X-Git-Url: http://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/506672c48bdae1b045bb65c2939656806bc8be50..5f84531b82309c5cbb72ea5bdaaee3a1be734eb5:/armsrc/lfops.c

diff --git a/armsrc/lfops.c b/armsrc/lfops.c
index 47fec7c2..1816bdca 100644
--- a/armsrc/lfops.c
+++ b/armsrc/lfops.c
@@ -4,7 +4,7 @@
 // the license.
 //-----------------------------------------------------------------------------
 // Miscellaneous routines for low frequency tag operations.
-// Tags supported here so far are Texas Instruments (TI), HID
+// Tags supported here so far are Texas Instruments (TI), HID, EM4x05, EM410x
 // Also routines for raw mode reading/simulating of LF waveform
 //-----------------------------------------------------------------------------
 
@@ -28,49 +28,103 @@
  */
 void ModThenAcquireRawAdcSamples125k(uint32_t delay_off, uint32_t period_0, uint32_t period_1, uint8_t *command)
 {
+	// start timer
+	StartTicks();
 
-	int divisor_used = 95; // 125 KHz
-	// see if 'h' was specified
+	// use lf config settings
+	sample_config *sc = getSamplingConfig();
 
-	if (command[strlen((char *) command) - 1] == 'h')
-		divisor_used = 88; // 134.8 KHz
-
-	sample_config sc = { 0,0,1, divisor_used, 0};
-	setSamplingConfig(&sc);
-
-	/* Make sure the tag is reset */
+	// Make sure the tag is reset
 	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-	SpinDelay(2500);
+	WaitMS(2500);
 
-	LFSetupFPGAForADC(sc.divisor, 1);
+	// clear read buffer (after fpga bitstream loaded...)
+	BigBuf_Clear_keep_EM();
 
-	// And a little more time for the tag to fully power up
-	SpinDelay(2000);
+	// power on
+	LFSetupFPGAForADC(sc->divisor, 1);
 
+	// And a little more time for the tag to fully power up
+	WaitMS(2000);
+	// if delay_off = 0 then just bitbang 1 = antenna on 0 = off for respective periods.
+	bool bitbang = delay_off == 0;
 	// now modulate the reader field
-	while(*command != '\0' && *command != ' ') {
+
+	if (bitbang) {
+		// HACK it appears the loop and if statements take up about 7us so adjust waits accordingly...
+		uint8_t hack_cnt = 7;
+		if (period_0 < hack_cnt || period_1 < hack_cnt) {
+			DbpString("Warning periods cannot be less than 7us in bit bang mode");
+			FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+			LED_D_OFF();
+			return;
+		}
+
+		// hack2 needed---  it appears to take about 8-16us to turn the antenna back on 
+		// leading to ~ 1 to 2 125khz samples extra in every off period 
+		// so we should test for last 0 before next 1 and reduce period_0 by this extra amount...
+		// but is this time different for every antenna or other hw builds???  more testing needed
+
+		// prime cmd_len to save time comparing strings while modulating
+		int cmd_len = 0;
+		while(command[cmd_len] != '\0' && command[cmd_len] != ' ')
+			cmd_len++;
+
+		int counter = 0;
+		bool off = false;
+		for (counter = 0; counter < cmd_len; counter++) {
+			// if cmd = 0 then turn field off
+			if (command[counter] == '0') {
+				// if field already off leave alone (affects timing otherwise)
+				if (off == false) {
+					FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+					LED_D_OFF();
+					off = true;
+				}
+				// note we appear to take about 7us to switch over (or run the if statements/loop...)
+				WaitUS(period_0-hack_cnt);
+			// else if cmd = 1 then turn field on
+			} else {
+				// if field already on leave alone (affects timing otherwise)
+				if (off) {
+					FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+					LED_D_ON();
+					off = false;
+				}
+				// note we appear to take about 7us to switch over (or run the if statements/loop...)
+				WaitUS(period_1-hack_cnt);
+			}
+		}
+	} else { // old mode of cmd read using delay as off period
+		while(*command != '\0' && *command != ' ') {
+			FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+			LED_D_OFF();
+			WaitUS(delay_off);
+			FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc->divisor);
+			FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+			LED_D_ON();
+			if(*(command++) == '0') {
+				WaitUS(period_0);
+			} else {
+				WaitUS(period_1);
+			}
+		}
 		FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
 		LED_D_OFF();
-		SpinDelayUs(delay_off);
-		FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor);
-
-		FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
-		LED_D_ON();
-		if(*(command++) == '0')
-			SpinDelayUs(period_0);
-		else
-			SpinDelayUs(period_1);
+		WaitUS(delay_off);
+		FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc->divisor);
 	}
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-	LED_D_OFF();
-	SpinDelayUs(delay_off);
-	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor);
 
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
 
 	// now do the read
-	DoAcquisition_config(false);
+	DoAcquisition_config(false, 0);
+
+	// Turn off antenna
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+	// tell client we are done
+	cmd_send(CMD_ACK,0,0,0,0,0);
 }
 
 /* blank r/w tag data stream
@@ -377,7 +431,7 @@ void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc)
 	AcquireTiType();
 
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-	DbpString("Now use tiread to check");
+	DbpString("Now use `lf ti read` to check");
 }
 
 void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
@@ -385,7 +439,8 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
 	int i;
 	uint8_t *tab = BigBuf_get_addr();
 
