X-Git-Url: http://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/1523527f94c4c294d0c04d0fd3396ce7eda095e4..a66f26da182040ac798a7c629d255cb86803e9c2:/armsrc/iso15693.c diff --git a/armsrc/iso15693.c b/armsrc/iso15693.c index d988e2b9..4b4577e7 100644 --- a/armsrc/iso15693.c +++ b/armsrc/iso15693.c @@ -2,7 +2,7 @@ // Jonathan Westhues, split Nov 2006 // Modified by Greg Jones, Jan 2009 // Modified by Adrian Dabrowski "atrox", Mar-Sept 2010,Oct 2011 -// Modified by piwi, Oct 2018 +// Modified by piwi, Oct 2018 // // This code is licensed to you under the terms of the GNU GPL, version 2 or, // at your option, any later version. See the LICENSE.txt file for the text of @@ -16,26 +16,26 @@ // transmission modes from tag to reader. As of Oct 2018 this code supports // both reader modes and the high speed variant with one subcarrier from card to reader. // As long as the card fully support ISO 15693 this is no problem, since the -// reader chooses both data rates, but some non-standard tags do not. +// reader chooses both data rates, but some non-standard tags do not. // For card simulation, the code supports both high and low speed modes with one subcarrier. // // VCD (reader) -> VICC (tag) // 1 out of 256: -// data rate: 1,66 kbit/s (fc/8192) -// used for long range +// data rate: 1,66 kbit/s (fc/8192) +// used for long range // 1 out of 4: -// data rate: 26,48 kbit/s (fc/512) -// used for short range, high speed +// data rate: 26,48 kbit/s (fc/512) +// used for short range, high speed // // VICC (tag) -> VCD (reader) // Modulation: -// ASK / one subcarrier (423,75 khz) -// FSK / two subcarriers (423,75 khz && 484,28 khz) +// ASK / one subcarrier (423,75 khz) +// FSK / two subcarriers (423,75 khz && 484,28 khz) // Data Rates / Modes: -// low ASK: 6,62 kbit/s -// low FSK: 6.67 kbit/s -// high ASK: 26,48 kbit/s -// high FSK: 26,69 kbit/s +// low ASK: 6,62 kbit/s +// low FSK: 6.67 kbit/s +// high ASK: 26,48 kbit/s +// high FSK: 26,69 kbit/s //----------------------------------------------------------------------------- @@ -68,24 +68,14 @@ static int DEBUG = 0; /////////////////////////////////////////////////////////////////////// // ISO 15693 Part 2 - Air Interface -// This section basicly contains transmission and receiving of bits +// This section basically contains transmission and receiving of bits /////////////////////////////////////////////////////////////////////// -#define Crc(data,datalen) Iso15693Crc(data,datalen) -#define AddCrc(data,datalen) Iso15693AddCrc(data,datalen) -#define sprintUID(target,uid) Iso15693sprintUID(target,uid) - // buffers -#define ISO15693_DMA_BUFFER_SIZE 2048 // must be a power of 2 +#define ISO15693_DMA_BUFFER_SIZE 2048 // must be a power of 2 #define ISO15693_MAX_RESPONSE_LENGTH 36 // allows read single block with the maximum block size of 256bits. Read multiple blocks not supported yet #define ISO15693_MAX_COMMAND_LENGTH 45 // allows write single block with the maximum block size of 256bits. Write multiple blocks not supported yet -// timing. Delays in SSP_CLK ticks. -#define DELAY_READER_TO_ARM 8 -#define DELAY_ARM_TO_READER 1 -#define DELAY_ISO15693_VCD_TO_VICC 132 // 132/423.75kHz = 311.5us from end of EOF to start of tag response -#define DELAY_ISO15693_VICC_TO_VCD 1017 // 1017/3.39MHz = 300us between end of tag response and next reader command - // --------------------------- // Signal Processing // --------------------------- @@ -171,7 +161,7 @@ static void CodeIso15693AsReader(uint8_t *cmd, int n) for(i = 0; i < 4; i++) { ToSendStuffBit(1); } - + ToSendMax++; } @@ -225,22 +215,72 @@ static void CodeIso15693AsReader256(uint8_t *cmd, int n) } -static void CodeIso15693AsTag(uint8_t *cmd, int n) -{ +// static uint8_t encode4Bits(const uint8_t b) { + // uint8_t c = b & 0xF; + // // OTA, the least significant bits first + // // The columns are + // // 1 - Bit value to send + // // 2 - Reversed (big-endian) + // // 3 - Manchester Encoded + // // 4 - Hex values + + // switch(c){ + // // 1 2 3 4 + // case 15: return 0x55; // 1111 -> 1111 -> 01010101 -> 0x55 + // case 14: return 0x95; // 1110 -> 0111 -> 10010101 -> 0x95 + // case 13: return 0x65; // 1101 -> 1011 -> 01100101 -> 0x65 + // case 12: return 0xa5; // 1100 -> 0011 -> 10100101 -> 0xa5 + // case 11: return 0x59; // 1011 -> 1101 -> 01011001 -> 0x59 + // case 10: return 0x99; // 1010 -> 0101 -> 10011001 -> 0x99 + // case 9: return 0x69; // 1001 -> 1001 -> 01101001 -> 0x69 + // case 