+ uint8_t simType = 0;
+ uint8_t CSN[8] = {0, 0, 0, 0, 0, 0, 0, 0};
+
+ if (strlen(Cmd)<1) {
+ return usage_hf_iclass_sim();
+ }
+ simType = param_get8ex(Cmd, 0, 0, 10);
+
+ if(simType == 0)
+ {
+ if (param_gethex(Cmd, 1, CSN, 16)) {
+ PrintAndLog("A CSN should consist of 16 HEX symbols");
+ return usage_hf_iclass_sim();
+ }
+
+ PrintAndLog("--simtype:%02x csn:%s", simType, sprint_hex(CSN, 8));
+ }
+ if(simType > 3)
+ {
+ PrintAndLog("Undefined simptype %d", simType);
+ return usage_hf_iclass_sim();
+ }
+
+ uint8_t numberOfCSNs=0;
+ if(simType == 2)
+ {
+ UsbCommand c = {CMD_SIMULATE_TAG_ICLASS, {simType,NUM_CSNS}};
+ UsbCommand resp = {0};
+
+ uint8_t csns[8*NUM_CSNS] = {
+ 0x00, 0x0B, 0x0F, 0xFF, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x04, 0x0E, 0x08, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x09, 0x0D, 0x05, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x0A, 0x0C, 0x06, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x0F, 0x0B, 0x03, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x08, 0x0A, 0x0C, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x0D, 0x09, 0x09, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x0E, 0x08, 0x0A, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x03, 0x07, 0x17, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x3C, 0x06, 0xE0, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x01, 0x05, 0x1D, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x02, 0x04, 0x1E, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x07, 0x03, 0x1B, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x00, 0x02, 0x24, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x05, 0x01, 0x21, 0xF7, 0xFF, 0x12, 0xE0 };
+
+ memcpy(c.d.asBytes, csns, 8*NUM_CSNS);
+
+ SendCommand(&c);
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, -1)) {
+ PrintAndLog("Command timed out");
+ return 0;
+ }
+
+ uint8_t num_mac_responses = resp.arg[1];
+ PrintAndLog("Mac responses: %d MACs obtained (should be %d)", num_mac_responses,NUM_CSNS);
+
+ size_t datalen = NUM_CSNS*24;
+ /*
+ * Now, time to dump to file. We'll use this format:
+ * <8-byte CSN><8-byte CC><4 byte NR><4 byte MAC>....
+ * So, it should wind up as
+ * 8 * 24 bytes.
+ *
+ * The returndata from the pm3 is on the following format
+ * <4 byte NR><4 byte MAC>
+ * CC are all zeroes, CSN is the same as was sent in
+ **/
+ void* dump = malloc(datalen);
+ memset(dump,0,datalen);//<-- Need zeroes for the CC-field
+ uint8_t i = 0;
+ for(i = 0 ; i < NUM_CSNS ; i++)
+ {
+ memcpy(dump+i*24, csns+i*8,8); //CSN
+ //8 zero bytes here...
+ //Then comes NR_MAC (eight bytes from the response)
+ memcpy(dump+i*24+16,resp.d.asBytes+i*8,8);
+
+ }
+ /** Now, save to dumpfile **/
+ saveFile("iclass_mac_attack", "bin", dump,datalen);
+ free(dump);
+ }else
+ {
+ UsbCommand c = {CMD_SIMULATE_TAG_ICLASS, {simType,numberOfCSNs}};
+ memcpy(c.d.asBytes, CSN, 8);
+ SendCommand(&c);
+ }
+
+ return 0;
+}
+
+int HFiClassReader(const char *Cmd, bool loop, bool verbose)
+{
+ bool tagFound = false;
