]> git.zerfleddert.de Git - proxmark3-svn/blobdiff - client/cmdlft55xx.c
- Little change to description in client
[proxmark3-svn] / client / cmdlft55xx.c
index d4b72b3279bbbaf0844f0703334c1d016d6c4176..887547248abe6e3945a4f6153bbcd493972d0e93 100644 (file)
@@ -37,7 +37,7 @@ int usage_t55xx_config(){
        PrintAndLog("Options:        ");\r
        PrintAndLog("       h                        This help");\r
        PrintAndLog("       b <8|16|32|40|50|64|100|128>     Set bitrate");\r
-       PrintAndLog("       d <FSK|FSK1|FSK1a|FSK2|FSK2a|ASK|PSK1|PSK2|NZ|BI|BIa>  Set demodulation FSK / ASK / PSK / NZ / Biphase / Biphase A");\r
+       PrintAndLog("       d <FSK|FSK1|FSK1a|FSK2|FSK2a|ASK|PSK1|PSK2|NRZ|BI|BIa>  Set demodulation FSK / ASK / PSK / NRZ / Biphase / Biphase A");\r
        PrintAndLog("       i [1]                            Invert data signal, defaults to normal");\r
        PrintAndLog("       o [offset]                       Set offset, where data should start decode in bitstream");\r
        PrintAndLog("");\r
@@ -50,24 +50,24 @@ int usage_t55xx_config(){
 }\r
 int usage_t55xx_read(){\r
        PrintAndLog("Usage:  lf t55xx read <block> <password>");\r
-    PrintAndLog("     <block>, block number to read. Between 0-7");\r
-    PrintAndLog("     <password>, OPTIONAL password (8 hex characters)");\r
-    PrintAndLog("");\r
+       PrintAndLog("     <block>, block number to read. Between 0-7");\r
+       PrintAndLog("     <password>, OPTIONAL password (8 hex characters)");\r
+       PrintAndLog("");\r
        PrintAndLog("Examples:");\r
-    PrintAndLog("      lf t55xx read 0           - read data from block 0");\r
+       PrintAndLog("      lf t55xx read 0           - read data from block 0");\r
        PrintAndLog("      lf t55xx read 0 feedbeef  - read data from block 0 password feedbeef");\r
        PrintAndLog("");\r
        return 0;\r
 }\r
 int usage_t55xx_write(){\r
        PrintAndLog("Usage:  lf t55xx wr <block> <data> [password]");\r
-    PrintAndLog("     <block>, block number to read. Between 0-7");\r
+       PrintAndLog("     <block>, block number to write. Between 0-7");\r
        PrintAndLog("     <data>,  4 bytes of data to write (8 hex characters)");\r
-    PrintAndLog("     [password], OPTIONAL password 4bytes (8 hex characters)");\r
-    PrintAndLog("");\r
+       PrintAndLog("     [password], OPTIONAL password 4bytes (8 hex characters)");\r
+       PrintAndLog("");\r
        PrintAndLog("Examples:");\r
-    PrintAndLog("      lf t55xx wd 3 11223344           - write 11223344 to block 3");\r
-       PrintAndLog("      lf t55xx wd 3 11223344 feedbeef  - write 11223344 to block 3 password feedbeef");\r
+       PrintAndLog("      lf t55xx wr 3 11223344           - write 11223344 to block 3");\r
+       PrintAndLog("      lf t55xx wr 3 11223344 feedbeef  - write 11223344 to block 3 password feedbeef");\r
        PrintAndLog("");\r
        return 0;\r
 }\r
@@ -242,6 +242,7 @@ int CmdT55xxReadBlock(const char *Cmd) {
                c.d.asBytes[0] = 0x1; \r
        }\r
 \r
+       clearCommandBuffer();\r
        SendCommand(&c);\r
        if ( !WaitForResponseTimeout(CMD_ACK,NULL,2500) ) {\r
                PrintAndLog("command execution time out");\r
@@ -670,6 +671,7 @@ int CmdT55xxWriteBlock(const char *Cmd)
        }\r
        \r
        UsbCommand c = {CMD_T55XX_WRITE_BLOCK, {data, block, 0}};\r
+       UsbCommand resp;\r
        c.d.asBytes[0] = 0x0; \r
 \r
        PrintAndLog("Writing to block: %d  data  : 0x%08X", block, data);\r
@@ -680,7 +682,12 @@ int CmdT55xxWriteBlock(const char *Cmd)
                c.d.asBytes[0] = 0x1; \r
                PrintAndLog("pwd   : 0x%08X", password);\r
        }\r
+       clearCommandBuffer();\r
        SendCommand(&c);\r
+       if (!WaitForResponseTimeout(CMD_ACK, &resp, 1000)){\r
+               PrintAndLog("Error occurred, device did not ACK write operation. (May be due to old firmware)");\r
+               return -1;\r
+       }\r
        return 0;\r
 }\r
 \r
@@ -878,6 +885,7 @@ int AquireData( uint8_t block ){
                // c.d.asBytes[0] = 0x1; \r
        // }\r
 \r
+       clearCommandBuffer();\r
        SendCommand(&c);\r
        if ( !WaitForResponseTimeout(CMD_ACK,NULL,2500) ) {\r
                PrintAndLog("command execution time out");\r
Impressum, Datenschutz