-	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+	//note FpgaDownloadAndGo destroys the bigbuf so be sure this is called before now...
+	//FpgaDownloadAndGo(FPGA_BITSTREAM_LF);  
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT);
 
 	AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT | GPIO_SSC_CLK;
@@ -399,12 +454,19 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
 	i = 0;
 	for(;;) {
 		//wait until SSC_CLK goes HIGH
+		int ii = 0;
 		while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) {
-			if(BUTTON_PRESS() || (usb_poll_validate_length() )) {
-				DbpString("Stopped");
-				return;
+			//only check every 1000th time (usb_poll_validate_length on some systems was too slow)
+			if ( ii == 1000 ) {
+				if (BUTTON_PRESS() || usb_poll_validate_length() ) {
+					FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+					DbpString("Stopped");
+					return;
+				}
+				ii=0;
 			}
 			WDT_HIT();
+			ii++;
 		}
 		if (ledcontrol)
 			LED_D_ON();
@@ -416,13 +478,20 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
 
 		if (ledcontrol)
 			LED_D_OFF();
+		ii=0;
 		//wait until SSC_CLK goes LOW
 		while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) {
-			if(BUTTON_PRESS()) {
-				DbpString("Stopped");
-				return;
+			//only check every 1000th time (usb_poll_validate_length on some systems was too slow)
+			if ( ii == 1000 ) { 
+				if (BUTTON_PRESS() || usb_poll_validate_length() ) {
+					FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+					DbpString("Stopped");
+					return;
+				}
+				ii=0;
 			}
 			WDT_HIT();
+			ii++;
 		}
 
 		i++;
@@ -434,6 +503,7 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
 				SpinDelayUs(gap);
 			}
 		}
+
 	}
 }
 
@@ -498,7 +568,7 @@ static void fcAll(uint8_t fc, int *n, uint8_t clock, uint16_t *modCnt)
 	uint8_t wavesPerClock = clock/fc;
 	uint8_t mod = clock % fc;    //modifier
 	uint8_t modAdj = fc/mod;     //how often to apply modifier
-	bool modAdjOk = !(fc % mod); //if (fc % mod==0) modAdjOk=TRUE;
+	bool modAdjOk = !(fc % mod); //if (fc % mod==0) modAdjOk=true;
 	// loop through clock - step field clock
 	for (uint8_t idx=0; idx < wavesPerClock; idx++){
 		// put 1/2 FC length 1's and 1/2 0's per field clock wave (to create the wave)
@@ -523,7 +593,7 @@ static void fcAll(uint8_t fc, int *n, uint8_t clock, uint16_t *modCnt)
 
 // prepare a waveform pattern in the buffer based on the ID given then
 // simulate a HID tag until the button is pressed
-void CmdHIDsimTAG(int hi, int lo, int ledcontrol)
+void CmdHIDsimTAG(int hi2, int hi, int lo, int ledcontrol)
 {
 	int n=0, i=0;
 	/*
@@ -536,10 +606,13 @@ void CmdHIDsimTAG(int hi, int lo, int ledcontrol)
 	 nor 1 bits, they are special patterns (a = set of 12 fc8 and b = set of 10 fc10)
 	*/
 
-	if (hi>0xFFF) {
-		DbpString("Tags can only have 44 bits. - USE lf simfsk for larger tags");
+	if (hi2>0x0FFFFFFF) {
+		DbpString("Tags can only have 44 or 84 bits. - USE lf simfsk for larger tags");
 		return;
 	}
+	// set LF so we don't kill the bigbuf we are setting with simulation data.
+	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+
 	fc(0,&n);
 	// special start of frame marker containing invalid bit sequences
 	fc(8,  &n);	fc(8,  &n); // invalid
@@ -548,13 +621,35 @@ void CmdHIDsimTAG(int hi, int lo, int ledcontrol)
 	fc(8,  &n);	fc(10, &n); // logical 0
 
 	WDT_HIT();
-	// manchester encode bits 43 to 32
-	for (i=11; i>=0; i--) {
-		if ((i%4)==3) fc(0,&n);
-		if ((hi>>i)&1) {
-			fc(10, &n); fc(8,  &n);		// low-high transition
-		} else {
-			fc(8,  &n); fc(10, &n);		// high-low transition
+	if (hi2 > 0 || hi > 0xFFF){
+		// manchester encode bits 91 to 64 (91-84 are part of the header)
+		for (i=27; i>=0; i--) {
+			if ((i%4)==3) fc(0,&n);
+			if ((hi2>>i)&1) {
+				fc(10, &n); fc(8,  &n);		// low-high transition
+			} else {
+				fc(8,  &n); fc(10, &n);		// high-low transition
+			}
+		}
+		WDT_HIT();
+		// manchester encode bits 63 to 32
+		for (i=31; i>=0; i--) {
+			if ((i%4)==3) fc(0,&n);
+			if ((hi>>i)&1) {
+				fc(10, &n); fc(8,  &n);		// low-high transition
+			} else {
+				fc(8,  &n); fc(10, &n);		// high-low transition
+			}
+		}
+	} else {
+		// manchester encode bits 43 to 32
+		for (i=11; i>=0; i--) {
+			if ((i%4)==3) fc(0,&n);
+			if ((hi>>i)&1) {
+				fc(10, &n); fc(8,  &n);		// low-high transition
+			} else {
+				fc(8,  &n); fc(10, &n);		// high-low transition
+			}
 		}
 	}
 