8: return 0xa9; // 1000 -> 0001 -> 10101001 -> 0xa9 + // case 7: return 0x56; // 0111 -> 1110 -> 01010110 -> 0x56 + // case 6: return 0x96; // 0110 -> 0110 -> 10010110 -> 0x96 + // case 5: return 0x66; // 0101 -> 1010 -> 01100110 -> 0x66 + // case 4: return 0xa6; // 0100 -> 0010 -> 10100110 -> 0xa6 + // case 3: return 0x5a; // 0011 -> 1100 -> 01011010 -> 0x5a + // case 2: return 0x9a; // 0010 -> 0100 -> 10011010 -> 0x9a + // case 1: return 0x6a; // 0001 -> 1000 -> 01101010 -> 0x6a + // default: return 0xaa; // 0000 -> 0000 -> 10101010 -> 0xaa + + // } +// } + +void CodeIso15693AsTag(uint8_t *cmd, size_t len) { + /* + * SOF comprises 3 parts; + * * An unmodulated time of 56.64 us + * * 24 pulses of 423.75 kHz (fc/32) + * * A logic 1, which starts with an unmodulated time of 18.88us + * followed by 8 pulses of 423.75kHz (fc/32) + * + * EOF comprises 3 parts: + * - A logic 0 (which starts with 8 pulses of fc/32 followed by an unmodulated + * time of 18.88us. + * - 24 pulses of fc/32 + * - An unmodulated time of 56.64 us + * + * A logic 0 starts with 8 pulses of fc/32 + * followed by an unmodulated time of 256/fc (~18,88us). + * + * A logic 0 starts with unmodulated time of 256/fc (~18,88us) followed by + * 8 pulses of fc/32 (also 18.88us) + * + * A bit here becomes 8 pulses of fc/32. Therefore: + * The SOF can be written as 00011101 = 0x1D + * The EOF can be written as 10111000 = 0xb8 + * A logic 1 is 01 + * A logic 0 is 10 + * + * */ + ToSendReset(); // SOF - ToSendStuffBit(0); - ToSendStuffBit(0); - ToSendStuffBit(0); - ToSendStuffBit(1); - ToSendStuffBit(1); - ToSendStuffBit(1); - ToSendStuffBit(0); - ToSendStuffBit(1); + ToSend[++ToSendMax] = 0x1D; // 00011101 // data - for(int i = 0; i < n; i++) { + for(int i = 0; i < len; i++) { for(int j = 0; j < 8; j++) { if ((cmd[i] >> j) & 0x01) { ToSendStuffBit(0); @@ -253,14 +293,7 @@ static void CodeIso15693AsTag(uint8_t *cmd, int n) } // EOF - ToSendStuffBit(1); - ToSendStuffBit(0); - ToSendStuffBit(1); - ToSendStuffBit(1); - ToSendStuffBit(1); - ToSendStuffBit(0); - ToSendStuffBit(0); - ToSendStuffBit(0); + ToSend[++ToSendMax] = 0xB8; // 10111000 ToSendMax++; } @@ -269,60 +302,66 @@ static void CodeIso15693AsTag(uint8_t *cmd, int n) // Transmit the command (to the tag) that was placed in cmd[]. static void TransmitTo15693Tag(const uint8_t *cmd, int len, uint32_t start_time) { - FpgaSetupSsc(FPGA_MAJOR_MODE_HF_READER_TX); - FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_TX); + FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER | FPGA_HF_READER_MODE_SEND_FULL_MOD); + FpgaSetupSsc(FPGA_MAJOR_MODE_HF_READER); - while (GetCountSspClk() < start_time); + while (GetCountSspClk() < start_time) ; LED_B_ON(); - for(int c = 0; c < len; ) { - if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { - AT91C_BASE_SSC->SSC_THR = ~cmd[c]; - c++; - } - WDT_HIT(); - } + for(int c = 0; c < len; c++) { + uint8_t data = cmd[c]; + for (int i = 0; i < 8; i++) { + uint16_t send_word = (data & 0x80) ? 0x0000 : 0xffff; + while (!(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY))) ; + AT91C_BASE_SSC->SSC_THR = send_word; + while (!(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY))) ; + AT91C_BASE_SSC->SSC_THR = send_word; + data <<= 1; + } + WDT_HIT(); + } LED_B_OFF(); } + //----------------------------------------------------------------------------- // Transmit the tag response (to the reader) that was placed in cmd[]. //----------------------------------------------------------------------------- -static void TransmitTo15693Reader(const uint8_t *cmd, size_t len, uint32_t start_time, bool slow) -{ +void TransmitTo15693Reader(const uint8_t *cmd, size_t len, uint32_t start_time, bool slow) { // don't use the FPGA_HF_SIMULATOR_MODULATE_424K_8BIT minor mode. It would spoil GetCountSspClk() FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_SIMULATOR | FPGA_HF_SIMULATOR_MODULATE_424K); uint8_t shift_delay = start_time & 0x00000007; - uint8_t bitmask = 0x00; - for (int i = 0; i < shift_delay; i++) { - bitmask |= (0x01 << i); - } while (GetCountSspClk() < (start_time & 0xfffffff8)) ; - AT91C_BASE_SSC->SSC_THR = 0x00; // clear TXRDY - LED_C_ON(); uint8_t bits_to_shift = 0x00; - for(size_t c = 0; c <= len; c++) { - uint8_t bits_to_send = bits_to_shift << (8 - shift_delay) | (c==len?0x00:cmd[c]) >> shift_delay; - bits_to_shift = cmd[c] & bitmask; + uint8_t bits_to_send = 0x00; + for(size_t c = 0; c < len; c++) { for (int i = 7; i >= 0; i--) { + uint8_t cmd_bits = ((cmd[c] >> i) & 0x01) ? 