Fix viking demod bug - clean my indala demod code

[proxmark3-svn] / CHANGELOG.md

diff --git a/CHANGELOG.md b/CHANGELOG.md
index c5ccc8f751a1c28176dd7382c64c2966b9a861c0..a3a0799ecf37928618e879cc5525069d606baabf 100644 (file)
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -5,6 +5,11 @@ This project uses the changelog in accordance with [keepchangelog](http://keepac
 ## [unreleased][unreleased]
 
 ### Added
 ## [unreleased][unreleased]
 
 ### Added

+- Added viking demod to `lf search` (marshmellow)
+- `data askvikingdemod` demod viking id tag from graphbuffer (marshmellow)
+- `lf t55xx resetread` added reset then read command - should allow determining start
+of stream transmissions (marshmellow)
+- `lf t55xx wakeup` added wake with password (AOR) to allow lf search or standard lf read after (iceman, marshmellow)

 - `hf iclass managekeys` to save, load and manage iclass keys.  (adjusted most commands to accept a loaded key in memory) (marshmellow)
 - `hf iclass readblk` to select, authenticate, and read 1 block from an iclass card (marshmellow)
 - `hf iclass writeblk` to select, authenticate, and write 1 block to an iclass card (or picopass) (marshmellow + others)
 - `hf iclass managekeys` to save, load and manage iclass keys.  (adjusted most commands to accept a loaded key in memory) (marshmellow)
 - `hf iclass readblk` to select, authenticate, and read 1 block from an iclass card (marshmellow)
 - `hf iclass writeblk` to select, authenticate, and write 1 block to an iclass card (or picopass) (marshmellow + others)


@@ -16,14 +21,21 @@ This project uses the changelog in accordance with [keepchangelog](http://keepac
 - Added 'hw status'. This command makes the ARM print out some runtime information. (holiman) 
 - Added 'hw ping'. This command just sends a usb packets and checks if the pm3 is responsive. Can be used to abort certain operations which supports abort over usb. (holiman)
 - Added `data hex2bin` and `data bin2hex` for command line conversion between binary and hexadecimal (holiman)
 - Added 'hw status'. This command makes the ARM print out some runtime information. (holiman) 
 - Added 'hw ping'. This command just sends a usb packets and checks if the pm3 is responsive. Can be used to abort certain operations which supports abort over usb. (holiman)
 - Added `data hex2bin` and `data bin2hex` for command line conversion between binary and hexadecimal (holiman)

+- Added 'hf snoop'. This command take digitalized signal from FPGA and put in BigBuffer. (pwpiwi + enio)
+- Added Topaz (NFC type 1) protocol support ('hf topaz reader', 'hf list topaz', 'hf 14a raw -T', 'hf topaz snoop'). (piwi)
+- Added option c to 'hf list' (mark CRC bytes) (piwi)

 
 ### Changed
 
 ### Changed

-<<<<<<< HEAD
+- Adjusted lf em410x em410xsim to accept a clock argument
+- Adjusted lf t55xx dump to allow overriding the safety check and warning text (marshmellow)
+- Adjusted lf t55xx write input variables (marshmellow)
+- Adjusted lf t55xx read with password safety check and warning text and adjusted the input variables (marshmellow & iceman)
+- Adjusted LF FSK demod to account for cross threshold fluctuations (898 count waves will adjust the 9 to 8 now...) more accurate.
+- Adjusted timings for t55xx commands.  more reliable now. (marshmellow & iceman)
+- `lf cmdread` adjusted input methods and added help text (marshmellow & iceman)

 - changed `lf config t <threshold>` to be 0 - 128 and will trigger on + or - threshold value (marshmellow) 
 - `hf iclass dump` cli options - can now dump AA1 and AA2 with different keys in one run (does not go to muliple pages for the larger tags yet)
 - changed `lf config t <threshold>` to be 0 - 128 and will trigger on + or - threshold value (marshmellow) 
 - `hf iclass dump` cli options - can now dump AA1 and AA2 with different keys in one run (does not go to muliple pages for the larger tags yet)

-=======

 - Revised workflow for StandAloneMode14a (Craig Young)
 - Revised workflow for StandAloneMode14a (Craig Young)

->>>>>>> Proxmark/master

 - EPA functions (`hf epa`) now support both ISO 14443-A and 14443-B cards (frederikmoellers)
 - 'hw version' only talks to ARM at startup, after that the info is cached. (pwpiwi)
 
 - EPA functions (`hf epa`) now support both ISO 14443-A and 14443-B cards (frederikmoellers)
 - 'hw version' only talks to ARM at startup, after that the info is cached. (pwpiwi)