@@ -590,6 +685,9 @@ void CmdFSKsimTAG(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
 	uint8_t clk = arg2 & 0xFF;
 	uint8_t invert = (arg2 >> 8) & 1;
 
+	// set LF so we don't kill the bigbuf we are setting with simulation data.
+	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+
 	for (i=0; i<size; i++){
 		if (BitStream[i] == invert){
 			fcAll(fcLow, &n, clk, &modCnt);
@@ -640,6 +738,19 @@ static void biphaseSimBit(uint8_t c, int *n, uint8_t clock, uint8_t *phase)
 		memset(dest+(*n), c ^ *phase, clock);
 		*phase ^= 1;
 	}
+	*n += clock;
+}
+
+static void stAskSimBit(int *n, uint8_t clock) {
+	uint8_t *dest = BigBuf_get_addr();
+	uint8_t halfClk = clock/2;
+	//ST = .5 high .5 low 1.5 high .5 low 1 high	
+	memset(dest+(*n), 1, halfClk);
+	memset(dest+(*n) + halfClk, 0, halfClk);
+	memset(dest+(*n) + clock, 1, clock + halfClk);
+	memset(dest+(*n) + clock*2 + halfClk, 0, halfClk);
+	memset(dest+(*n) + clock*3, 1, clock);
+	*n += clock*4;
 }
 
 // args clock, ask/man or askraw, invert, transmission separator
@@ -652,12 +763,15 @@ void CmdASKsimTag(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
 	uint8_t separator = arg2 & 1;
 	uint8_t invert = (arg2 >> 8) & 1;
 
+	// set LF so we don't kill the bigbuf we are setting with simulation data.
+	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+
 	if (encoding==2){  //biphase
 		uint8_t phase=0;
 		for (i=0; i<size; i++){
 			biphaseSimBit(BitStream[i]^invert, &n, clk, &phase);
 		}
-		if (BitStream[0]==BitStream[size-1]){ //run a second set inverted to keep phase in check
+		if (phase==1) { //run a second set inverted to keep phase in check
 			for (i=0; i<size; i++){
 				biphaseSimBit(BitStream[i]^invert, &n, clk, &phase);
 			}
@@ -666,14 +780,16 @@ void CmdASKsimTag(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
 		for (i=0; i<size; i++){
 			askSimBit(BitStream[i]^invert, &n, clk, encoding);
 		}
-		if (encoding==0 && BitStream[0]==BitStream[size-1]){ //run a second set inverted (for biphase phase)
+		if (encoding==0 && BitStream[0]==BitStream[size-1]){ //run a second set inverted (for ask/raw || biphase phase)
 			for (i=0; i<size; i++){
 				askSimBit(BitStream[i]^invert^1, &n, clk, encoding);
 			}
 		}
 	}
-	
-	if (separator==1) Dbprintf("sorry but separator option not yet available"); 
+	if (separator==1 && encoding == 1)
+		stAskSimBit(&n, clk);
+	else if (separator==1)
+		Dbprintf("sorry but separator option not yet available");
 
 	Dbprintf("Simulating with clk: %d, invert: %d, encoding: %d, separator: %d, n: %d",clk, invert, encoding, separator, n);
 	//DEBUG
@@ -683,7 +799,7 @@ void CmdASKsimTag(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
 	//Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
 	//i+=16;
 	//Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
-
+	
 	if (ledcontrol) LED_A_ON();
 	SimulateTagLowFrequency(n, 0, ledcontrol);
 	if (ledcontrol) LED_A_OFF();
@@ -721,11 +837,14 @@ void CmdPSKsimTag(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
 	uint8_t carrier = arg1 & 0xFF;
 	uint8_t invert = arg2 & 0xFF;
 	uint8_t curPhase = 0;
+	// set LF so we don't kill the bigbuf we are setting with simulation data.
+	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+
 	for (i=0; i<size; i++){
 		if (BitStream[i] == curPhase){
-			pskSimBit(carrier, &n, clk, &curPhase, FALSE);
+			pskSimBit(carrier, &n, clk, &curPhase, false);
 		} else {
-			pskSimBit(carrier, &n, clk, &curPhase, TRUE);
+			pskSimBit(carrier, &n, clk, &curPhase, true);
 		}
 	}
 	Dbprintf("Simulating with Carrier: %d, clk: %d, invert: %d, n: %d",carrier, clk, invert, n);
@@ -742,18 +861,21 @@ void CmdPSKsimTag(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
 }
 
 // loop to get raw HID waveform then FSK demodulate the TAG ID from it
-void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
+void CmdHIDdemodFSK(int findone, int *high2, int *high, int *low, int ledcontrol)
 {
 	uint8_t *dest = BigBuf_get_addr();
 	//const size_t sizeOfBigBuff = BigBuf_max_traceLen();
 	size_t size; 
 	uint32_t hi2=0, hi=0, lo=0;
 	int idx=0;
+	int dummyIdx = 0;
 	// Configure to go in 125Khz listen mode
 	LFSetupFPGAForADC(95, true);
 
-	while(!BUTTON_PRESS() && !usb_poll_validate_length()) {
+	//clear read buffer
+	BigBuf_Clear_keep_EM();
 
+	while(!BUTTON_PRESS() && !usb_poll_validate_length()) {
 		WDT_HIT();
 		if (ledcontrol) LED_A_ON();
 