0xff : 0x00; for (int j = 0; j < (slow?4:1); ) { if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) { - if (bits_to_send >> i & 0x01) { - AT91C_BASE_SSC->SSC_THR = 0xff; - } else { - AT91C_BASE_SSC->SSC_THR = 0x00; - } + bits_to_send = bits_to_shift << (8 - shift_delay) | cmd_bits >> shift_delay; + AT91C_BASE_SSC->SSC_THR = bits_to_send; + bits_to_shift = cmd_bits; j++; } - WDT_HIT(); } - } - } + } + WDT_HIT(); + } + // send the remaining bits, padded with 0: + bits_to_send = bits_to_shift << (8 - shift_delay); + for ( ; ; ) { + if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) { + AT91C_BASE_SSC->SSC_THR = bits_to_send; + break; + } + } LED_C_OFF(); + } @@ -369,7 +408,7 @@ typedef struct DecodeTag { static int inline __attribute__((always_inline)) Handle15693SamplesFromTag(uint16_t amplitude, DecodeTag_t *DecodeTag) { switch(DecodeTag->state) { - case STATE_TAG_SOF_LOW: + case STATE_TAG_SOF_LOW: // waiting for 12 times low (11 times low is accepted as well) if (amplitude < NOISE_THRESHOLD) { DecodeTag->posCount++; @@ -383,7 +422,7 @@ static int inline __attribute__((always_inline)) Handle15693SamplesFromTag(uint1 } } break; - + case STATE_TAG_SOF_HIGH: // waiting for 10 times high. Take average over the last 8 if (amplitude > NOISE_THRESHOLD) { @@ -553,7 +592,7 @@ static int GetIso15693AnswerFromTag(uint8_t* response, uint16_t max_len, int tim bool gotFrame = false; uint16_t *dmaBuf = (uint16_t*)BigBuf_malloc(ISO15693_DMA_BUFFER_SIZE*sizeof(uint16_t)); - + // the Decoder data structure DecodeTag_t DecodeTag = { 0 }; DecodeTagInit(&DecodeTag, response, max_len); @@ -562,10 +601,10 @@ static int GetIso15693AnswerFromTag(uint8_t* response, uint16_t max_len, int tim while (!(AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXEMPTY)); // And put the FPGA in the appropriate mode - FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_AMPLITUDE); + FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER | FPGA_HF_READER_SUBCARRIER_424_KHZ | FPGA_HF_READER_MODE_RECEIVE_AMPLITUDE); // Setup and start DMA. - FpgaSetupSsc(FPGA_MAJOR_MODE_HF_READER_RX_XCORR); + FpgaSetupSsc(FPGA_MAJOR_MODE_HF_READER); FpgaSetupSscDma((uint8_t*) dmaBuf, ISO15693_DMA_BUFFER_SIZE); uint16_t *upTo = dmaBuf; @@ -604,9 +643,9 @@ static int GetIso15693AnswerFromTag(uint8_t* response, uint16_t max_len, int tim FpgaDisableSscDma(); BigBuf_free(); - + if (DEBUG) Dbprintf("samples = %d, gotFrame = %d, Decoder: state = %d, len = %d, bitCount = %d, posCount = %d", - samples, gotFrame, DecodeTag.state, DecodeTag.len, DecodeTag.bitCount, DecodeTag.posCount); + samples, gotFrame, DecodeTag.state, DecodeTag.len, DecodeTag.bitCount, DecodeTag.posCount); if (DecodeTag.len > 0) { LogTrace(DecodeTag.output, DecodeTag.len, 0, 0, NULL, false); @@ -648,7 +687,7 @@ typedef struct DecodeReader { int byteCount; int byteCountMax; int posCount; - int sum1, sum2; + int sum1, sum2; uint8_t *output; } DecodeReader_t; @@ -673,9 +712,9 @@ static void DecodeReaderReset(DecodeReader_t* DecodeReader) static int inline __attribute__((always_inline)) Handle15693SampleFromReader(uint8_t bit, DecodeReader_t *restrict DecodeReader) { - switch(DecodeReader->state) { + switch (DecodeReader->state) { case STATE_READER_UNSYNCD: - if(!bit) { + if (!bit) { // we went low, so this could be the beginning of a SOF DecodeReader->posCount = 1; DecodeReader->state = STATE_READER_AWAIT_1ST_RISING_EDGE_OF_SOF; @@ -684,14 +723,14 @@ static int inline __attribute__((always_inline)) Handle15693SampleFromReader(uin case STATE_READER_AWAIT_1ST_RISING_EDGE_OF_SOF: DecodeReader->posCount++; - if(bit) { // detected rising edge - if(DecodeReader->posCount < 4) { // rising edge too early (nominally expected at 5) + if (bit) { // detected rising edge + if (DecodeReader->posCount < 4) { // rising edge too early (nominally expected at 5) DecodeReaderReset(DecodeReader); } else { // SOF DecodeReader->state = STATE_READER_AWAIT_2ND_FALLING_EDGE_OF_SOF; } } else { - if(DecodeReader->posCount > 5) { // stayed low for too long + if (DecodeReader->posCount > 5) { // stayed low for too long DecodeReaderReset(DecodeReader); } else { // do nothing, keep waiting @@ -701,7 +740,7 @@ static int inline __attribute__((always_inline)) Handle15693SampleFromReader(uin case STATE_READER_AWAIT_2ND_FALLING_EDGE_OF_SOF: DecodeReader->posCount++; - if(!bit) { // detected a falling edge + if (!bit) { // detected