X-Git-Url: http://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/42f57e0294c13f14f8ebcdcc529b5872c2884786..27d06e044795c0b0ea4d34b10bccfa41d57f77fc:/armsrc/fpgaloader.c diff --git a/armsrc/fpgaloader.c b/armsrc/fpgaloader.c index 077b378a..45294d60 100644 --- a/armsrc/fpgaloader.c +++ b/armsrc/fpgaloader.c @@ -9,10 +9,30 @@ // Routines to load the FPGA image, and then to configure the FPGA's major // mode once it is configured. //----------------------------------------------------------------------------- -#include "proxmark3.h" + +#include "fpgaloader.h" + +#include +#include +#include #include "apps.h" +#include "fpga.h" +#include "proxmark3.h" #include "util.h" #include "string.h" +#include "BigBuf.h" +#include "zlib.h" + +// remember which version of the bitstream we have already downloaded to the FPGA +static int downloaded_bitstream = 0; + +// this is where the bitstreams are located in memory: +extern uint8_t _binary_obj_fpga_all_bit_z_start, _binary_obj_fpga_all_bit_z_end; + +static uint8_t *fpga_image_ptr = NULL; +static uint32_t uncompressed_bytes_cnt; + +#define OUTPUT_BUFFER_LEN 80 //----------------------------------------------------------------------------- // Set up the Serial Peripheral Interface as master @@ -92,10 +112,10 @@ void SetupSpi(int mode) } //----------------------------------------------------------------------------- -// Set up the synchronous serial port, with the one set of options that we -// always use when we are talking to the FPGA. Both RX and TX are enabled. +// Set up the synchronous serial port with the set of options that fits +// the FPGA mode. Both RX and TX are always enabled. //----------------------------------------------------------------------------- -void FpgaSetupSsc(void) +void FpgaSetupSsc(uint8_t FPGA_mode) { // First configure the GPIOs, and get ourselves a clock. AT91C_BASE_PIOA->PIO_ASR = @@ -114,11 +134,15 @@ void FpgaSetupSsc(void) // on RX clock rising edge, sampled on falling edge AT91C_BASE_SSC->SSC_RCMR = SSC_CLOCK_MODE_SELECT(1) | SSC_CLOCK_MODE_START(1); - // 8 bits per transfer, no loopback, MSB first, 1 transfer per sync + // 8, 16 or 32 bits per transfer, no loopback, MSB first, 1 transfer per sync // pulse, no output sync - AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(8) | AT91C_SSC_MSBF | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0); + if ((FPGA_mode & 0xe0) == FPGA_MAJOR_MODE_HF_READER_RX_XCORR) { + AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(16) | AT91C_SSC_MSBF | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0); + } else { + AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(8) | AT91C_SSC_MSBF | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0); + } - // clock comes from TK pin, no clock output, outputs change on falling + // TX clock comes from TK pin, no clock output, outputs change on falling // edge of TK, sample on rising edge of TK, start on positive-going edge of sync AT91C_BASE_SSC->SSC_TCMR = SSC_CLOCK_MODE_SELECT(2) | SSC_CLOCK_MODE_START(5); @@ -134,22 +158,106 @@ void FpgaSetupSsc(void) // ourselves, not to another buffer). The stuff to manipulate those buffers // is in apps.h, because it should be inlined, for speed. //----------------------------------------------------------------------------- -bool FpgaSetupSscDma(uint8_t *buf, int len) +bool FpgaSetupSscDma(uint8_t *buf, uint16_t sample_count) +{ + if (buf == NULL) return false; + + AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS; // Disable DMA Transfer + AT91C_BASE_PDC_SSC->PDC_RPR = (uint32_t) buf; // transfer to this memory address + AT91C_BASE_PDC_SSC->PDC_RCR = sample_count; // transfer this many samples + AT91C_BASE_PDC_SSC->PDC_RNPR = (uint32_t) buf; // next transfer to same memory address + AT91C_BASE_PDC_SSC->PDC_RNCR = sample_count; // ... with same number of samples AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTEN; // go! + AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTEN; // go! + return true; +} + + +//---------------------------------------------------------------------------- +// Uncompress (inflate) the FPGA data. Returns one decompressed byte with +// each