+ UsbCommand c = {CMD_READER_ICLASS, {FLAG_ICLASS_READER_CSN|
+ FLAG_ICLASS_READER_CONF|FLAG_ICLASS_READER_AA}};
+ // loop in client not device - else on windows have a communication error
+ c.arg[0] |= FLAG_ICLASS_READER_ONLY_ONCE | FLAG_ICLASS_READER_ONE_TRY;
+ UsbCommand resp;
+ while(!ukbhit()){
+ SendCommand(&c);
+ if (WaitForResponseTimeout(CMD_ACK,&resp, 4500)) {
+ uint8_t readStatus = resp.arg[0] & 0xff;
+ uint8_t *data = resp.d.asBytes;
+
+ if (verbose)
+ PrintAndLog("Readstatus:%02x", readStatus);
+ if( readStatus == 0){
+ //Aborted
+ if (verbose) PrintAndLog("Quitting...");
+ return 0;
+ }
+ if( readStatus & FLAG_ICLASS_READER_CSN){
+ PrintAndLog("CSN: %s",sprint_hex(data,8));
+ tagFound = true;
+ }
+ if( readStatus & FLAG_ICLASS_READER_CC) PrintAndLog("CC: %s",sprint_hex(data+16,8));
+ if( readStatus & FLAG_ICLASS_READER_CONF){
+ printIclassDumpInfo(data);
+ }
+ if (tagFound && !loop) return 1;
+ } else {
+ if (verbose) PrintAndLog("Command execute timeout");
+ }
+ if (!loop) break;
+ }
+ return 0;
+}
+
+int CmdHFiClassReader(const char *Cmd)
+{
+ return HFiClassReader(Cmd, true, true);
+}
+
+int CmdHFiClassReader_Replay(const char *Cmd)
+{
+ uint8_t readerType = 0;
+ uint8_t MAC[4]={0x00, 0x00, 0x00, 0x00};
+
+ if (strlen(Cmd)<1) {
+ PrintAndLog("Usage: hf iclass replay <MAC>");
+ PrintAndLog(" sample: hf iclass replay 00112233");
+ return 0;
+ }
+
+ if (param_gethex(Cmd, 0, MAC, 8)) {
+ PrintAndLog("MAC must include 8 HEX symbols");
+ return 1;
+ }
+
+ UsbCommand c = {CMD_READER_ICLASS_REPLAY, {readerType}};
+ memcpy(c.d.asBytes, MAC, 4);
+ SendCommand(&c);
+
+ return 0;
+}
+
+int hf_iclass_eload_usage()
+{
+ PrintAndLog("Loads iclass tag-dump into emulator memory on device");
+ PrintAndLog("Usage: hf iclass eload f <filename>");
+ PrintAndLog("");
+ PrintAndLog("Example: hf iclass eload f iclass_tagdump-aa162d30f8ff12f1.bin");
+ return 0;
+}
+
+int iclassEmlSetMem(uint8_t *data, int blockNum, int blocksCount) {
+ UsbCommand c = {CMD_MIFARE_EML_MEMSET, {blockNum, blocksCount, 0}};
+ memcpy(c.d.asBytes, data, blocksCount * 16);
+ SendCommand(&c);
+ return 0;
+}
+int CmdHFiClassELoad(const char *Cmd)
+{
+
+ char opt = param_getchar(Cmd, 0);
+ if (strlen(Cmd)<1 || opt == 'h')
+ return hf_iclass_eload_usage();
+
+ //File handling and reading
+ FILE *f;
+ char filename[FILE_PATH_SIZE];
+ if(opt == 'f' && param_getstr(Cmd, 1, filename) > 0)
+ {
+ f = fopen(filename, "rb");
+ }else{
+ return hf_iclass_eload_usage();
+ }
+
+ if(!f) {
+ PrintAndLog("Failed to read from file '%s'", filename);
+ return 1;
+ }
+
+ fseek(f, 0, SEEK_END);
+ long fsize = ftell(f);
+ fseek(f, 0, SEEK_SET);
+
+ uint8_t *dump = malloc(fsize);
+
+
+ size_t bytes_read = fread(dump, 1, fsize, f);
+ fclose(f);
+
+ printIclassDumpInfo(dump);
+ //Validate
+
+ if (bytes_read < fsize)
+ {
+ prnlog("Error, could only read %d bytes (should be %d)",bytes_read, fsize );
+ free(dump);
+ return 1;
+ }
+ //Send to device
+ uint32_t bytes_sent = 0;
+ uint32_t bytes_remaining = bytes_read;
+
+ while(bytes_remaining > 0){
