// different initial value (CRC_ICLASS)
#include "iso14443crc.h"
#include "iso15693tools.h"
-#include "cipher.h"
#include "protocols.h"
+#include "optimized_cipher.h"
+
static int timeout = 4096;
Dbprintf("Done...");
}
+void AppendCrc(uint8_t* data, int len)
+{
+ ComputeCrc14443(CRC_ICLASS,data,len,data+len,data+len+1);
+}
/**
* @brief Does the actual simulation
// free eventually allocated BigBuf memory
BigBuf_free_keep_EM();
+ State cipher_state;
+// State cipher_state_reserve;
uint8_t *csn = BigBuf_get_EM_addr();
uint8_t *emulator = csn;
uint8_t sof_data[] = { 0x0F} ;
ComputeCrc14443(CRC_ICLASS, anticoll_data, 8, &anticoll_data[8], &anticoll_data[9]);
ComputeCrc14443(CRC_ICLASS, csn_data, 8, &csn_data[8], &csn_data[9]);
+ uint8_t diversified_key[8] = { 0 };
// e-Purse
uint8_t card_challenge_data[8] = { 0x00 };
if(simulationMode == MODE_FULLSIM)
{
+ //The diversified key should be stored on block 3
+ //Get the diversified key from emulator memory
+ memcpy(diversified_key, emulator+(8*3),8);
+
//Card challenge, a.k.a e-purse is on block 2
memcpy(card_challenge_data,emulator + (8 * 2) , 8);
+ //Precalculate the cipher state, feeding it the CC
+ cipher_state = opt_doTagMAC_1(card_challenge_data,diversified_key);
+
}
int exitLoop = 0;
// Tag CSN
uint8_t *modulated_response;
- int modulated_response_size;
+ int modulated_response_size = 0;
uint8_t* trace_data = NULL;
int trace_data_size = 0;
int resp_cc_len;
uint8_t *receivedCmd = BigBuf_malloc(MAX_FRAME_SIZE);
- memset(receivedCmd, 0x44, MAX_FRAME_SIZE);
int len;
// Prepare card messages
CodeIClassTagAnswer(card_challenge_data, sizeof(card_challenge_data));
memcpy(resp_cc, ToSend, ToSendMax); resp_cc_len = ToSendMax;
- //This is used for responding to READ-block commands
- uint8_t *data_response = BigBuf_malloc(8 * 2 + 2);
+ //This is used for responding to READ-block commands or other data which is dynamically generated
+ //First the 'trace'-data, not encoded for FPGA
+ uint8_t *data_generic_trace = BigBuf_malloc(8 + 2);//8 bytes data + 2byte CRC is max tag answer
+ //Then storage for the modulated data
+ //Each bit is doubled when modulated for FPGA, and we also have SOF and EOF (2 bytes)
+ uint8_t *data_response = BigBuf_malloc( (8+2) * 2 + 2);
// Start from off (no field generated)
//FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
LED_A_ON();
bool buttonPressed = false;
-
+ uint8_t response_delay = 1;
while(!exitLoop) {
-
+ response_delay = 1;
LED_B_OFF();
//Signal tracer
// Can be used to get a trigger for an oscilloscope..
} else if(receivedCmd[0] == ICLASS_CMD_CHECK) {
// Reader random and reader MAC!!!
if(simulationMode == MODE_FULLSIM)
- { //This is what we must do..
- //Reader just sent us NR and MAC(k,cc * nr)
- //The diversified key should be stored on block 3
- //However, from a typical dump, the key will not be there
- uint8_t *diversified_key = { 0 };
- //Get the diversified key from emulator memory
- memcpy(diversified_key, emulator+(8*3),8);
- uint8_t ccnr[12] = { 0 };
- //Put our cc there (block 2)
- memcpy(ccnr, emulator + (8 * 2), 8);
- //Put nr there
- memcpy(ccnr+8, receivedCmd+1,4);
- //Now, calc MAC
- doMAC(ccnr,diversified_key, trace_data);
+ {
+ //NR, from reader, is in receivedCmd +1
+ opt_doTagMAC_2(cipher_state,receivedCmd+1,data_generic_trace,diversified_key);
+
+ trace_data = data_generic_trace;
trace_data_size = 4;
CodeIClassTagAnswer(trace_data , trace_data_size);
memcpy(data_response, ToSend, ToSendMax);
modulated_response = data_response;
modulated_response_size = ToSendMax;
+ response_delay = 0;//We need to hurry here...