call. +//---------------------------------------------------------------------------- +static int get_from_fpga_combined_stream(z_streamp compressed_fpga_stream, uint8_t *output_buffer) +{ + if (fpga_image_ptr == compressed_fpga_stream->next_out) { // need more data + compressed_fpga_stream->next_out = output_buffer; + compressed_fpga_stream->avail_out = OUTPUT_BUFFER_LEN; + fpga_image_ptr = output_buffer; + int res = inflate(compressed_fpga_stream, Z_SYNC_FLUSH); + if (res != Z_OK) + Dbprintf("inflate returned: %d, %s", res, compressed_fpga_stream->msg); + + if (res < 0) + return res; + } + + uncompressed_bytes_cnt++; + + return *fpga_image_ptr++; +} + +//---------------------------------------------------------------------------- +// Undo the interleaving of several FPGA config files. FPGA config files +// are combined into one big file: +// 288 bytes from FPGA file 1, followed by 288 bytes from FGPA file 2, etc. +//---------------------------------------------------------------------------- +static int get_from_fpga_stream(int bitstream_version, z_streamp compressed_fpga_stream, uint8_t *output_buffer) { - if (buf == NULL) { - return false; - } - - AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS; // Disable DMA Transfer - AT91C_BASE_PDC_SSC->PDC_RPR = (uint32_t) buf; // transfer to this memory address - AT91C_BASE_PDC_SSC->PDC_RCR = len; // transfer this many bytes - AT91C_BASE_PDC_SSC->PDC_RNPR = (uint32_t) buf; // next transfer to same memory address - AT91C_BASE_PDC_SSC->PDC_RNCR = len; // ... with same number of bytes - AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTEN; // go! - - return true; + while((uncompressed_bytes_cnt / FPGA_INTERLEAVE_SIZE) % fpga_bitstream_num != (bitstream_version - 1)) { + // skip undesired data belonging to other bitstream_versions + get_from_fpga_combined_stream(compressed_fpga_stream, output_buffer); + } + + return get_from_fpga_combined_stream(compressed_fpga_stream, output_buffer); + +} + + +static voidpf fpga_inflate_malloc(voidpf opaque, uInt items, uInt size) +{ + return BigBuf_malloc(items*size); +} + + +static void fpga_inflate_free(voidpf opaque, voidpf address) +{ + BigBuf_free(); BigBuf_Clear_ext(false); } + +//---------------------------------------------------------------------------- +// Initialize decompression of the respective (HF or LF) FPGA stream +//---------------------------------------------------------------------------- +static bool reset_fpga_stream(int bitstream_version, z_streamp compressed_fpga_stream, uint8_t *output_buffer) +{ + uint8_t header[FPGA_BITSTREAM_FIXED_HEADER_SIZE]; + + uncompressed_bytes_cnt = 0; + + // initialize z_stream structure for inflate: + compressed_fpga_stream->next_in = &_binary_obj_fpga_all_bit_z_start; + compressed_fpga_stream->avail_in = &_binary_obj_fpga_all_bit_z_end - &_binary_obj_fpga_all_bit_z_start; + compressed_fpga_stream->next_out = output_buffer; + compressed_fpga_stream->avail_out = OUTPUT_BUFFER_LEN; + compressed_fpga_stream->zalloc = &fpga_inflate_malloc; + compressed_fpga_stream->zfree = &fpga_inflate_free; + + inflateInit2(compressed_fpga_stream, 0); + + fpga_image_ptr = output_buffer; + + for (uint16_t i = 0; i < FPGA_BITSTREAM_FIXED_HEADER_SIZE; i++) { + header[i] = get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer); + } + + // Check for a valid .bit file (starts with bitparse_fixed_header) + if(memcmp(bitparse_fixed_header, header, FPGA_BITSTREAM_FIXED_HEADER_SIZE) == 0) { + return true; + } else { + return false; + } +} + + static void DownloadFPGA_byte(unsigned char w) { #define SEND_BIT(x) { if(w & (1<PIO_OER = GPIO_FPGA_ON; @@ -218,23 +328,15 @@ static void DownloadFPGA(const char *FpgaImage, int FpgaImageLen, int byterevers return; } - if(bytereversal) { - /* This is only supported for uint32_t aligned images */ - if( ((int)FpgaImage % sizeof(uint32_t)) == 0 ) { - i=0; - while(FpgaImageLen-->0) - DownloadFPGA_byte(FpgaImage[(i++)^0x3]); - /* Explanation of the magic in the above line: - * i^0x3 inverts the lower two bits of the integer i, counting backwards - * for each 4 byte increment. The generated sequence of (i++)^3 is - * 3 2 1 0 7 6 5 4 11 10 9 8 15 14 13 12 etc. pp. - */ + for(i = 0; i < FpgaImageLen; i++) { + int b = get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer); + if (b < 0) { + Dbprintf("Error %d during FpgaDownload", b); + break; } - } else { - while(FpgaImageLen-->0) - DownloadFPGA_byte(*FpgaImage++); + DownloadFPGA_byte(b); } - + // continue to clock FPGA until ready signal goes high i=100000; while ( (i--) && ( !