X-Git-Url: http://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/700d8687944db0a48535f818b59b6c9859952c61..e0991f6aa7bf7b193080855bb818ce193542c6dc:/common/polarssl/polarssl_config.h diff --git a/common/polarssl/polarssl_config.h b/common/polarssl/polarssl_config.h deleted file mode 100644 index 3d9a2f67..00000000 --- a/common/polarssl/polarssl_config.h +++ /dev/null @@ -1,2179 +0,0 @@ -/** - * \file config.h - * - * \brief Configuration options (set of defines) - * - * Copyright (C) 2006-2014, Brainspark B.V. - * - * This file is part of PolarSSL (http://www.polarssl.org) - * Lead Maintainer: Paul Bakker - * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - * - * This set of compile-time options may be used to enable - * or disable features selectively, and reduce the global - * memory footprint. - */ -#ifndef POLARSSL_CONFIG_H -#define POLARSSL_CONFIG_H - -#if defined(_MSC_VER) && !defined(_CRT_SECURE_NO_DEPRECATE) -#define _CRT_SECURE_NO_DEPRECATE 1 -#endif - -/** - * \name SECTION: System support - * - * This section sets system specific settings. - * \{ - */ - -/** - * \def POLARSSL_HAVE_INT8 - * - * The system uses 8-bit wide native integers. - * - * Uncomment if native integers are 8-bit wide. - */ -//#define POLARSSL_HAVE_INT8 - -/** - * \def POLARSSL_HAVE_INT16 - * - * The system uses 16-bit wide native integers. - * - * Uncomment if native integers are 16-bit wide. - */ -//#define POLARSSL_HAVE_INT16 - -/** - * \def POLARSSL_HAVE_LONGLONG - * - * The compiler supports the 'long long' type. - * (Only used on 32-bit platforms) - */ -#define POLARSSL_HAVE_LONGLONG - -/** - * \def POLARSSL_HAVE_ASM - * - * The compiler has support for asm(). - * - * Requires support for asm() in compiler. - * - * Used in: - * library/timing.c - * library/padlock.c - * include/polarssl/bn_mul.h - * - * Comment to disable the use of assembly code. - */ -//#define POLARSSL_HAVE_ASM - -/** - * \def POLARSSL_HAVE_SSE2 - * - * CPU supports SSE2 instruction set. - * - * Uncomment if the CPU supports SSE2 (IA-32 specific). - */ -//#define POLARSSL_HAVE_SSE2 - -/** - * \def POLARSSL_HAVE_TIME - * - * System has time.h and time() / localtime() / gettimeofday(). - * - * Comment if your system does not support time functions - */ -#define POLARSSL_HAVE_TIME - -/** - * \def POLARSSL_HAVE_IPV6 - * - * System supports the basic socket interface for IPv6 (RFC 3493), - * specifically getaddrinfo(), freeaddrinfo() and struct sockaddr_storage. - * - * Note: on Windows/MingW, XP or higher is required. - * - * Comment if your system does not support the IPv6 socket interface - */ -#define POLARSSL_HAVE_IPV6 - -/** - * \def POLARSSL_PLATFORM_MEMORY - * - * Enable the memory allocation layer. - * - * By default PolarSSL uses the system-provided malloc() and free(). - * This allows different allocators (self-implemented or provided) to be - * provided to the platform abstraction layer. - * - * Enabling POLARSSL_PLATFORM_MEMORY will provide "platform_set_malloc_free()" - * to allow you to set an alternative malloc() and free() function pointer. - * - * Requires: POLARSSL_PLATFORM_C - * - * Enable this layer to allow use of alternative memory allocators. - */ -//#define POLARSSL_PLATFORM_MEMORY - -/** - * \def POLARSSL_PLATFORM_NO_STD_FUNCTIONS - * - * Do not assign standard functions in the platform layer (e.g. malloc() to - * POLARSSL_PLATFORM_STD_MALLOC and printf() to POLARSSL_PLATFORM_STD_PRINTF) - * - * This makes sure there are no linking errors on platforms that do not support - * these functions. You will HAVE to provide alternatives, either at runtime - * via the platform_set_xxx() functions or at compile time by setting - * the POLARSSL_PLATFORM_STD_XXX defines. - * - * Requires: POLARSSL_PLATFORM_C - * - * Uncomment to prevent default assignment of standard functions in the - * platform layer. - */ -//#define POLARSSL_PLATFORM_NO_STD_FUNCTIONS - -/** - * \def POLARSSL_PLATFORM_XXX_ALT - * - * Uncomment a macro to let PolarSSL support the function in the platform - * abstraction layer. - * - * Example: In case you uncomment POLARSSL_PLATFORM_PRINTF_ALT, PolarSSL will - * provide a function "platform_set_printf()" that allows you to set an - * alternative printf function pointer. - * - * All these define require POLARSSL_PLATFORM_C to be defined! - * - * Uncomment a macro to enable alternate implementation of specific base - * platform function - */ -//#define POLARSSL_PLATFORM_PRINTF_ALT -//#define POLARSSL_PLATFORM_FPRINTF_ALT -/* \} name SECTION: System support */ - -/** - * \name SECTION: PolarSSL feature support - * - * This section sets support for features that are or are not needed - * within the modules that are enabled. - * \{ - */ - -/** - * \def POLARSSL_TIMING_ALT - * - * Uncomment to provide your own alternate implementation for hardclock(), - * get_timer(), set_alarm() and m_sleep(). - * - * Only works if you have POLARSSL_TIMING_C enabled. - * - * You will need to provide a header "timing_alt.h" and an implementation at - * compile time. - */ -//#define POLARSSL_TIMING_ALT - -/** - * \def POLARSSL_XXX_ALT - * - * Uncomment a macro to let PolarSSL use your alternate core implementation of - * a symmetric or hash algorithm (e.g. platform specific assembly optimized - * implementations). Keep in mind that the function prototypes should remain - * the same. - * - * Example: In case you uncomment POLARSSL_AES_ALT, PolarSSL will no longer - * provide the "struct aes_context" definition and omit the base function - * declarations and implementations. "aes_alt.h" will be included from - * "aes.h" to include the new function definitions. - * - * Uncomment a macro to enable alternate implementation for core algorithm - * functions - */ -//#define POLARSSL_AES_ALT -//#define POLARSSL_ARC4_ALT -//#define POLARSSL_BLOWFISH_ALT -//#define POLARSSL_CAMELLIA_ALT -//#define POLARSSL_DES_ALT -//#define POLARSSL_XTEA_ALT -//#define POLARSSL_MD2_ALT -//#define POLARSSL_MD4_ALT -//#define POLARSSL_MD5_ALT -//#define POLARSSL_RIPEMD160_ALT -//#define POLARSSL_SHA1_ALT -//#define POLARSSL_SHA256_ALT -//#define POLARSSL_SHA512_ALT - -/** - * \def POLARSSL_AES_ROM_TABLES - * - * Store the AES tables in ROM. - * - * Uncomment this macro to store the AES tables in ROM. - * - */ -//#define POLARSSL_AES_ROM_TABLES - -/** - * \def POLARSSL_CIPHER_MODE_CBC - * - * Enable Cipher Block Chaining mode (CBC) for symmetric ciphers. - */ -#define POLARSSL_CIPHER_MODE_CBC - -/** - * \def POLARSSL_CIPHER_MODE_CFB - * - * Enable Cipher Feedback mode (CFB) for symmetric ciphers. - */ -#define POLARSSL_CIPHER_MODE_CFB - -/** - * \def POLARSSL_CIPHER_MODE_CTR - * - * Enable Counter Block Cipher mode (CTR) for symmetric ciphers. - */ -#define POLARSSL_CIPHER_MODE_CTR - -/** - * \def POLARSSL_CIPHER_NULL_CIPHER - * - * Enable NULL cipher. - * Warning: Only do so when you know what you are doing. This allows for - * encryption or channels without any security! - * - * Requires POLARSSL_ENABLE_WEAK_CIPHERSUITES as well to enable - * the following ciphersuites: - * TLS_ECDH_ECDSA_WITH_NULL_SHA - * TLS_ECDH_RSA_WITH_NULL_SHA - * TLS_ECDHE_ECDSA_WITH_NULL_SHA - * TLS_ECDHE_RSA_WITH_NULL_SHA - * TLS_ECDHE_PSK_WITH_NULL_SHA384 - * TLS_ECDHE_PSK_WITH_NULL_SHA256 - * TLS_ECDHE_PSK_WITH_NULL_SHA - * TLS_DHE_PSK_WITH_NULL_SHA384 - * TLS_DHE_PSK_WITH_NULL_SHA256 - * TLS_DHE_PSK_WITH_NULL_SHA - * TLS_RSA_WITH_NULL_SHA256 - * TLS_RSA_WITH_NULL_SHA - * TLS_RSA_WITH_NULL_MD5 - * TLS_RSA_PSK_WITH_NULL_SHA384 - * TLS_RSA_PSK_WITH_NULL_SHA256 - * TLS_RSA_PSK_WITH_NULL_SHA - * TLS_PSK_WITH_NULL_SHA384 - * TLS_PSK_WITH_NULL_SHA256 - * TLS_PSK_WITH_NULL_SHA - * - * Uncomment this macro to enable the NULL cipher and ciphersuites - */ -//#define POLARSSL_CIPHER_NULL_CIPHER - -/** - * \def POLARSSL_CIPHER_PADDING_XXX - * - * Uncomment or comment macros to add support for specific padding modes - * in the cipher layer with cipher modes that support padding (e.g. CBC) - * - * If you disable all padding modes, only full blocks can be used with CBC. - * - * Enable padding modes in the cipher layer. - */ -#define POLARSSL_CIPHER_PADDING_PKCS7 -#define POLARSSL_CIPHER_PADDING_ONE_AND_ZEROS -#define POLARSSL_CIPHER_PADDING_ZEROS_AND_LEN -#define POLARSSL_CIPHER_PADDING_ZEROS - -/** - * \def POLARSSL_ENABLE_WEAK_CIPHERSUITES - * - * Enable weak ciphersuites in SSL / TLS. - * Warning: Only do so when you know what you are doing. This allows for - * channels with virtually no security at all! - * - * This enables the following ciphersuites: - * TLS_RSA_WITH_DES_CBC_SHA - * TLS_DHE_RSA_WITH_DES_CBC_SHA - * - * Uncomment this macro to enable weak ciphersuites - */ -//#define POLARSSL_ENABLE_WEAK_CIPHERSUITES - -/** - * \def POLARSSL_REMOVE_ARC4_CIPHERSUITES - * - * Remove RC4 ciphersuites by default in SSL / TLS. - * This flag removes the ciphersuites based on RC4 from the default list as - * returned by ssl_list_ciphersuites(). However, it is still possible to - * enable (some of) them with ssl_set_ciphersuites() by including them - * explicitly. - * - * Uncomment this macro to remove RC4 ciphersuites by default. - */ -//#define POLARSSL_REMOVE_ARC4_CIPHERSUITES - -/** - * \def POLARSSL_ECP_XXXX_ENABLED - * - * Enables specific curves within the Elliptic Curve module. - * By default all supported curves are enabled. - * - * Comment macros to disable the curve and functions for it - */ -#define POLARSSL_ECP_DP_SECP192R1_ENABLED -#define POLARSSL_ECP_DP_SECP224R1_ENABLED -#define POLARSSL_ECP_DP_SECP256R1_ENABLED -#define POLARSSL_ECP_DP_SECP384R1_ENABLED -#define POLARSSL_ECP_DP_SECP521R1_ENABLED -#define POLARSSL_ECP_DP_SECP192K1_ENABLED -#define POLARSSL_ECP_DP_SECP224K1_ENABLED -#define POLARSSL_ECP_DP_SECP256K1_ENABLED -#define POLARSSL_ECP_DP_BP256R1_ENABLED -#define POLARSSL_ECP_DP_BP384R1_ENABLED -#define POLARSSL_ECP_DP_BP512R1_ENABLED -//#define POLARSSL_ECP_DP_M221_ENABLED // Not implemented yet! -#define POLARSSL_ECP_DP_M255_ENABLED -//#define POLARSSL_ECP_DP_M383_ENABLED // Not implemented yet! -//#define POLARSSL_ECP_DP_M511_ENABLED // Not implemented yet! - -/** - * \def POLARSSL_ECP_NIST_OPTIM - * - * Enable specific 'modulo p' routines for each NIST prime. - * Depending on the prime and architecture, makes operations 4 to 8 times - * faster on the corresponding curve. - * - * Comment this macro to disable NIST curves optimisation. - */ -#define POLARSSL_ECP_NIST_OPTIM - -/** - * \def POLARSSL_ECDSA_DETERMINISTIC - * - * Enable deterministic ECDSA (RFC 6979). - * Standard ECDSA is "fragile" in the sense that lack of entropy when signing - * may result in a compromise of the long-term signing key. This is avoided by - * the deterministic variant. - * - * Requires: POLARSSL_HMAC_DRBG_C - * - * Comment this macro to disable deterministic ECDSA. - */ -#define POLARSSL_ECDSA_DETERMINISTIC - -/** - * \def POLARSSL_KEY_EXCHANGE_PSK_ENABLED - * - * Enable the PSK based ciphersuite modes in SSL / TLS. - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * TLS_PSK_WITH_AES_256_GCM_SHA384 - * TLS_PSK_WITH_AES_256_CBC_SHA384 - * TLS_PSK_WITH_AES_256_CBC_SHA - * TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384 - * TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384 - * TLS_PSK_WITH_AES_128_GCM_SHA256 - * TLS_PSK_WITH_AES_128_CBC_SHA256 - * TLS_PSK_WITH_AES_128_CBC_SHA - * TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256 - * TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256 - * TLS_PSK_WITH_3DES_EDE_CBC_SHA - * TLS_PSK_WITH_RC4_128_SHA - */ -#define POLARSSL_KEY_EXCHANGE_PSK_ENABLED - -/** - * \def POLARSSL_KEY_EXCHANGE_DHE_PSK_ENABLED - * - * Enable the DHE-PSK based ciphersuite modes in SSL / TLS. - * - * Requires: POLARSSL_DHM_C - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 - * TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 - * TLS_DHE_PSK_WITH_AES_256_CBC_SHA - * TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384 - * TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 - * TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 - * TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 - * TLS_DHE_PSK_WITH_AES_128_CBC_SHA - * TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256 - * TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 - * TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA - * TLS_DHE_PSK_WITH_RC4_128_SHA - */ -#define POLARSSL_KEY_EXCHANGE_DHE_PSK_ENABLED - -/** - * \def POLARSSL_KEY_EXCHANGE_ECDHE_PSK_ENABLED - * - * Enable the ECDHE-PSK based ciphersuite modes in SSL / TLS. - * - * Requires: POLARSSL_ECDH_C - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 - * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA - * TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 - * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 - * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA - * TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 - * TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA - * TLS_ECDHE_PSK_WITH_RC4_128_SHA - */ -#define POLARSSL_KEY_EXCHANGE_ECDHE_PSK_ENABLED - -/** - * \def POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED - * - * Enable the RSA-PSK based ciphersuite modes in SSL / TLS. - * - * Requires: POLARSSL_RSA_C, POLARSSL_PKCS1_V15, - * POLARSSL_X509_CRT_PARSE_C - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 - * TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 - * TLS_RSA_PSK_WITH_AES_256_CBC_SHA - * TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384 - * TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384 - * TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 - * TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 - * TLS_RSA_PSK_WITH_AES_128_CBC_SHA - * TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256 - * TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256 - * TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA - * TLS_RSA_PSK_WITH_RC4_128_SHA - */ -#define POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED - -/** - * \def POLARSSL_KEY_EXCHANGE_RSA_ENABLED - * - * Enable the RSA-only based ciphersuite modes in SSL / TLS. - * - * Requires: POLARSSL_RSA_C, POLARSSL_PKCS1_V15, - * POLARSSL_X509_CRT_PARSE_C - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * TLS_RSA_WITH_AES_256_GCM_SHA384 - * TLS_RSA_WITH_AES_256_CBC_SHA256 - * TLS_RSA_WITH_AES_256_CBC_SHA - * TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384 - * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 - * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA - * TLS_RSA_WITH_AES_128_GCM_SHA256 - * TLS_RSA_WITH_AES_128_CBC_SHA256 - * TLS_RSA_WITH_AES_128_CBC_SHA - * TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256 - * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 - * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA - * TLS_RSA_WITH_3DES_EDE_CBC_SHA - * TLS_RSA_WITH_RC4_128_SHA - * TLS_RSA_WITH_RC4_128_MD5 - */ -#define POLARSSL_KEY_EXCHANGE_RSA_ENABLED - -/** - * \def POLARSSL_KEY_EXCHANGE_DHE_RSA_ENABLED - * - * Enable the DHE-RSA based ciphersuite modes in SSL / TLS. - * - * Requires: POLARSSL_DHM_C, POLARSSL_RSA_C, POLARSSL_PKCS1_V15, - * POLARSSL_X509_CRT_PARSE_C - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 - * TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 - * TLS_DHE_RSA_WITH_AES_256_CBC_SHA - * TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 - * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 - * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA - * TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 - * TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 - * TLS_DHE_RSA_WITH_AES_128_CBC_SHA - * TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 - * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 - * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA - * TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA - */ -#define POLARSSL_KEY_EXCHANGE_DHE_RSA_ENABLED - -/** - * \def POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED - * - * Enable the ECDHE-RSA based ciphersuite modes in SSL / TLS. - * - * Requires: POLARSSL_ECDH_C, POLARSSL_RSA_C, POLARSSL_PKCS1_V15, - * POLARSSL_X509_CRT_PARSE_C - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 - * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 - * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA - * TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 - * TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 - * TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 - * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 - * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA - * TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 - * TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 - * TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA - * TLS_ECDHE_RSA_WITH_RC4_128_SHA - */ -#define POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED - -/** - * \def POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED - * - * Enable the ECDHE-ECDSA based ciphersuite modes in SSL / TLS. - * - * Requires: POLARSSL_ECDH_C, POLARSSL_ECDSA_C, POLARSSL_X509_CRT_PARSE_C, - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 - * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 - * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA - * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 - * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 - * TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 - * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 - * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA - * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 - * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 - * TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA - * TLS_ECDHE_ECDSA_WITH_RC4_128_SHA - */ -#define POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED - -/** - * \def POLARSSL_KEY_EXCHANGE_ECDH_ECDSA_ENABLED - * - * Enable the ECDH-ECDSA based ciphersuite modes in SSL / TLS. - * - * Requires: POLARSSL_ECDH_C, POLARSSL_X509_CRT_PARSE_C - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * TLS_ECDH_ECDSA_WITH_RC4_128_SHA - * TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA - * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA - * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA - * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 - * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 - * TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 - * TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 - * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 - * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 - * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 - * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 - */ -#define POLARSSL_KEY_EXCHANGE_ECDH_ECDSA_ENABLED - -/** - * \def POLARSSL_KEY_EXCHANGE_ECDH_RSA_ENABLED - * - * Enable the ECDH-RSA based ciphersuite modes in SSL / TLS. - * - * Requires: POLARSSL_ECDH_C, POLARSSL_X509_CRT_PARSE_C - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * TLS_ECDH_RSA_WITH_RC4_128_SHA - * TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA - * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA - * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA - * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 - * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 - * TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 - * TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 - * TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256 - * TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384 - * TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256 - * TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384 - */ -#define POLARSSL_KEY_EXCHANGE_ECDH_RSA_ENABLED - -/** - * \def POLARSSL_PK_PARSE_EC_EXTENDED - * - * Enhance support for reading EC keys using variants of SEC1 not allowed by - * RFC 5915 and RFC 5480. - * - * Currently this means parsing the SpecifiedECDomain choice of EC - * parameters (only known groups are supported, not arbitrary domains, to - * avoid validation issues). - * - * Disable if you only need to support RFC 5915 + 5480 key formats. - */ -#define POLARSSL_PK_PARSE_EC_EXTENDED - -/** - * \def POLARSSL_ERROR_STRERROR_BC - * - * Make available the backward compatible error_strerror() next to the - * current polarssl_strerror(). - * - * For new code, it is recommended to use polarssl_strerror() instead and - * disable this. - * - * Disable if you run into name conflicts and want to really remove the - * error_strerror() - */ -#define POLARSSL_ERROR_STRERROR_BC - -/** - * \def POLARSSL_ERROR_STRERROR_DUMMY - * - * Enable a dummy error function to make use of polarssl_strerror() in - * third party libraries easier when POLARSSL_ERROR_C is disabled - * (no effect when POLARSSL_ERROR_C is enabled). - * - * You can safely disable this if POLARSSL_ERROR_C is enabled, or if you're - * not using polarssl_strerror() or error_strerror() in your application. - * - * Disable if you run into name conflicts and want to really remove the - * polarssl_strerror() - */ -#define POLARSSL_ERROR_STRERROR_DUMMY - -/** - * \def POLARSSL_GENPRIME - * - * Enable the prime-number generation code. - * - * Requires: POLARSSL_BIGNUM_C - */ -#define POLARSSL_GENPRIME - -/** - * \def POLARSSL_FS_IO - * - * Enable functions that use the filesystem. - */ -#define POLARSSL_FS_IO - -/** - * \def POLARSSL_NO_DEFAULT_ENTROPY_SOURCES - * - * Do not add default entropy sources. These are the platform specific, - * hardclock and HAVEGE based poll functions. - * - * This is useful to have more control over the added entropy sources in an - * application. - * - * Uncomment this macro to prevent loading of default entropy functions. - */ -//#define POLARSSL_NO_DEFAULT_ENTROPY_SOURCES - -/** - * \def POLARSSL_NO_PLATFORM_ENTROPY - * - * Do not use built-in platform entropy functions. - * This is useful if your platform does not support - * standards like the /dev/urandom or Windows CryptoAPI. - * - * Uncomment this macro to disable the built-in platform entropy functions. - */ -//#define POLARSSL_NO_PLATFORM_ENTROPY - -/** - * \def POLARSSL_ENTROPY_FORCE_SHA256 - * - * Force the entropy accumulator to use a SHA-256 accumulator instead of the - * default SHA-512 based one (if both are available). - * - * Requires: POLARSSL_SHA256_C - * - * On 32-bit systems SHA-256 can be much faster than SHA-512. Use this option - * if you have performance concerns. - * - * This option is only useful if both POLARSSL_SHA256_C and - * POLARSSL_SHA512_C are defined. Otherwise the available hash module is used. - */ -//#define POLARSSL_ENTROPY_FORCE_SHA256 - -/** - * \def POLARSSL_MEMORY_DEBUG - * - * Enable debugging of buffer allocator memory issues. Automatically prints - * (to stderr) all (fatal) messages on memory allocation issues. Enables - * function for 'debug output' of allocated memory. - * - * Requires: POLARSSL_MEMORY_BUFFER_ALLOC_C - * - * Uncomment this macro to let the buffer allocator print out error messages. - */ -//#define POLARSSL_MEMORY_DEBUG - -/** - * \def POLARSSL_MEMORY_BACKTRACE - * - * Include backtrace information with each allocated block. - * - * Requires: POLARSSL_MEMORY_BUFFER_ALLOC_C - * GLIBC-compatible backtrace() an backtrace_symbols() support - * - * Uncomment this macro to include backtrace information - */ -//#define POLARSSL_MEMORY_BACKTRACE - -/** - * \def POLARSSL_PKCS1_V15 - * - * Enable support for PKCS#1 v1.5 encoding. - * - * Requires: POLARSSL_RSA_C - * - * This enables support for PKCS#1 v1.5 operations. - */ -#define POLARSSL_PKCS1_V15 - -/** - * \def POLARSSL_PKCS1_V21 - * - * Enable support for PKCS#1 v2.1 encoding. - * - * Requires: POLARSSL_MD_C, POLARSSL_RSA_C - * - * This enables support for RSAES-OAEP and RSASSA-PSS operations. - */ -//#define POLARSSL_PKCS1_V21 - -/** - * \def POLARSSL_RSA_NO_CRT - * - * Do not use the Chinese Remainder Theorem for the RSA private operation. - * - * Uncomment this macro to disable the use of CRT in RSA. - * - */ -//#define POLARSSL_RSA_NO_CRT - -/** - * \def POLARSSL_SELF_TEST - * - * Enable the checkup functions (*_self_test). - */ -#define POLARSSL_SELF_TEST - -/** - * \def POLARSSL_SSL_ALL_ALERT_MESSAGES - * - * Enable sending of alert messages in case of encountered errors as per RFC. - * If you choose not to send the alert messages, PolarSSL can still communicate - * with other servers, only