@@ -761,72 +883,84 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
 		// FSK demodulator
 		//size = sizeOfBigBuff;  //variable size will change after demod so re initialize it before use
 		size = 50*128*2; //big enough to catch 2 sequences of largest format
-		idx = HIDdemodFSK(dest, &size, &hi2, &hi, &lo);
+		idx = HIDdemodFSK(dest, &size, &hi2, &hi, &lo, &dummyIdx);
 		
 		if (idx>0 && lo>0 && (size==96 || size==192)){
+			uint8_t bitlen = 0;
+			uint32_t fc = 0;
+			uint32_t cardnum = 0;
+			bool decoded = false;
+
 			// go over previously decoded manchester data and decode into usable tag ID
-			if (hi2 != 0){ //extra large HID tags  88/192 bits
-				Dbprintf("TAG ID: %x%08x%08x (%d)",
-				  (unsigned int) hi2, (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
-			}else {  //standard HID tags 44/96 bits
-				//Dbprintf("TAG ID: %x%08x (%d)",(unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF); //old print cmd
-				uint8_t bitlen = 0;
-				uint32_t fc = 0;
-				uint32_t cardnum = 0;
-				if (((hi>>5)&1) == 1){//if bit 38 is set then < 37 bit format is used
-					uint32_t lo2=0;
-					lo2=(((hi & 31) << 12) | (lo>>20)); //get bits 21-37 to check for format len bit
-					uint8_t idx3 = 1;
-					while(lo2 > 1){ //find last bit set to 1 (format len bit)
-						lo2=lo2 >> 1;
-						idx3++;
-					}
-					bitlen = idx3+19;
-					fc =0;
-					cardnum=0;
-					if(bitlen == 26){
-						cardnum = (lo>>1)&0xFFFF;
-						fc = (lo>>17)&0xFF;
-					}
-					if(bitlen == 37){
-						cardnum = (lo>>1)&0x7FFFF;
-						fc = ((hi&0xF)<<12)|(lo>>20);
-					}
-					if(bitlen == 34){
-						cardnum = (lo>>1)&0xFFFF;
-						fc= ((hi&1)<<15)|(lo>>17);
-					}
-					if(bitlen == 35){
-						cardnum = (lo>>1)&0xFFFFF;
-						fc = ((hi&1)<<11)|(lo>>21);
-					}
+			if ((hi2 & 0x000FFFF) != 0){ //extra large HID tags  88/192 bits
+				uint32_t bp = hi2 & 0x000FFFFF;
+				bitlen = 63;
+				while (bp > 0) {
+					bp = bp >> 1;
+					bitlen++;
 				}
-				else { //if bit 38 is not set then 37 bit format is used
-					bitlen= 37;
-					fc =0;
-					cardnum=0;
-					if(bitlen==37){
-						cardnum = (lo>>1)&0x7FFFF;
-						fc = ((hi&0xF)<<12)|(lo>>20);
-					}
+			} else if ((hi >> 6) > 0) {
+				uint32_t bp = hi;
+				bitlen = 31;
+				while (bp > 0) {
+					bp = bp >> 1;
+					bitlen++;
+				}
+			} else if (((hi >> 5) & 1) == 0) {
+				bitlen = 37;
+			} else if ((hi & 0x0000001F) > 0 ) {
+				uint32_t bp = (hi & 0x0000001F);
+				bitlen = 31;
+				while (bp > 0) {
+					bp = bp >> 1;
+					bitlen++;
+				}
+			} else {
+				uint32_t bp = lo;
+				bitlen = 0;
+				while (bp > 0) {
+					bp = bp >> 1;
+					bitlen++;
 				}
-				//Dbprintf("TAG ID: %x%08x (%d)",
-				// (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
-				Dbprintf("TAG ID: %x%08x (%d) - Format Len: %dbit - FC: %d - Card: %d",
-						 (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF,
-						 (unsigned int) bitlen, (unsigned int) fc, (unsigned int) cardnum);
 			}
+			switch (bitlen){
+				case 26:
+					cardnum = (lo>>1)&0xFFFF;
+					fc = (lo>>17)&0xFF;
+					decoded = true;
+					break;
+				case 35:
+					cardnum = (lo>>1)&0xFFFFF;
+					fc = ((hi&1)<<11)|(lo>>21);
+					decoded = true;
+					break;
+			}
+				
+			if (hi2 != 0) //extra large HID tags  88/192 bits
+				Dbprintf("TAG ID: %x%08x%08x (%d)",
+					(unsigned int) hi2, (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
+			else 
+				Dbprintf("TAG ID: %x%08x (%d)",
+					(unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
+			
+			if (decoded)
+				Dbprintf("Format Len: %dbits - FC: %d - Card: %d",
+					(unsigned int) bitlen, (unsigned int) fc, (unsigned int) cardnum);
+
 			if (findone){
 				if (ledcontrol)	LED_A_OFF();
+				*high2 = hi2;
 				*high = hi;
 				*low = lo;
-				return;
+				break;
 			}
 			// reset
 		}
 		hi2 = hi = lo = idx = 0;
 		WDT_HIT();
 	}
+
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
 	DbpString("Stopped");
 	if (ledcontrol) LED_A_OFF();
 }
@@ -836,7 +970,9 @@ void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
 {
 	uint8_t *dest = BigBuf_get_addr();
 	size_t size; 
-	int idx=0;
+	int idx=0, dummyIdx=0;
+	//clear read buffer
+	BigBuf_Clear_keep_EM();
 	// Configure to go in 125Khz listen mode
 	LFSetupFPGAForADC(95, true);
 
