#remove one of the following defines and comment out the relevant line
#in the next section to remove that particular feature from compilation
-APP_CFLAGS = -DWITH_LF -DWITH_ISO15693 -DWITH_ISO14443a -DWITH_ISO14443b -DWITH_ICLASS -DWITH_LEGICRF -DWITH_HITAG -DWITH_CRC -DON_DEVICE -fno-strict-aliasing
+APP_CFLAGS = -DWITH_LF -DWITH_ISO15693 -DWITH_ISO14443a -DWITH_ISO14443b -DWITH_ICLASS -DWITH_LEGICRF -DWITH_HITAG -DWITH_CRC -DON_DEVICE \
+ -fno-strict-aliasing -ffunction-sections -fdata-sections
#-DWITH_LCD
#SRC_LCD = fonts.c LCD.c
SRC_LF = lfops.c hitag2.c lfsampling.c
SRC_ISO15693 = iso15693.c iso15693tools.c
SRC_ISO14443a = epa.c iso14443a.c mifareutil.c mifarecmd.c mifaresniff.c
-SRC_ISO14443b = iso14443.c
+SRC_ISO14443b = iso14443b.c
SRC_CRAPTO1 = crapto1.c crypto1.c des.c aes.c
-SRC_CRC = iso14443crc.c crc.c crc16.c crc32.c
+SRC_CRC = iso14443crc.c crc.c crc16.c crc32.c
+#the FPGA bitstream files. Note: order matters!
+FPGA_BITSTREAMS = fpga_lf.bit fpga_hf.bit
+
+#the zlib source files required for decompressing the fpga config at run time
+SRC_ZLIB = inflate.c inffast.c inftrees.c adler32.c zutil.c
+#additional defines required to compile zlib
+ZLIB_CFLAGS = -DZ_SOLO -DZ_PREFIX -DNO_GZIP -DZLIB_PM3_TUNED
+APP_CFLAGS += $(ZLIB_CFLAGS)
+# zlib includes:
+APP_CFLAGS += -I../zlib
+
+# stdint.h provided locally until GCC 4.5 becomes C99 compliant
+APP_CFLAGS += -I.
+
+# Compile these in thumb mode (small size)
THUMBSRC = start.c \
$(SRC_LCD) \
$(SRC_ISO15693) \
$(SRC_LF) \
+ $(SRC_ZLIB) \
appmain.c \
printf.c \
util.c \
legic_prng.c \
iclass.c \
BigBuf.c \
- cipher.c \
- cipherutils.c\
-
-# stdint.h provided locally until GCC 4.5 becomes C99 compliant
-APP_CFLAGS += -I.
+ optimized_cipher.c
# Do not move this inclusion before the definition of {THUMB,ASM,ARM}SRC
include ../common/Makefile.common
-OBJS = $(OBJDIR)/osimage.s19 $(OBJDIR)/fpgaimage.s19
+OBJS = $(OBJDIR)/fullimage.s19
+FPGA_COMPRESSOR = ../client/fpga_compress
all: $(OBJS)
-$(OBJDIR)/fpga_lf.o: fpga_lf.bit
- $(OBJCOPY) -O elf32-littlearm -I binary -B arm --redefine-sym _binary____fpga_fpga_lf_bit_start=_binary_fpga_lf_bit_start --redefine-sym _binary____fpga_fpga_lf_bit_end=_binary_fpga_lf_bit_end --prefix-sections=fpga_lf_bit $^ $@
+$(OBJDIR)/fpga_all.o: $(OBJDIR)/fpga_all.bit.z
+ $(OBJCOPY) -O elf32-littlearm -I binary -B arm --prefix-sections=fpga_all_bit $^ $@
-$(OBJDIR)/fpga_hf.o: fpga_hf.bit