debugging of failures is harder. - * - * The advantage of not sending alert messages, is that no information is given - * about reasons for failures thus preventing adversaries of gaining intel. - * - * Enable sending of all alert messages - */ -#define POLARSSL_SSL_ALERT_MESSAGES - -/** - * \def POLARSSL_SSL_DEBUG_ALL - * - * Enable the debug messages in SSL module for all issues. - * Debug messages have been disabled in some places to prevent timing - * attacks due to (unbalanced) debugging function calls. - * - * If you need all error reporting you should enable this during debugging, - * but remove this for production servers that should log as well. - * - * Uncomment this macro to report all debug messages on errors introducing - * a timing side-channel. - * - */ -//#define POLARSSL_SSL_DEBUG_ALL - -/** - * \def POLARSSL_SSL_HW_RECORD_ACCEL - * - * Enable hooking functions in SSL module for hardware acceleration of - * individual records. - * - * Uncomment this macro to enable hooking functions. - */ -//#define POLARSSL_SSL_HW_RECORD_ACCEL - -/** - * \def POLARSSL_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO - * - * Enable support for receiving and parsing SSLv2 Client Hello messages for the - * SSL Server module (POLARSSL_SSL_SRV_C). - * - * Comment this macro to disable support for SSLv2 Client Hello messages. - */ -#define POLARSSL_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO - -/** - * \def POLARSSL_SSL_SRV_RESPECT_CLIENT_PREFERENCE - * - * Pick the ciphersuite according to the client's preferences rather than ours - * in the SSL Server module (POLARSSL_SSL_SRV_C). - * - * Uncomment this macro to respect client's ciphersuite order - */ -//#define POLARSSL_SSL_SRV_RESPECT_CLIENT_PREFERENCE - -/** - * \def POLARSSL_SSL_MAX_FRAGMENT_LENGTH - * - * Enable support for RFC 6066 max_fragment_length extension in SSL. - * - * Comment this macro to disable support for the max_fragment_length extension - */ -#define POLARSSL_SSL_MAX_FRAGMENT_LENGTH - -/** - * \def POLARSSL_SSL_PROTO_SSL3 - * - * Enable support for SSL 3.0. - * - * Requires: POLARSSL_MD5_C - * POLARSSL_SHA1_C - * - * Comment this macro to disable support for SSL 3.0 - */ -#define POLARSSL_SSL_PROTO_SSL3 - -/** - * \def POLARSSL_SSL_PROTO_TLS1 - * - * Enable support for TLS 1.0. - * - * Requires: POLARSSL_MD5_C - * POLARSSL_SHA1_C - * - * Comment this macro to disable support for TLS 1.0 - */ -#define POLARSSL_SSL_PROTO_TLS1 - -/** - * \def POLARSSL_SSL_PROTO_TLS1_1 - * - * Enable support for TLS 1.1. - * - * Requires: POLARSSL_MD5_C - * POLARSSL_SHA1_C - * - * Comment this macro to disable support for TLS 1.1 - */ -#define POLARSSL_SSL_PROTO_TLS1_1 - -/** - * \def POLARSSL_SSL_PROTO_TLS1_2 - * - * Enable support for TLS 1.2. - * - * Requires: POLARSSL_SHA1_C or POLARSSL_SHA256_C or POLARSSL_SHA512_C - * (Depends on ciphersuites) - * - * Comment this macro to disable support for TLS 1.2 - */ -#define POLARSSL_SSL_PROTO_TLS1_2 - -/** - * \def POLARSSL_SSL_ALPN - * - * Enable support for Application Layer Protocol Negotiation. - * draft-ietf-tls-applayerprotoneg-05 - * - * Comment this macro to disable support for ALPN. - */ -#define POLARSSL_SSL_ALPN - -/** - * \def POLARSSL_SSL_SESSION_TICKETS - * - * Enable support for RFC 5077 session tickets in SSL. - * - * Requires: POLARSSL_AES_C - * POLARSSL_SHA256_C - * POLARSSL_CIPHER_MODE_CBC - * - * Comment this macro to disable support for SSL session tickets - */ -#define POLARSSL_SSL_SESSION_TICKETS - -/** - * \def POLARSSL_SSL_SERVER_NAME_INDICATION - * - * Enable support for RFC 6066 server name indication (SNI) in SSL. - * - * Comment this macro to disable support for server name indication in SSL - */ -#define POLARSSL_SSL_SERVER_NAME_INDICATION - -/** - * \def POLARSSL_SSL_TRUNCATED_HMAC - * - * Enable support for RFC 6066 truncated HMAC in SSL. - * - * Comment this macro to disable support for truncated HMAC in SSL - */ -#define POLARSSL_SSL_TRUNCATED_HMAC - -/** - * \def POLARSSL_SSL_SET_CURVES - * - * Enable ssl_set_curves(). - * - * This is disabled by default since it breaks binary compatibility with the - * 1.3.x line. If you choose to enable it, you will need to rebuild your - * application against the new header files, relinking will not be enough. - * It will be enabled by default, or no longer an option, in the 1.4 branch. - * - * Uncomment to make ssl_set_curves() available. - */ -//#define POLARSSL_SSL_SET_CURVES - -/** - * \def POLARSSL_THREADING_ALT - * - * Provide your own alternate threading implementation. - * - * Requires: POLARSSL_THREADING_C - * - * Uncomment this to allow your own alternate threading implementation. - */ -//#define POLARSSL_THREADING_ALT - -/** - * \def POLARSSL_THREADING_PTHREAD - * - * Enable the pthread wrapper layer for the threading layer. - * - * Requires: POLARSSL_THREADING_C - * - * Uncomment this to enable pthread mutexes. - */ -//#define POLARSSL_THREADING_PTHREAD - -/** - * \def POLARSSL_VERSION_FEATURES - * - * Allow run-time checking of compile-time enabled features. Thus allowing users - * to check at run-time if the library is for instance compiled with threading - * support via version_check_feature(). - * - * Requires: POLARSSL_VERSION_C - * - * Comment this to disable run-time checking and save ROM space - */ -#define POLARSSL_VERSION_FEATURES - -/** - * \def POLARSSL_X509_ALLOW_EXTENSIONS_NON_V3 - * - * If set, the X509 parser will not break-off when parsing an X509 certificate - * and encountering an extension in a v1 or v2 certificate. - * - * Uncomment to prevent an error. - */ -//#define POLARSSL_X509_ALLOW_EXTENSIONS_NON_V3 - -/** - * \def POLARSSL_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION - * - * If set, the X509 parser will not break-off when parsing an X509 certificate - * and encountering an unknown critical extension. - * - * Uncomment to prevent an error. - */ -//#define POLARSSL_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION - -/** - * \def POLARSSL_X509_CHECK_KEY_USAGE - * - * Enable verification of the keyUsage extension (CA and leaf certificates). - * - * Disabling this avoids problems with