+ uint32_t bytes_in_packet = MIN(USB_CMD_DATA_SIZE, bytes_remaining);
+ UsbCommand c = {CMD_ICLASS_EML_MEMSET, {bytes_sent,bytes_in_packet,0}};
+ memcpy(c.d.asBytes, dump, bytes_in_packet);
+ SendCommand(&c);
+ bytes_remaining -= bytes_in_packet;
+ bytes_sent += bytes_in_packet;
+ }
+ free(dump);
+ PrintAndLog("Sent %d bytes of data to device emulator memory", bytes_sent);
+ return 0;
+}
+
+int readKeyfile(const char *filename, size_t len, uint8_t* buffer)
+{
+ FILE *f = fopen(filename, "rb");
+ if(!f) {
+ PrintAndLog("Failed to read from file '%s'", filename);
+ return 1;
+ }
+ fseek(f, 0, SEEK_END);
+ long fsize = ftell(f);
+ fseek(f, 0, SEEK_SET);
+ size_t bytes_read = fread(buffer, 1, len, f);
+ fclose(f);
+ if(fsize != len)
+ {
+ PrintAndLog("Warning, file size is %d, expected %d", fsize, len);
+ return 1;
+ }
+ if(bytes_read != len)
+ {
+ PrintAndLog("Warning, could only read %d bytes, expected %d" ,bytes_read, len);
+ return 1;
+ }
+ return 0;
+}
+
+int usage_hf_iclass_decrypt()
+{
+ PrintAndLog("Usage: hf iclass decrypt f <tagdump> o ");
+ PrintAndLog("");
+ PrintAndLog("OBS! In order to use this function, the file 'iclass_decryptionkey.bin' must reside");
+ PrintAndLog("in the working directory. The file should be 16 bytes binary data");
+ PrintAndLog("");
+ PrintAndLog("example: hf iclass decrypt f tagdump_12312342343.bin");
+ PrintAndLog("");
+ PrintAndLog("OBS! This is pretty stupid implementation, it tries to decrypt every block after block 6. ");
+ PrintAndLog("Correct behaviour would be to decrypt only the application areas where the key is valid,");
+ PrintAndLog("which is defined by the configuration block.");
+ return 1;
+}
+
+int CmdHFiClassDecrypt(const char *Cmd)
+{
+ uint8_t key[16] = { 0 };
+ if(readKeyfile("iclass_decryptionkey.bin", 16, key))
+ {
+ usage_hf_iclass_decrypt();
+ return 1;
+ }
+ PrintAndLog("Decryption file found... ");
+ char opt = param_getchar(Cmd, 0);
+ if (strlen(Cmd)<1 || opt == 'h')
+ return usage_hf_iclass_decrypt();
+
+ //Open the tagdump-file
+ FILE *f;
+ char filename[FILE_PATH_SIZE];
+ if(opt == 'f' && param_getstr(Cmd, 1, filename) > 0)
+ {
+ f = fopen(filename, "rb");
+ }else{
+ return usage_hf_iclass_decrypt();
+ }
+
+ fseek(f, 0, SEEK_END);
+ long fsize = ftell(f);
+ fseek(f, 0, SEEK_SET);
+ uint8_t enc_dump[8] = {0};
+ uint8_t *decrypted = malloc(fsize);
+ des3_context ctx = { DES_DECRYPT ,{ 0 } };
+ des3_set2key_dec( &ctx, key);
+ size_t bytes_read = fread(enc_dump, 1, 8, f);
+
+ //Use the first block (CSN) for filename
+ char outfilename[FILE_PATH_SIZE] = { 0 };
+ snprintf(outfilename,FILE_PATH_SIZE,"iclass_tagdump-%02x%02x%02x%02x%02x%02x%02x%02x-decrypted",
+ enc_dump[0],enc_dump[1],enc_dump[2],enc_dump[3],
+ enc_dump[4],enc_dump[5],enc_dump[6],enc_dump[7]);
+
+ size_t blocknum =0;
+ while(bytes_read == 8)
+ {
+ if(blocknum < 7)
+ {
+ memcpy(decrypted+(blocknum*8), enc_dump, 8);
+ }else{
+ des3_crypt_ecb(&ctx, enc_dump,decrypted +(blocknum*8) );
+ }
+ printvar("decrypted block", decrypted +(blocknum*8), 8);
