--[[
-These are command definitions. This file should correspond exactly to usb_cmd.h.
+Handle Proxmark USB Commands
--]]
---// For the bootloader
-local _commands = {
- CMD_DEVICE_INFO = 0x0000,
- CMD_SETUP_WRITE = 0x0001,
- CMD_FINISH_WRITE = 0x0003,
- CMD_HARDWARE_RESET = 0x0004,
- CMD_START_FLASH = 0x0005,
- CMD_NACK = 0x00fe,
- CMD_ACK = 0x00ff,
-
- --// For general mucking around
- CMD_DEBUG_PRINT_STRING = 0x0100,
- CMD_DEBUG_PRINT_INTEGERS = 0x0101,
- CMD_DEBUG_PRINT_BYTES = 0x0102,
- CMD_LCD_RESET = 0x0103,
- CMD_LCD = 0x0104,
- CMD_BUFF_CLEAR = 0x0105,
- CMD_READ_MEM = 0x0106,
- CMD_VERSION = 0x0107,
- CMD_STATUS = 0x0108,
- CMD_PING = 0x0109,
- --// For low-frequency tags
- CMD_READ_TI_TYPE = 0x0202,
- CMD_WRITE_TI_TYPE = 0x0203,
- CMD_DOWNLOADED_RAW_BITS_TI_TYPE = 0x0204,
- CMD_ACQUIRE_RAW_ADC_SAMPLES_125K = 0x0205,
- CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K = 0x0206,
- CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K = 0x0207,
- CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K = 0x0208,
- CMD_DOWNLOADED_SIM_SAMPLES_125K = 0x0209,
- CMD_SIMULATE_TAG_125K = 0x020A,
- CMD_HID_DEMOD_FSK = 0x020B,
- CMD_HID_SIM_TAG = 0x020C,
- CMD_SET_LF_DIVISOR = 0x020D,
- CMD_LF_SIMULATE_BIDIR = 0x020E,
- CMD_SET_ADC_MUX = 0x020F,
- CMD_HID_CLONE_TAG = 0x0210,
- CMD_EM410X_WRITE_TAG = 0x0211,
- CMD_INDALA_CLONE_TAG = 0x0212,
- --// for 224 bits UID
- CMD_INDALA_CLONE_TAG_L = 0x0213,
- CMD_T55XX_READ_BLOCK = 0x0214,
- CMD_T55XX_WRITE_BLOCK = 0x0215,
- CMD_T55XX_RESET_READ = 0x0216,
- CMD_PCF7931_READ = 0x0217,
- CMD_EM4X_READ_WORD = 0x0218,
- CMD_EM4X_WRITE_WORD = 0x0219,
- CMD_IO_DEMOD_FSK = 0x021A,
- CMD_IO_CLONE_TAG = 0x021B,
- CMD_EM410X_DEMOD = 0x021c,
- CMD_SET_LF_SAMPLING_CONFIG = 0x021d,
- CMD_FSK_SIM_TAG = 0x021E,
- CMD_ASK_SIM_TAG = 0x021F,
- CMD_PSK_SIM_TAG = 0x0220,
- CMD_AWID_DEMOD_FSK = 0x0221,
- CMD_VIKING_CLONE_TAG = 0x0223,
- CMD_T55XX_WAKEUP = 0x0224,
- CMD_COTAG = 0x0225,
- --/* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */
-
- --// For the 13.56 MHz tags
- CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 = 0x0300,
- CMD_READ_SRI512_TAG = 0x0303,
- CMD_READ_SRIX4K_TAG = 0x0304,
- CMD_READER_ISO_15693 = 0x0310,
- CMD_SIMTAG_ISO_15693 = 0x0311,
- CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693 = 0x0312,
- CMD_ISO_15693_COMMAND = 0x0313,
- CMD_ISO_15693_COMMAND_DONE = 0x0314,
- CMD_ISO_15693_FIND_AFI = 0x0315,