mis-issued and/or misused - * (intermediate) CA and leaf certificates. - * - * \warning Depending on your PKI use, disabling this can be a security risk! - * - * Comment to skip keyUsage checking for both CA and leaf certificates. - */ -#define POLARSSL_X509_CHECK_KEY_USAGE - -/** - * \def POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE - * - * Enable verification of the extendedKeyUsage extension (leaf certificates). - * - * Disabling this avoids problems with mis-issued and/or misused certificates. - * - * \warning Depending on your PKI use, disabling this can be a security risk! - * - * Comment to skip extendedKeyUsage checking for certificates. - */ -#define POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE - -/** - * \def POLARSSL_X509_RSASSA_PSS_SUPPORT - * - * Enable parsing and verification of X.509 certificates, CRLs and CSRS - * signed with RSASSA-PSS (aka PKCS#1 v2.1). - * - * Comment this macro to disallow using RSASSA-PSS in certificates. - */ -#define POLARSSL_X509_RSASSA_PSS_SUPPORT - -/** - * \def POLARSSL_ZLIB_SUPPORT - * - * If set, the SSL/TLS module uses ZLIB to support compression and - * decompression of packet data. - * - * \warning TLS-level compression MAY REDUCE SECURITY! See for example the - * CRIME attack. Before enabling this option, you should examine with care if - * CRIME or similar exploits may be a applicable to your use case. - * - * Used in: library/ssl_tls.c - * library/ssl_cli.c - * library/ssl_srv.c - * - * This feature requires zlib library and headers to be present. - * - * Uncomment to enable use of ZLIB - */ -//#define POLARSSL_ZLIB_SUPPORT -/* \} name SECTION: PolarSSL feature support */ - -/** - * \name SECTION: PolarSSL modules - * - * This section enables or disables entire modules in PolarSSL - * \{ - */ - -/** - * \def POLARSSL_AESNI_C - * - * Enable AES-NI support on x86-64. - * - * Module: library/aesni.c - * Caller: library/aes.c - * - * Requires: POLARSSL_HAVE_ASM - * - * This modules adds support for the AES-NI instructions on x86-64 - */ -//#define POLARSSL_AESNI_C - -/** - * \def POLARSSL_AES_C - * - * Enable the AES block cipher. - * - * Module: library/aes.c - * Caller: library/ssl_tls.c - * library/pem.c - * library/ctr_drbg.c - * - * This module enables the following ciphersuites (if other requisites are - * enabled as well): - * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA - * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA - * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA - * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA - * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 - * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 - * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 - * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 - * TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 - * TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 - * TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 - * TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 - * TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 - * TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 - * TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 - * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 - * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 - * TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 - * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA - * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA - * TLS_DHE_RSA_WITH_AES_256_CBC_SHA - * TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 - * TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 - * TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 - * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 - * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 - * TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 - * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA - * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA - * TLS_DHE_RSA_WITH_AES_128_CBC_SHA - * TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 - * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 - * TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 - * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA - * TLS_DHE_PSK_WITH_AES_256_CBC_SHA - * TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 - * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 - * TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 - * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA - * TLS_DHE_PSK_WITH_AES_128_CBC_SHA - * TLS_RSA_WITH_AES_256_GCM_SHA384 - * TLS_RSA_WITH_AES_256_CBC_SHA256 - * TLS_RSA_WITH_AES_256_CBC_SHA - * TLS_RSA_WITH_AES_128_GCM_SHA256 - * TLS_RSA_WITH_AES_128_CBC_SHA256 - * TLS_RSA_WITH_AES_128_CBC_SHA - * TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 - * TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 - * TLS_RSA_PSK_WITH_AES_256_CBC_SHA - * TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 - * TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 - * TLS_RSA_PSK_WITH_AES_128_CBC_SHA - * TLS_PSK_WITH_AES_256_GCM_SHA384 - * TLS_PSK_WITH_AES_256_CBC_SHA384 - * TLS_PSK_WITH_AES_256_CBC_SHA - * TLS_PSK_WITH_AES_128_GCM_SHA256 - * TLS_PSK_WITH_AES_128_CBC_SHA256 - * TLS_PSK_WITH_AES_128_CBC_SHA - * - * PEM_PARSE uses AES for decrypting encrypted keys. - */ -#define POLARSSL_AES_C - -/** - * \def POLARSSL_ARC4_C - * - * Enable the ARCFOUR stream cipher. - * - * Module: library/arc4.c - * Caller: library/ssl_tls.c - * - * This module enables the following ciphersuites (if other requisites are - * enabled as well): - * TLS_ECDH_ECDSA_WITH_RC4_128_SHA - * TLS_ECDH_RSA_WITH_RC4_128_SHA - * TLS_ECDHE_ECDSA_WITH_RC4_128_SHA - * TLS_ECDHE_RSA_WITH_RC4_128_SHA - * TLS_ECDHE_PSK_WITH_RC4_128_SHA - * TLS_DHE_PSK_WITH_RC4_128_SHA - * TLS_RSA_WITH_RC4_128_SHA - * TLS_RSA_WITH_RC4_128_MD5 - * TLS_RSA_PSK_WITH_RC4_128_SHA - * TLS_PSK_WITH_RC4_128_SHA - */ -#define POLARSSL_ARC4_C - -/** - * \def POLARSSL_ASN1_PARSE_C - * - * Enable the generic ASN1 parser. - * - * Module: library/asn1.c - * Caller: library/x509.c - * library/dhm.c - * library/pkcs12.c - * library/pkcs5.c - * library/pkparse.c - */ -#define POLARSSL_ASN1_PARSE_C - -/** - * \def POLARSSL_ASN1_WRITE_C - * - * Enable the generic ASN1 writer. - * - * Module: library/asn1write.c - * Caller: library/ecdsa.c - * library/pkwrite.c - * library/x509_create.c - * library/x509write_crt.c - * library/x509write_csr.c - */ -#define POLARSSL_ASN1_WRITE_C - -/** - * \def POLARSSL_BASE64_C - * - * Enable the Base64 module. - * - * Module: library/base64.c - * Caller: library/pem.c - * - * This module is required for PEM support (required by X.509). - */ -#define POLARSSL_BASE64_C - -/** - * \def POLARSSL_BIGNUM_C - * - * Enable the multi-precision integer library. - * - * Module: library/bignum.c - * Caller: library/dhm.c - * library/ecp.c - * library/ecdsa.c - * library/rsa.c - * library/ssl_tls.c - * - * This module is required for RSA, DHM and ECC (ECDH, ECDSA) support. - */ -#define POLARSSL_BIGNUM_C - -/** - * \def POLARSSL_BLOWFISH_C - * - * Enable the Blowfish block cipher. - * - * Module: library/blowfish.c - */ -#define POLARSSL_BLOWFISH_C - -/** - * \def POLARSSL_CAMELLIA_C - * - * Enable the Camellia block cipher. - * - * Module: library/camellia.c - * Caller: library/ssl_tls.c - * - * This module enables the following ciphersuites (if other requisites are - * enabled as well): - * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 - * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 - * TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256 - * TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384 - * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 - * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 - * TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256 - * TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384 - * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 - * TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 - * TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 - * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 - * TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 - * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 - * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA - * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 - * TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 - * TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 - * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 - * TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 - * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 - * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA - * TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384 - * TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 - * TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 - * TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256 - * TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 - * TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 - * TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384 - * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 - * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA - * TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256 - * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 - * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA - * TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384 - * TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384 - * TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256 - * TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256 - * TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384 - * TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384 - * TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256 - * TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256 - */ -#define POLARSSL_CAMELLIA_C - -/** - * \def POLARSSL_CCM_C - * - * Enable the Counter with CBC-MAC (CCM) mode for 128-bit block cipher. - * - * Module: library/ccm.c - * - * Requires: POLARSSL_AES_C or POLARSSL_CAMELLIA_C - * - * This module enables the AES-CCM ciphersuites, if other requisites are - * enabled as well. - */ -#define POLARSSL_CCM_C - -/** - * \def POLARSSL_CERTS_C - * - * Enable the test certificates. - * - * Module: library/certs.c - * Caller: - * - * Requires: POLARSSL_PEM_PARSE_C - * - * This module is used for testing (ssl_client/server). - */ -#define POLARSSL_CERTS_C - -/** - * \def POLARSSL_CIPHER_C - * - * Enable the generic cipher layer. - * - * Module: library/cipher.c - * Caller: library/ssl_tls.c - * - * Uncomment to enable generic cipher wrappers. - */ -#define POLARSSL_CIPHER_C - -/** - * \def POLARSSL_CTR_DRBG_C - * - * Enable the CTR_DRBG AES-256-based random generator. - * - * Module: library/ctr_drbg.c - * Caller: - * - * Requires: POLARSSL_AES_C - * - * This module provides the CTR_DRBG AES-256 random number generator. - */ -#define POLARSSL_CTR_DRBG_C - -/** - * \def POLARSSL_DEBUG_C - * - * Enable the debug functions. - * - * Module: library/debug.c - * Caller: library/ssl_cli.c - * library/ssl_srv.c - * library/ssl_tls.c - * - * This module provides debugging functions. - */ -#define POLARSSL_DEBUG_C - -/** - * \def POLARSSL_DES_C - * - * Enable the DES block cipher. - * - * Module: library/des.c - * Caller: library/pem.c - * library/ssl_tls.c - * - * This module enables the following ciphersuites (if other requisites are - * enabled as well): - * TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA - * TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA - * TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA - * TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA - * TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA - * TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA - * TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA - * TLS_RSA_WITH_3DES_EDE_CBC_SHA - * TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA - * TLS_PSK_WITH_3DES_EDE_CBC_SHA - * - * PEM_PARSE uses DES/3DES for decrypting encrypted keys. - */ -#define POLARSSL_DES_C - -/** - * \def