- $(OBJCOPY) -O elf32-littlearm -I binary -B arm --redefine-sym _binary____fpga_fpga_hf_bit_start=_binary_fpga_hf_bit_start --redefine-sym _binary____fpga_fpga_hf_bit_end=_binary_fpga_hf_bit_end --prefix-sections=fpga_hf_bit $^ $@
+$(OBJDIR)/fpga_all.bit.z: $(FPGA_BITSTREAMS) $(FPGA_COMPRESSOR)
+ $(FPGA_COMPRESSOR) $(filter %.bit,$^) $@
-$(OBJDIR)/fullimage.elf: $(VERSIONOBJ) $(OBJDIR)/fpga_lf.o $(OBJDIR)/fpga_hf.o $(THUMBOBJ) $(ARMOBJ)
+$(FPGA_COMPRESSOR):
+ make -C ../client $(notdir $(FPGA_COMPRESSOR))
+
+$(OBJDIR)/fullimage.stage1.elf: $(VERSIONOBJ) $(OBJDIR)/fpga_all.o $(THUMBOBJ) $(ARMOBJ)
$(CC) $(LDFLAGS) -Wl,-T,ldscript,-Map,$(patsubst %.elf,%.map,$@) -o $@ $^ $(LIBS)
-$(OBJDIR)/fpgaimage.elf: $(OBJDIR)/fullimage.elf
- $(OBJCOPY) -F elf32-littlearm --only-section .fpgaimage $^ $@
+$(OBJDIR)/fullimage.nodata.bin: $(OBJDIR)/fullimage.stage1.elf
+ $(OBJCOPY) -O binary -I elf32-littlearm --remove-section .data $^ $@
+
+$(OBJDIR)/fullimage.nodata.o: $(OBJDIR)/fullimage.nodata.bin
+ $(OBJCOPY) -O elf32-littlearm -I binary -B arm --rename-section .data=stage1_image $^ $@
-$(OBJDIR)/osimage.elf: $(OBJDIR)/fullimage.elf
- $(OBJCOPY) -F elf32-littlearm --remove-section .fpgaimage $^ $@
+$(OBJDIR)/fullimage.data.bin: $(OBJDIR)/fullimage.stage1.elf
+ $(OBJCOPY) -O binary -I elf32-littlearm --only-section .data $^ $@
+$(OBJDIR)/fullimage.data.bin.z: $(OBJDIR)/fullimage.data.bin $(FPGA_COMPRESSOR)
+ $(FPGA_COMPRESSOR) $(filter %.bin,$^) $@
+
+$(OBJDIR)/fullimage.data.o: $(OBJDIR)/fullimage.data.bin.z
+ $(OBJCOPY) -O elf32-littlearm -I binary -B arm --rename-section .data=compressed_data $^ $@
+
+$(OBJDIR)/fullimage.elf: $(OBJDIR)/fullimage.nodata.o $(OBJDIR)/fullimage.data.o
+ $(CC) $(LDFLAGS) -Wl,-T,ldscript,-Map,$(patsubst %.elf,%.map,$@) -o $@ $^
+
tarbin: $(OBJS)
$(TAR) $(TARFLAGS) ../proxmark3-$(platform)-bin.tar $(OBJS:%=armsrc/%) $(OBJS:%.s19=armsrc/%.elf)
-
clean:
$(DELETE) $(OBJDIR)$(PATHSEP)*.o
$(DELETE) $(OBJDIR)$(PATHSEP)*.elf
$(DELETE) $(OBJDIR)$(PATHSEP)*.s19
$(DELETE) $(OBJDIR)$(PATHSEP)*.map
$(DELETE) $(OBJDIR)$(PATHSEP)*.d
+ $(DELETE) $(OBJDIR)$(PATHSEP)*.z
+ $(DELETE) $(OBJDIR)$(PATHSEP)*.bin
$(DELETE) version.c
.PHONY: all clean help
help:
@echo Multi-OS Makefile, you are running on $(DETECTED_OS)
@echo Possible targets:
- @echo + all - Make both:
- @echo + $(OBJDIR)/osimage.s19 - The OS image
- @echo + $(OBJDIR)/fpgaimage.s19 - The FPGA image
- @echo + clean - Clean $(OBJDIR)
+ @echo + all - Build the full image $(OBJDIR)/fullimage.s19
+ @echo + clean - Clean $(OBJDIR)