(AT91C_BASE_PIOA->PIO_PDSR & GPIO_FPGA_DONE ) ) ) { @@ -250,39 +352,21 @@ static void DownloadFPGA(const char *FpgaImage, int FpgaImageLen, int byterevers LED_D_OFF(); } -static char *bitparse_headers_start; -static char *bitparse_bitstream_end; -static int bitparse_initialized = 0; + /* Simple Xilinx .bit parser. The file starts with the fixed opaque byte sequence * 00 09 0f f0 0f f0 0f f0 0f f0 00 00 01 * After that the format is 1 byte section type (ASCII character), 2 byte length * (big endian), bytes content. Except for section 'e' which has 4 bytes * length. */ -static const char _bitparse_fixed_header[] = {0x00, 0x09, 0x0f, 0xf0, 0x0f, 0xf0, 0x0f, 0xf0, 0x0f, 0xf0, 0x00, 0x00, 0x01}; -static int bitparse_init(void * start_address, void *end_address) -{ - bitparse_initialized = 0; - - if(memcmp(_bitparse_fixed_header, start_address, sizeof(_bitparse_fixed_header)) != 0) { - return 0; /* Not matched */ - } else { - bitparse_headers_start= ((char*)start_address) + sizeof(_bitparse_fixed_header); - bitparse_bitstream_end= (char*)end_address; - bitparse_initialized = 1; - return 1; - } -} - -int bitparse_find_section(char section_name, char **section_start, unsigned int *section_length) +static int bitparse_find_section(int bitstream_version, char section_name, unsigned int *section_length, z_streamp compressed_fpga_stream, uint8_t *output_buffer) { - char *pos = bitparse_headers_start; int result = 0; - - if(!bitparse_initialized) return 0; - - while(pos < bitparse_bitstream_end) { - char current_name = *pos++; + #define MAX_FPGA_BIT_STREAM_HEADER_SEARCH 100 // maximum number of bytes to search for the requested section + uint16_t numbytes = 0; + while(numbytes < MAX_FPGA_BIT_STREAM_HEADER_SEARCH) { + char current_name = get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer); + numbytes++; unsigned int current_length = 0; if(current_name < 'a' || current_name > 'e') { /* Strange section name, abort */ @@ -292,11 +376,13 @@ int bitparse_find_section(char section_name, char **section_start, unsigned int switch(current_name) { case 'e': /* Four byte length field */ - current_length += (*pos++) << 24; - current_length += (*pos++) << 16; + current_length += get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer) << 24; + current_length += get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer) << 16; + numbytes += 2; default: /* Fall through, two byte length field */ - current_length += (*pos++) << 8; - current_length += (*pos++) << 0; + current_length += get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer) << 8; + current_length += get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer) << 0; + numbytes += 2; } if(current_name != 'e' && current_length > 255) { @@ -306,110 +392,56 @@ int bitparse_find_section(char section_name, char **section_start, unsigned int if(current_name == section_name) { /* Found it */ - *section_start = pos; *section_length = current_length; result = 1; break; } - pos += current_length; /* Skip section */ + for (uint16_t i = 0; i < current_length && numbytes < MAX_FPGA_BIT_STREAM_HEADER_SEARCH; i++) { + get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer); + numbytes++; + } } return result; } -//----------------------------------------------------------------------------- -// Find out which FPGA image format is stored in flash, then call DownloadFPGA -// with the right parameters to download the image -//----------------------------------------------------------------------------- -extern char _binary_fpga_lf_bit_start, _binary_fpga_lf_bit_end; -extern char _binary_fpga_hf_bit_start, _binary_fpga_hf_bit_end; + +//---------------------------------------------------------------------------- +// Check which FPGA image is currently loaded (if any). If necessary +// decompress and load the correct (HF or LF) image to the FPGA +//---------------------------------------------------------------------------- void