
+ Demod.bitCount++;
+ Demod.samples += 8;
+ Demod.shiftReg = (Demod.shiftReg >> 1); // add a 0 to the shiftreg
+ if(Demod.bitCount >= 9) { // if we decoded a full byte (including parity)
+ Demod.parityBits <<= 1; // make room for the new parity bit
+ Demod.output[Demod.len++] = (Demod.shiftReg & 0xff);
+ Demod.parityBits |= ((Demod.shiftReg >> 8) & 0x01); // store parity bit
+ Demod.bitCount = 0;
+ Demod.shiftReg = 0;
+ }
+ } else { // no modulation in both halves - End of communication
+ Demod.samples += 4;
+ if(Demod.bitCount > 0) { // if we decoded bits
+ Demod.shiftReg >>= (9 - Demod.bitCount); // add the remaining decoded bits to the output
+ Demod.output[Demod.len++] = Demod.shiftReg & 0xff;
+ // No parity bit, so just shift a 0
+ Demod.parityBits <<= 1;
}
+ Demod.state = DEMOD_UNSYNCD; // start from the beginning
+ return TRUE; // we are finished with decoding the raw data sequence
}
- else if(modulation) {
- Demod.sub = SUB_SECOND_HALF;
+ if (IsModulationNibble2(bit)) { // modulation in first half
+ Demod.state = DEMOD_MOD_FIRST_HALF;
+ } else { // no modulation in first half
+ Demod.state = DEMOD_NOMOD_FIRST_HALF;
}
+ break;
+
- switch(Demod.state) {
- case DEMOD_START_OF_COMMUNICATION:
- if(Demod.sub == SUB_FIRST_HALF) {
- Demod.state = DEMOD_MANCHESTER_D;
- }
- else {
- Demod.output[Demod.len] = 0xab;
- Demod.state = DEMOD_ERROR_WAIT;
- //error = 0x02;
- }
- break;
-
- case DEMOD_MANCHESTER_D:
- case DEMOD_MANCHESTER_E:
- if(Demod.sub == SUB_FIRST_HALF) {
- Demod.bitCount++;
- Demod.shiftReg = (Demod.shiftReg >> 1) ^ 0x100;
- Demod.state = DEMOD_MANCHESTER_D;
- }
- else if(Demod.sub == SUB_SECOND_HALF) {
- Demod.bitCount++;
- Demod.shiftReg >>= 1;
- Demod.state = DEMOD_MANCHESTER_E;
- }
- else {
- Demod.state = DEMOD_MANCHESTER_F;
+ case DEMOD_MANCHESTER_DATA:
+ Demod.samples += 8;
+ if (IsModulationNibble1(bit)) { // modulation in first half
+ if (IsModulationNibble2(bit) & 0x0f) { // ... and in second half = collision
+ if (!Demod.collisionPos) {
+ Demod.collisionPos = (Demod.len << 3) + Demod.bitCount;
}
- break;
-
- case DEMOD_MANCHESTER_F:
- // Tag response does not need to be a complete byte!
- if(Demod.len > 0 || Demod.bitCount > 0) {
- if(Demod.bitCount > 0) {
- Demod.shiftReg >>= (9 - Demod.bitCount);
- Demod.output[Demod.len] = Demod.shiftReg & 0xff;
- Demod.len++;
- // No parity bit, so just shift a 0
- Demod.parityBits <<= 1;
- }
-
- Demod.state = DEMOD_UNSYNCD;
- return TRUE;
+ } // modulation in first half only - Sequence D = 1
+ Demod.bitCount++;
+ Demod.shiftReg = (Demod.shiftReg >> 1) | 0x100; // in both cases, add a 1 to the shiftreg
+ if(Demod.bitCount >= 9) { // if we decoded a full byte (including parity)
+ Demod.parityBits <<= 1; // make room for the parity bit
+ Demod.output[Demod.len++] = (Demod.shiftReg & 0xff);
+ Demod.parityBits |= ((Demod.shiftReg >> 8) & 0x01); // store parity bit
+ Demod.bitCount = 0;
+ Demod.shiftReg = 0;
+ }
+ } else { // no modulation in first half
+ if (IsModulationNibble2(bit)) { // and modulation in second half = Sequence E = 0
+ Demod.bitCount++;
+ Demod.shiftReg = (Demod.shiftReg >> 1); // add a 0 to the shiftreg
+ if(Demod.bitCount >= 9) { // if we decoded a full byte (including parity)
+ Demod.parityBits <<= 1; // make room for the new parity bit
+ Demod.output[Demod.len++] = (Demod.shiftReg & 0xff);
+ Demod.parityBits |= ((Demod.shiftReg >> 8) & 0x01); // store parity bit
+ Demod.bitCount = 0;
+ Demod.shiftReg = 0;
}
- else {
- Demod.output[Demod.len] = 0xad;
- Demod.state = DEMOD_ERROR_WAIT;
- //error = 0x03;
+ } else { // no modulation in both halves - End of communication
+ if(Demod.bitCount > 0) { // if we decoded bits
+ Demod.shiftReg >>= (9 - Demod.bitCount); // add the remaining decoded bits to the output
+ Demod.output[Demod.len++] = Demod.shiftReg & 0xff;
+ // No parity bit, so just shift a 0
+ Demod.parityBits <<= 1;
}
- break;
-
- case DEMOD_ERROR_WAIT:
- Demod.state = DEMOD_UNSYNCD;
- break;
-
- default:
- Demod.output[Demod.len] = 0xdd;
- Demod.state = DEMOD_UNSYNCD;
- break;
- }
-
- if(Demod.bitCount>=9) {
- Demod.output[Demod.len] = Demod.shiftReg & 0xff;
- Demod.len++;
-
- Demod.parityBits <<= 1;
- Demod.parityBits ^= ((Demod.shiftReg >> 8) & 0x01);
