X-Git-Url: http://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/08ebca682cc85e938b3863d60e74ebf5b728a622..19a700a8b54f948623cb35f6f297dc03601f9950:/armsrc/lfops.c?ds=inline diff --git a/armsrc/lfops.c b/armsrc/lfops.c index b703c3cd..e34eab35 100644 --- a/armsrc/lfops.c +++ b/armsrc/lfops.c @@ -15,130 +15,44 @@ #include "crc16.h" #include "string.h" #include "lfdemod.h" +#include "lfsampling.h" /** -* Does the sample acquisition. If threshold is specified, the actual sampling -* is not commenced until the threshold has been reached. -* @param trigger_threshold - the threshold -* @param silent - is true, now outputs are made. If false, dbprints the status -*/ -void DoAcquisition125k_internal(int trigger_threshold,bool silent) -{ - uint8_t *dest = BigBuf_get_addr(); - int n = BigBuf_max_traceLen(); - int i; - - memset(dest, 0, n); - i = 0; - for(;;) { - if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) { - AT91C_BASE_SSC->SSC_THR = 0x43; - LED_D_ON(); - } - if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) { - dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR; - LED_D_OFF(); - if (trigger_threshold != -1 && dest[i] < trigger_threshold) - continue; - else - trigger_threshold = -1; - if (++i >= n) break; - } - } - if(!silent) - { - Dbprintf("buffer samples: %02x %02x %02x %02x %02x %02x %02x %02x ...", - dest[0], dest[1], dest[2], dest[3], dest[4], dest[5], dest[6], dest[7]); - - } -} -/** -* Perform sample aquisition. -*/ -void DoAcquisition125k(int trigger_threshold) -{ - DoAcquisition125k_internal(trigger_threshold, false); -} - -/** -* Setup the FPGA to listen for samples. This method downloads the FPGA bitstream -* if not already loaded, sets divisor and starts up the antenna. -* @param divisor : 1, 88> 255 or negative ==> 134.8 KHz -* 0 or 95 ==> 125 KHz -* -**/ -void LFSetupFPGAForADC(int divisor, bool lf_field) -{ - FpgaDownloadAndGo(FPGA_BITSTREAM_LF); - if ( (divisor == 1) || (divisor < 0) || (divisor > 255) ) - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz - else if (divisor == 0) - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz - else - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor); - - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | (lf_field ? FPGA_LF_ADC_READER_FIELD : 0)); - - // Connect the A/D to the peak-detected low-frequency path. - SetAdcMuxFor(GPIO_MUXSEL_LOPKD); - // Give it a bit of time for the resonant antenna to settle. - SpinDelay(50); - // Now set up the SSC to get the ADC samples that are now streaming at us. - FpgaSetupSsc(); -} -/** -* Initializes the FPGA, and acquires the samples. -**/ -void AcquireRawAdcSamples125k(int divisor) -{ - LFSetupFPGAForADC(divisor, true); - // Now call the acquisition routine - DoAcquisition125k_internal(-1,false); -} -/** -* Initializes the FPGA for snoop-mode, and acquires the samples. -**/ - -void SnoopLFRawAdcSamples(int divisor, int trigger_threshold) -{ - LFSetupFPGAForADC(divisor, false); - DoAcquisition125k(trigger_threshold); -} - + * Function to do a modulation and then get samples. + * @param delay_off + * @param period_0 + * @param period_1 + * @param command + */ void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1, uint8_t *command) { - /* Make sure the tag is reset */ - FpgaDownloadAndGo(FPGA_BITSTREAM_LF); - FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - SpinDelay(2500); - - int divisor_used = 95; // 125 KHz // see if 'h' was specified if (command[strlen((char *) command) - 1] == 'h') divisor_used = 88; // 134.8 KHz + sample_config sc = { 0,0,1, divisor_used, 0}; + setSamplingConfig(&sc); - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used); - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); - // Give it a bit of time for the resonant antenna to settle. - SpinDelay(50); + /* Make sure the tag is reset */ + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); + SpinDelay(2500); - // And a little more time for the tag to fully power up - SpinDelay(2000); + LFSetupFPGAForADC(sc.divisor, 1); - // Now set up the SSC to get the ADC samples that are now streaming at us. - FpgaSetupSsc(); + // And a little more time for the tag to fully power up + SpinDelay(2000); // now modulate the reader field while(*command != '\0' && *command != ' ') { FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); LED_D_OFF(); SpinDelayUs(delay_off); - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used); + FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor); FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); LED_D_ON(); @@ -150,14 +64,16 @@ void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1, FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); LED_D_OFF(); SpinDelayUs(delay_off); - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used); + FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor); FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); // now do the read - DoAcquisition125k(-1); + DoAcquisition_config(false); } + + /* blank r/w tag data stream ...0000000000000000 01111111 1010101010101010101010101010101010101010101010101010101010101010 @@ -645,8 +561,8 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol) WDT_HIT(); if (ledcontrol) LED_A_ON(); - DoAcquisition125k_internal(-1,true); - // FSK demodulator + DoAcquisition_default(-1,true); + // FSK demodulator size = sizeOfBigBuff; //variable size will change after demod so re initialize it before use idx = HIDdemodFSK(dest, &size, &hi2, &hi, &lo); @@ -706,6 +622,8 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol) } if (findone){ if (ledcontrol) LED_A_OFF(); + *high = hi; + *low = lo; return; } // reset @@ -722,7 +640,7 @@ void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol) uint8_t *dest = BigBuf_get_addr(); size_t size=0, idx=0; - int clk=0, invert=0, errCnt=0; + int clk=0, invert=0, errCnt=0, maxErr=20; uint64_t lo=0; // Configure to go in 125Khz listen mode LFSetupFPGAForADC(95, true); @@ -732,11 +650,11 @@ void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol) WDT_HIT(); if (ledcontrol) LED_A_ON(); - DoAcquisition125k_internal(-1,true); - size = BigBuf_max_traceLen(); + DoAcquisition_default(-1,true); + size = BigBuf_max_traceLen(); //Dbprintf("DEBUG: Buffer got"); //askdemod and manchester decode - errCnt = askmandemod(dest, &size, &clk, &invert); + errCnt = askmandemod(dest, &size, &clk, &invert, maxErr); //Dbprintf("DEBUG: ASK Got"); WDT_HIT(); @@ -753,6 +671,8 @@ void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol) } if (findone){ if (ledcontrol) LED_A_OFF(); + *high=lo>>32; + *low=lo & 0xFFFFFFFF; return; } } else{ @@ -783,8 +703,8 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) while(!BUTTON_PRESS()) { WDT_HIT(); if (ledcontrol) LED_A_ON(); - DoAcquisition125k_internal(-1,true); - //fskdemod and get start index + DoAcquisition_default(-1,true); + //fskdemod and get start index WDT_HIT(); idx = IOdemodFSK(dest, BigBuf_max_traceLen()); if (idx>0){ @@ -819,6 +739,8 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) if (findone){ if (ledcontrol) LED_A_OFF(); //LED_A_OFF(); + *high=code; + *low=code2; return; } code=code2=0; @@ -1388,7 +1310,9 @@ int DemodPCF7931(uint8_t **outBlocks) { int lmin=128, lmax=128; uint8_t dir; - AcquireRawAdcSamples125k(0); + LFSetupFPGAForADC(95, true); + DoAcquisition_default(0, 0); + lmin = 64; lmax = 192;