@@ -848,7 +984,7 @@ void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
 		DoAcquisition_default(-1,true);
 		// FSK demodulator
 		size = 50*128*2; //big enough to catch 2 sequences of largest format
-		idx = AWIDdemodFSK(dest, &size);
+		idx = AWIDdemodFSK(dest, &size, &dummyIdx);
 		
 		if (idx<=0 || size!=96) continue;
 		// Index map
@@ -909,12 +1045,13 @@ void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
 		}
 		if (findone){
 			if (ledcontrol)	LED_A_OFF();
-			return;
+			break;
 		}
 		// reset
 		idx = 0;
 		WDT_HIT();
 	}
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
 	DbpString("Stopped");
 	if (ledcontrol) LED_A_OFF();
 }
@@ -927,6 +1064,8 @@ void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol)
 	int clk=0, invert=0, errCnt=0, maxErr=20;
 	uint32_t hi=0;
 	uint64_t lo=0;
+	//clear read buffer
+	BigBuf_Clear_keep_EM();
 	// Configure to go in 125Khz listen mode
 	LFSetupFPGAForADC(95, true);
 
@@ -967,13 +1106,14 @@ void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol)
 				if (ledcontrol) LED_A_OFF();
 				*high=lo>>32;
 				*low=lo & 0xFFFFFFFF;
-				return;
+				break;
 			}
 		}
 		WDT_HIT();
 		hi = lo = size = idx = 0;
 		clk = invert = errCnt = 0;
 	}
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
 	DbpString("Stopped");
 	if (ledcontrol) LED_A_OFF();
 }
@@ -986,6 +1126,9 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
 	uint8_t version=0;
 	uint8_t facilitycode=0;
 	uint16_t number=0;
+	int dummyIdx=0;
+	//clear read buffer
+	BigBuf_Clear_keep_EM();
 	// Configure to go in 125Khz listen mode
 	LFSetupFPGAForADC(95, true);
 
@@ -995,7 +1138,7 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
 		DoAcquisition_default(-1,true);
 		//fskdemod and get start index
 		WDT_HIT();
-		idx = IOdemodFSK(dest, BigBuf_max_traceLen());
+		idx = IOdemodFSK(dest, BigBuf_max_traceLen(), &dummyIdx);
 		if (idx<0) continue;
 		//valid tag found
 
@@ -1030,7 +1173,7 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
 			//LED_A_OFF();
 			*high=code;
 			*low=code2;
-			return;
+			break;
 		}
 		code=code2=0;
 		version=facilitycode=0;
@@ -1039,6 +1182,7 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
 
 		WDT_HIT();
 	}
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
 	DbpString("Stopped");
 	if (ledcontrol) LED_A_OFF();
 }
@@ -1062,7 +1206,7 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
 void TurnReadLFOn(int delay) {
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
 	// Give it a bit of time for the resonant antenna to settle.
-	SpinDelayUs(delay); //155*8 //50*8
+	WaitUS(delay); //155*8 //50*8
 }
 
 // Write one bit to card
@@ -1072,31 +1216,33 @@ void T55xxWriteBit(int bit) {
 	else
 		TurnReadLFOn(WRITE_1);
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-	SpinDelayUs(WRITE_GAP);
+	WaitUS(WRITE_GAP);
 }
 
 // Send T5577 reset command then read stream (see if we can identify the start of the stream)
 void T55xxResetRead(void) {
 	LED_A_ON();
 	//clear buffer now so it does not interfere with timing later
-	BigBuf_Clear_ext(false);
+	BigBuf_Clear_keep_EM();
 
 	// Set up FPGA, 125kHz
 	LFSetupFPGAForADC(95, true);
-
+	StartTicks();
+	// make sure tag is fully powered up...
+	WaitMS(5);
+	
 	// Trigger T55x7 in mode.
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-	SpinDelayUs(START_GAP);
+	WaitUS(START_GAP);
 
 	// reset tag - op code 00
 	T55xxWriteBit(0);
 	T55xxWriteBit(0);
 
-	// Turn field on to read the response
 	TurnReadLFOn(READ_GAP);
 
 	// Acquisition
-	doT55x7Acquisition(BigBuf_max_traceLen());
+	DoPartialAcquisition(0, true, BigBuf_max_traceLen(), 0);
 
 	// Turn the field off
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
@@ -1109,19 +1255,24 @@ void T55xxWriteBlockExt(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg
 	LED_A_ON();
 	bool PwdMode = arg & 0x1;
 	uint8_t Page = (arg & 0x2)>>1;
+	bool testMode = arg & 0x4;
 	uint32_t i = 0;
 
 	// Set up FPGA, 125kHz
 	LFSetupFPGAForADC(95, true);
-
+	StartTicks();
+	// make sure tag is fully powered up...
+	WaitMS(5);
 	// Trigger T55x7 in mode.
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-	SpinDelayUs(START_GAP);
+	WaitUS(START_GAP);
 