-
- Demod.bitCount = 0;
- Demod.shiftReg = 0;
+ Demod.state = DEMOD_UNSYNCD; // start from the beginning
+ return TRUE; // we are finished with decoding the raw data sequence
+ }
}
+
+ }
- /*if(error) {
- Demod.output[Demod.len] = 0xBB;
- Demod.len++;
- Demod.output[Demod.len] = error & 0xFF;
- Demod.len++;
- Demod.output[Demod.len] = 0xBB;
- Demod.len++;
- Demod.output[Demod.len] = bit & 0xFF;
- Demod.len++;
- Demod.output[Demod.len] = Demod.buffer & 0xFF;
- Demod.len++;
- Demod.output[Demod.len] = Demod.syncBit & 0xFF;
- Demod.len++;
- Demod.output[Demod.len] = 0xBB;
- Demod.len++;
- return TRUE;
- }*/
-
- }
-
- } // end (state != UNSYNCED)
-
- return FALSE;
+ return FALSE; // not finished yet, need more data
}
//=============================================================================
LED_B_OFF();
}
- if(ManchesterDecoding(data[0] & 0x0F)) {
+ if(ManchesterDecoding(data[0], 0)) {
LED_B_ON();
if (!LogTrace(receivedResponse, Demod.len, 0 - Demod.samples, Demod.parityBits, FALSE)) break;
while(GetCountMifare() < (*timing & 0xfffffff8)); // Delay transfer (multiple of 8 MF clock ticks)
}
- for(c = 0; c < 10;) { // standard delay for each transfer (allow tag to be ready after last transmission)
+ for(c = 0; c < 10;) { // standard delay for each transfer (allow tag to be ready after last transmission?)
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
AT91C_BASE_SSC->SSC_THR = 0x00;
c++;
//-----------------------------------------------------------------------------
// Wait a certain time for tag response
// If a response is captured return TRUE
-// If it takes to long return FALSE
+// If it takes too long return FALSE
//-----------------------------------------------------------------------------
-static int GetIso14443aAnswerFromTag(uint8_t *receivedResponse, int maxLen, int *samples, int *elapsed) //uint8_t *buffer
+static int GetIso14443aAnswerFromTag(uint8_t *receivedResponse, uint16_t offset, int maxLen, int *samples)
{
- // buffer needs to be 512 bytes
int c;
-
+
// Set FPGA mode to "reader listen mode", no modulation (listen
// only, since we are receiving, not transmitting).
// Signal field is on with the appropriate LED
Demod.state = DEMOD_UNSYNCD;
uint8_t b;
- if (elapsed) *elapsed = 0;
c = 0;
for(;;) {
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
if(c < iso14a_timeout) { c++; } else { return FALSE; }
b = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
- if(ManchesterDecoding((b>>4) & 0xf)) {
- *samples = ((c - 1) << 3) + 4;
- return TRUE;
- }
- if(ManchesterDecoding(b & 0x0f)) {
- *samples = c << 3;
+ if(ManchesterDecoding(b, offset)) {
+ *samples = Demod.samples;
return TRUE;
}
}
CodeIso14443aBitsAsReaderPar(frame,bits,par);
- // Select the card
+ // Send command to tag
TransmitFor14443a(ToSend, ToSendMax, timing);
if(trigger)
LED_A_ON();
- // Store reader command in buffer
+ // Log reader command in trace buffer
if (tracing) LogTrace(frame,nbytes(bits),0,par,TRUE);
}
ReaderTransmitBitsPar(frame,len*8,par, timing);
}
+void ReaderTransmitBits(uint8_t* frame, int len, uint32_t *timing)
+{
+ // Generate parity and redirect
+ ReaderTransmitBitsPar(frame,len,GetParity(frame,len/8), timing);
+}
+
void ReaderTransmit(uint8_t* frame, int len, uint32_t *timing)
{
// Generate parity and redirect
ReaderTransmitBitsPar(frame,len*8,GetParity(frame,len), timing);
}
+int ReaderReceiveOffset(uint8_t* receivedAnswer, uint16_t offset)
+{
+ int samples = 0;
+ if (!GetIso14443aAnswerFromTag(receivedAnswer,offset,160,&samples)) return FALSE;
+ if (tracing) LogTrace(receivedAnswer,Demod.len,samples,Demod.parityBits,FALSE);
+ if(samples == 0) return FALSE;
+ return Demod.len;
+}
+
int ReaderReceive(uint8_t* receivedAnswer)
{
- int samples = 0;
- if (!GetIso14443aAnswerFromTag(receivedAnswer,160,&samples,0)) return FALSE;
- if (tracing) LogTrace(receivedAnswer,Demod.len,samples,Demod.parityBits,FALSE);
- if(samples == 0) return FALSE;
- return Demod.len;
+ return ReaderReceiveOffset(receivedAnswer, 0);
}
-int ReaderReceivePar(uint8_t* receivedAnswer, uint32_t * parptr)
+int ReaderReceivePar(uint8_t *receivedAnswer, uint32_t *parptr)
{
- int samples = 0;
- if (!GetIso14443aAnswerFromTag(receivedAnswer,160,&samples,0)) return FALSE;
