#include "cmdhficlass.h"
#include "cmdhfmf.h"
#include "cmdhfmfu.h"
+#include "protocols.h"
static int CmdHelp(const char *Cmd);
return 0;
}
-//The following data is taken from http://www.proxmark.org/forum/viewtopic.php?pid=13501#p13501
-/*
-ISO14443A (usually NFC tags)
- 26 (7bits) = REQA
- 30 = Read (usage: 30+1byte block number+2bytes ISO14443A-CRC - answer: 16bytes)
- A2 = Write (usage: A2+1byte block number+4bytes data+2bytes ISO14443A-CRC - answer: 0A [ACK] or 00 [NAK])
- 52 (7bits) = WUPA (usage: 52(7bits) - answer: 2bytes ATQA)
- 93 20 = Anticollision (usage: 9320 - answer: 4bytes UID+1byte UID-bytes-xor)
- 93 70 = Select (usage: 9370+5bytes 9320 answer - answer: 1byte SAK)
- 95 20 = Anticollision of cascade level2
- 95 70 = Select of cascade level2
- 50 00 = Halt (usage: 5000+2bytes ISO14443A-CRC - no answer from card)
-Mifare
- 60 = Authenticate with KeyA
- 61 = Authenticate with KeyB
- 40 (7bits) = Used to put Chinese Changeable UID cards in special mode (must be followed by 43 (8bits) - answer: 0A)
- C0 = Decrement
- C1 = Increment
- C2 = Restore
- B0 = Transfer
-Ultralight C
- A0 = Compatibility Write (to accomodate MIFARE commands)
- 1A = Step1 Authenticate
- AF = Step2 Authenticate
-
-
-ISO14443B
- 05 = REQB
- 1D = ATTRIB
- 50 = HALT
-SRIX4K (tag does not respond to 05)
- 06 00 = INITIATE
- 0E xx = SELECT ID (xx = Chip-ID)
- 0B = Get UID
- 08 yy = Read Block (yy = block number)
- 09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written)
- 0C = Reset to Inventory
- 0F = Completion
- 0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate)
-
-
-ISO15693
- MANDATORY COMMANDS (all ISO15693 tags must support those)
- 01 = Inventory (usage: 260100+2bytes ISO15693-CRC - answer: 12bytes)
- 02 = Stay Quiet
- OPTIONAL COMMANDS (not all tags support them)
- 20 = Read Block (usage: 0220+1byte block number+2bytes ISO15693-CRC - answer: 4bytes)
- 21 = Write Block (usage: 0221+1byte block number+4bytes data+2bytes ISO15693-CRC - answer: 4bytes)
- 22 = Lock Block
- 23 = Read Multiple Blocks (usage: 0223+1byte 1st block to read+1byte last block to read+2bytes ISO15693-CRC)
- 25 = Select
- 26 = Reset to Ready
- 27 = Write AFI
- 28 = Lock AFI
- 29 = Write DSFID
- 2A = Lock DSFID
- 2B = Get_System_Info (usage: 022B+2bytes ISO15693-CRC - answer: 14 or more bytes)
- 2C = Read Multiple Block Security Status (usage: 022C+1byte 1st block security to read+1byte last block security to read+2bytes ISO15693-CRC)
-
-EM Microelectronic CUSTOM COMMANDS
- A5 = Active EAS (followed by 1byte IC Manufacturer code+1byte EAS type)
- A7 = Write EAS ID (followed by 1byte IC Manufacturer code+2bytes EAS value)
- B8 = Get Protection Status for a specific block (followed by 1byte IC Manufacturer code+1byte block number+1byte of how many blocks after the previous is needed the info)
- E4 = Login (followed by 1byte IC Manufacturer code+4bytes password)
-NXP/Philips CUSTOM COMMANDS
- A0 = Inventory Read