a falling edge if (DecodeReader->posCount < 20) { // falling edge too early (nominally expected at 21 earliest) DecodeReaderReset(DecodeReader); } else if (DecodeReader->posCount < 23) { // SOF for 1 out of 4 coding @@ -714,7 +753,7 @@ static int inline __attribute__((always_inline)) Handle15693SampleFromReader(uin DecodeReader->state = STATE_READER_AWAIT_2ND_RISING_EDGE_OF_SOF; } } else { - if(DecodeReader->posCount > 29) { // stayed high for too long + if (DecodeReader->posCount > 29) { // stayed high for too long DecodeReaderReset(DecodeReader); } else { // do nothing, keep waiting @@ -872,19 +911,18 @@ static int inline __attribute__((always_inline)) Handle15693SampleFromReader(uin // Receive a command (from the reader to us, where we are the simulated tag), // and store it in the given buffer, up to the given maximum length. Keeps // spinning, waiting for a well-framed command, until either we get one -// (returns true) or someone presses the pushbutton on the board (false). +// (returns len) or someone presses the pushbutton on the board (returns -1). // // Assume that we're called with the SSC (to the FPGA) and ADC path set // correctly. //----------------------------------------------------------------------------- -static int GetIso15693CommandFromReader(uint8_t *received, size_t max_len, uint32_t *eof_time) -{ +int GetIso15693CommandFromReader(uint8_t *received, size_t max_len, uint32_t *eof_time) { int samples = 0; bool gotFrame = false; uint8_t b; - uint8_t *dmaBuf = BigBuf_malloc(ISO15693_DMA_BUFFER_SIZE); + uint8_t dmaBuf[ISO15693_DMA_BUFFER_SIZE]; // the decoder data structure DecodeReader_t DecodeReader = {0}; @@ -901,21 +939,21 @@ static int GetIso15693CommandFromReader(uint8_t *received, size_t max_len, uint3 (void) temp; while (!(AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY)) ; - uint32_t bit_time = GetCountSspClk() & 0xfffffff8; + uint32_t dma_start_time = GetCountSspClk() & 0xfffffff8; // Setup and start DMA. FpgaSetupSscDma(dmaBuf, ISO15693_DMA_BUFFER_SIZE); uint8_t *upTo = dmaBuf; - for(;;) { + for (;;) { uint16_t behindBy = ((uint8_t*)AT91C_BASE_PDC_SSC->PDC_RPR - upTo) & (ISO15693_DMA_BUFFER_SIZE-1); if (behindBy == 0) continue; b = *upTo++; - if(upTo >= dmaBuf + ISO15693_DMA_BUFFER_SIZE) { // we have read all of the DMA buffer content. + if (upTo >= dmaBuf + ISO15693_DMA_BUFFER_SIZE) { // we have read all of the DMA buffer content. upTo = dmaBuf; // start reading the circular buffer from the beginning - if(behindBy > (9*ISO15693_DMA_BUFFER_SIZE/10)) { + if (behindBy > (9*ISO15693_DMA_BUFFER_SIZE/10)) { Dbprintf("About to blow circular buffer - aborted! behindBy=%d", behindBy); break; } @@ -927,7 +965,7 @@ static int GetIso15693CommandFromReader(uint8_t *received, size_t max_len, uint3 for (int i = 7; i >= 0; i--) { if (Handle15693SampleFromReader((b >> i) & 0x01, &DecodeReader)) { - *eof_time = bit_time + samples - DELAY_READER_TO_ARM; // end of EOF + *eof_time = dma_start_time + samples - DELAY_READER_TO_ARM_SIM; // end of EOF gotFrame = true; break; } @@ -939,22 +977,24 @@ static int GetIso15693CommandFromReader(uint8_t *received, size_t max_len, uint3 } if (BUTTON_PRESS()) { - DecodeReader.byteCount = 0; + DecodeReader.byteCount = -1; break; } WDT_HIT(); } - FpgaDisableSscDma(); - BigBuf_free_keep_EM(); - + if (DEBUG) Dbprintf("samples = %d, gotFrame = %d, Decoder: state = %d, len = %d, bitCount = %d, posCount = %d", - samples, gotFrame, DecodeReader.state, DecodeReader.byteCount, DecodeReader.bitCount, DecodeReader.posCount); + samples, gotFrame, DecodeReader.state, DecodeReader.byteCount, DecodeReader.bitCount, DecodeReader.posCount); if (DecodeReader.byteCount > 0) { - LogTrace(DecodeReader.output, DecodeReader.byteCount, 0, 0, NULL, true); + uint32_t sof_time = *eof_time + - DecodeReader.byteCount * (DecodeReader.Coding==CODING_1_OUT_OF_4?128:2048) // time for byte transfers + - 32 // time for SOF transfer + - 16; // time for EOF transfer + LogTrace(DecodeReader.output, DecodeReader.byteCount, sof_time, *eof_time, NULL, true); } return DecodeReader.byteCount; @@ -976,7 +1016,7 @@ static void BuildIdentifyRequest(void) // no mask cmd[2] = 0x00; //Now the CRC - crc = Crc(cmd, 3); + crc = Iso15693Crc(cmd, 3); cmd[3] = crc & 0xff; cmd[4] = crc >> 8; @@ -997,34 +1037,23 @@ void AcquireRawAdcSamplesIso15693(void) uint8_t *dest = BigBuf_get_addr(); FpgaDownloadAndGo(FPGA_BITSTREAM_HF); - BuildIdentifyRequest(); - + FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER); + FpgaSetupSsc(FPGA_MAJOR_MODE_HF_READER); SetAdcMuxFor(GPIO_MUXSEL_HIPKD); + BuildIdentifyRequest(); + // Give the tags time to energize LED_D_ON(); - FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR); SpinDelay(100); // Now send the command - FpgaSetupSsc(FPGA_MAJOR_MODE_HF_READER_TX); - FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_TX); - - LED_B_ON(); - for(int c = 0; c < ToSendMax; ) { - if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { - AT91C_BASE_SSC->SSC_THR = ~ToSend[c]; - c++; - } - WDT_HIT(); - } - LED_B_OFF(); + TransmitTo15693Tag(ToSend, ToSendMax, 0); // wait for last transfer to complete - while (!(AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXEMPTY)); + while (!(AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXEMPTY)) ; - FpgaSetupSsc(FPGA_MAJOR_MODE_HF_READER_RX_XCORR); - FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_AMPLITUDE); + FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER | FPGA_HF_READER_SUBCARRIER_424_KHZ | FPGA_HF_READER_MODE_RECEIVE_AMPLITUDE); for(int c = 0; c < 4000; ) { if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) { @@ -1047,7 +1076,6 @@ void SnoopIso15693(void) clear_trace(); set_tracing(true); - // The DMA buffer, used to stream samples from the FPGA uint16_t* dmaBuf = (uint16_t*)BigBuf_malloc(ISO15693_DMA_BUFFER_SIZE*sizeof(uint16_t)); uint16_t *upTo; @@ -1072,13 +1100,13 @@ void SnoopIso15693(void) Dbprintf(" tag -> Reader: %i bytes", ISO15693_MAX_RESPONSE_LENGTH); Dbprintf(" DMA: %i bytes", ISO15693_DMA_BUFFER_SIZE * sizeof(uint16_t)); } - Dbprintf("Snoop started. Press button to stop."); - - FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_SNOOP | FPGA_HF_READER_RX_XCORR_AMPLITUDE); + Dbprintf("Snoop started. Press PM3 Button to stop."); + + FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER | FPGA_HF_READER_MODE_SNOOP_AMPLITUDE); SetAdcMuxFor(GPIO_MUXSEL_HIPKD); // Setup for the DMA. - FpgaSetupSsc(FPGA_MAJOR_MODE_HF_READER_RX_XCORR); + FpgaSetupSsc(FPGA_MAJOR_MODE_HF_READER); upTo = dmaBuf; FpgaSetupSscDma((uint8_t*) dmaBuf, ISO15693_DMA_BUFFER_SIZE); @@ -1111,7 +1139,7 @@ void SnoopIso15693(void) } } samples++; - + if (!TagIsActive) { // no need to try decoding reader data if the tag is sending if (Handle15693SampleFromReader(snoopdata & 0x02, &DecodeReader)) { FpgaDisableSscDma(); @@ -1140,7 +1168,7 @@ void SnoopIso15693(void) ReaderIsActive = (DecodeReader.state >= STATE_READER_AWAIT_2ND_RISING_EDGE_OF_SOF); } - if (!ReaderIsActive && ExpectTagAnswer) { // no need to try decoding tag data if the reader is currently sending or no answer expected yet + if (!ReaderIsActive && ExpectTagAnswer) { // no need to try decoding tag data if the reader is currently sending or no answer expected yet if (Handle15693SamplesFromTag(snoopdata >> 2, &DecodeTag)) { FpgaDisableSscDma(); //Use samples as a time measurement @@ -1159,7 +1187,7 @@ void SnoopIso15693(void) FpgaDisableSscDma(); BigBuf_free(); - + LEDsoff(); DbpString("Snoop statistics:"); @@ -1173,7 +1201,6 @@ void SnoopIso15693(void) // Initialize the proxmark as iso15k reader -// (this might produces glitches that confuse some tags static void Iso15693InitReader() { FpgaDownloadAndGo(FPGA_BITSTREAM_HF); // Setup SSC @@ -1185,11 +1212,11 @@ static void Iso15693InitReader() { SpinDelay(10); SetAdcMuxFor(GPIO_MUXSEL_HIPKD); - FpgaSetupSsc(FPGA_MAJOR_MODE_HF_READER_RX_XCORR); + FpgaSetupSsc(FPGA_MAJOR_MODE_HF_READER); // Give the tags time to energize LED_D_ON(); - FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR); + FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER); SpinDelay(250); } @@ -1207,7 +1234,7 @@ static void BuildReadBlockRequest(uint8_t *uid, uint8_t blockNumber ) uint16_t crc; // If we set the Option_Flag in this request, the VICC will respond with the security status of the block // followed by the block data - cmd[0] = ISO15693_REQ_OPTION | ISO15693_REQ_ADDRESS | ISO15693_REQ_DATARATE_HIGH; + cmd[0] = ISO15693_REQ_OPTION | ISO15693_REQ_ADDRESS | ISO15693_REQ_DATARATE_HIGH; // READ BLOCK command code cmd[1] = ISO15693_READBLOCK; // UID may be optionally specified here @@ -1223,7 +1250,7 @@ static void BuildReadBlockRequest(uint8_t *uid, uint8_t blockNumber ) // Block number to read cmd[10] = blockNumber; //Now the CRC - crc = Crc(cmd, 11); // the crc needs to be calculated over 11 bytes + crc = Iso15693Crc(cmd, 11); // the crc needs to be calculated over 11 bytes cmd[11] = crc & 0xff; cmd[12] = crc >> 8; @@ -1250,7 +1277,7 @@ static void BuildInventoryResponse(uint8_t *uid) cmd[8] = uid[1]; //0x05; cmd[9] = uid[0]; //0xe0; //Now the CRC - crc = Crc(cmd, 10); + crc = Iso15693Crc(cmd, 10); cmd[10] = crc & 0xff; cmd[11] = crc >> 8; @@ -1258,10 +1285,10 @@ static void BuildInventoryResponse(uint8_t *uid) } // Universal Method for sending to and recv bytes from a tag -// init ... should we initialize the reader? -// speed ... 