+ bytes_read = fread(enc_dump, 1, 8, f);
+ blocknum++;
+ }
+ fclose(f);
+
+ saveFile(outfilename,"bin", decrypted, blocknum*8);
+
+ return 0;
+}
+
+int usage_hf_iclass_encrypt(){
+ PrintAndLog("Usage: hf iclass encrypt <BlockData>");
+ PrintAndLog("");
+ PrintAndLog("OBS! In order to use this function, the file 'iclass_decryptionkey.bin' must reside");
+ PrintAndLog("in the working directory. The file should be 16 bytes binary data");
+ PrintAndLog("");
+ PrintAndLog("example: hf iclass encrypt 0102030405060708");
+ PrintAndLog("");
+ return 0;
+}
+
+int iClassEncryptBlkData(uint8_t *blkData)
+{
+ uint8_t key[16] = { 0 };
+ if(readKeyfile("iclass_decryptionkey.bin", 16, key))
+ {
+ usage_hf_iclass_encrypt();
+ return 1;
+ }
+ PrintAndLog("Decryption file found... ");
+
+ uint8_t decryptedData[16];
+ uint8_t *decrypted = decryptedData;
+ des3_context ctx = { DES_DECRYPT ,{ 0 } };
+ des3_set2key_enc( &ctx, key);
+
+ des3_crypt_ecb(&ctx, blkData,decrypted);
+ //printvar("decrypted block", decrypted, 8);
+ memcpy(blkData,decrypted,8);
+
+ return 1;
+}
+
+int CmdHFiClassEncryptBlk(const char *Cmd)
+{
+ uint8_t blkData[8] = {0};
+ char opt = param_getchar(Cmd, 0);
+ if (strlen(Cmd)<1 || opt == 'h')
+ return usage_hf_iclass_encrypt();
+
+ //get the bytes to encrypt
+ if (param_gethex(Cmd, 0, blkData, 16))
+ {
+ PrintAndLog("BlockData must include 16 HEX symbols");
+ return 0;
+ }
+ if (!iClassEncryptBlkData(blkData)) return 0;
+
+ printvar("encrypted block", blkData, 8);
+ return 1;
+}
+
+void Calc_wb_mac(uint8_t blockno,uint8_t *data,uint8_t *div_key,uint8_t MAC[4]){
+ uint8_t WB[9];
+ WB[0] = blockno;
+ memcpy(WB + 1,data,8);
+ doMAC_N(WB,sizeof(WB),div_key,MAC);
+ //printf("Cal wb mac block [%02x][%02x%02x%02x%02x%02x%02x%02x%02x] : MAC [%02x%02x%02x%02x]",WB[0],WB[1],WB[2],WB[3],WB[4],WB[5],WB[6],WB[7],WB[8],MAC[0],MAC[1],MAC[2],MAC[3]);
+}
+
+static bool select_only(uint8_t *CSN, uint8_t *CCNR, bool use_credit_key, bool verbose){
+ UsbCommand resp;
+
+ UsbCommand c = {CMD_READER_ICLASS, {0}};
+ c.arg[0] = FLAG_ICLASS_READER_ONLY_ONCE| FLAG_ICLASS_READER_CC;
+ if (use_credit_key)
+ c.arg[0] |= FLAG_ICLASS_READER_CEDITKEY;
+
+ clearCommandBuffer();
+ SendCommand(&c);
+ if (!WaitForResponseTimeout(CMD_ACK,&resp,4500))
+ {
+ PrintAndLog("Command execute timeout");
+ return false;
+ }
+
+ uint8_t isOK = resp.arg[0] & 0xff;
+ uint8_t *data = resp.d.asBytes;
+
+ memcpy(CSN,data,8);
+ if (CCNR!=NULL)memcpy(CCNR,data+16,8);
+ //PrintAndLog("isOk:%02x", isOK);
+ if(isOK > 0)
+ {
+ if (verbose) PrintAndLog("CSN: %s",sprint_hex(CSN,8));
+ }
+ if(isOK <= 1){
+ PrintAndLog("Failed to obtain CC! Aborting");
+ return false;
+ }
+ return true;
+}
+
+static bool select_and_auth(uint8_t *KEY, uint8_t *MAC, uint8_t *div_key, bool use_credit_key, bool elite, bool verbose) {
+ uint8_t CSN[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t CCNR[12]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t keytable[128] = {0};
+ uint8_t *used_key;
+ uint8_t key_sel[8] = {0};
+ uint8_t key_sel_p[8] = { 0 };