X-Git-Url: http://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/47b78133a07719094a01d745c6beea0f0954b615..1523527f94c4c294d0c04d0fd3396ce7eda095e4:/armsrc/iso14443a.c diff --git a/armsrc/iso14443a.c b/armsrc/iso14443a.c index a0fe2326..d3d0138b 100644 --- a/armsrc/iso14443a.c +++ b/armsrc/iso14443a.c @@ -25,6 +25,7 @@ #include "BigBuf.h" #include "protocols.h" #include "parity.h" +#include "fpgaloader.h" typedef struct { enum { @@ -189,13 +190,14 @@ void iso14a_set_trigger(bool enable) { void iso14a_set_timeout(uint32_t timeout) { - iso14a_timeout = timeout - (DELAY_AIR2ARM_AS_READER + DELAY_ARM2AIR_AS_READER)/(16*8); + // adjust timeout by FPGA delays and 2 additional ssp_frames to detect SOF + iso14a_timeout = timeout + (DELAY_AIR2ARM_AS_READER + DELAY_ARM2AIR_AS_READER)/(16*8) + 2; if(MF_DBGLEVEL >= 3) Dbprintf("ISO14443A Timeout set to %ld (%dms)", timeout, timeout / 106); } uint32_t iso14a_get_timeout(void) { - return iso14a_timeout + (DELAY_AIR2ARM_AS_READER + DELAY_ARM2AIR_AS_READER)/(16*8); + return iso14a_timeout - (DELAY_AIR2ARM_AS_READER + DELAY_ARM2AIR_AS_READER)/(16*8) - 2; } //----------------------------------------------------------------------------- @@ -317,15 +319,18 @@ static RAMFUNC bool MillerDecoding(uint8_t bit, uint32_t non_real_time) Uart.startTime -= Uart.syncBit; Uart.endTime = Uart.startTime; Uart.state = STATE_START_OF_COMMUNICATION; + LED_B_ON(); } } else { if (IsMillerModulationNibble1(Uart.fourBits >> Uart.syncBit)) { if (IsMillerModulationNibble2(Uart.fourBits >> Uart.syncBit)) { // Modulation in both halves - error + LED_B_OFF(); UartReset(); } else { // Modulation in first half = Sequence Z = logic "0" if (Uart.state == STATE_MILLER_X) { // error - must not follow after X + LED_B_OFF(); UartReset(); } else { Uart.bitCount++; @@ -364,6 +369,7 @@ static RAMFUNC bool MillerDecoding(uint8_t bit, uint32_t non_real_time) } } else { // no modulation in both halves - Sequence Y if (Uart.state == STATE_MILLER_Z || Uart.state == STATE_MILLER_Y) { // Y after logic "0" - End of Communication + LED_B_OFF(); Uart.state = STATE_UNSYNCD; Uart.bitCount--; // last "0" was part of EOC sequence Uart.shiftReg <<= 1; // drop it @@ -385,6 +391,7 @@ static RAMFUNC bool MillerDecoding(uint8_t bit, uint32_t non_real_time) } } if (Uart.state == STATE_START_OF_COMMUNICATION) { // error - must not follow directly after SOC + LED_B_OFF(); UartReset(); } else { // a logic "0" Uart.bitCount++; @@ -490,6 +497,7 @@ static RAMFUNC int ManchesterDecoding(uint8_t bit, uint16_t offset, uint32_t non Demod.startTime -= Demod.syncBit; Demod.bitCount = offset; // number of decoded data bits Demod.state = DEMOD_MANCHESTER_DATA; + LED_C_ON(); } } @@ -532,6 +540,7 @@ static RAMFUNC int ManchesterDecoding(uint8_t bit, uint16_t offset, uint32_t non } Demod.endTime = Demod.startTime + 8*(9*Demod.len + Demod.bitCount + 1); } else { // no modulation in both halves - End of communication + LED_C_OFF(); if(Demod.bitCount > 0) { // there are some remaining data bits Demod.shiftReg >>= (9 - Demod.bitCount); // right align the decoded bits Demod.output[Demod.len++] = Demod.shiftReg & 0xff; // and add them to the output @@ -572,6 +581,7 @@ void RAMFUNC SnoopIso14443a(uint8_t param) { // bit 1 - trigger from first reader 7-bit request