X-Git-Url: http://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/54a942b05dd2a601b85e9851a5799929cbdffd5f..4c6f2d48fbe8d57c6fbd80b7e4b38acaf6355e47:/armsrc/lfops.c diff --git a/armsrc/lfops.c b/armsrc/lfops.c index 8d4e2dc9..7d497e3c 100644 --- a/armsrc/lfops.c +++ b/armsrc/lfops.c @@ -15,30 +15,14 @@ #include "crc16.h" #include "string.h" -void AcquireRawAdcSamples125k(int at134khz) -{ - if (at134khz) - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz - else - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz - - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); - - // Connect the A/D to the peak-detected low-frequency path. - SetAdcMuxFor(GPIO_MUXSEL_LOPKD); - - // Give it a bit of time for the resonant antenna to settle. - SpinDelay(50); - - // Now set up the SSC to get the ADC samples that are now streaming at us. - FpgaSetupSsc(); - - // Now call the acquisition routine - DoAcquisition125k(); -} -// split into two routines so we can avoid timing issues after sending commands // -void DoAcquisition125k(void) +/** +* Does the sample acquisition. If threshold is specified, the actual sampling +* is not commenced until the threshold has been reached. +* @param trigger_threshold - the threshold +* @param silent - is true, now outputs are made. If false, dbprints the status +*/ +void DoAcquisition125k_internal(int trigger_threshold,bool silent) { uint8_t *dest = (uint8_t *)BigBuf; int n = sizeof(BigBuf); @@ -53,38 +37,95 @@ void DoAcquisition125k(void) } if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) { dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR; - i++; LED_D_OFF(); - if (i >= n) break; + if (trigger_threshold != -1 && dest[i] < trigger_threshold) + continue; + else + trigger_threshold = -1; + if (++i >= n) break; } } - Dbprintf("buffer samples: %02x %02x %02x %02x %02x %02x %02x %02x ...", - dest[0], dest[1], dest[2], dest[3], dest[4], dest[5], dest[6], dest[7]); + if(!silent) + { + Dbprintf("buffer samples: %02x %02x %02x %02x %02x %02x %02x %02x ...", + dest[0], dest[1], dest[2], dest[3], dest[4], dest[5], dest[6], dest[7]); + + } +} +/** +* Perform sample aquisition. +*/ +void DoAcquisition125k(int trigger_threshold) +{ + DoAcquisition125k_internal(trigger_threshold, false); +} + +/** +* Setup the FPGA to listen for samples. This method downloads the FPGA bitstream +* if not already loaded, sets divisor and starts up the antenna. +* @param divisor : 1, 88> 255 or negative ==> 134.8 KHz +* 0 or 95 ==> 125 KHz +* +**/ +void LFSetupFPGAForADC(int divisor, bool lf_field) +{ + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); + if ( (divisor == 1) || (divisor < 0) || (divisor > 255) ) + FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz + else if (divisor == 0) + FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz + else + FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor); + + FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | (lf_field ? FPGA_LF_ADC_READER_FIELD : 0)); + + // Connect the A/D to the peak-detected low-frequency path. + SetAdcMuxFor(GPIO_MUXSEL_LOPKD); + // Give it a bit of time for the resonant antenna to settle. + SpinDelay(50); + // Now set up the SSC to get the ADC samples that are now streaming at us. + FpgaSetupSsc(); +} +/** +* Initializes the FPGA, and acquires the samples. +**/ +void AcquireRawAdcSamples125k(int divisor) +{ + LFSetupFPGAForADC(divisor, true); + // Now call the acquisition routine + DoAcquisition125k_internal(-1,false); +} +/** +* Initializes the FPGA for snoop-mode, and acquires the samples. +**/ + +void SnoopLFRawAdcSamples(int divisor, int trigger_threshold) +{ + LFSetupFPGAForADC(divisor, false); + DoAcquisition125k(trigger_threshold); } void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1, uint8_t *command) { - int at134khz; /* Make sure the tag is reset */ + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); SpinDelay(2500); + + int divisor_used = 95; // 125 KHz // see if 'h' was specified - if (command[strlen((char *) command) - 1] == 