- A1 = Fast Inventory Read
- A2 = Set EAS
- A3 = Reset EAS
- A4 = Lock EAS
- A5 = EAS Alarm
- A6 = Password Protect EAS
- A7 = Write EAS ID
- A8 = Read EPC
- B0 = Inventory Page Read
- B1 = Fast Inventory Page Read
- B2 = Get Random Number
- B3 = Set Password
- B4 = Write Password
- B5 = Lock Password
- B6 = Bit Password Protection
- B7 = Lock Page Protection Condition
- B8 = Get Multiple Block Protection Status
- B9 = Destroy SLI
- BA = Enable Privacy
- BB = 64bit Password Protection
- 40 = Long Range CMD (Standard ISO/TR7003:1990)
- */
-
-#define ICLASS_CMD_ACTALL 0x0A
-#define ICLASS_CMD_READ_OR_IDENTIFY 0x0C
-#define ICLASS_CMD_SELECT 0x81
-#define ICLASS_CMD_PAGESEL 0x84
-#define ICLASS_CMD_READCHECK_KD 0x88
-#define ICLASS_CMD_READCHECK_KC 0x18
-#define ICLASS_CMD_CHECK 0x05
-#define ICLASS_CMD_DETECT 0x0F
-#define ICLASS_CMD_HALT 0x00
-#define ICLASS_CMD_UPDATE 0x87
-#define ICLASS_CMD_ACT 0x8E
-#define ICLASS_CMD_READ4 0x06
-
-
-#define ISO14443A_CMD_REQA 0x26
-#define ISO14443A_CMD_READBLOCK 0x30
-#define ISO14443A_CMD_WUPA 0x52
-#define ISO14443A_CMD_ANTICOLL_OR_SELECT 0x93
-#define ISO14443A_CMD_ANTICOLL_OR_SELECT_2 0x95
-#define ISO14443A_CMD_WRITEBLOCK 0xA0 // or 0xA2 ?
-#define ISO14443A_CMD_HALT 0x50
-#define ISO14443A_CMD_RATS 0xE0
-
-#define MIFARE_AUTH_KEYA 0x60
-#define MIFARE_AUTH_KEYB 0x61
-#define MIFARE_MAGICMODE 0x40
-#define MIFARE_CMD_INC 0xC0
-#define MIFARE_CMD_DEC 0xC1
-#define MIFARE_CMD_RESTORE 0xC2
-#define MIFARE_CMD_TRANSFER 0xB0
-
-#define MIFARE_ULC_WRITE 0xA0
-#define MIFARE_ULC_AUTH_1 0x1A
-#define MIFARE_ULC_AUTH_2 0xAF
-
-/**
-06 00 = INITIATE
-0E xx = SELECT ID (xx = Chip-ID)
-0B = Get UID
-08 yy = Read Block (yy = block number)
-09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written)
-0C = Reset to Inventory
-0F = Completion
-0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate)
-**/
-
-#define ISO14443B_REQB 0x05
-#define ISO14443B_ATTRIB 0x1D
-#define ISO14443B_HALT 0x50
-#define ISO14443B_INITIATE 0x06
-#define ISO14443B_SELECT 0x0E
-#define ISO14443B_GET_UID 0x0B
-#define ISO14443B_READ_BLK 0x08
-#define ISO14443B_WRITE_BLK 0x09
-#define ISO14443B_RESET 0x0C
-#define ISO14443B_COMPLETION 0x0F
-#define ISO14443B_AUTHENTICATE 0x0A
-
-//First byte is 26
-#define ISO15693_INVENTORY 0x01
-#define ISO15693_STAYQUIET 0x02
-//First byte is 02
-#define ISO15693_READBLOCK 0x20
-#define ISO15693_WRITEBLOCK 0x21
-#define ISO15693_LOCKBLOCK 0x22
-#define ISO15693_READ_MULTI_BLOCK 0x23
-#define ISO15693_SELECT 0x25
-#define ISO15693_RESET_TO_READY 0x26
-#define ISO15693_WRITE_AFI 0x27
-#define ISO15693_LOCK_AFI 0x28
-#define ISO15693_WRITE_DSFID 0x29
-#define ISO15693_LOCK_DSFID 0x2A
-#define ISO15693_GET_SYSTEM_INFO 0x2B
-#define ISO15693_READ_MULTI_SECSTATUS 0x2C
-
-
-#define ISO_14443A 0
-#define ICLASS 1
-#define ISO_14443B 2
-
void annotateIso14443a(char *exp, size_t size, uint8_t* cmd, uint8_t cmdsize)
{
projects / proxmark3-svn / blobdiff