LEDsoff(); + LED_A_ON(); iso14443a_setup(FPGA_HF_ISO14443A_SNIFFER); @@ -624,7 +634,6 @@ void RAMFUNC SnoopIso14443a(uint8_t param) { break; } - LED_A_ON(); WDT_HIT(); int register readBufDataP = data - dmaBuf; @@ -656,18 +665,15 @@ void RAMFUNC SnoopIso14443a(uint8_t param) { AT91C_BASE_PDC_SSC->PDC_RNCR = DMA_BUFFER_SIZE; } - LED_A_OFF(); - if (rsamples & 0x01) { // Need two samples to feed Miller and Manchester-Decoder if(!TagIsActive) { // no need to try decoding reader data if the tag is sending uint8_t readerdata = (previous_data & 0xF0) | (*data >> 4); if (MillerDecoding(readerdata, (rsamples-1)*4)) { - LED_C_ON(); - // check - if there is a short 7bit request from reader - if ((!triggered) && (param & 0x02) && (Uart.len == 1) && (Uart.bitCount == 7)) triggered = true; - + if ((!triggered) && (param & 0x02) && (Uart.len == 1) && (Uart.bitCount == 7)) { + triggered = true; + } if(triggered) { if (!LogTrace(receivedCmd, Uart.len, @@ -681,31 +687,24 @@ void RAMFUNC SnoopIso14443a(uint8_t param) { /* And also reset the demod code, which might have been */ /* false-triggered by the commands from the reader. */ DemodReset(); - LED_B_OFF(); } ReaderIsActive = (Uart.state != STATE_UNSYNCD); } - if(!ReaderIsActive) { // no need to try decoding tag data if the reader is sending - and we cannot afford the time + if (!ReaderIsActive) { // no need to try decoding tag data if the reader is sending - and we cannot afford the time uint8_t tagdata = (previous_data << 4) | (*data & 0x0F); - if(ManchesterDecoding(tagdata, 0, (rsamples-1)*4)) { - LED_B_ON(); - + if (ManchesterDecoding(tagdata, 0, (rsamples-1)*4)) { if (!LogTrace(receivedResponse, Demod.len, Demod.startTime*16 - DELAY_TAG_AIR2ARM_AS_SNIFFER, Demod.endTime*16 - DELAY_TAG_AIR2ARM_AS_SNIFFER, Demod.parity, false)) break; - if ((!triggered) && (param & 0x01)) triggered = true; - // And ready to receive another response. DemodReset(); // And reset the Miller decoder including itS (now outdated) input buffer UartInit(receivedCmd, receivedCmdPar); - - LED_C_OFF(); } TagIsActive = (Demod.state != DEMOD_UNSYNCD); } @@ -719,12 +718,12 @@ void RAMFUNC SnoopIso14443a(uint8_t param) { } } // main cycle - DbpString("COMMAND FINISHED"); - FpgaDisableSscDma(); + LEDsoff(); + + DbpString("COMMAND FINISHED"); Dbprintf("maxDataLen=%d, Uart.state=%x, Uart.len=%d", maxDataLen, Uart.state, Uart.len); Dbprintf("traceLen=%d, Uart.output[0]=%08x", BigBuf_get_traceLen(), (uint32_t)Uart.output[0]); - LEDsoff(); } //----------------------------------------------------------------------------- @@ -1219,7 +1218,7 @@ void SimulateIso14443aTag(int tagType, int uid_1st, int uid_2nd, byte_t* data) EmSendPrecompiledCmd(p_response); } - if (!tracing) { + if (!get_tracing()) { Dbprintf("Trace Full. Simulation stopped."); break; } @@ -1265,7 +1264,7 @@ static void PrepareDelayedTransfer(uint16_t delay) //------------------------------------------------------------------------------------- static void TransmitFor14443a(const uint8_t *cmd, uint16_t len, uint32_t *timing) { - + LED_D_ON(); FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_MOD); uint32_t ThisTransferTime = 0; @@ -1404,7 +1403,7 @@ int EmGetCmd(uint8_t *received, uint16_t *len, uint8_t *parity) ADC_MODE_PRESCALE(63) | ADC_MODE_STARTUP_TIME(1) | ADC_MODE_SAMPLE_HOLD_TIME(15); - AT91C_BASE_ADC->ADC_CHER = ADC_CHANNEL(ADC_CHAN_HF); + AT91C_BASE_ADC->ADC_CHER = ADC_CHANNEL(ADC_CHAN_HF_LOW); // start ADC AT91C_BASE_ADC->ADC_CR = AT91C_ADC_START; @@ -1431,12 +1430,12 @@ int EmGetCmd(uint8_t *received, uint16_t *len, uint8_t *parity) if (BUTTON_PRESS()) return 1; // test if the field exists - if (AT91C_BASE_ADC->ADC_SR & ADC_END_OF_CONVERSION(ADC_CHAN_HF)) { + if (AT91C_BASE_ADC->ADC_SR & ADC_END_OF_CONVERSION(ADC_CHAN_HF_LOW)) { analogCnt++; - analogAVG += AT91C_BASE_ADC->ADC_CDR[ADC_CHAN_HF]; + analogAVG += AT91C_BASE_ADC->ADC_CDR[ADC_CHAN_HF_LOW]; AT91C_BASE_ADC->ADC_CR = AT91C_ADC_START; if (analogCnt >= 32) { - if ((MAX_ADC_HF_VOLTAGE * (analogAVG / analogCnt) >> 10) < MF_MINFIELDV) { + if ((MAX_ADC_HF_VOLTAGE_LOW * (analogAVG / analogCnt) >> 10) < MF_MINFIELDV) { vtime = GetTickCount(); if (!timer) timer = vtime; // 50ms no field --> card to idle state @@ -1469,6 +1468,7 @@ static int EmSendCmd14443aRaw(uint8_t *resp, uint16_t respLen) bool correctionNeeded; // Modulate Manchester + LED_D_OFF(); FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_TAGSIM_MOD); // include correction bit if necessary @@ -1618,9 +1618,7 @@ void ReaderTransmitBitsPar(uint8_t* frame, uint16_t bits, uint8_t *par, uint32_t LED_A_ON(); // Log reader command in trace buffer - if (tracing) { - LogTrace(frame, nbytes(bits), LastTimeProxToAirStart*16 + DELAY_ARM2AIR_AS_READER, (LastTimeProxToAirStart + LastProxToAirDuration)*16 + DELAY_ARM2AIR_AS_READER, par, true); - } + LogTrace(frame, nbytes(bits), LastTimeProxToAirStart*16 + DELAY_ARM2AIR_AS_READER, (LastTimeProxToAirStart + LastProxToAirDuration)*16 + DELAY_ARM2AIR_AS_READER, par, true); } @@ -1651,9 +1649,7 @@ void ReaderTransmit(uint8_t* frame, uint16_t len, uint32_t *timing) static int ReaderReceiveOffset(uint8_t* receivedAnswer, uint16_t offset, uint8_t *parity) { if (!GetIso14443aAnswerFromTag(receivedAnswer, parity, offset)) return false; - if (tracing) { - LogTrace(receivedAnswer, Demod.len, Demod.startTime*16 - DELAY_AIR2ARM_AS_READER, Demod.endTime*16 - DELAY_AIR2ARM_AS_READER, parity, false); - } + LogTrace(receivedAnswer, Demod.len, Demod.startTime*16 - DELAY_AIR2ARM_AS_READER, Demod.endTime*16 - DELAY_AIR2ARM_AS_READER, parity, false); return Demod.len; } @@ -1661,9 +1657,7 @@ static int ReaderReceiveOffset(uint8_t* receivedAnswer, uint16_t offset, uint8_t int ReaderReceive(uint8_t *receivedAnswer, uint8_t *parity) { if (!GetIso14443aAnswerFromTag(receivedAnswer, parity, 0)) return false; - if (tracing) { - LogTrace(receivedAnswer, Demod.len, Demod.startTime*16 - DELAY_AIR2ARM_AS_READER, Demod.endTime*16 - DELAY_AIR2ARM_AS_READER, parity, false); - } + LogTrace(receivedAnswer, Demod.len, Demod.startTime*16 - DELAY_AIR2ARM_AS_READER, Demod.endTime*16 - DELAY_AIR2ARM_AS_READER, parity, false); return Demod.len; } @@ -1776,7 +1770,9 @@ int iso14443a_select_card(byte_t *uid_ptr, iso14a_card_select_t *p_hi14a_card, u if (anticollision) { // SELECT_ALL ReaderTransmit(sel_all, sizeof(sel_all), NULL); - if (!ReaderReceive(resp, resp_par)) return 0; + if (!ReaderReceive(resp, resp_par)) { + return 0; + } if (Demod.collisionPos) { // we had a collision and need to construct the UID bit by bit memset(uid_resp, 0, 4); @@ -1798,7 +1794,9 @@ int iso14443a_select_card(byte_t *uid_ptr, iso14a_card_select_t *p_hi14a_card, u } collision_answer_offset = uid_resp_bits%8; ReaderTransmitBits(sel_uid, 16 + uid_resp_bits, NULL); - if (!ReaderReceiveOffset(resp, collision_answer_offset, resp_par)) return 0; + if (!ReaderReceiveOffset(resp, collision_answer_offset, resp_par)) { + return 0; + } } // finally, add the last bits and BCC of the UID for (uint16_t i = collision_answer_offset; i < (Demod.len-1)*8; i++, uid_resp_bits++) { @@ -1832,7 +1830,9 @@ int iso14443a_select_card(byte_t *uid_ptr, iso14a_card_select_t *p_hi14a_card, u ReaderTransmit(sel_uid, sizeof(sel_uid), NULL); // Receive the SAK - if (!ReaderReceive(resp, resp_par)) return 0; + if (!ReaderReceive(resp, resp_par)) { + return 0; + } sak = resp[0]; // Test if more parts of the uid are coming @@ -1867,7 +1867,9 @@ int iso14443a_select_card(byte_t *uid_ptr, iso14a_card_select_t *p_hi14a_card, u AppendCrc14443a(rats, 2); ReaderTransmit(rats, sizeof(rats), NULL); - if (!(len = ReaderReceive(resp, resp_par))) return 0; + if (!(len = ReaderReceive(resp, resp_par))) { + return 0; + } if(p_hi14a_card) { memcpy(p_hi14a_card->ats, resp, len); @@ -1888,7 +1890,7 @@ int iso14443a_select_card(byte_t *uid_ptr, iso14a_card_select_t *p_hi14a_card, u void iso14443a_setup(uint8_t fpga_minor_mode) { FpgaDownloadAndGo(FPGA_BITSTREAM_HF); // Set up the synchronous serial port - FpgaSetupSsc(); + FpgaSetupSsc(FPGA_MAJOR_MODE_HF_ISO14443A); // connect Demodulated Signal to ADC: SetAdcMuxFor(GPIO_MUXSEL_HIPKD); @@ -1934,15 +1936,24 @@ b8 b7 b6 b5 b4 b3 b2 b1 b5,b6 = 00 - DESELECT 11 - WTX */ -int iso14_apdu(uint8_t *cmd, uint16_t cmd_len, void *data) { +int iso14_apdu(uint8_t *cmd, uint16_t cmd_len, bool send_chaining, void *data, uint8_t *res) { uint8_t parity[MAX_PARITY_SIZE]; uint8_t real_cmd[cmd_len + 4]; - // ISO 14443 APDU frame: PCB [CID] [NAD] APDU CRC PCB=0x02 - real_cmd[0] = 0x02; // bnr,nad,cid,chn=0; i-block(0x00) - // put block number into the PCB - real_cmd[0] |= iso14_pcb_blocknum; - memcpy(real_cmd + 1, cmd, cmd_len); + if (cmd_len) { + // ISO 14443 APDU frame: PCB [CID] [NAD] APDU CRC PCB=0x02 + real_cmd[0] = 0x02; // bnr,nad,cid,chn=0; i-block(0x00) + if (send_chaining) { + real_cmd[0] |= 0x10; + } + // put block number into the PCB + real_cmd[0] |= iso14_pcb_blocknum; + memcpy(real_cmd + 1, cmd, cmd_len); + } else { + // R-block. ACK + real_cmd[0] = 0xA2; // r-block + ACK + real_cmd[0] |= iso14_pcb_blocknum; + } AppendCrc14443a(real_cmd, cmd_len + 1); ReaderTransmit(real_cmd, cmd_len + 3, NULL); @@ -1954,10 +1965,10 @@ int iso14_apdu(uint8_t *cmd, uint16_t cmd_len, void *data) { return 0; //DATA LINK ERROR } else{ // S-Block WTX - while((data_bytes[0] & 0xF2) == 0xF2) { - uint32_t save_iso14a_timeout = iso14a_timeout; + while(len && ((data_bytes[0] & 0xF2) == 0xF2)) { + uint32_t save_iso14a_timeout = iso14a_get_timeout(); // temporarily increase timeout - iso14a_timeout = MAX((data_bytes[1] & 0x3f) * iso14a_timeout, MAX_ISO14A_TIMEOUT); + iso14a_set_timeout(MAX((data_bytes[1] & 0x3f) * save_iso14a_timeout, MAX_ISO14A_TIMEOUT)); // Transmit WTX back // byte1 - WTXM [1..59]. command FWT=FWT*WTXM data_bytes[1] = data_bytes[1] & 0x3f; // 2 high bits mandatory set to 0b @@ -1969,7 +1980,7 @@ int iso14_apdu(uint8_t *cmd, uint16_t cmd_len, void *data) { len = ReaderReceive(data, parity); data_bytes = data; // restore