add lf em 4x05protect plus lf config s option (#833)

[proxmark3-svn] / armsrc / lfops.c

diff --git a/armsrc/lfops.c b/armsrc/lfops.c
index 81fdd7a66c5cb8c1169af608624f0d45ab23d66d..ed207dbb39122eb4bc13f2f27828dca820f77c06 100644 (file)
--- a/armsrc/lfops.c
+++ b/armsrc/lfops.c
@@ -1198,10 +1198,45 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
  * and enlarge the gap ones.
  * Q5 tags seems to have issues when these values changes. 
  */
-#define START_GAP 31*8 // was 250 // SPEC:  1*8 to 50*8 - typ 15*8 (or 15fc)
-#define WRITE_GAP 20*8 // was 160 // SPEC:  1*8 to 20*8 - typ 10*8 (or 10fc)
-#define WRITE_0   18*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (or 24fc)
-#define WRITE_1   50*8 // was 400 // SPEC: 48*8 to 64*8 - typ 56*8 (or 56fc)  432 for T55x7; 448 for E5550
+
+/* Q5 timing datasheet:
+ * Type                  |  MIN   | Typical |  Max   |
+ * Start_Gap             |  10*8  |    ?    |  50*8  |
+ * Write_Gap Normal mode |   8*8  |   14*8  |  20*8  | 
+ * Write_Gap Fast Mode   |   8*8  |    ?    |  20*8  |
+ * Write_0   Normal mode |  16*8  |   24*8  |  32*8  |
+ * Write_1   Normal mode |  48*8  |   56*8  |  64*8  |
+ * Write_0   Fast Mode   |   8*8  |   12*8  |  16*8  |
+ * Write_1   Fast Mode   |  24*8  |   28*8  |  32*8  |
+*/
+
+/* T5557 timing datasheet:
+ * Type                  |  MIN   | Typical |  Max   |
+ * Start_Gap             |  10*8  |    ?    |  50*8  |
+ * Write_Gap Normal mode |   8*8  |50-150us |  30*8  | 
+ * Write_Gap Fast Mode   |   8*8  |    ?    |  20*8  |
+ * Write_0   Normal mode |  16*8  |   24*8  |  31*8  | 
+ * Write_1   Normal mode |  48*8  |   54*8  |  63*8  | 
+ * Write_0   Fast Mode   |   8*8  |   12*8  |  15*8  |
+ * Write_1   Fast Mode   |  24*8  |   28*8  |  31*8  |
+*/
+
+/* T5577C timing datasheet for Fixed-Bit-Length protocol (defualt):
+ * Type                  |  MIN   | Typical |  Max   |
+ * Start_Gap             |   8*8  |   15*8  |  50*8  |
+ * Write_Gap Normal mode |   8*8  |   10*8  |  20*8  | 
+ * Write_Gap Fast Mode   |   8*8  |   10*8  |  20*8  |
+ * Write_0   Normal mode |  16*8  |   24*8  |  32*8  | 
+ * Write_1   Normal mode |  48*8  |   56*8  |  64*8  | 
+ * Write_0   Fast Mode   |   8*8  |   12*8  |  16*8  |
+ * Write_1   Fast Mode   |  24*8  |   28*8  |  32*8  |
+*/
+
+//note startgap must be sent after tag has been powered up for more than 3ms (per T5557 ds)
+#define START_GAP 31*8 //31*8 // was 250 // SPEC:  1*8 to 50*8 - typ 15*8 (or 15fc) - T5557: 10*8 to 50*8 
+#define WRITE_GAP 20*8 //20*8 // was 160 // SPEC:  1*8 to 20*8 - typ 10*8 (or 10fc) - T5557:  8*8 to 30*8 typ 50-150us
+#define WRITE_0   18*8 //18*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (or 24fc) - T5557: 16*8 to 31*8 typ 24*8
+#define WRITE_1   50*8 //50*8 // was 400 // SPEC: 48*8 to 64*8 - typ 56*8 (or 56fc) - T5557: 48*8 to 63*8 typ 54*8       432 for T55x7; 448 for E5550
 #define READ_GAP  15*8 
 
 void TurnReadLFOn(int delay) {
@@ -1355,7 +1390,7 @@ void T55xxReadBlock(uint16_t arg0, uint8_t Block, uint32_t Pwd) {
        T55xxWriteBit(1);
        T55xxWriteBit(Page); //Page 0
 
-       if (PwdMode){
+       if (PwdMode) {
                // Send Pwd
                for (i = 0x80000000; i != 0; i >>= 1)
                        T55xxWriteBit(Pwd & i);
@@ -1614,6 +1649,7 @@ void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo) {
 #define FWD_CMD_WRITE 0xA
 #define FWD_CMD_READ 0x9
 #define FWD_CMD_DISABLE 0x5
+#define FWD_CMD_PROTECT 0x3
 
 uint8_t forwardLink_data[64]; //array of forwarded bits
 uint8_t * forward_ptr; //ptr for forward message preparation
@@ -1783,7 +1819,7 @@ void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
 
 void EM4xWriteWord(uint32_t flag, uint32_t Data, uint32_t Pwd) {
        
-       bool PwdMode = (flag & 0xF);
+       bool PwdMode = (flag & 0x1);
        uint8_t Address = (flag >> 8) & 0xFF;
        uint8_t fwd_bit_count;
 
@@ -1813,6 +1849,39 @@ void EM4xWriteWord(uint32_t flag, uint32_t Data, uint32_t Pwd) {
        LED_A_OFF();
        cmd_send(CMD_ACK,0,0,0,0,0);
 }
+
+void EM4xProtect(uint32_t flag, uint32_t Data, uint32_t Pwd) {
+       
+       bool PwdMode = (flag & 0x1);
+       uint8_t fwd_bit_count;
+
+       //clear buffer now so it does not interfere with timing later
+       BigBuf_Clear_ext(false);
+
+       LED_A_ON();
+       StartTicks();
+       //If password mode do login
+       if (PwdMode) EM4xLogin(Pwd);
+
+       forward_ptr = forwardLink_data;
+       fwd_bit_count = Prepare_Cmd( FWD_CMD_PROTECT );
+
+       //unsure if this needs the full packet config...
+       fwd_bit_count += Prepare_Data( Data&0xFFFF, Data>>16 );
+
+       SendForward(fwd_bit_count);
+
+       //Wait for write to complete
+       //SpinDelay(10);
+
+       WaitUS(6500);
+       //Capture response if one exists
+       DoPartialAcquisition(20, true, 6000, 1000);
+
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+       LED_A_OFF();
+       cmd_send(CMD_ACK,0,0,0,0,0);
+}
 /*
 Reading a COTAG.