X-Git-Url: http://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/173ba1e1a268c1a04dd438c4e0cbe06088187703..refs/pull/938/head:/armsrc/legicrf.c?ds=inline

diff --git a/armsrc/legicrf.c b/armsrc/legicrf.c
index c8a4829f..71ff0321 100644
--- a/armsrc/legicrf.c
+++ b/armsrc/legicrf.c
@@ -10,15 +10,17 @@
 // LEGIC RF simulation code
 //-----------------------------------------------------------------------------
 
+#include "legicrf.h"
+
 #include "proxmark3.h"
 #include "apps.h"
+#include "usb_cdc.h"
 #include "util.h"
 #include "string.h"
-
-#include "legicrf.h"
 #include "legic_prng.h"
 #include "legic.h"
 #include "crc.h"
+#include "fpgaloader.h"
 
 static legic_card_select_t card;/* metadata of currently selected card */
 static crc_t legic_crc;
@@ -63,11 +65,11 @@ static uint32_t last_frame_end; /* ts of last bit of previews rx or tx frame */
 // I/O interface abstraction (FPGA -> ARM)
 //-----------------------------------------------------------------------------
 
-static inline uint8_t rx_byte_from_fpga() {
+static inline uint16_t rx_frame_from_fpga() {
   for(;;) {
     WDT_HIT();
 
-    // wait for byte be become available in rx holding register
+    // wait for frame be become available in rx holding register
     if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
       return AT91C_BASE_SSC->SSC_RHR;
     }
@@ -88,33 +90,32 @@ static inline uint8_t rx_byte_from_fpga() {
 // To reduce CPU time the amplitude is approximated by using linear functions:
 //   am = MAX(ABS(i),ABS(q)) + 1/2*MIN(ABS(i),ABSq))
 //
-// Note: The SSC receiver is never synchronized the calculation my be performed
-// on a I/Q pair from two subsequent correlations, but does not matter.
-//
 // The bit time is 99.1us (21 I/Q pairs). The receiver skips the first 5 samples
 // and averages the next (most stable) 8 samples. The final 8 samples are dropped
 // also.
 //
-// The demedulated should be alligned to the bit periode by the caller. This is
+// The demodulated should be alligned to the bit period by the caller. This is
 // done in rx_bit and rx_ack.
 static inline bool rx_bit() {
-  int32_t cq = 0;
-  int32_t ci = 0;
+  int32_t sum_cq = 0;
+  int32_t sum_ci = 0;
 
   // skip first 5 I/Q pairs
   for(size_t i = 0; i<5; ++i) {
-    (int8_t)rx_byte_from_fpga();
-    (int8_t)rx_byte_from_fpga();
+    (void)rx_frame_from_fpga();
   }
 
   // sample next 8 I/Q pairs
   for(size_t i = 0; i<8; ++i) {
-    cq += (int8_t)rx_byte_from_fpga();
-    ci += (int8_t)rx_byte_from_fpga();
+    uint16_t iq = rx_frame_from_fpga();
+    int8_t ci = (int8_t)(iq >> 8);
+    int8_t cq = (int8_t)(iq & 0xff);
+    sum_ci += ci;
+    sum_cq += cq;
   }
 
   // calculate power
-  int32_t power = (MAX(ABS(ci), ABS(cq)) + (MIN(ABS(ci), ABS(cq)) >> 1));
+  int32_t power = (MAX(ABS(sum_ci), ABS(sum_cq)) + MIN(ABS(sum_ci), ABS(sum_cq))/2);
 
   // compare average (power / 8) to threshold
   return ((power >> 3) > INPUT_THRESHOLD);
@@ -131,12 +132,12 @@ static inline bool rx_bit() {
 
 static inline void tx_bit(bool bit) {
   // insert pause
-  LOW(GPIO_SSC_DOUT);
+  HIGH(GPIO_SSC_DOUT);
   last_frame_end += RWD_TIME_PAUSE;
   while(GET_TICKS < last_frame_end) { };
-  HIGH(GPIO_SSC_DOUT);
 