- if (tracing) LogTrace(receivedAnswer,Demod.len,samples,Demod.parityBits,FALSE);
+ int samples = 0;
+ if (!GetIso14443aAnswerFromTag(receivedAnswer,0,160,&samples)) return FALSE;
+ if (tracing) LogTrace(receivedAnswer,Demod.len,samples,Demod.parityBits,FALSE);
*parptr = Demod.parityBits;
- if(samples == 0) return FALSE;
- return Demod.len;
+ if(samples == 0) return FALSE;
+ return Demod.len;
}
-/* performs iso14443a anticolision procedure
+/* performs iso14443a anticollision procedure
* fills the uid pointer unless NULL
* fills resp_data unless NULL */
int iso14443a_select_card(byte_t* uid_ptr, iso14a_card_select_t* p_hi14a_card, uint32_t* cuid_ptr) {
uint8_t wupa[] = { 0x52 }; // 0x26 - REQA 0x52 - WAKE-UP
uint8_t sel_all[] = { 0x93,0x20 };
- uint8_t sel_uid[] = { 0x93,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00 };
+ uint8_t sel_uid[] = { 0x93,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
uint8_t rats[] = { 0xE0,0x80,0x00,0x00 }; // FSD=256, FSDI=8, CID=0
uint8_t* resp = (((uint8_t *)BigBuf) + FREE_BUFFER_OFFSET); // was 3560 - tied to other size changes
byte_t uid_resp[4];
ReaderTransmitBitsPar(wupa,7,0, NULL);
// Receive the ATQA
if(!ReaderReceive(resp)) return 0;
-// Dbprintf("atqa: %02x %02x",resp[0],resp[1]);
+ // Dbprintf("atqa: %02x %02x",resp[0],resp[1]);
if(p_hi14a_card) {
memcpy(p_hi14a_card->atqa, resp, 2);
ReaderTransmit(sel_all,sizeof(sel_all), NULL);
if (!ReaderReceive(resp)) return 0;
- // First backup the current uid
- memcpy(uid_resp,resp,4);
- uid_resp_len = 4;
+ if (Demod.collisionPos) { // we had a collision and need to construct the UID bit by bit
+ memset(uid_resp, 0, 4);
+ uint16_t uid_resp_bits = 0;
+ uint16_t collision_answer_offset = 0;
+ // anti-collision-loop:
+ while (Demod.collisionPos) {
+ Dbprintf("Multiple tags detected. Collision after Bit %d", Demod.collisionPos);
+ for (uint16_t i = collision_answer_offset; i < Demod.collisionPos; i++, uid_resp_bits++) { // add valid UID bits before collision point
+ uint16_t UIDbit = (resp[i/8] >> (i % 8)) & 0x01;
+ uid_resp[uid_resp_bits & 0xf8] |= UIDbit << (uid_resp_bits % 8);
+ }
+ uid_resp[uid_resp_bits/8] |= 1 << (uid_resp_bits % 8); // next time select the card(s) with a 1 in the collision position
+ uid_resp_bits++;
+ // construct anticollosion command:
+ sel_uid[1] = ((2 + uid_resp_bits/8) << 4) | (uid_resp_bits & 0x07); // length of data in bytes and bits
+ for (uint16_t i = 0; i <= uid_resp_bits/8; i++) {
+ sel_uid[2+i] = uid_resp[i];
+ }
+ collision_answer_offset = uid_resp_bits%8;
+ ReaderTransmitBits(sel_uid, 16 + uid_resp_bits, NULL);
+ if (!ReaderReceiveOffset(resp, collision_answer_offset)) return 0;
+ }
+ // finally, add the last bits and BCC of the UID
+ for (uint16_t i = collision_answer_offset; i < (Demod.len-1)*8; i++, uid_resp_bits++) {
+ uint16_t UIDbit = (resp[i/8] >> (i%8)) & 0x01;
+ uid_resp[uid_resp_bits/8] |= UIDbit << (uid_resp_bits % 8);
+ }
+
+ } else { // no collision, use the response to SELECT_ALL as current uid
+ memcpy(uid_resp,resp,4);
+ }
+ uid_resp_len = 4;
// Dbprintf("uid: %02x %02x %02x %02x",uid_resp[0],uid_resp[1],uid_resp[2],uid_resp[3]);
- // calculate crypto UID. Always use last 4 Bytes.
+ // calculate crypto UID. Always use last 4 Bytes.
if(cuid_ptr) {
*cuid_ptr = bytes_to_num(uid_resp, 4);
}
// Construct SELECT UID command
- memcpy(sel_uid+2,resp,5);
- AppendCrc14443a(sel_uid,7);
+ sel_uid[1] = 0x70; // transmitting a full UID (1 Byte cmd, 1 Byte NVB, 4 Byte UID, 1 Byte BCC, 2 Bytes CRC)
+ memcpy(sel_uid+2,uid_resp,4); // the UID
+ sel_uid[6] = sel_uid[2] ^ sel_uid[3] ^ sel_uid[4] ^ sel_uid[5]; // calculate and add BCC
+ AppendCrc14443a(sel_uid,7); // calculate and add CRC
ReaderTransmit(sel_uid,sizeof(sel_uid), NULL);
// Receive the SAK
sak = resp[0];
// Test if more parts of the uid are comming
- if ((sak & 0x04) && uid_resp[0] == 0x88) {
+ if ((sak & 0x04) /* && uid_resp[0] == 0x88 */) {
// Remove first byte, 0x88 is not an UID byte, it CT, see page 3 of:
// http://www.nxp.com/documents/application_note/AN10927.pdf
memcpy(uid_resp, uid_resp + 1, 3);
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_MOD);
SpinDelay(7); // iso14443-3 specifies 5ms max.