+ //exitLoop = true;
}else
{ //Not fullsim, we don't respond
// We do not know what to answer, so lets keep quiet
} else if(simulationMode == MODE_FULLSIM && receivedCmd[0] == ICLASS_CMD_READ_OR_IDENTIFY && len == 4){
//Read block
uint16_t blk = receivedCmd[1];
- trace_data = emulator+(blk << 3);
- trace_data_size = 8;
+ //Take the data...
+ memcpy(data_generic_trace, emulator+(blk << 3),8);
+ //Add crc
+ AppendCrc(data_generic_trace, 8);
+ trace_data = data_generic_trace;
+ trace_data_size = 10;
CodeIClassTagAnswer(trace_data , trace_data_size);
memcpy(data_response, ToSend, ToSendMax);
modulated_response = data_response;
modulated_response_size = ToSendMax;
+ }else if(receivedCmd[0] == ICLASS_CMD_UPDATE && simulationMode == MODE_FULLSIM)
+ {//Probably the reader wants to update the nonce. Let's just ignore that for now.
+ // OBS! If this is implemented, don't forget to regenerate the cipher_state
+ //We're expected to respond with the data+crc, exactly what's already in the receivedcmd
+ //receivedcmd is now UPDATE 1b | ADDRESS 1b| DATA 8b| Signature 4b or CRC 2b|
+
+ //Take the data...
+ memcpy(data_generic_trace, receivedCmd+2,8);
+ //Add crc
+ AppendCrc(data_generic_trace, 8);
+ trace_data = data_generic_trace;
+ trace_data_size = 10;
+ CodeIClassTagAnswer(trace_data , trace_data_size);
+ memcpy(data_response, ToSend, ToSendMax);
+ modulated_response = data_response;
+ modulated_response_size = ToSendMax;
+ }
+ else if(receivedCmd[0] == ICLASS_CMD_PAGESEL)
+ {//Pagesel
+ //Pagesel enables to select a page in the selected chip memory and return its configuration block
+ //Chips with a single page will not answer to this command
+ // It appears we're fine ignoring this.
+ //Otherwise, we should answer 8bytes (block) + 2bytes CRC
}
else {
//#db# Unknown command received from reader (len=5): 26 1 0 f6 a 44 44 44 44
A legit tag has about 380us delay between reader EOT and tag SOF.
**/
if(modulated_response_size > 0) {
- SendIClassAnswer(modulated_response, modulated_response_size, 1);
+ SendIClassAnswer(modulated_response, modulated_response_size, response_delay);
t2r_time = GetCountSspClk();
}
}
}
- memset(receivedCmd, 0x44, MAX_FRAME_SIZE);
}
//Dbprintf("%x", cmdsRecvd);
static uint8_t act_all[] = { 0x0a };
static uint8_t identify[] = { 0x0c };
static uint8_t select[] = { 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
- static uint8_t readcheck_cc[]= { 0x88, 0x02 };
+
+
+ static uint8_t readcheck_cc[]= { 0x88, 0x02,};
+
uint8_t resp[ICLASS_BUFFER_SIZE];
uint8_t read_status = 0;
if(ReaderReceiveIClass(resp) == 8) {
//Save CC (e-purse) in response data
memcpy(card_data+8,resp,8);
-
- //Got both
- read_status = 2;
+ read_status++;
}
return read_status;
}
+
// Reader iClass Anticollission
void ReaderIClass(uint8_t arg0) {
- uint8_t card_data[24]={0};
- uint8_t last_csn[8]={0};
+ uint8_t card_data[6 * 8]={0};
+ memset(card_data, 0xFF, sizeof(card_data));