FpgaDownloadAndGo(int bitstream_version) { - void *bit_start; - void *bit_end; - + z_stream compressed_fpga_stream; + uint8_t output_buffer[OUTPUT_BUFFER_LEN] = {0x00}; + // check whether or not the bitstream is already loaded - if (FpgaGatherBitstreamVersion() == bitstream_version) + if (downloaded_bitstream == bitstream_version) return; - if (bitstream_version == FPGA_BITSTREAM_LF) { - bit_start = &_binary_fpga_lf_bit_start; - bit_end = &_binary_fpga_lf_bit_end; - } else if (bitstream_version == FPGA_BITSTREAM_HF) { - bit_start = &_binary_fpga_hf_bit_start; - bit_end = &_binary_fpga_hf_bit_end; - } else + // make sure that we have enough memory to decompress + BigBuf_free(); BigBuf_Clear_ext(false); + + if (!reset_fpga_stream(bitstream_version, &compressed_fpga_stream, output_buffer)) { return; - /* Check for the new flash image format: Should have the .bit file at &_binary_fpga_bit_start - */ - if(bitparse_init(bit_start, bit_end)) { - /* Successfully initialized the .bit parser. Find the 'e' section and - * send its contents to the FPGA. - */ - char *bitstream_start; - unsigned int bitstream_length; - if(bitparse_find_section('e', &bitstream_start, &bitstream_length)) { - DownloadFPGA(bitstream_start, bitstream_length, 0); - - return; /* All done */ - } } - /* Fallback for the old flash image format: Check for the magic marker 0xFFFFFFFF - * 0xAA995566 at address 0x102000. This is raw bitstream with a size of 336,768 bits - * = 10,524 uint32_t, stored as uint32_t e.g. little-endian in memory, but each DWORD - * is still to be transmitted in MSBit first order. Set the invert flag to indicate - * that the DownloadFPGA function should invert every 4 byte sequence when doing - * the bytewise download. - */ - if( *(uint32_t*)0x102000 == 0xFFFFFFFF && *(uint32_t*)0x102004 == 0xAA995566 ) - DownloadFPGA((char*)0x102000, 10524*4, 1); -} + unsigned int bitstream_length; + if (bitparse_find_section(bitstream_version, 'e', &bitstream_length, &compressed_fpga_stream, output_buffer)) { + DownloadFPGA(bitstream_version, bitstream_length, &compressed_fpga_stream, output_buffer); + downloaded_bitstream = bitstream_version; + } -int FpgaGatherBitstreamVersion() -{ - char temp[256]; - FpgaGatherVersion(temp, sizeof (temp)); - if (!memcmp("LF", temp, 2)) - return FPGA_BITSTREAM_LF; - else if (!memcmp("HF", temp, 2)) - return FPGA_BITSTREAM_HF; - return FPGA_BITSTREAM_ERR; -} + inflateEnd(&compressed_fpga_stream); + + // turn off antenna + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); + + // free eventually allocated BigBuf memory + BigBuf_free(); BigBuf_Clear_ext(false); +} -void FpgaGatherVersion(char *dst, int len) -{ - char *fpga_info; - unsigned int fpga_info_len; - dst[0] = 0; - if(!bitparse_find_section('e', &fpga_info, &fpga_info_len)) { - strncat(dst, "FPGA image: legacy image without version information", len-1); - } else { - /* USB packets only have 48 bytes data payload, so be terse */ - if(bitparse_find_section('a', &fpga_info, &fpga_info_len) && fpga_info[fpga_info_len-1] == 0 ) { - if (!memcmp("fpga_lf", fpga_info, 7)) - strncat(dst, "LF ", len-1); - else if (!memcmp("fpga_hf", fpga_info, 7)) - strncat(dst, "HF ", len-1); - } - strncat(dst, "FPGA image built", len-1); -#if 0 - if(bitparse_find_section('b', &fpga_info, &fpga_info_len) && fpga_info[fpga_info_len-1] == 0 ) { - strncat(dst, " for ", len-1); - strncat(dst, fpga_info, len-1); - } -#endif - if(bitparse_find_section('c', &fpga_info, &fpga_info_len) && fpga_info[fpga_info_len-1] == 0 ) { - strncat(dst, " on ", len-1); - strncat(dst, fpga_info, len-1); - } - if(bitparse_find_section('d', &fpga_info, &fpga_info_len) && fpga_info[fpga_info_len-1] == 0 ) { - strncat(dst, " at ", len-1); - strncat(dst, fpga_info, len-1); - } - } -} //----------------------------------------------------------------------------- // Send a 16 bit command/data pair to the FPGA. @@ -458,3 +490,12 @@ void SetAdcMuxFor(uint32_t whichGpio) HIGH(whichGpio); } + +void Fpga_print_status(void) { + Dbprintf("Currently loaded FPGA image:"); + Dbprintf(" %s", fpga_version_information[downloaded_bitstream-1]); +} + +int FpgaGetCurrent() { + return downloaded_bitstream; +}