+ Demod.state = DEMOD_UNSYNCD;
iso14a_timeout = 2048; //default
}
if(param & ISO14A_CONNECT) {
iso14a_clear_trace();
}
+
iso14a_set_tracing(true);
if(param & ISO14A_REQUEST_TRIGGER) {
static uint8_t mf_nr_ar3;
uint8_t* receivedAnswer = (((uint8_t *)BigBuf) + FREE_BUFFER_OFFSET);
- traceLen = 0;
+ iso14a_clear_trace();
tracing = false;
byte_t nt_diff = 0;
LED_B_OFF();
LED_C_OFF();
-
+
for(uint16_t i = 0; TRUE; i++) {
WDT_HIT();
//keep the card active
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_MOD);
- // CodeIso14443aBitsAsReaderPar(mf_auth, sizeof(mf_auth)*8, GetParity(mf_auth, sizeof(mf_auth)*8));
-
sync_time = (sync_time & 0xfffffff8) + sync_cycles + catch_up_cycles;
catch_up_cycles = 0;
tracing = TRUE;
}
-//-----------------------------------------------------------------------------
-// MIFARE 1K simulate.
-//
-//-----------------------------------------------------------------------------
-void Mifare1ksim(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)
+/**
+ *MIFARE 1K simulate.
+ *
+ *@param flags :
+ * FLAG_INTERACTIVE - In interactive mode, we are expected to finish the operation with an ACK
+ * 4B_FLAG_UID_IN_DATA - means that there is a 4-byte UID in the data-section, we're expected to use that
+ * 7B_FLAG_UID_IN_DATA - means that there is a 7-byte UID in the data-section, we're expected to use that
+ * FLAG_NR_AR_ATTACK - means we should collect NR_AR responses for bruteforcing later
+ *@param exitAfterNReads, exit simulation after n blocks have been read, 0 is inifite
+ */
+void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *datain)
{
int cardSTATE = MFEMUL_NOFIELD;
int _7BUID = 0;
int vHf = 0; // in mV
- //int nextCycleTimeout = 0;
int res;
-// uint32_t timer = 0;
uint32_t selTimer = 0;
uint32_t authTimer = 0;
uint32_t par = 0;
uint8_t cardWRBL = 0;
uint8_t cardAUTHSC = 0;
uint8_t cardAUTHKEY = 0xff; // no authentication
- //uint32_t cardRn = 0;
uint32_t cardRr = 0;
uint32_t cuid = 0;
//uint32_t rn_enc = 0;
struct Crypto1State mpcs = {0, 0};
struct Crypto1State *pcs;
pcs = &mpcs;
-
+ uint32_t numReads = 0;//Counts numer of times reader read a block
uint8_t* receivedCmd = eml_get_bigbufptr_recbuf();
uint8_t *response = eml_get_bigbufptr_sendbuf();
- static uint8_t rATQA[] = {0x04, 0x00}; // Mifare classic 1k 4BUID
+ uint8_t rATQA[] = {0x04, 0x00}; // Mifare classic 1k 4BUID
+ uint8_t rUIDBCC1[] = {0xde, 0xad, 0xbe, 0xaf, 0x62};
+ uint8_t rUIDBCC2[] = {0xde, 0xad, 0xbe, 0xaf, 0x62}; // !!!
+ uint8_t rSAK[] = {0x08, 0xb6, 0xdd};
+ uint8_t rSAK1[] = {0x04, 0xda, 0x17};
- static uint8_t rUIDBCC1[] = {0xde, 0xad, 0xbe, 0xaf, 0x62};
- static uint8_t rUIDBCC2[] = {0xde, 0xad, 0xbe, 0xaf, 0x62}; // !!!
-
- static uint8_t rSAK[] = {0x08, 0xb6, 0xdd};
- static uint8_t rSAK1[] = {0x04, 0xda, 0x17};
+ uint8_t rAUTH_NT[] = {0x01, 0x02, 0x03, 0x04};
+ uint8_t rAUTH_AT[] = {0x00, 0x00, 0x00, 0x00};
- static uint8_t rAUTH_NT[] = {0x01, 0x02, 0x03, 0x04};
-// static uint8_t rAUTH_NT[] = {0x1a, 0xac, 0xff, 0x4f};
- static uint8_t rAUTH_AT[] = {0x00, 0x00, 0x00, 0x00};
+ //Here, we collect UID,NT,AR,NR,UID2,NT2,AR2,NR2
+ // This can be used in a reader-only attack.
+ // (it can also be retrieved via 'hf 14a list', but hey...