0 low speed, 1 hi speed -// *recv will contain the tag's answer -// return: lenght of received data +// init ... should we initialize the reader? +// speed ... 0 low speed, 1 hi speed +// *recv will contain the tag's answer +// return: lenght of received data int SendDataTag(uint8_t *send, int sendlen, bool init, int speed, uint8_t *recv, uint16_t max_recv_len, uint32_t start_time) { LED_A_ON(); @@ -1284,7 +1311,7 @@ int SendDataTag(uint8_t *send, int sendlen, bool init, int speed, uint8_t *recv, // Now wait for a response if (recv != NULL) { - answerLen = GetIso15693AnswerFromTag(recv, max_recv_len, DELAY_ISO15693_VCD_TO_VICC * 2); + answerLen = GetIso15693AnswerFromTag(recv, max_recv_len, DELAY_ISO15693_VCD_TO_VICC_READER * 2); } LED_A_OFF(); @@ -1345,7 +1372,7 @@ void DbdecodeIso15693Answer(int len, uint8_t *d) { strncat(status,"NoErr ", DBD15STATLEN); } - crc=Crc(d,len-2); + crc=Iso15693Crc(d,len-2); if ( (( crc & 0xff ) == d[len-2]) && (( crc >> 8 ) == d[len-1]) ) strncat(status,"CrcOK",DBD15STATLEN); else @@ -1368,17 +1395,17 @@ void SetDebugIso15693(uint32_t debug) { } -//----------------------------------------------------------------------------- -// Simulate an ISO15693 reader, perform anti-collision and then attempt to read a sector +//--------------------------------------------------------------------------------------- +// Simulate an ISO15693 reader, perform anti-collision and then attempt to read a sector. // all demodulation performed in arm rather than host. - greg -//----------------------------------------------------------------------------- +//--------------------------------------------------------------------------------------- void ReaderIso15693(uint32_t parameter) { LEDsoff(); LED_A_ON(); set_tracing(true); - + int answerLen = 0; uint8_t TagUID[8] = {0x00}; @@ -1388,15 +1415,15 @@ void ReaderIso15693(uint32_t parameter) SetAdcMuxFor(GPIO_MUXSEL_HIPKD); // Setup SSC - FpgaSetupSsc(FPGA_MAJOR_MODE_HF_READER_RX_XCORR); + FpgaSetupSsc(FPGA_MAJOR_MODE_HF_READER); // Start from off (no field generated) - FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - SpinDelay(200); + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); + SpinDelay(200); // Give the tags time to energize LED_D_ON(); - FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR); + FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER); SpinDelay(200); StartCountSspClk(); @@ -1409,8 +1436,8 @@ void ReaderIso15693(uint32_t parameter) TransmitTo15693Tag(ToSend, ToSendMax, 0); // Now wait for a response - answerLen = GetIso15693AnswerFromTag(answer, sizeof(answer), DELAY_ISO15693_VCD_TO_VICC * 2) ; - uint32_t start_time = GetCountSspClk() + DELAY_ISO15693_VICC_TO_VCD; + answerLen = GetIso15693AnswerFromTag(answer, sizeof(answer), DELAY_ISO15693_VCD_TO_VICC_READER * 2) ; + uint32_t start_time = GetCountSspClk() + DELAY_ISO15693_VICC_TO_VCD_READER; if (answerLen >=12) // we should do a better check than this { @@ -1446,28 +1473,23 @@ void ReaderIso15693(uint32_t parameter) // read all pages if (answerLen >= 12 && DEBUG) { - - // debugptr = BigBuf_get_addr(); - - int i = 0; - while (i < 32) { // sanity check, assume max 32 pages + for (int i = 0; i < 32; i++) { // sanity check, assume max 32 pages BuildReadBlockRequest(TagUID, i); TransmitTo15693Tag(ToSend, ToSendMax, start_time); - int answerLen = GetIso15693AnswerFromTag(answer, sizeof(answer), DELAY_ISO15693_VCD_TO_VICC * 2); - start_time = GetCountSspClk() + DELAY_ISO15693_VICC_TO_VCD; + int answerLen = GetIso15693AnswerFromTag(answer, sizeof(answer), DELAY_ISO15693_VCD_TO_VICC_READER * 2); + start_time = GetCountSspClk() + DELAY_ISO15693_VICC_TO_VCD_READER; if (answerLen > 0) { Dbprintf("READ SINGLE BLOCK %d returned %d octets:", i, answerLen); DbdecodeIso15693Answer(answerLen, answer); Dbhexdump(answerLen, answer, false); if ( *((uint32_t*) answer) == 0x07160101 ) break; // exit on NoPageErr } - i++; } } // for the time being, switch