'h') - at134khz = TRUE; - else - at134khz = FALSE; - if (at134khz) - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz - else - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz + if (command[strlen((char *) command) - 1] == 'h') + divisor_used = 88; // 134.8 KHz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); + FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used); + FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); // Give it a bit of time for the resonant antenna to settle. SpinDelay(50); + // And a little more time for the tag to fully power up SpinDelay(2000); @@ -96,12 +137,9 @@ void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1, FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); LED_D_OFF(); SpinDelayUs(delay_off); - if (at134khz) - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz - else - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz + FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used); - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); + FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); LED_D_ON(); if(*(command++) == '0') SpinDelayUs(period_0); @@ -111,15 +149,12 @@ void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1, FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); LED_D_OFF(); SpinDelayUs(delay_off); - if (at134khz) - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz - else - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz + FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used); - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); + FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); // now do the read - DoAcquisition125k(); + DoAcquisition125k(-1); } /* blank r/w tag data stream @@ -156,6 +191,7 @@ void ReadTItag(void) uint32_t threshold = (sampleslo - sampleshi + 1)>>1; // TI tags charge at 134.2Khz + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz // Place FPGA in passthrough mode, in this mode the CROSS_LO line @@ -363,6 +399,7 @@ void AcquireTiType(void) // if not provided a valid crc will be computed from the data and written. void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc) { + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); if(crc == 0) { crc = update_crc16(crc, (idlo)&0xff); crc = update_crc16(crc, (idlo>>8)&0xff); @@ -434,6 +471,7 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol) int i; uint8_t *tab = (uint8_t *)BigBuf; + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT); AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT | GPIO_SSC_CLK; @@ -592,217 +630,243 @@ void CmdHIDsimTAG(int hi, int lo, int ledcontrol) LED_A_OFF(); } - -// loop to capture raw HID waveform then FSK demodulate the TAG ID from it -void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol) +size_t fsk_demod(uint8_t * dest, size_t size) { - uint8_t *dest = (uint8_t *)BigBuf; - int m=0, n=0, i=0, idx=0, found=0, lastval=0; - uint32_t hi2=0, hi=0, lo=0; + uint32_t last_transition = 0; + uint32_t idx = 1; - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); + // we don't care about actual value, only if it's more or less than a + // threshold essentially we capture zero crossings for later analysis + uint8_t threshold_value = 127; - // Connect the A/D to the peak-detected low-frequency path. - SetAdcMuxFor(GPIO_MUXSEL_LOPKD); + // sync to first lo-hi transition, and threshold - // Give it a bit of time for the resonant antenna to settle. - SpinDelay(50); + //Need to threshold first sample + if(dest[0] < threshold_value) dest[0] = 0; + else dest[0] = 1; - // Now set up the SSC to get the ADC samples that are now streaming at us. - FpgaSetupSsc(); + size_t numBits = 0; + // count cycles between consecutive lo-hi transitions, there should be either 8 (fc/8) + // or 10 (fc/10) cycles but in practice due to noise etc we may end up with with anywhere + // between 7 to 11 cycles so fuzz it by treat anything <9 as 8 and anything else as 10 + for(idx = 1; idx < size; idx++) { + // threshold current value + if (dest[idx] < threshold_value) dest[idx] = 0; + else dest[idx] = 1; - for(;;) { - WDT_HIT(); - if (ledcontrol) - LED_A_ON(); - if(BUTTON_PRESS()) { - DbpString("Stopped"); - if (ledcontrol) - LED_A_OFF(); - return; - } + // Check for 0->1 transition + if (dest[idx-1] < dest[idx]) { // 0 -> 1 transition - i = 0; - m = sizeof(BigBuf); - memset(dest,128,m); - for(;;) { - if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { - AT91C_BASE_SSC->SSC_THR = 0x43; - if (ledcontrol) - LED_D_ON(); - } - if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) { - dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR; - // we don't care about actual value, only if it's more or less than a - // threshold essentially we capture zero crossings for later analysis - if(dest[i] < 127) dest[i] = 0; else dest[i] = 1; - i++; - if (ledcontrol) - LED_D_OFF(); - if(i >= m) { - break; - } + if (idx-last_transition < 9) { + dest[numBits]=1; + } else { + dest[numBits]=0; } + last_transition = idx; + numBits++; } + } + return numBits; //Actually, it returns the number of bytes, but each byte represents a bit: 1 or 0 +} - // FSK demodulator - // sync to first lo-hi transition - for( idx=1; idx0 crossing + if ( dest[idx-1] ) { + n=(n+1) / h2l_crossing_value; + } else {// 0->1 crossing + n=(n+1) / l2h_crossing_value; + } + if (n == 0) n = 1; + + if(n < maxConsequtiveBits) + { + memset(dest+numBits, dest[idx-1] , n); + numBits += n; } - m=i; + n=0; + lastval=dest[idx]; + }//end for + + return numBits; + +} +// loop to capture raw HID waveform then FSK demodulate the TAG ID from it +void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol) +{ + uint8_t *dest = (uint8_t *)BigBuf; + + size_t size=0,idx=0; //, found=0; + uint32_t hi2=0, hi=0, lo=0; + + // Configure to go in 125Khz listen mode + LFSetupFPGAForADC(95, true); + + while(!BUTTON_PRESS()) { + WDT_HIT(); + if (ledcontrol) LED_A_ON(); + + DoAcquisition125k_internal(-1,true); + size = sizeof(BigBuf); + + // FSK demodulator + size = fsk_demod(dest, size); // we now have a set of cycle counts, loop over previous results and aggregate data into bit patterns - lastval=dest[0]; - idx=0; - i=0; - n=0; - for( idx=0; idx0 : fc/8 in sets of 6 + // 0->1 : fc/10 in sets of 5 + size = aggregate_bits(dest,size, 6,5,5); + WDT_HIT(); // final loop, go over previously decoded manchester data and decode into usable tag ID // 111000 bit pattern represent start of frame, 01 pattern represents a 1 and 10 represents a 0 - for( idx=0; idx>1) & 0xFFFF); - } - else { - Dbprintf("TAG ID: %x%08x (%d)", - (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF); - } - /* if we're only looking for one tag */ - if (findone) - { - *high = hi; - *low = lo; - return; - } - hi2=0; - hi=0; - lo=0; - found=0; - } - } - if (found) { - if (dest[idx] && (!dest[idx+1]) ) { - hi2=(hi2<<1)|(hi>>31); - hi=(hi<<1)|(lo>>31); - lo=(lo<<1)|0; - } else if ( (!dest[idx]) && dest[idx+1]) { - hi2=(hi2<<1)|(hi>>31); - hi=(hi<<1)|(lo>>31); - lo=(lo<<1)|1; - } else { - found=0; - hi2=0; - hi=0; - lo=0; + if ( memcmp(dest+idx, frame_marker_mask, sizeof(frame_marker_mask)) == 0) + { // frame marker found + idx+=sizeof(frame_marker_mask); + + while(dest[idx] != dest[idx+1] && idx < size-2) + { + // Keep going until next frame marker (or error) + // Shift in a bit. Start by shifting high registers + hi2 = (hi2<<1)|(hi>>31); + hi = (hi<<1)|(lo>>31); + //Then, shift in a 0 or one into low + if (dest[idx] && !dest[idx+1]) // 1 0 + lo=(lo<<1)|0; + else // 0 1 + lo=(lo<<1)| + 1; + numshifts ++; + idx += 2; } - idx++; - } - if ( dest[idx] && dest[idx+1] && dest[idx+2] && (!dest[idx+3]) && (!dest[idx+4]) && (!dest[idx+5]) ) - { - found=1; - idx+=6; - if (found && (hi|lo)) { - if (hi2 != 0){ - Dbprintf("TAG ID: %x%08x%08x (%d)", - (unsigned int) hi2, (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF); - } - else { - Dbprintf("TAG ID: %x%08x (%d)", - (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF); - } - /* if we're only looking for one tag */ - if (findone) + //Dbprintf("Num shifts: %d ", numshifts); + // Hopefully, we read a tag and hit upon the next frame marker + if(idx + sizeof(frame_marker_mask) < size) + { + if ( memcmp(dest+idx, frame_marker_mask, sizeof(frame_marker_mask)) == 0) { - *high = hi; - *low = lo; - return; + if (hi2 != 0){ + Dbprintf("TAG ID: %x%08x%08x (%d)", + (unsigned int) hi2, (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF); + } + else { + Dbprintf("TAG ID: %x%08x (%d)", + (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF); + } } - hi2=0; - hi=0; - lo=0; - found=0; + } + + // reset + hi2 = hi = lo = 0; + numshifts = 0; + }else + { + idx++; } } WDT_HIT(); + + } + DbpString("Stopped"); + if (ledcontrol) LED_A_OFF(); +} + +uint32_t bytebits_to_byte(uint8_t* src, int numbits) +{ + uint32_t num = 0; + for(int i = 0 ; i < numbits ; i++) + { + num = (num << 1) | (*src); + src++; + } + return num; +} + + +void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) +{ + uint8_t *dest = (uint8_t *)BigBuf; + + size_t size=0, idx=0; + uint32_t code=0, code2=0; + + // Configure to go in 125Khz listen mode + LFSetupFPGAForADC(95, true); + + while(!BUTTON_PRESS()) { + + + WDT_HIT(); + if (ledcontrol) LED_A_ON(); + + DoAcquisition125k_internal(-1,true); + size = sizeof(BigBuf); + + // FSK demodulator + size = fsk_demod(dest, size); + + // we now have a set of cycle counts, loop over previous results and aggregate data into bit patterns + // 1->0 : fc/8 in sets of 7 + // 0->1 : fc/10 in sets of 6 + size = aggregate_bits(dest, size, 7,6,13); + + WDT_HIT(); + + //Handle the data + uint8_t mask[] = {0,0,0,0,0,0,0,0,0,1}; + for( idx=0; idx < size - 64; idx++) { + + if ( memcmp(dest + idx, mask, sizeof(mask)) ) continue; + + Dbprintf("%d%d%d%d%d%d%d%d",dest[idx], dest[idx+1], dest[idx+2],dest[idx+3],dest[idx+4],dest[idx+5],dest[idx+6],dest[idx+7]); + Dbprintf("%d%d%d%d%d%d%d%d",dest[idx+8], dest[idx+9], dest[idx+10],dest[idx+11],dest[idx+12],dest[idx+13],dest[idx+14],dest[idx+15]); + Dbprintf("%d%d%d%d%d%d%d%d",dest[idx+16],dest[idx+17],dest[idx+18],dest[idx+19],dest[idx+20],dest[idx+21],dest[idx+22],dest[idx+23]); + Dbprintf("%d%d%d%d%d%d%d%d",dest[idx+24],dest[idx+25],dest[idx+26],dest[idx+27],dest[idx+28],dest[idx+29],dest[idx+30],dest[idx+31]); + Dbprintf("%d%d%d%d%d%d%d%d",dest[idx+32],dest[idx+33],dest[idx+34],dest[idx+35],dest[idx+36],dest[idx+37],dest[idx+38],dest[idx+39]); + Dbprintf("%d%d%d%d%d%d%d%d",dest[idx+40],dest[idx+41],dest[idx+42],dest[idx+43],dest[idx+44],dest[idx+45],dest[idx+46],dest[idx+47]); + Dbprintf("%d%d%d%d%d%d%d%d",dest[idx+48],dest[idx+49],dest[idx+50],dest[idx+51],dest[idx+52],dest[idx+53],dest[idx+54],dest[idx+55]); + Dbprintf("%d%d%d%d%d%d%d%d",dest[idx+56],dest[idx+57],dest[idx+58],dest[idx+59],dest[idx+60],dest[idx+61],dest[idx+62],dest[idx+63]); + + code = bytebits_to_byte(dest+idx,32); + code2 = bytebits_to_byte(dest+idx+32,32); + + short version = bytebits_to_byte(dest+idx+14,4); + char unknown = bytebits_to_byte(dest+idx+19,8) ; + uint16_t number = bytebits_to_byte(dest+idx+36,9); + + Dbprintf("XSF(%02d)%02x:%d (%08x%08x)",version,unknown,number,code,code2); + if (ledcontrol) LED_D_OFF(); + + // if we're only looking for one tag + if (findone){ + LED_A_OFF(); + return; + } + } + WDT_HIT(); } + DbpString("Stopped"); + if (ledcontrol) LED_A_OFF(); } /*------------------------------ @@ -872,8 +936,9 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol) // Write one bit to card void T55xxWriteBit(int bit) { + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); + FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); if (bit == 0) SpinDelayUs(WRITE_0); else @@ -887,8 +952,9 @@ void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t PwdMod { unsigned int i; + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); + FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); // Give it a bit of time for the resonant antenna to settle. // And for the tag to fully power up @@ -920,7 +986,7 @@ void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t PwdMod // Now perform write (nominal is 5.6 ms for T55x7 and 18ms for E5550, // so wait a little more) FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); + FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); SpinDelay(20); FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); } @@ -931,6 +997,7 @@ void T55xxReadBlock(uint32_t Block, uint32_t Pwd, uint8_t PwdMode) uint8_t *dest = (uint8_t *)BigBuf; int m=0, i=0; + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); m = sizeof(BigBuf); // Clear destination buffer before sending the command memset(dest, 128, m); @@ -941,7 +1008,7 @@ void T55xxReadBlock(uint32_t Block, uint32_t Pwd, uint8_t PwdMode) LED_D_ON(); FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); + FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); // Give it a bit of time for the resonant antenna to settle. // And for the tag to fully power up @@ -967,7 +1034,7 @@ void T55xxReadBlock(uint32_t Block, uint32_t Pwd, uint8_t PwdMode) // Turn field on to read the response FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); + FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); // Now do the acquisition i = 0; @@ -995,6 +1062,7 @@ void T55xxReadTrace(void){ uint8_t *dest = (uint8_t *)BigBuf; int m=0, i=0; + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); m = sizeof(BigBuf); // Clear destination buffer before sending the command memset(dest, 128, m); @@ -1005,7 +1073,7 @@ void T55xxReadTrace(void){ LED_D_ON(); FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); + FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); // Give it a bit of time for the resonant antenna to settle. // And for the tag to fully power up @@ -1021,7 +1089,7 @@ void T55xxReadTrace(void){ // Turn field on to read the response FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); + FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); // Now do the acquisition i = 0; @@ -1164,6 +1232,26 @@ void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT) DbpString("DONE!"); } +void CopyIOtoT55x7(uint32_t hi, uint32_t lo, uint8_t longFMT) +{ + int data1=0, data2=0; //up to six blocks for long format + + data1 = hi; // load preamble + data2 = lo; + + LED_D_ON(); + // Program the data blocks for supplied ID + // and the block 0 for HID format + T55xxWriteBlock(data1,1,0,0); + T55xxWriteBlock(data2,2,0,0); + + //Config Block + T55xxWriteBlock(0x00147040,0,0,0); + LED_D_OFF(); + + DbpString("DONE!"); +} + // Define 9bit header for EM410x tags #define EM410X_HEADER 0x1FF #define EM410X_ID_LENGTH 40 @@ -1175,6 +1263,7 @@ void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo) uint64_t rev_id = 0; // reversed ID int c_parity[4]; // column parity int r_parity = 0; // row parity + uint32_t clock = 0; // Reverse ID bits given as parameter (for simpler operations) for (i = 0; i < EM410X_ID_LENGTH; ++i) { @@ -1232,12 +1321,35 @@ void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo) T55xxWriteBlock((uint32_t)id, 2, 0, 0); // Config for EM410x (RF/64, Manchester, Maxblock=2) - if (card) + if (card) { + // Clock rate is stored in bits 8-15 of the card value + clock = (card & 0xFF00) >> 8; + Dbprintf("Clock rate: %d", clock); + switch (clock) + { + case 32: + clock = T55x7_BITRATE_RF_32; + break; + case 16: + clock = T55x7_BITRATE_RF_16; + break; + case 0: + // A value of 0 is assumed to be 64 for backwards-compatibility + // Fall through... + case 64: + clock = T55x7_BITRATE_RF_64; + break; + default: + Dbprintf("Invalid clock rate: %d", clock); + return; + } + // Writing configuration for T55x7 tag - T55xxWriteBlock(T55x7_BITRATE_RF_64 | + T55xxWriteBlock(clock | T55x7_MODULATION_MANCHESTER | 2 << T55x7_MAXBLOCK_SHIFT, 0, 0, 0); + } else // Writing configuration for T5555(Q5) tag T55xxWriteBlock(0x1F << T5555_BITRATE_SHIFT | @@ -1344,78 +1456,81 @@ int DemodPCF7931(uint8_t **outBlocks) { for (bitidx = 0; i < GraphTraceLen; i++) { - if ( (GraphBuffer[i-1] > GraphBuffer[i] && dir == 1 && GraphBuffer[i] > lmax) || (GraphBuffer[i-1] < GraphBuffer[i] && dir == 0 && GraphBuffer[i] < lmin)) - { - lc = i - lastval; - lastval = i; - - // Switch depending on lc length: - // Tolerance is 1/8 of clock rate (arbitrary) - if (abs(lc-clock/4) < tolerance) { - // 16T0 - if((i - pmc) == lc) { /* 16T0 was previous one */ - /* It's a PMC ! */ - i += (128+127+16+32+33+16)-1; - lastval = i; - pmc = 0; - block_done = 1; - } - else { - pmc = i; - } - } else if (abs(lc-clock/2) < tolerance) { - // 32TO - if((i - pmc) == lc) { /* 16T0 was previous one */ - /* It's a PMC ! */ - i += (128+127+16+32+33)-1; - lastval = i; - pmc = 0; - block_done = 1; - } - else if(half_switch == 1) { - BitStream[bitidx++] = 0; - half_switch = 0; - } - else - half_switch++; - } else if (abs(lc-clock) < tolerance) { - // 64TO - BitStream[bitidx++] = 1; - } else { - // Error - warnings++; - if (warnings > 10) - { - Dbprintf("Error: too many detection errors, aborting."); - return 0; - } - } - - if(block_done == 1) { - if(bitidx == 128) { - for(j=0; j<16; j++) { - Blocks[num_blocks][j] = 128*BitStream[j*8+7]+ - 64*BitStream[j*8+6]+ - 32*BitStream[j*8+5]+ - 16*BitStream[j*8+4]+ - 8*BitStream[j*8+3]+ - 4*BitStream[j*8+2]+ - 2*BitStream[j*8+1]+ - BitStream[j*8]; - } - num_blocks++; - } - bitidx = 0; - block_done = 0; - half_switch = 0; - } - if (GraphBuffer[i-1] > GraphBuffer[i]) dir=0; - else dir = 1; - } - if(bitidx==255) - bitidx=0; - warnings = 0; - if(num_blocks == 4) break; + if ( (GraphBuffer[i-1] > GraphBuffer[i] && dir == 1 && GraphBuffer[i] > lmax) || (GraphBuffer[i-1] < GraphBuffer[i] && dir == 0 && GraphBuffer[i] < lmin)) + { + lc = i - lastval; + lastval = i; + + // Switch depending on lc length: + // Tolerance is 1/8 of clock rate (arbitrary) + if (abs(lc-clock/4) < tolerance) { + // 16T0 + if((i - pmc) == lc) { /* 16T0 was previous one */ + /* It's a PMC ! */ + i += (128+127+16+32+33+16)-1; + lastval = i; + pmc = 0; + block_done = 1; + } + else { + pmc = i; + } + } else if (abs(lc-clock/2) < tolerance) { + // 32TO + if((i - pmc) == lc) { /* 16T0 was previous one */ + /* It's a PMC ! */ + i += (128+127+16+32+33)-1; + lastval = i; + pmc = 0; + block_done = 1; + } + else if(half_switch == 1) { + BitStream[bitidx++] = 0; + half_switch = 0; + } + else + half_switch++; + } else if (abs(lc-clock) < tolerance) { + // 64TO + BitStream[bitidx++] = 1; + } else { + // Error + warnings++; + if (warnings > 10) + { + Dbprintf("Error: too many detection errors, aborting."); + return 0; + } + } + + if(block_done == 1) { + if(bitidx == 128) { + for(j=0; j<16; j++) { + Blocks[num_blocks][j] = 128*BitStream[j*8+7]+ + 64*BitStream[j*8+6]+ + 32*BitStream[j*8+5]+ + 16*BitStream[j*8+4]+ + 8*BitStream[j*8+3]+ + 4*BitStream[j*8+2]+ + 2*BitStream[j*8+1]+ + BitStream[j*8]; + } + num_blocks++; + } + bitidx = 0; + block_done = 0; + half_switch = 0; + } + if(i < GraphTraceLen) + { + if (GraphBuffer[i-1] > GraphBuffer[i]) dir=0; + else dir = 1; + } + } + if(bitidx==255) + bitidx=0; + warnings = 0; + if(num_blocks == 4) break; } memcpy(outBlocks, Blocks, 16*num_blocks); return num_blocks; @@ -1666,8 +1781,9 @@ void SendForward(uint8_t fwd_bit_count) { LED_D_ON(); //Field on + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); + FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); // Give it a bit of time for the resonant antenna to settle. // And for the tag to fully power up @@ -1679,7 +1795,7 @@ void SendForward(uint8_t fwd_bit_count) { FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off SpinDelayUs(55*8); //55 cycles off (8us each)for 4305 FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);//field on + FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on SpinDelayUs(16*8); //16 cycles on (8us each) // now start writting @@ -1691,7 +1807,7 @@ void SendForward(uint8_t fwd_bit_count) { FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off SpinDelayUs(23*8); //16-4 cycles off (8us each) FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);//field on + FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on SpinDelayUs(9*8); //16 cycles on (8us each) } }