X-Git-Url: http://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/6658905f18a1eebc148836f26c731dea9c1377dc..ec130f9c59334145e513285de9c32ac342b30e1f:/include/usb_cmd.h

diff --git a/include/usb_cmd.h b/include/usb_cmd.h
index 6f3c03d8..dff02a33 100644
--- a/include/usb_cmd.h
+++ b/include/usb_cmd.h
@@ -24,6 +24,7 @@ typedef struct {
 #define CMD_SETUP_WRITE								0x0001
 #define CMD_FINISH_WRITE							0x0003
 #define CMD_HARDWARE_RESET							0x0004
+#define CMD_START_FLASH								0x0005
 #define CMD_ACK										0x00ff
 
 // For general mucking around
@@ -32,6 +33,8 @@ typedef struct {
 #define CMD_DEBUG_PRINT_BYTES						0x0102
 #define CMD_LCD_RESET								0x0103
 #define CMD_LCD										0x0104
+#define CMD_BUFF_CLEAR								0x0105
+#define CMD_READ_MEM								0x0106
 
 // For low-frequency tags
 #define CMD_ACQUIRE_RAW_BITS_TI_TYPE				0x0200
@@ -44,11 +47,15 @@ typedef struct {
 #define CMD_SIMULATE_TAG_125K						0x0207
 #define CMD_HID_DEMOD_FSK							0x0208	// ## New command: demodulate HID tag ID
 #define CMD_HID_SIM_TAG								0x0209	// ## New command: simulate HID tag by ID
+#define CMD_SET_LF_DIVISOR							0x020A
+#define CMD_SWEEP_LF								0x020B
+#define CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K			0x020C
 
 // For the 13.56 MHz tags
 #define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693		0x0300
 #define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443		0x0301
-#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443_SIM	0x0302
+#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443_SIM	0x0302
+#define CMD_READ_SRI512_TAG							0x0303
 #define CMD_READER_ISO_15693						0x0310	// ## New command to act like a 15693 reader - greg
 #define CMD_SIMTAG_ISO_15693						0x0311	// ## New command to act like a 15693 reader - greg
 
@@ -58,14 +65,15 @@ typedef struct {
 #define CMD_SNOOP_ISO_14443a						0x0383	// ## New snoop command
 #define CMD_SIMULATE_TAG_ISO_14443a					0x0384	// ## New command: Simulate tag 14443a
 #define CMD_READER_ISO_14443a						0x0385	// ## New command to act like a 14443a reader
-
 #define CMD_SIMULATE_MIFARE_CARD					0x0386
 
 // For measurements of the antenna tuning
 #define CMD_MEASURE_ANTENNA_TUNING					0x0400
 #define CMD_MEASURED_ANTENNA_TUNING					0x0401
+#define CMD_LISTEN_READER_FIELD						0x0402
 
 // For direct FPGA control
 #define CMD_FPGA_MAJOR_MODE_OFF						0x0500	// ## FPGA Control
+#define CMD_TEST									0x0501
 
 #endif