-	// Opcode 10
-	T55xxWriteBit(1);
-	T55xxWriteBit(Page); //Page 0
-	if (PwdMode){
+	if (testMode) Dbprintf("TestMODE");
+	// Std Opcode 10
+	T55xxWriteBit(testMode ? 0 : 1);
+	T55xxWriteBit(testMode ? 1 : Page); //Page 0
+
+	if (PwdMode) {
 		// Send Pwd
 		for (i = 0x80000000; i != 0; i >>= 1)
 			T55xxWriteBit(Pwd & i);
@@ -1139,11 +1290,31 @@ void T55xxWriteBlockExt(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg
 
 	// Perform write (nominal is 5.6 ms for T55x7 and 18ms for E5550,
 	// so wait a little more)
-	TurnReadLFOn(20 * 1000);
+
+	// "there is a clock delay before programming" 
+	//  - programming takes ~5.6ms for t5577 ~18ms for E5550 or t5567
+	//  so we should wait 1 clock + 5.6ms then read response? 
+	//  but we need to know we are dealing with t5577 vs t5567 vs e5550 (or q5) marshmellow...
+	if (testMode) {
+		//TESTMODE TIMING TESTS: 
+		// <566us does nothing 
+		// 566-568 switches between wiping to 0s and doing nothing
+		// 5184 wipes and allows 1 block to be programmed.
+		// indefinite power on wipes and then programs all blocks with bitshifted data sent.
+		TurnReadLFOn(5184); 
+
+	} else {
+		TurnReadLFOn(20 * 1000);
 		//could attempt to do a read to confirm write took
 		// as the tag should repeat back the new block 
 		// until it is reset, but to confirm it we would 
-		// need to know the current block 0 config mode
+		// need to know the current block 0 config mode for
+		// modulation clock an other details to demod the response...
+		// response should be (for t55x7) a 0 bit then (ST if on) 
+		// block data written in on repeat until reset. 
+
+		//DoPartialAcquisition(20, true, 12000);
+	}
 
 	// turn field off
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
@@ -1162,7 +1333,7 @@ void T55xxReadBlock(uint16_t arg0, uint8_t Block, uint32_t Pwd) {
 	bool PwdMode = arg0 & 0x1;
 	uint8_t Page = (arg0 & 0x2) >> 1;
 	uint32_t i = 0;
-	bool RegReadMode = (Block == 0xFF);
+	bool RegReadMode = (Block == 0xFF);//regular read mode
 
 	//clear buffer now so it does not interfere with timing later
 	BigBuf_Clear_ext(false);
@@ -1172,10 +1343,12 @@ void T55xxReadBlock(uint16_t arg0, uint8_t Block, uint32_t Pwd) {
 
 	// Set up FPGA, 125kHz to power up the tag
 	LFSetupFPGAForADC(95, true);
-
+	StartTicks();
+	// make sure tag is fully powered up...
+	WaitMS(5);
 	// Trigger T55x7 Direct Access Mode with start gap
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-	SpinDelayUs(START_GAP);
+	WaitUS(START_GAP);
 
 	// Opcode 1[page]
 	T55xxWriteBit(1);
@@ -1195,10 +1368,13 @@ void T55xxReadBlock(uint16_t arg0, uint8_t Block, uint32_t Pwd) {
 			T55xxWriteBit(Block & i);		
 
 	// Turn field on to read the response
-	TurnReadLFOn(READ_GAP);
+	// 137*8 seems to get to the start of data pretty well... 
+	//  but we want to go past the start and let the repeating data settle in...
+	TurnReadLFOn(210*8); 
 
 	// Acquisition
-	doT55x7Acquisition(12000);
+	// Now do the acquisition
+	DoPartialAcquisition(0, true, 12000, 0);
 
 	// Turn the field off
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
@@ -1212,10 +1388,13 @@ void T55xxWakeUp(uint32_t Pwd){
 	
 	// Set up FPGA, 125kHz
 	LFSetupFPGAForADC(95, true);
+	StartTicks();
+	// make sure tag is fully powered up...
+	WaitMS(5);
 	
 	// Trigger T55x7 Direct Access Mode
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-	SpinDelayUs(START_GAP);
+	WaitUS(START_GAP);
 	
 	// Opcode 10
 	T55xxWriteBit(1);
@@ -1238,8 +1417,8 @@ void WriteT55xx(uint32_t *blockdata, uint8_t startblock, uint8_t numblocks) {
 	}
 }
 
-// Copy HID id to card and setup block 0 config
-void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT) {
+// Copy a HID-like card (e.g. HID Proximity, Paradox) to a T55x7 compatible card
+void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT, uint8_t preamble) {
 	uint32_t data[] = {0,0,0,0,0,0,0};
 	uint8_t last_block = 0;
 