+ uint32_t ar_nr_responses[] = {0,0,0,0,0,0,0,0};
+ uint8_t ar_nr_collected = 0;
// clear trace
- traceLen = 0;
+ iso14a_clear_trace();
+
tracing = true;
// Authenticate response - nonce
uint32_t nonce = bytes_to_num(rAUTH_NT, 4);
-
- // get UID from emul memory
- emlGetMemBt(receivedCmd, 7, 1);
- _7BUID = !(receivedCmd[0] == 0x00);
- if (!_7BUID) { // ---------- 4BUID
- rATQA[0] = 0x04;
- emlGetMemBt(rUIDBCC1, 0, 4);
+ //-- Determine the UID
+ // Can be set from emulator memory, incoming data
+ // and can be 7 or 4 bytes long
+ if(flags & FLAG_4B_UID_IN_DATA)
+ {
+ // 4B uid comes from data-portion of packet
+ memcpy(rUIDBCC1,datain,4);
rUIDBCC1[4] = rUIDBCC1[0] ^ rUIDBCC1[1] ^ rUIDBCC1[2] ^ rUIDBCC1[3];
- } else { // ---------- 7BUID
- rATQA[0] = 0x44;
+ }else if(flags & FLAG_7B_UID_IN_DATA)
+ {
+ // 7B uid comes from data-portion of packet
+ memcpy(&rUIDBCC1[1],datain,3);
+ memcpy(rUIDBCC2, datain+3, 4);
+ _7BUID = true;
+ }
+ else
+ {
+ // get UID from emul memory
+ emlGetMemBt(receivedCmd, 7, 1);
+ _7BUID = !(receivedCmd[0] == 0x00);
+ if (!_7BUID) { // ---------- 4BUID
+ emlGetMemBt(rUIDBCC1, 0, 4);
+ } else { // ---------- 7BUID
+ emlGetMemBt(&rUIDBCC1[1], 0, 3);
+ emlGetMemBt(rUIDBCC2, 3, 4);
+ }
+ }
+ /*
+ * Regardless of what method was used to set the UID, set fifth byte and modify
+ * the ATQA for 4 or 7-byte UID
+ */
+
+ rUIDBCC1[4] = rUIDBCC1[0] ^ rUIDBCC1[1] ^ rUIDBCC1[2] ^ rUIDBCC1[3];
+ if(_7BUID)
+ {
+ rATQA[0] = 0x44;
rUIDBCC1[0] = 0x88;
- emlGetMemBt(&rUIDBCC1[1], 0, 3);
- rUIDBCC1[4] = rUIDBCC1[0] ^ rUIDBCC1[1] ^ rUIDBCC1[2] ^ rUIDBCC1[3];
- emlGetMemBt(rUIDBCC2, 3, 4);
rUIDBCC2[4] = rUIDBCC2[0] ^ rUIDBCC2[1] ^ rUIDBCC2[2] ^ rUIDBCC2[3];
}
-// -------------------------------------- test area
-
-// -------------------------------------- END test area
// start mkseconds counter
StartCountUS();
SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
FpgaSetupSsc();
- FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_TAGSIM_LISTEN);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_TAGSIM_LISTEN);
SpinDelay(200);
- if (MF_DBGLEVEL >= 1) Dbprintf("Started. 7buid=%d", _7BUID);
+ if (MF_DBGLEVEL >= 1) {
+ if (!_7BUID) {
+ Dbprintf("4B UID: %02x%02x%02x%02x",rUIDBCC1[0] , rUIDBCC1[1] , rUIDBCC1[2] , rUIDBCC1[3]);
+ }else
+ {
+ Dbprintf("7B UID: (%02x)%02x%02x%02x%02x%02x%02x%02x",rUIDBCC1[0] , rUIDBCC1[1] , rUIDBCC1[2] , rUIDBCC1[3],rUIDBCC2[0],rUIDBCC2[1] ,rUIDBCC2[2] , rUIDBCC2[3]);
+ }
+ }
// calibrate mkseconds counter
GetDeltaCountUS();
- while (true) {
+ bool finished = false;
+ while (!BUTTON_PRESS() && !finished) {
WDT_HIT();
- if(BUTTON_PRESS()) {
- break;
- }
-
// find reader field
// Vref = 3300mV, and an 10:1 voltage divider on the input
// can measure voltages up to 33000 mV
LED_A_ON();
}
}
+ if(cardSTATE == MFEMUL_NOFIELD) continue;
- if (cardSTATE != MFEMUL_NOFIELD) {
- res = EmGetCmd(receivedCmd, &len, RECV_CMD_SIZE); // (+ nextCycleTimeout)
- if (res == 2) {
- cardSTATE = MFEMUL_NOFIELD;
- LEDsoff();
- continue;
- }
- if(res) break;
- }
-
- //nextCycleTimeout = 0;
-
-// if (len) Dbprintf("len:%d cmd: %02x %02x %02x %02x", len, receivedCmd[0], receivedCmd[1], receivedCmd[2], receivedCmd[3]);
-
- if (len != 4 && cardSTATE != MFEMUL_NOFIELD) { // len != 4 <---- speed up the code 4 authentication
- // REQ or WUP request in ANY state and WUP in HALTED state
- if (len == 1 && ((receivedCmd[0] == 0x26 && cardSTATE != MFEMUL_HALTED) || receivedCmd[0] == 0x52)) {
- selTimer = GetTickCount();
- EmSendCmdEx(rATQA, sizeof(rATQA), (receivedCmd[0] == 0x52));
- cardSTATE = MFEMUL_SELECT1;
-
- // init crypto block
- LED_B_OFF();
- LED_C_OFF();
- crypto1_destroy(pcs);
- cardAUTHKEY = 0xff;
- }
+ //Now, get data
+
+ res = EmGetCmd(receivedCmd, &len, RECV_CMD_SIZE); // (+ nextCycleTimeout)
+ if (res == 2) { //Field is off!