-  // return to high, wait for bit periode to end
+  // return to carrier on, wait for bit periode to end
+  LOW(GPIO_SSC_DOUT);
   last_frame_end += (bit ? RWD_TIME_1 : RWD_TIME_0) - RWD_TIME_PAUSE;
   while(GET_TICKS < last_frame_end) { };
 }
@@ -152,7 +153,7 @@ static inline void tx_bit(bool bit) {
 //-----------------------------------------------------------------------------
 
 static void tx_frame(uint32_t frame, uint8_t len) {
-  FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_TX);
+  FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER | FPGA_HF_READER_MODE_SEND_FULL_MOD);
 
   // wait for next tx timeslot
   last_frame_end += RWD_FRAME_WAIT;
@@ -166,16 +167,14 @@ static void tx_frame(uint32_t frame, uint8_t len) {
   };
 
   // add pause to mark end of the frame
-  LOW(GPIO_SSC_DOUT);
+  HIGH(GPIO_SSC_DOUT);
   last_frame_end += RWD_TIME_PAUSE;
   while(GET_TICKS < last_frame_end) { };
-  HIGH(GPIO_SSC_DOUT);
+  LOW(GPIO_SSC_DOUT);
 }
 
 static uint32_t rx_frame(uint8_t len) {
-  FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR
-                  | FPGA_HF_READER_RX_XCORR_848_KHZ
-                  | FPGA_HF_READER_RX_XCORR_QUARTER_FREQ);
+  FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER | FPGA_HF_READER_SUBCARRIER_212_KHZ | FPGA_HF_READER_MODE_RECEIVE_IQ);
 
   // hold sampling until card is expected to respond
   last_frame_end += TAG_FRAME_WAIT;
@@ -196,9 +195,7 @@ static uint32_t rx_frame(uint8_t len) {
 
 static bool rx_ack() {
   // change fpga into rx mode
-  FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR
-                  | FPGA_HF_READER_RX_XCORR_848_KHZ
-                  | FPGA_HF_READER_RX_XCORR_QUARTER_FREQ);
+  FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER | FPGA_HF_READER_SUBCARRIER_212_KHZ | FPGA_HF_READER_MODE_RECEIVE_IQ);
 
   // hold sampling until card is expected to respond
   last_frame_end += TAG_FRAME_WAIT;
@@ -258,19 +255,17 @@ static int init_card(uint8_t cardtype, legic_card_select_t *p_card) {
 static void init_reader(bool clear_mem) {
   // configure FPGA
   FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
-  FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR
-                  | FPGA_HF_READER_RX_XCORR_848_KHZ
-                  | FPGA_HF_READER_RX_XCORR_QUARTER_FREQ);
+  FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER | FPGA_HF_READER_SUBCARRIER_212_KHZ | FPGA_HF_READER_MODE_RECEIVE_IQ);
   SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
   LED_D_ON();
 
   // configure SSC with defaults
-  FpgaSetupSsc();
+  FpgaSetupSsc(FPGA_MAJOR_MODE_HF_READER);
 
   // re-claim GPIO_SSC_DOUT as GPIO and enable output
   AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
   AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
-  HIGH(GPIO_SSC_DOUT);
+  LOW(GPIO_SSC_DOUT);
 
   // init crc calculator
   crc_init(&legic_crc, 4, 0x19 >> 1, 0x05, 0);
@@ -385,8 +380,9 @@ void LegicRfReader(int offset, int bytes) {
   // establish shared secret and detect card type
   DbpString("Reading card ...");
   uint8_t card_type = setup_phase(SESSION_IV);
+  uint8_t result = 0;
   if(init_card(card_type, &card) != 0) {
-    Dbprintf("No or unknown card found, aborting");
+    result = 1;
     goto OUT;
   }
 
@@ -403,17 +399,14 @@ void LegicRfReader(int offset, int bytes) {
   for(uint16_t i = 0; i < bytes; ++i) {
     int16_t byte = read_byte(offset + i, card.cmdsize);
     if(byte == -1) {
-      Dbprintf("operation failed @ 0x%03.3x", bytes);
+      result = 2;
       goto OUT;
     }
     BigBuf[i] = byte;
   }
 
-  // OK
-  Dbprintf("Card (MIM %i) read, use 'hf legic decode' or", card.cardsize);
-  Dbprintf("'data hexsamples %d' to view results", (bytes+7) & ~7);
-
 OUT:
+  cmd_send(CMD_ACK, result, bytes, 0, &card, sizeof(card));
   FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
   LED_B_OFF();
   LED_C_OFF();