field off to protect rdv4.0 // note: this prevents using hf 15 cmd with s option - which isn't implemented yet anyway - FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); LED_D_OFF(); LED_A_OFF(); @@ -1484,7 +1506,7 @@ void SimTagIso15693(uint32_t parameter, uint8_t *uid) FpgaDownloadAndGo(FPGA_BITSTREAM_HF); SetAdcMuxFor(GPIO_MUXSEL_HIPKD); - FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_SIMULATOR | FPGA_HF_SIMULATOR_NO_MODULATION); + FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_SIMULATOR | FPGA_HF_SIMULATOR_NO_MODULATION); FpgaSetupSsc(FPGA_MAJOR_MODE_HF_SIMULATOR); StartCountSspClk(); @@ -1501,7 +1523,7 @@ void SimTagIso15693(uint32_t parameter, uint8_t *uid) if ((cmd_len >= 5) && (cmd[0] & ISO15693_REQ_INVENTORY) && (cmd[1] == ISO15693_INVENTORY)) { // TODO: check more flags bool slow = !(cmd[0] & ISO15693_REQ_DATARATE_HIGH); - start_time = eof_time + DELAY_ISO15693_VCD_TO_VICC - DELAY_ARM_TO_READER; + start_time = eof_time + DELAY_ISO15693_VCD_TO_VICC_SIM - DELAY_ARM_TO_READER_SIM; TransmitTo15693Reader(ToSend, ToSendMax, start_time, slow); } @@ -1509,6 +1531,7 @@ void SimTagIso15693(uint32_t parameter, uint8_t *uid) Dbhexdump(cmd_len, cmd, false); } + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); LEDsoff(); } @@ -1522,24 +1545,24 @@ void BruteforceIso15693Afi(uint32_t speed) uint8_t data[6]; uint8_t recv[ISO15693_MAX_RESPONSE_LENGTH]; - + int datalen=0, recvlen=0; Iso15693InitReader(); StartCountSspClk(); - + // first without AFI // Tags should respond without AFI and with AFI=0 even when AFI is active data[0] = ISO15693_REQ_DATARATE_HIGH | ISO15693_REQ_INVENTORY | ISO15693_REQINV_SLOT1; data[1] = ISO15693_INVENTORY; data[2] = 0; // mask length - datalen = AddCrc(data,3); + datalen = Iso15693AddCrc(data,3); recvlen = SendDataTag(data, datalen, false, speed, recv, sizeof(recv), 0); - uint32_t start_time = GetCountSspClk() + DELAY_ISO15693_VCD_TO_VICC; + uint32_t start_time = GetCountSspClk() + DELAY_ISO15693_VICC_TO_VCD_READER; WDT_HIT(); if (recvlen>=12) { - Dbprintf("NoAFI UID=%s", sprintUID(NULL, &recv[2])); + Dbprintf("NoAFI UID=%s", Iso15693sprintUID(NULL, &recv[2])); } // now with AFI @@ -1551,17 +1574,17 @@ void BruteforceIso15693Afi(uint32_t speed) for (int i = 0; i < 256; i++) { data[2] = i & 0xFF; - datalen = AddCrc(data,4); + datalen = Iso15693AddCrc(data,4); recvlen = SendDataTag(data, datalen, false, speed, recv, sizeof(recv), start_time); - start_time = GetCountSspClk() + DELAY_ISO15693_VCD_TO_VICC; + start_time = GetCountSspClk() + DELAY_ISO15693_VICC_TO_VCD_READER; WDT_HIT(); if (recvlen >= 12) { - Dbprintf("AFI=%i UID=%s", i, sprintUID(NULL, &recv[2])); + Dbprintf("AFI=%i UID=%s", i, Iso15693sprintUID(NULL, &recv[2])); } } Dbprintf("AFI Bruteforcing done."); - FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); LEDsoff(); } @@ -1593,12 +1616,91 @@ void DirectTag15693Command(uint32_t datalen, uint32_t speed, uint32_t recv, uint // for the time being, switch field off to protect rdv4.0 // note: this prevents using hf 15 cmd with s option - which isn't implemented yet anyway - FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); LED_D_OFF(); LED_A_OFF(); } +//----------------------------------------------------------------------------- +// Work with "magic Chinese" card. +// +//----------------------------------------------------------------------------- + +// Set the UID to the tag (based on Iceman work). +void SetTag15693Uid(uint8_t *uid) +{ + uint8_t cmd[4][9] = {0x00}; + + uint16_t crc; + + int recvlen = 0; + uint8_t recvbuf[ISO15693_MAX_RESPONSE_LENGTH]; + + LED_A_ON(); + + // Command 1 : 02213E00000000 + cmd[0][0] = 0x02; + cmd[0][1] = 0x21; + cmd[0][2] = 0x3e; + cmd[0][3] = 0x00; + cmd[0][4] = 0x00; + cmd[0][5] = 0x00; + cmd[0][6] = 0x00; + + // Command 2 : 02213F69960000 + cmd[1][0] = 0x02; + cmd[1][1] = 0x21; + cmd[1][2] = 0x3f; + cmd[1][3] = 0x69; + cmd[1][4] = 0x96; + cmd[1][5] = 0x00; + cmd[1][6] = 0x00; + + // Command 3 : 022138u8u7u6u5 (where uX = uid byte X) + cmd[2][0] = 0x02; + cmd[2][1] = 0x21; + cmd[2][2] = 0x38; + cmd[2][3] = uid[7]; + cmd[2][4] = uid[6]; + cmd[2][5] = uid[5]; + cmd[2][6] = uid[4]; + + // Command 4 : 022139u4u3u2u1 (where uX = uid byte X) + cmd[3][0] = 0x02; + cmd[3][1] = 0x21; + cmd[3][2] = 0x39; + cmd[3][3] = uid[3]; + cmd[3][4] = uid[2]; + cmd[3][5] = uid[1]; + cmd[3][6] = uid[0]; + + for (int i=0; i<4; i++) { + // Add the CRC + crc = Iso15693Crc(cmd[i], 7); + cmd[i][7] = crc & 0xff; + cmd[i][8] = crc >> 8; + + if (DEBUG) { + Dbprintf("SEND:"); + Dbhexdump(sizeof(cmd[i]), cmd[i], false); + } + + recvlen = SendDataTag(cmd[i], sizeof(cmd[i]), true, 1, recvbuf, sizeof(recvbuf), 0); + + if (DEBUG) { + Dbprintf("RECV:"); + Dbhexdump(recvlen, recvbuf, false); + DbdecodeIso15693Answer(recvlen, recvbuf); + } + + cmd_send(CMD_ACK, recvlen>ISO15693_MAX_RESPONSE_LENGTH?ISO15693_MAX_RESPONSE_LENGTH:recvlen, 0, 0, recvbuf, ISO15693_MAX_RESPONSE_LENGTH); + } + + LED_D_OFF(); + + LED_A_OFF(); +} @@ -1614,8 +1716,8 @@ static void __attribute__((unused)) BuildSysInfoRequest(uint8_t *uid) uint8_t cmd[12]; uint16_t crc; - // If we set the Option_Flag in this request, the VICC will respond with the secuirty status of the block - // followed by teh block data + // If we set the Option_Flag in this request, the VICC will respond with the security status of the block + // followed by the block data // one sub-carrier, inventory, 1 slot, fast rate cmd[0] = (1 << 5) | (1 << 1); // no SELECT bit // System Information command code @@ -1631,7 +1733,7 @@ static void __attribute__((unused)) BuildSysInfoRequest(uint8_t *uid) cmd[8] = 0x05; cmd[9]= 0xe0; // always e0 (not exactly unique) //Now the CRC - crc = Crc(cmd, 10); // the crc needs to be calculated over 2 bytes + crc = Iso15693Crc(cmd, 10); // the crc needs to be calculated over 2 bytes cmd[10] = crc & 0xff; cmd[11] = crc >> 8; @@ -1645,8 +1747,8 @@ static void __attribute__((unused)) BuildReadMultiBlockRequest(uint8_t *uid) uint8_t cmd[14]; uint16_t crc; - // If we set the Option_Flag in this request, the VICC will respond with the secuirty status of the block - // followed by teh block data + // If we set the Option_Flag in this request, the VICC will respond with the security status of the block + // followed by the block data // one sub-carrier, inventory, 1 slot, fast rate cmd[0] = (1 << 5) | (1 << 1); // no SELECT bit // READ Multi BLOCK command code @@ -1666,7 +1768,7 @@ static void __attribute__((unused)) BuildReadMultiBlockRequest(uint8_t *uid) // Number of Blocks to read cmd[11] = 0x2f; // read quite a few //Now the CRC - crc = Crc(cmd, 12); // the crc needs to be calculated over 2 bytes + crc = Iso15693Crc(cmd, 12); // the crc needs to be calculated over 2 bytes cmd[12] = crc & 0xff; cmd[13] = crc >> 8; @@ -1679,8 +1781,8 @@ static void __attribute__((unused)) BuildArbitraryRequest(uint8_t *uid,uint8_t C uint8_t cmd[14]; uint16_t crc; - // If we set the Option_Flag in this request, the VICC will respond with the secuirty status of the block - // followed by teh block data + // If we set the Option_Flag in this request, the VICC will respond with the security status of the block + // followed by the block data // one sub-carrier, inventory, 1 slot, fast rate cmd[0] = (1 << 5) | (1 << 1); // no SELECT bit // READ BLOCK command code @@ -1699,9 +1801,9 @@ static void __attribute__((unused)) BuildArbitraryRequest(uint8_t *uid,uint8_t C cmd[10] = 0x00; cmd[11] = 0x0a; -// cmd[12] = 0x00; -// cmd[13] = 0x00; //Now the CRC - crc = Crc(cmd, 12); // the crc needs to be calculated over 2 bytes +// cmd[12] = 0x00; +// cmd[13] = 0x00; //Now the CRC + crc = Iso15693Crc(cmd, 12); // the crc needs to be calculated over 2 bytes cmd[12] = crc & 0xff; cmd[13] = crc >> 8; @@ -1714,8 +1816,8 @@ static void __attribute__((unused)) BuildArbitraryCustomRequest(uint8_t uid[], u uint8_t cmd[14]; uint16_t crc; - // If we set the Option_Flag in this request, the VICC will respond with the secuirty status of the block - // followed by teh block data + // If we set the Option_Flag in this request, the VICC will respond with the security status of the block + // followed by the block data // one sub-carrier, inventory, 1 slot, fast rate cmd[0] = (1 << 5) | (1 << 1); // no SELECT bit // READ BLOCK command code @@ -1731,12 +1833,12 @@ static void __attribute__((unused)) BuildArbitraryCustomRequest(uint8_t uid[], u cmd[8] = 0x05; cmd[9]= 0xe0; // always e0 (not exactly unique) // Parameter - cmd[10] = 0x05; // for custom codes this must be manufcturer code + cmd[10] = 0x05; // for custom codes this must be manufacturer code cmd[11] = 0x00; -// cmd[12] = 0x00; -// cmd[13] = 0x00; //Now the CRC - crc = Crc(cmd, 12); // the crc needs to be calculated over 2 bytes +// cmd[12] = 0x00; +// cmd[13] = 0x00; //Now the CRC + crc = Iso15693Crc(cmd, 12); // the crc needs to be calculated over 2 bytes cmd[12] = crc & 0xff; cmd[13] = crc >> 8;