+ cardSTATE = MFEMUL_NOFIELD;
+ LEDsoff();
+ continue;
+ }else if(res == 1) break;//return value 1 means button press
+
+
+ // REQ or WUP request in ANY state and WUP in HALTED state
+ if (len == 1 && ((receivedCmd[0] == 0x26 && cardSTATE != MFEMUL_HALTED) || receivedCmd[0] == 0x52)) {
+ selTimer = GetTickCount();
+ EmSendCmdEx(rATQA, sizeof(rATQA), (receivedCmd[0] == 0x52));
+ cardSTATE = MFEMUL_SELECT1;
+
+ // init crypto block
+ LED_B_OFF();
+ LED_C_OFF();
+ crypto1_destroy(pcs);
+ cardAUTHKEY = 0xff;
+ continue;
}
-
+
switch (cardSTATE) {
- case MFEMUL_NOFIELD:{
- break;
- }
- case MFEMUL_HALTED:{
- break;
- }
+ case MFEMUL_NOFIELD:
+ case MFEMUL_HALTED:
case MFEMUL_IDLE:{
break;
}
case MFEMUL_SELECT1:{
// select all
if (len == 2 && (receivedCmd[0] == 0x93 && receivedCmd[1] == 0x20)) {
+ if (MF_DBGLEVEL >= 4) Dbprintf("SELECT ALL received");
EmSendCmd(rUIDBCC1, sizeof(rUIDBCC1));
break;
}
+ if (MF_DBGLEVEL >= 4 && len == 9 && receivedCmd[0] == 0x93 && receivedCmd[1] == 0x70 )
+ {
+ Dbprintf("SELECT %02x%02x%02x%02x received",receivedCmd[2],receivedCmd[3],receivedCmd[4],receivedCmd[5]);
+ }
// select card
if (len == 9 &&
(receivedCmd[0] == 0x93 && receivedCmd[1] == 0x70 && memcmp(&receivedCmd[2], rUIDBCC1, 4) == 0)) {
+
if (!_7BUID)
EmSendCmd(rSAK, sizeof(rSAK));
else
break;
}
+ case MFEMUL_AUTH1:{
+ if( len != 8)
+ {
+ cardSTATE_TO_IDLE();
+ break;
+ }
+ uint32_t ar = bytes_to_num(receivedCmd, 4);
+ uint32_t nr= bytes_to_num(&receivedCmd[4], 4);
+
+ //Collect AR/NR
+ if(ar_nr_collected < 2){
+ if(ar_nr_responses[ar_nr_collected*4+2] != ar)
+ {// Avoid duplicates
+ ar_nr_collected++;
+ ar_nr_responses[ar_nr_collected*4] = cuid;
+ ar_nr_responses[ar_nr_collected*4+1] = nonce;
+ ar_nr_responses[ar_nr_collected*4+2] = ar;
+ ar_nr_responses[ar_nr_collected*4+3] = nr;
+ }
+ }
+
+ // --- crypto
+ crypto1_word(pcs, ar , 1);
+ cardRr = nr ^ crypto1_word(pcs, 0, 0);
+
+ // test if auth OK
+ if (cardRr != prng_successor(nonce, 64)){
+ if (MF_DBGLEVEL >= 2) Dbprintf("AUTH FAILED. cardRr=%08x, succ=%08x",cardRr, prng_successor(nonce, 64));
+ //Shouldn't we respond anything here?
+ // Right now, we don't nack or anything, which causes the
+ // reader to do a WUPA after a while. /Martin
+ cardSTATE_TO_IDLE();
+ break;
+ }
+
+ ans = prng_successor(nonce, 96) ^ crypto1_word(pcs, 0, 0);
+
+ num_to_bytes(ans, 4, rAUTH_AT);
+ // --- crypto
+ EmSendCmd(rAUTH_AT, sizeof(rAUTH_AT));
+ LED_C_ON();
+ cardSTATE = MFEMUL_WORK;
+ if (MF_DBGLEVEL >= 4) Dbprintf("AUTH COMPLETED. sector=%d, key=%d time=%d", cardAUTHSC, cardAUTHKEY, GetTickCount() - authTimer);
+ break;
+ }
case MFEMUL_SELECT2:{
if (!len) break;
// i guess there is a command). go into the work state.
if (len != 4) break;
cardSTATE = MFEMUL_WORK;
- goto lbWORK;
- }
- case MFEMUL_AUTH1:{
- if (len == 8) {
- // --- crypto
- //rn_enc = bytes_to_num(receivedCmd, 4);
- //cardRn = rn_enc ^ crypto1_word(pcs, rn_enc , 1);
- cardRr = bytes_to_num(&receivedCmd[4], 4) ^ crypto1_word(pcs, 0, 0);
- // test if auth OK
- if (cardRr != prng_successor(nonce, 64)){
- if (MF_DBGLEVEL >= 4) Dbprintf("AUTH FAILED. cardRr=%08x, succ=%08x", cardRr, prng_successor(nonce, 64));
- cardSTATE_TO_IDLE();
- break;
- }
- ans = prng_successor(nonce, 96) ^ crypto1_word(pcs, 0, 0);
- num_to_bytes(ans, 4, rAUTH_AT);
- // --- crypto
- EmSendCmd(rAUTH_AT, sizeof(rAUTH_AT));
- cardSTATE = MFEMUL_AUTH2;
- } else {
- cardSTATE_TO_IDLE();
- }
- if (cardSTATE != MFEMUL_AUTH2) break;
- }
- case MFEMUL_AUTH2:{
- LED_C_ON();
- cardSTATE = MFEMUL_WORK;
- if (MF_DBGLEVEL >= 4) Dbprintf("AUTH COMPLETED. sec=%d, key=%d time=%d", cardAUTHSC, cardAUTHKEY, GetTickCount() - authTimer);
- break;
+ //goto lbWORK;
+ //intentional fall-through to the next case-stmt
}
case MFEMUL_WORK:{
-lbWORK: if (len == 0) break;
-
- if (cardAUTHKEY == 0xff) {
- // first authentication