@@ -1251,15 +1430,15 @@ void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT) {
 		}
 		// Build the 6 data blocks for supplied 84bit ID
 		last_block = 6;
-		// load preamble (1D) & long format identifier (9E manchester encoded)
-		data[1] = 0x1D96A900 | (manchesterEncode2Bytes((hi2 >> 16) & 0xF) & 0xFF);
+		// load preamble & long format identifier (9E manchester encoded)
+		data[1] = (preamble << 24) | 0x96A900 | (manchesterEncode2Bytes((hi2 >> 16) & 0xF) & 0xFF);
 		// load raw id from hi2, hi, lo to data blocks (manchester encoded)
 		data[2] = manchesterEncode2Bytes(hi2 & 0xFFFF);
 		data[3] = manchesterEncode2Bytes(hi >> 16);
 		data[4] = manchesterEncode2Bytes(hi & 0xFFFF);
 		data[5] = manchesterEncode2Bytes(lo >> 16);
 		data[6] = manchesterEncode2Bytes(lo & 0xFFFF);
-	}	else {
+	} else {
 		// Ensure no more than 44 bits supplied
 		if (hi>0xFFF) {
 			DbpString("Tags can only have 44 bits.");
@@ -1268,7 +1447,7 @@ void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT) {
 		// Build the 3 data blocks for supplied 44bit ID
 		last_block = 3;
 		// load preamble
-		data[1] = 0x1D000000 | (manchesterEncode2Bytes(hi) & 0xFFFFFF);
+		data[1] = (preamble << 24) | (manchesterEncode2Bytes(hi) & 0xFFFFFF);
 		data[2] = manchesterEncode2Bytes(lo >> 16);
 		data[3] = manchesterEncode2Bytes(lo & 0xFFFF);
 	}
@@ -1321,10 +1500,10 @@ void CopyIndala224toT55x7(uint32_t uid1, uint32_t uid2, uint32_t uid3, uint32_t
 	//Program the 7 data blocks for supplied 224bit UID
 	uint32_t data[] = {0, uid1, uid2, uid3, uid4, uid5, uid6, uid7};
 	// and the block 0 for Indala224 format	
-	//Config for Indala (RF/32;PSK1 with RF/2;Maxblock=7)
-	data[0] = T55x7_BITRATE_RF_32 | T55x7_MODULATION_PSK1 | (7 << T55x7_MAXBLOCK_SHIFT);
+	//Config for Indala (RF/32;PSK2 with RF/2;Maxblock=7)
+	data[0] = T55x7_BITRATE_RF_32 | T55x7_MODULATION_PSK2 | (7 << T55x7_MAXBLOCK_SHIFT);
 	//TODO add selection of chip for Q5 or T55x7
-	// data[0] = (((32-2)/2)<<T5555_BITRATE_SHIFT) | T5555_MODULATION_PSK1 | 7 << T5555_MAXBLOCK_SHIFT;
+	// data[0] = (((32-2)>>1)<<T5555_BITRATE_SHIFT) | T5555_MODULATION_PSK2 | 7 << T5555_MAXBLOCK_SHIFT;
 	WriteT55xx(data, 0, 8);
 	//Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=7;Inverse data)
 	//	T5567WriteBlock(0x603E10E2,0);
@@ -1333,7 +1512,7 @@ void CopyIndala224toT55x7(uint32_t uid1, uint32_t uid2, uint32_t uid3, uint32_t
 // clone viking tag to T55xx
 void CopyVikingtoT55xx(uint32_t block1, uint32_t block2, uint8_t Q5) {
 	uint32_t data[] = {T55x7_BITRATE_RF_32 | T55x7_MODULATION_MANCHESTER | (2 << T55x7_MAXBLOCK_SHIFT), block1, block2};
-	if (Q5) data[0] = (32 << T5555_BITRATE_SHIFT) | T5555_MODULATION_MANCHESTER | 2 << T5555_MAXBLOCK_SHIFT;
+	if (Q5) data[0] = T5555_SET_BITRATE(32) | T5555_MODULATION_MANCHESTER | 2 << T5555_MAXBLOCK_SHIFT;
 	// Program the data blocks for supplied ID and the block 0 config
 	WriteT55xx(data, 0, 3);
 	LED_D_OFF();
@@ -1404,7 +1583,7 @@ void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo) {
 	LED_D_ON();
 
 	// Write EM410x ID
-	uint32_t data[] = {0, id>>32, id & 0xFFFFFFFF};
+	uint32_t data[] = {0, (uint32_t)(id>>32), (uint32_t)(id & 0xFFFFFFFF)};
 
 	clock = (card & 0xFF00) >> 8;
 	clock = (clock == 0) ? 64 : clock;
@@ -1417,8 +1596,7 @@ void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo) {
 		}
 		data[0] = clock | T55x7_MODULATION_MANCHESTER | (2 << T55x7_MAXBLOCK_SHIFT);
 	} else { //t5555 (Q5)
-		clock = (clock-2)>>1;  //n = (RF-2)/2
-		data[0] = (clock << T5555_BITRATE_SHIFT) | T5555_MODULATION_MANCHESTER | (2 << T5555_MAXBLOCK_SHIFT);
+		data[0] = T5555_SET_BITRATE(clock) | T5555_MODULATION_MANCHESTER | (2 << T5555_MAXBLOCK_SHIFT);
 	}
 
 	WriteT55xx(data, 0, 3);
@@ -1537,29 +1715,27 @@ void SendForward(uint8_t fwd_bit_count) {
 	fwd_write_ptr = forwardLink_data;
 	fwd_bit_sz = fwd_bit_count;
 
-	LED_D_ON();
-
-	// Set up FPGA, 125kHz
+	// Set up FPGA, 125kHz or 95 divisor
 	LFSetupFPGAForADC(95, true);
 
 	// force 1st mod pulse (start gap must be longer for 4305)
 	fwd_bit_sz--; //prepare next bit modulation
 	fwd_write_ptr++;
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
-	SpinDelayUs(55*8); //55 cycles off (8us each)for 4305
+	WaitUS(55*8); //55 cycles off (8us each)for 4305  //another reader has 37 here...
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
-	SpinDelayUs(16*8); //16 cycles on (8us each)
+	WaitUS(18*8); //18 cycles on (8us each)
 
