]> git.zerfleddert.de Git - proxmark3-svn/blobdiff - client/cmdhw.c
fix WaitForResponse (without timeout)
[proxmark3-svn] / client / cmdhw.c
index 23b6ce21b5af5cb1ffb87347b0c6320df8908a78..b6a0d11f2bbd27852bd35cf2384de46630563950 100644 (file)
@@ -8,18 +8,20 @@
 // Hardware commands
 //-----------------------------------------------------------------------------
 
+#include "cmdhw.h"
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 #include <limits.h>
 #include "ui.h"
-#include "proxmark3.h"
+#include "comms.h"
 #include "cmdparser.h"
-#include "cmdhw.h"
 #include "cmdmain.h"
 #include "cmddata.h"
 
-/* low-level hardware control */
+
+static uint32_t hw_capabilities = 0;
 
 static int CmdHelp(const char *Cmd);
 
@@ -402,37 +404,39 @@ int CmdTune(const char *Cmd)
     return CmdTuneSamples(Cmd);
 }
 
+bool PM3hasSmartcardSlot(void) {
+       return (hw_capabilities & HAS_SMARTCARD_SLOT);
+}
+
 int CmdVersion(const char *Cmd)
 {
 
        clearCommandBuffer();
        UsbCommand c = {CMD_VERSION};
-       static UsbCommand resp = {0, {0, 0, 0}};
+       UsbCommand resp = {0, {0, 0, 0}};
 
-       if (resp.arg[0] == 0 && resp.arg[1] == 0) { // no cached information available
-               SendCommand(&c);
-               if (WaitForResponseTimeout(CMD_ACK,&resp,1000)) {
-                       PrintAndLog("Prox/RFID mark3 RFID instrument");
-                       PrintAndLog((char*)resp.d.asBytes);
-                       lookupChipID(resp.arg[0], resp.arg[1]);
-               }
-       } else {
-               PrintAndLog("[[[ Cached information ]]]\n");
+       SendCommand(&c);
+       if (WaitForResponseTimeout(CMD_ACK, &resp, 1000)) {
                PrintAndLog("Prox/RFID mark3 RFID instrument");
                PrintAndLog((char*)resp.d.asBytes);
                lookupChipID(resp.arg[0], resp.arg[1]);
-               PrintAndLog("");
+               hw_capabilities = resp.arg[2];
        }
        return 0;
 }
 
 int CmdStatus(const char *Cmd)
 {
+       clearCommandBuffer();
        UsbCommand c = {CMD_STATUS};
        SendCommand(&c);
+       if (!WaitForResponseTimeout(CMD_ACK, &c, 1900)) {
+               PrintAndLog("Status command failed. USB Speed Test timed out");
+       }
        return 0;
 }
 
+
 int CmdPing(const char *Cmd)
 {
        clearCommandBuffer();
@@ -440,7 +444,7 @@ int CmdPing(const char *Cmd)
        UsbCommand c = {CMD_PING};
        SendCommand(&c);
        if (WaitForResponseTimeout(CMD_ACK,&resp,1000)) {
-               PrintAndLog("Ping successfull");
+               PrintAndLog("Ping successful");
        }else{
                PrintAndLog("Ping failed");
        }
@@ -458,7 +462,7 @@ static command_t CommandTable[] =
        {"reset",         CmdReset,       0, "Reset the Proxmark3"},
        {"setlfdivisor",  CmdSetDivisor,  0, "<19 - 255> -- Drive LF antenna at 12Mhz/(divisor+1)"},
        {"setmux",        CmdSetMux,      0, "<loraw|hiraw|lopkd|hipkd> -- Set the ADC mux to a specific value"},
-       {"tune",          CmdTune,        0, "Measure antenna tuning"},
+       {"tune",          CmdTune,        0, "['l'|'h'] -- Measure antenna tuning (option 'l' or 'h' to limit to LF or HF)"},
        {"version",       CmdVersion,     0, "Show version information about the connected Proxmark"},
        {"status",        CmdStatus,      0, "Show runtime status information about the connected Proxmark"},
        {"ping",          CmdPing,        0, "Test if the pm3 is responsive"},
Impressum, Datenschutz