+ uint8_t last_csn[8]={0};
- int read_status= 0;
- bool abort_after_read = arg0 & FLAG_ICLASS_READER_ONLY_ONCE;
- bool get_cc = arg0 & FLAG_ICLASS_READER_GET_CC;
- set_tracing(TRUE);
- setupIclassReader();
+ //Read conf block CRC(0x01) => 0xfa 0x22
+ uint8_t readConf[] = { ICLASS_CMD_READ_OR_IDENTIFY,0x01, 0xfa, 0x22};
+ //Read conf block CRC(0x05) => 0xde 0x64
+ uint8_t readAA[] = { ICLASS_CMD_READ_OR_IDENTIFY,0x05, 0xde, 0x64};
- size_t datasize = 0;
- while(!BUTTON_PRESS())
- {
+ int read_status= 0;
+ uint8_t result_status = 0;
+ bool abort_after_read = arg0 & FLAG_ICLASS_READER_ONLY_ONCE;
+ bool try_once = arg0 & FLAG_ICLASS_READER_ONE_TRY;
+ set_tracing(TRUE);
+ setupIclassReader();
+
+ uint16_t tryCnt=0;
+ while(!BUTTON_PRESS())
+ {
+ if (try_once && tryCnt > 5) break;
+ tryCnt++;
if(!tracing) {
DbpString("Trace full");
break;
read_status = handshakeIclassTag(card_data);
if(read_status == 0) continue;
- if(read_status == 1) datasize = 8;
- if(read_status == 2) datasize = 16;
+ if(read_status == 1) result_status = FLAG_ICLASS_READER_CSN;
+ if(read_status == 2) result_status = FLAG_ICLASS_READER_CSN|FLAG_ICLASS_READER_CC;
+
+ // handshakeIclass returns CSN|CC, but the actual block
+ // layout is CSN|CONFIG|CC, so here we reorder the data,
+ // moving CC forward 8 bytes
+ memcpy(card_data+16,card_data+8, 8);
+ //Read block 1, config
+ if(arg0 & FLAG_ICLASS_READER_CONF)
+ {
+ if(sendCmdGetResponseWithRetries(readConf, sizeof(readConf),card_data+8, 10, 10))
+ {
+ Dbprintf("Failed to dump config block");
+ }else
+ {
+ result_status |= FLAG_ICLASS_READER_CONF;
+ }
+ }
- //Todo, read the public blocks 1,5 aswell:
- //
- // 0 : CSN (we already have)
+ //Read block 5, AA
+ if(arg0 & FLAG_ICLASS_READER_AA){
+ if(sendCmdGetResponseWithRetries(readAA, sizeof(readAA),card_data+(8*4), 10, 10))
+ {
+// Dbprintf("Failed to dump AA block");
+ }else
+ {
+ result_status |= FLAG_ICLASS_READER_AA;
+ }
+ }
+
+ // 0 : CSN
// 1 : Configuration
- // 2 : e-purse (we already have)
- // (3,4 write-only)
+ // 2 : e-purse
+ // (3,4 write-only, kc and kd)
// 5 Application issuer area
//
//Then we can 'ship' back the 8 * 5 bytes of data,
//Send back to client, but don't bother if we already sent this
if(memcmp(last_csn, card_data, 8) != 0)
{
-
- if(!get_cc || (get_cc && read_status == 2))
+ // If caller requires that we get CC, continue until we got it
+ if( (arg0 & read_status & FLAG_ICLASS_READER_CC) || !(arg0 & FLAG_ICLASS_READER_CC))
{
- cmd_send(CMD_ACK,read_status,0,0,card_data,datasize);
+ cmd_send(CMD_ACK,result_status,0,0,card_data,sizeof(card_data));
if(abort_after_read) {
LED_A_OFF();
return;
//Save that we already sent this....
memcpy(last_csn, card_data, 8);
}
- //If 'get_cc' was specified and we didn't get a CC, we'll just keep trying...
+
}
LED_B_OFF();
- }
+ }
cmd_send(CMD_ACK,0,0,0,card_data, 0);
LED_A_OFF();
}
projects / proxmark3-svn / blobdiff