 	// now start writting
 	while(fwd_bit_sz-- > 0) { //prepare next bit modulation
 		if(((*fwd_write_ptr++) & 1) == 1)
-			SpinDelayUs(32*8); //32 cycles at 125Khz (8us each)
+			WaitUS(32*8); //32 cycles at 125Khz (8us each)
 		else {
 			//These timings work for 4469/4269/4305 (with the 55*8 above)
 			FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
-			SpinDelayUs(23*8); //16-4 cycles off (8us each)
+			WaitUS(23*8); //23 cycles off (8us each)
 			FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
-			SpinDelayUs(9*8); //16 cycles on (8us each)
+			WaitUS(18*8); //18 cycles on (8us each)
 		}
 	}
 }
@@ -1581,13 +1757,12 @@ void EM4xLogin(uint32_t Password) {
 void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
 
 	uint8_t fwd_bit_count;
-	uint8_t *dest = BigBuf_get_addr();
-	uint16_t bufferlength = BigBuf_max_traceLen();
-	uint32_t i = 0;
 
 	// Clear destination buffer before sending the command
 	BigBuf_Clear_ext(false);
 
+	LED_A_ON();
+	StartTicks();
 	//If password mode do login
 	if (PwdMode == 1) EM4xLogin(Pwd);
 
@@ -1595,36 +1770,29 @@ void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
 	fwd_bit_count = Prepare_Cmd( FWD_CMD_READ );
 	fwd_bit_count += Prepare_Addr( Address );
 
-	// Connect the A/D to the peak-detected low-frequency path.
-	SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
-	// Now set up the SSC to get the ADC samples that are now streaming at us.
-	FpgaSetupSsc();
-
 	SendForward(fwd_bit_count);
-
+	WaitUS(400);
 	// Now do the acquisition
-	i = 0;
-	for(;;) {
-		if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
-			AT91C_BASE_SSC->SSC_THR = 0x43;
-		}
-		if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
-			dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
-			i++;
-			if (i >= bufferlength) break;
-		}
-	}
+	DoPartialAcquisition(20, true, 6000, 1000);
+	
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+	LED_A_OFF();
 	cmd_send(CMD_ACK,0,0,0,0,0);
-	LED_D_OFF();
 }
 
-void EM4xWriteWord(uint32_t Data, uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
-
+void EM4xWriteWord(uint32_t flag, uint32_t Data, uint32_t Pwd) {
+	
+	bool PwdMode = (flag & 0xF);
+	uint8_t Address = (flag >> 8) & 0xFF;
 	uint8_t fwd_bit_count;
 
+	//clear buffer now so it does not interfere with timing later
+	BigBuf_Clear_ext(false);
+
+	LED_A_ON();
+	StartTicks();
 	//If password mode do login
-	if (PwdMode == 1) EM4xLogin(Pwd);
+	if (PwdMode) EM4xLogin(Pwd);
 
 	forward_ptr = forwardLink_data;
 	fwd_bit_count = Prepare_Cmd( FWD_CMD_WRITE );
@@ -1634,7 +1802,72 @@ void EM4xWriteWord(uint32_t Data, uint8_t Address, uint32_t Pwd, uint8_t PwdMode
 	SendForward(fwd_bit_count);
 
 	//Wait for write to complete
-	SpinDelay(20);
+	//SpinDelay(10);
+
+	WaitUS(6500);
+	//Capture response if one exists
+	DoPartialAcquisition(20, true, 6000, 1000);
+
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
-	LED_D_OFF();
+	LED_A_OFF();
+	cmd_send(CMD_ACK,0,0,0,0,0);
+}
+/*
+Reading a COTAG.
+
+COTAG needs the reader to send a startsequence and the card has an extreme slow datarate.
+because of this, we can "sample" the data signal but we interpreate it to Manchester direct.
+
+READER START SEQUENCE:
+burst 800 us,    gap   2.2 msecs
+burst 3.6 msecs  gap   2.2 msecs
+burst 800 us     gap   2.2 msecs
+pulse 3.6 msecs
+
+This triggers a COTAG tag to response
+*/
+void Cotag(uint32_t arg0) {
+
+#define OFF     { FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); WaitUS(2035); }
+#define ON(x)   { FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); WaitUS((x)); }
+
+	uint8_t rawsignal = arg0 & 0xF;
+
+	LED_A_ON();
+
+	// Switching to LF image on FPGA. This might empty BigBuff
+	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+
+	//clear buffer now so it does not interfere with timing later
+	BigBuf_Clear_ext(false);
+
+	// Set up FPGA, 132kHz to power up the tag
+	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 89);
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+
+	// Connect the A/D to the peak-detected low-frequency path.
+	SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
+
+	// Now set up the SSC to get the ADC samples that are now streaming at us.
+	FpgaSetupSsc(FPGA_MAJOR_MODE_LF_ADC);
+
+	// start clock - 1.5ticks is 1us
+	StartTicks();
+
+	//send COTAG start pulse
+	ON(740)  OFF
+	ON(3330) OFF
+	ON(740)  OFF
+	ON(1000)
+
+	switch(rawsignal) {
+		case 0: doCotagAcquisition(50000); break;
+		case 1: doCotagAcquisitionManchester(); break;
+		case 2: DoAcquisition_config(true, 0); break;
+	}
+
+	// Turn the field off
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+	cmd_send(CMD_ACK,0,0,0,0,0);
+	LED_A_OFF();
 }