timeout - iso14a_timeout = save_iso14a_timeout; + iso14a_set_timeout(save_iso14a_timeout); } // if we received an I- or R(ACK)-Block with a block number equal to the @@ -1981,20 +1992,26 @@ int iso14_apdu(uint8_t *cmd, uint16_t cmd_len, void *data) { { iso14_pcb_blocknum ^= 1; } + + // if we received I-block with chaining we need to send ACK and receive another block of data + if (res) + *res = data_bytes[0]; // crc check - if (len >=3 && !CheckCrc14443(CRC_14443_A, data_bytes, len)) { + if (len >= 3 && !CheckCrc14443(CRC_14443_A, data_bytes, len)) { return -1; } } - // cut frame byte - len -= 1; - // memmove(data_bytes, data_bytes + 1, len); - for (int i = 0; i < len; i++) - data_bytes[i] = data_bytes[i + 1]; - + if (len) { + // cut frame byte + len -= 1; + // memmove(data_bytes, data_bytes + 1, len); + for (int i = 0; i < len; i++) + data_bytes[i] = data_bytes[i + 1]; + } + return len; } @@ -2037,7 +2054,7 @@ void ReaderIso14443a(UsbCommand *c) // 1 - all is OK with ATS, 2 - without ATS cantSELECT = true; } - + FpgaDisableTracing(); LED_B_ON(); cmd_send(CMD_ACK,arg0,card->uidlen,0,buf,sizeof(iso14a_card_select_t)); LED_B_OFF(); @@ -2049,9 +2066,11 @@ void ReaderIso14443a(UsbCommand *c) } if(param & ISO14A_APDU && !cantSELECT) { - arg0 = iso14_apdu(cmd, len, buf); + uint8_t res; + arg0 = iso14_apdu(cmd, len, (param & ISO14A_SEND_CHAINING), buf, &res); + FpgaDisableTracing(); LED_B_ON(); - cmd_send(CMD_ACK, arg0, 0, 0, buf, sizeof(buf)); + cmd_send(CMD_ACK, arg0, res, 0, buf, sizeof(buf)); LED_B_OFF(); } @@ -2091,6 +2110,7 @@ void ReaderIso14443a(UsbCommand *c) } } arg0 = ReaderReceive(buf, par); + FpgaDisableTracing(); LED_B_ON(); cmd_send(CMD_ACK,arg0,0,0,buf,sizeof(buf)); @@ -2150,9 +2170,7 @@ void ReaderMifare(bool first_try) uint8_t receivedAnswer[MAX_MIFARE_FRAME_SIZE]; uint8_t receivedAnswerPar[MAX_MIFARE_PARITY_SIZE]; - if (first_try) { - iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD); - } + iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD); // free eventually allocated BigBuf memory. We want all for tracing. BigBuf_free(); @@ -2160,9 +2178,9 @@ void ReaderMifare(bool first_try) clear_trace(); set_tracing(true); - byte_t nt_diff = 0; + uint8_t nt_diff = 0; uint8_t par[1] = {0}; // maximum 8 Bytes to be sent here, 1 byte parity is therefore enough - static byte_t par_low = 0; + static uint8_t par_low = 0; bool led_on = true; uint8_t uid[10] ={0}; uint32_t cuid; @@ -2170,11 +2188,11 @@ void ReaderMifare(bool first_try) uint32_t nt = 0; uint32_t previous_nt = 0; static uint32_t nt_attacked = 0; - byte_t par_list[8] = {0x00}; - byte_t ks_list[8] = {0x00}; + uint8_t par_list[8] = {0x00}; + uint8_t ks_list[8] = {0x00}; #define PRNG_SEQUENCE_LENGTH (1 << 16); - static uint32_t sync_time; + uint32_t sync_time = GetCountSspClk() & 0xfffffff8; static int32_t sync_cycles; int catch_up_cycles = 0; int last_catch_up = 0; @@ -2184,10 +2202,9 @@ void ReaderMifare(bool first_try) if (first_try) { mf_nr_ar3 = 0; - sync_time = GetCountSspClk() & 0xfffffff8; + par[0] = par_low = 0; sync_cycles = PRNG_SEQUENCE_LENGTH; // theory: Mifare Classic's random generator repeats every 2^16 cycles (and so do the tag nonces). nt_attacked = 0; - par[0] = 0; } else { // we were unsuccessful on a previous call. Try another READER nonce (first 3 parity bits remain