- if (len == 4 && (receivedCmd[0] == 0x60 || receivedCmd[0] == 0x61)) {
- authTimer = GetTickCount();
-
- cardAUTHSC = receivedCmd[1] / 4; // received block num
- cardAUTHKEY = receivedCmd[0] - 0x60;
-
- // --- crypto
- crypto1_create(pcs, emlGetKey(cardAUTHSC, cardAUTHKEY));
- ans = nonce ^ crypto1_word(pcs, cuid ^ nonce, 0);
- num_to_bytes(nonce, 4, rAUTH_AT);
- EmSendCmd(rAUTH_AT, sizeof(rAUTH_AT));
- // --- crypto
-
-// last working revision
-// EmSendCmd14443aRaw(resp1, resp1Len, 0);
-// LogTrace(NULL, 0, GetDeltaCountUS(), 0, true);
+ if (len == 0) break;
- cardSTATE = MFEMUL_AUTH1;
- //nextCycleTimeout = 10;
- break;
- }
- } else {
+ bool encrypted_data = (cardAUTHKEY != 0xFF) ;
+
+ if(encrypted_data)
+ {
// decrypt seqence
mf_crypto1_decrypt(pcs, receivedCmd, len);
-
- // nested authentication
- if (len == 4 && (receivedCmd[0] == 0x60 || receivedCmd[0] == 0x61)) {
- authTimer = GetTickCount();
+ }
- cardAUTHSC = receivedCmd[1] / 4; // received block num
- cardAUTHKEY = receivedCmd[0] - 0x60;
+ if (len == 4 && (receivedCmd[0] == 0x60 || receivedCmd[0] == 0x61)) {
+ authTimer = GetTickCount();
+ cardAUTHSC = receivedCmd[1] / 4; // received block num
+ cardAUTHKEY = receivedCmd[0] - 0x60;
+ crypto1_destroy(pcs);//Added by martin
+ crypto1_create(pcs, emlGetKey(cardAUTHSC, cardAUTHKEY));
- // --- crypto
- crypto1_create(pcs, emlGetKey(cardAUTHSC, cardAUTHKEY));
- ans = nonce ^ crypto1_word(pcs, cuid ^ nonce, 0);
- num_to_bytes(ans, 4, rAUTH_AT);
- EmSendCmd(rAUTH_AT, sizeof(rAUTH_AT));
- // --- crypto
+ if (!encrypted_data) { // first authentication
+ if (MF_DBGLEVEL >= 2) Dbprintf("Reader authenticating for block %d (0x%02x) with key %d",receivedCmd[1] ,receivedCmd[1],cardAUTHKEY );
- cardSTATE = MFEMUL_AUTH1;
- //nextCycleTimeout = 10;
- break;
+ crypto1_word(pcs, cuid ^ nonce, 0);//Update crypto state
+ num_to_bytes(nonce, 4, rAUTH_AT); // Send nonce
+ }
+ else{ // nested authentication
+ if (MF_DBGLEVEL >= 2) Dbprintf("Reader doing nested authentication for block %d (0x%02x) with key %d",receivedCmd[1] ,receivedCmd[1],cardAUTHKEY );
+ ans = nonce ^ crypto1_word(pcs, cuid ^ nonce, 0);
+ num_to_bytes(ans, 4, rAUTH_AT);
}
+ EmSendCmd(rAUTH_AT, sizeof(rAUTH_AT));
+ //Dbprintf("Sending rAUTH %02x%02x%02x%02x", rAUTH_AT[0],rAUTH_AT[1],rAUTH_AT[2],rAUTH_AT[3]);
+ cardSTATE = MFEMUL_AUTH1;
+ break;
}
-
+
// rule 13 of 7.5.3. in ISO 14443-4. chaining shall be continued
// BUT... ACK --> NACK
if (len == 1 && receivedCmd[0] == CARD_ACK) {
break;
}
- // read block
- if (len == 4 && receivedCmd[0] == 0x30) {
- if (receivedCmd[1] >= 16 * 4 || receivedCmd[1] / 4 != cardAUTHSC) {
+ if(len != 4) break;
+
+ if(receivedCmd[0] == 0x30 // read block
+ || receivedCmd[0] == 0xA0 // write block
+ || receivedCmd[0] == 0xC0
+ || receivedCmd[0] == 0xC1
+ || receivedCmd[0] == 0xC2 // inc dec restore
+ || receivedCmd[0] == 0xB0) // transfer
+ {
+ if (receivedCmd[1] >= 16 * 4)
+ {
+
EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
+ if (MF_DBGLEVEL >= 2) Dbprintf("Reader tried to operate (0x%02) on out of range block: %d (0x%02x), nacking",receivedCmd[0],receivedCmd[1],receivedCmd[1]);
break;
}
+
+ if (receivedCmd[1] / 4 != cardAUTHSC)
+ {
+ EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
+ if (MF_DBGLEVEL >= 2) Dbprintf("Reader tried to operate (0x%02) on block (0x%02x) not authenticated for (0x%02x), nacking",receivedCmd[0],receivedCmd[1],cardAUTHSC);
+ break;
+ }
+ }
+ // read block
+ if (receivedCmd[0] == 0x30) {
+ if (MF_DBGLEVEL >= 2) {
+ Dbprintf("Reader reading block %d (0x%02x)",receivedCmd[1],receivedCmd[1]);
+ }
emlGetMem(response, receivedCmd[1], 1);
AppendCrc14443a(response, 16);
mf_crypto1_encrypt(pcs, response, 18, &par);
EmSendCmdPar(response, 18, par);
+ numReads++;
+ if(exitAfterNReads > 0 && numReads == exitAfterNReads)
+ {
+ Dbprintf("%d reads done, exiting", numReads);
+ finished = true;