- CMD_ISO_15693_DEBUG = 0x0316,
- CMD_LF_SNOOP_RAW_ADC_SAMPLES = 0x0317,
-
- --// For Hitag2 transponders
- CMD_SNOOP_HITAG = 0x0370,
- CMD_SIMULATE_HITAG = 0x0371,
- CMD_READER_HITAG = 0x0372,
-
- CMD_SIMULATE_TAG_ISO_14443B = 0x0381,
- CMD_SNOOP_ISO_14443B = 0x0382,
- CMD_SNOOP_ISO_14443a = 0x0383,
- CMD_SIMULATE_TAG_ISO_14443a = 0x0384,
- CMD_READER_ISO_14443a = 0x0385,
- CMD_SIMULATE_TAG_LEGIC_RF = 0x0387,
- CMD_READER_LEGIC_RF = 0x0388,
- CMD_WRITER_LEGIC_RF = 0x0389,
- CMD_EPA_PACE_COLLECT_NONCE = 0x038A,
- --//CMD_EPA_ = 0x038B,
-
- CMD_ICLASS_READCHECK = 0x038F,
- CMD_ICLASS_CLONE = 0x0390,
- CMD_ICLASS_DUMP = 0x0391,
- CMD_SNOOP_ICLASS = 0x0392,
- CMD_SIMULATE_TAG_ICLASS = 0x0393,
- CMD_READER_ICLASS = 0x0394,
- CMD_READER_ICLASS_REPLAY = 0x0395,
- CMD_ICLASS_READBLOCK = 0x0396,
- CMD_ICLASS_WRITEBLOCK = 0x0397,
- CMD_ICLASS_EML_MEMSET = 0x0398,
- CMD_ICLASS_AUTHENTICATION = 0x0399,
-
- --// For measurements of the antenna tuning
- CMD_MEASURE_ANTENNA_TUNING = 0x0400,
- CMD_MEASURE_ANTENNA_TUNING_HF = 0x0401,
- CMD_MEASURED_ANTENNA_TUNING = 0x0410,
- CMD_LISTEN_READER_FIELD = 0x0420,
-
- --// For direct FPGA control
- CMD_FPGA_MAJOR_MODE_OFF = 0x0500,
-
- --// For mifare commands
- CMD_MIFARE_SET_DBGMODE = 0x0600,
- CMD_MIFARE_EML_MEMCLR = 0x0601,
- CMD_MIFARE_EML_MEMSET = 0x0602,
- CMD_MIFARE_EML_MEMGET = 0x0603,
- CMD_MIFARE_EML_CARDLOAD = 0x0604,
-
- --// magic chinese card commands
- CMD_MIFARE_CSETBLOCK = 0x0605,
- CMD_MIFARE_CGETBLOCK = 0x0606,
- CMD_MIFARE_CIDENT = 0x0607,
-
- CMD_SIMULATE_MIFARE_CARD = 0x0610,
-
- CMD_READER_MIFARE = 0x0611,
- CMD_MIFARE_NESTED = 0x0612,
-
- CMD_MIFARE_READBL = 0x0620,
- CMD_MIFAREU_READBL = 0x0720,
-
- CMD_MIFARE_READSC = 0x0621,
- CMD_MIFAREU_READCARD = 0x0721,
-
- CMD_MIFARE_WRITEBL = 0x0622,
- CMD_MIFAREU_WRITEBL = 0x0722,
- CMD_MIFAREU_WRITEBL_COMPAT = 0x0723,
-
- CMD_MIFARE_CHKKEYS = 0x0623,
-
- CMD_MIFARE_SNIFFER = 0x0630,
-
- --//ultralightC
- CMD_MIFAREUC_AUTH = 0x0724,
- CMD_MIFAREUC_SETPWD = 0x0727,
- CMD_MIFAREU_SETUID = 0x0728,
-
- --// mifare desfire
- CMD_MIFARE_DESFIRE_READBL = 0x0728,
- CMD_MIFARE_DESFIRE_WRITEBL = 0x0729,
- CMD_MIFARE_DESFIRE_AUTH1 = 0x072a,
- CMD_MIFARE_DESFIRE_AUTH2 = 0x072b,
- CMD_MIFARE_DES_READER = 0x072c,
- CMD_MIFARE_DESFIRE_INFO = 0x072d,
- CMD_MIFARE_DESFIRE = 0x072e,
-
- CMD_UNKNOWN = 0xFFFF,
-}
+local _commands = require('usb_cmd')
local _reverse_lookup,k,v = {}
for k, v in pairs(_commands) do