the same) @@ -2203,6 +2220,7 @@ void ReaderMifare(bool first_try) #define MAX_UNEXPECTED_RANDOM 4 // maximum number of unexpected (i.e. real) random numbers when trying to sync. Then give up. #define MAX_SYNC_TRIES 32 + #define SYNC_TIME_BUFFER 16 // if there is only SYNC_TIME_BUFFER left before next planned sync, wait for next PRNG cycle #define NUM_DEBUG_INFOS 8 // per strategy #define MAX_STRATEGY 3 uint16_t unexpected_random = 0; @@ -2252,8 +2270,8 @@ void ReaderMifare(bool first_try) sync_time = (sync_time & 0xfffffff8) + sync_cycles + catch_up_cycles; catch_up_cycles = 0; - // if we missed the sync time already, advance to the next nonce repeat - while(GetCountSspClk() > sync_time) { + // if we missed the sync time already or are about to miss it, advance to the next nonce repeat + while(sync_time < GetCountSspClk() + SYNC_TIME_BUFFER) { elapsed_prng_sequences++; sync_time = (sync_time & 0xfffffff8) + sync_cycles; } @@ -2409,14 +2427,16 @@ void ReaderMifare(bool first_try) } } - byte_t buf[28]; + FpgaDisableTracing(); + + uint8_t buf[32]; memcpy(buf + 0, uid, 4); num_to_bytes(nt, 4, buf + 4); memcpy(buf + 8, par_list, 8); memcpy(buf + 16, ks_list, 8); - memcpy(buf + 24, mf_nr_ar, 4); + memcpy(buf + 24, mf_nr_ar, 8); - cmd_send(CMD_ACK, isOK, 0, 0, buf, 28); + cmd_send(CMD_ACK, isOK, 0, 0, buf, 32); // Thats it... FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); @@ -2437,6 +2457,8 @@ void RAMFUNC SniffMifare(uint8_t param) { // C(red) A(yellow) B(green) LEDsoff(); + LED_A_ON(); + // init trace buffer clear_trace(); set_tracing(true); @@ -2472,8 +2494,6 @@ void RAMFUNC SniffMifare(uint8_t param) { // Setup for the DMA. FpgaSetupSscDma((uint8_t *)dmaBuf, DMA_BUFFER_SIZE); // set transfer address and number of bytes. Start transfer. - LED_D_OFF(); - // init sniffer MfSniffInit(); @@ -2481,11 +2501,10 @@ void RAMFUNC SniffMifare(uint8_t param) { for(uint32_t sniffCounter = 0; true; ) { if(BUTTON_PRESS()) { - DbpString("cancelled by button"); + DbpString("Canceled by button."); break; } - LED_A_ON(); WDT_HIT(); if ((sniffCounter & 0x0000FFFF) == 0) { // from time to time @@ -2531,14 +2550,12 @@ void RAMFUNC SniffMifare(uint8_t param) { AT91C_BASE_PDC_SSC->PDC_RNCR = DMA_BUFFER_SIZE; } - LED_A_OFF(); - if (sniffCounter & 0x01) { if(!TagIsActive) { // no need to try decoding tag data if the reader is sending uint8_t readerdata = (previous_data & 0xF0) | (*data >> 4); if(MillerDecoding(readerdata, (sniffCounter-1)*4)) { - LED_C_INV(); + if (MfSniffLogic(receivedCmd, Uart.len, Uart.parity, Uart.bitCount, true)) break; /* And ready to receive another command. */ @@ -2553,7 +2570,6 @@ void RAMFUNC SniffMifare(uint8_t param) { if(!ReaderIsActive) { // no need to try decoding tag data if the reader is sending uint8_t tagdata = (previous_data << 4) | (*data & 0x0F); if(ManchesterDecoding(tagdata, 0, (sniffCounter-1)*4)) { - LED_C_INV(); if (MfSniffLogic(receivedResponse, Demod.len, Demod.parity, Demod.bitCount, false)) break; @@ -2575,11 +2591,13 @@ void RAMFUNC SniffMifare(uint8_t param) { } // main cycle - DbpString("COMMAND FINISHED"); - FpgaDisableSscDma(); + LEDsoff(); + + DbpString("COMMAND FINISHED."); + + FpgaDisableTracing(); MfSniffEnd(); Dbprintf("maxDataLen=%x, Uart.state=%x, Uart.len=%x", maxDataLen, Uart.state, Uart.len); - LEDsoff(); }