+ }
break;
}
-
// write block
- if (len == 4 && receivedCmd[0] == 0xA0) {
- if (receivedCmd[1] >= 16 * 4 || receivedCmd[1] / 4 != cardAUTHSC) {
- EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
- break;
- }
+ if (receivedCmd[0] == 0xA0) {
+ if (MF_DBGLEVEL >= 2) Dbprintf("RECV 0xA0 write block %d (%02x)",receivedCmd[1],receivedCmd[1]);
+
EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_ACK));
//nextCycleTimeout = 50;
cardSTATE = MFEMUL_WRITEBL2;
cardWRBL = receivedCmd[1];
break;
- }
-
- // works with cardINTREG
-
+ }
// increment, decrement, restore
- if (len == 4 && (receivedCmd[0] == 0xC0 || receivedCmd[0] == 0xC1 || receivedCmd[0] == 0xC2)) {
- if (receivedCmd[1] >= 16 * 4 ||
- receivedCmd[1] / 4 != cardAUTHSC ||
- emlCheckValBl(receivedCmd[1])) {
+ if (receivedCmd[0] == 0xC0 || receivedCmd[0] == 0xC1 || receivedCmd[0] == 0xC2) {
+ if (MF_DBGLEVEL >= 2) Dbprintf("RECV 0x%02x inc(0xC1)/dec(0xC0)/restore(0xC2) block %d (%02x)",receivedCmd[0],receivedCmd[1],receivedCmd[1]);
+
+ if (emlCheckValBl(receivedCmd[1])) {
+ if (MF_DBGLEVEL >= 2) Dbprintf("Reader tried to operate on block, but emlCheckValBl failed, nacking");
EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
break;
}
if (receivedCmd[0] == 0xC2)
cardSTATE = MFEMUL_INTREG_REST;
cardWRBL = receivedCmd[1];
-
+
break;
}
-
// transfer
- if (len == 4 && receivedCmd[0] == 0xB0) {
- if (receivedCmd[1] >= 16 * 4 || receivedCmd[1] / 4 != cardAUTHSC) {
- EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
- break;
- }
+ if (receivedCmd[0] == 0xB0) {
+ if (MF_DBGLEVEL >= 2) Dbprintf("RECV 0x%02x transfer block %d (%02x)",receivedCmd[0],receivedCmd[1],receivedCmd[1]);
if (emlSetValBl(cardINTREG, cardINTBLOCK, receivedCmd[1]))
EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
}
// halt
- if (len == 4 && (receivedCmd[0] == 0x50 && receivedCmd[1] == 0x00)) {
+ if (receivedCmd[0] == 0x50 && receivedCmd[1] == 0x00) {
LED_B_OFF();
LED_C_OFF();
cardSTATE = MFEMUL_HALTED;
if (MF_DBGLEVEL >= 4) Dbprintf("--> HALTED. Selected time: %d ms", GetTickCount() - selTimer);
break;
}
-
- // command not allowed
- if (len == 4) {
+ // RATS
+ if (receivedCmd[0] == 0xe0) {//RATS
EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
break;
}
+ // command not allowed
+ if (MF_DBGLEVEL >= 4) Dbprintf("Received command not allowed, nacking");
+ EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
+
// case break
break;
}
// add trace trailer
memset(rAUTH_NT, 0x44, 4);
LogTrace(rAUTH_NT, 4, 0, 0, TRUE);
-
+ if(flags & FLAG_INTERACTIVE)// Interactive mode flag, means we need to send ACK
+ {
+ //May just aswell send the collected ar_nr in the response aswell
+ cmd_send(CMD_ACK,CMD_SIMULATE_MIFARE_CARD,0,0,&ar_nr_responses,ar_nr_collected*4*4);
+ }
+ if(flags & FLAG_NR_AR_ATTACK)
+ {
+ if(ar_nr_collected > 1)
+ {
+ Dbprintf("Collected two pairs of AR/NR which can be used to extract keys from reader:");
+ Dbprintf("../tools/mfkey/mfkey32 %08x %08x %08x %08x",
+ ar_nr_responses[0], // UID
+ ar_nr_responses[1], //NT
+ ar_nr_responses[2], //AR1
+ ar_nr_responses[3], //NR1
+ ar_nr_responses[6], //AR2
+ ar_nr_responses[7] //NR2
+ );
+ }else
+ {
+ Dbprintf("Failed to obtain two AR/NR pairs!");
+ if(ar_nr_collected >0)
+ {
+ Dbprintf("Only got these: UID=%08d, nonce=%08d, AR1=%08d, NR1=%08d",
+ ar_nr_responses[0], // UID
+ ar_nr_responses[1], //NT
+ ar_nr_responses[2], //AR1
+ ar_nr_responses[3] //NR1
+ );
+ }
+ }
+ }
if (MF_DBGLEVEL >= 1) Dbprintf("Emulator stopped. Tracing: %d trace length: %d ", tracing, traceLen);
}
+
+
//-----------------------------------------------------------------------------
// MIFARE sniffer.
//
Demod.state = DEMOD_UNSYNCD;
}
- if(ManchesterDecoding(data[0] & 0x0F)) {
+ if(ManchesterDecoding(data[0], 0)) {
LED_C_INV();
if (MfSniffLogic(receivedResponse, Demod.len, Demod.parityBits, Demod.bitCount, FALSE)) break;