POLARSSL_DHM_C - * - * Enable the Diffie-Hellman-Merkle module. - * - * Module: library/dhm.c - * Caller: library/ssl_cli.c - * library/ssl_srv.c - * - * This module is used by the following key exchanges: - * DHE-RSA, DHE-PSK - */ -#define POLARSSL_DHM_C - -/** - * \def POLARSSL_ECDH_C - * - * Enable the elliptic curve Diffie-Hellman library. - * - * Module: library/ecdh.c - * Caller: library/ssl_cli.c - * library/ssl_srv.c - * - * This module is used by the following key exchanges: - * ECDHE-ECDSA, ECDHE-RSA, DHE-PSK - * - * Requires: POLARSSL_ECP_C - */ -#define POLARSSL_ECDH_C - -/** - * \def POLARSSL_ECDSA_C - * - * Enable the elliptic curve DSA library. - * - * Module: library/ecdsa.c - * Caller: - * - * This module is used by the following key exchanges: - * ECDHE-ECDSA - * - * Requires: POLARSSL_ECP_C, POLARSSL_ASN1_WRITE_C, POLARSSL_ASN1_PARSE_C - */ -#define POLARSSL_ECDSA_C - -/** - * \def POLARSSL_ECP_C - * - * Enable the elliptic curve over GF(p) library. - * - * Module: library/ecp.c - * Caller: library/ecdh.c - * library/ecdsa.c - * - * Requires: POLARSSL_BIGNUM_C and at least one POLARSSL_ECP_DP_XXX_ENABLED - */ -#define POLARSSL_ECP_C - -/** - * \def POLARSSL_ENTROPY_C - * - * Enable the platform-specific entropy code. - * - * Module: library/entropy.c - * Caller: - * - * Requires: POLARSSL_SHA512_C or POLARSSL_SHA256_C - * - * This module provides a generic entropy pool - */ -#define POLARSSL_ENTROPY_C - -/** - * \def POLARSSL_ERROR_C - * - * Enable error code to error string conversion. - * - * Module: library/error.c - * Caller: - * - * This module enables polarssl_strerror(). - */ -#define POLARSSL_ERROR_C - -/** - * \def POLARSSL_GCM_C - * - * Enable the Galois/Counter Mode (GCM) for AES. - * - * Module: library/gcm.c - * - * Requires: POLARSSL_AES_C or POLARSSL_CAMELLIA_C - * - * This module enables the AES-GCM and CAMELLIA-GCM ciphersuites, if other - * requisites are enabled as well. - */ -#define POLARSSL_GCM_C - -/** - * \def POLARSSL_HAVEGE_C - * - * Enable the HAVEGE random generator. - * - * Warning: the HAVEGE random generator is not suitable for virtualized - * environments - * - * Warning: the HAVEGE random generator is dependent on timing and specific - * processor traits. It is therefore not advised to use HAVEGE as - * your applications primary random generator or primary entropy pool - * input. As a secondary input to your entropy pool, it IS able add - * the (limited) extra entropy it provides. - * - * Module: library/havege.c - * Caller: - * - * Requires: POLARSSL_TIMING_C - * - * Uncomment to enable the HAVEGE random generator. - */ -//#define POLARSSL_HAVEGE_C - -/** - * \def POLARSSL_HMAC_DRBG_C - * - * Enable the HMAC_DRBG random generator. - * - * Module: library/hmac_drbg.c - * Caller: - * - * Requires: POLARSSL_MD_C - * - * Uncomment to enable the HMAC_DRBG random number geerator. - */ -#define POLARSSL_HMAC_DRBG_C - -/** - * \def POLARSSL_MD_C - * - * Enable the generic message digest layer. - * - * Module: library/md.c - * Caller: - * - * Uncomment to enable generic message digest wrappers. - */ -#define POLARSSL_MD_C - -/** - * \def POLARSSL_MD2_C - * - * Enable the MD2 hash algorithm. - * - * Module: library/md2.c - * Caller: - * - * Uncomment to enable support for (rare) MD2-signed X.509 certs. - */ -//#define POLARSSL_MD2_C - -/** - * \def POLARSSL_MD4_C - * - * Enable the MD4 hash algorithm. - * - * Module: library/md4.c - * Caller: - * - * Uncomment to enable support for (rare) MD4-signed X.509 certs. - */ -//#define POLARSSL_MD4_C - -/** - * \def POLARSSL_MD5_C - * - * Enable the MD5 hash algorithm. - * - * Module: library/md5.c - * Caller: library/md.c - * library/pem.c - * library/ssl_tls.c - * - * This module is required for SSL/TLS and X.509. - * PEM_PARSE uses MD5 for decrypting encrypted keys. - */ -#define POLARSSL_MD5_C - -/** - * \def POLARSSL_MEMORY_C - * Deprecated since 1.3.5. Please use POLARSSL_PLATFORM_MEMORY instead. - */ -//#define POLARSSL_MEMORY_C - -/** - * \def POLARSSL_MEMORY_BUFFER_ALLOC_C - * - * Enable the buffer allocator implementation that makes use of a (stack) - * based buffer to 'allocate' dynamic memory. (replaces malloc() and free() - * calls) - * - * Module: library/memory_buffer_alloc.c - * - * Requires: POLARSSL_PLATFORM_C - * POLARSSL_PLATFORM_MEMORY (to use it within PolarSSL) - * - * Enable this module to enable the buffer memory allocator. - */ -//#define POLARSSL_MEMORY_BUFFER_ALLOC_C - -/** - * \def POLARSSL_NET_C - * - * Enable the TCP/IP networking routines. - * - * Module: library/net.c - * - * This module provides TCP/IP networking routines. - */ -#define POLARSSL_NET_C - -/** - * \def POLARSSL_OID_C - * - * Enable the OID database. - * - * Module: library/oid.c - * Caller: library/asn1write.c - * library/pkcs5.c - * library/pkparse.c - * library/pkwrite.c - * library/rsa.c - * library/x509.c - * library/x509_create.c - * library/x509_crl.c - * library/x509_crt.c - * library/x509_csr.c - * library/x509write_crt.c - * library/x509write_csr.c - * - * This modules translates between OIDs and internal values. - */ -#define POLARSSL_OID_C - -/** - * \def POLARSSL_PADLOCK_C - * - * Enable VIA Padlock support on x86. - * - * Module: library/padlock.c - * Caller: library/aes.c - * - * Requires: POLARSSL_HAVE_ASM - * - * This modules adds support for the VIA PadLock on x86. - */ -//#define POLARSSL_PADLOCK_C - -/** - * \def POLARSSL_PBKDF2_C - * - * Enable PKCS#5 PBKDF2 key derivation function. - * DEPRECATED: Use POLARSSL_PKCS5_C instead - * - * Module: library/pbkdf2.c - * - * Requires: POLARSSL_PKCS5_C - * - * This module adds support for the PKCS#5 PBKDF2 key derivation function. - */ -#define POLARSSL_PBKDF2_C - -/** - * \def POLARSSL_PEM_PARSE_C - * - * Enable PEM decoding / parsing. - * - * Module: library/pem.c - * Caller: library/dhm.c - * library/pkparse.c - * library/x509_crl.c - * library/x509_crt.c - * library/x509_csr.c - * - * Requires: POLARSSL_BASE64_C - * - * This modules adds support for decoding / parsing PEM files. - */ -#define POLARSSL_PEM_PARSE_C - -/** - * \def POLARSSL_PEM_WRITE_C - * - * Enable PEM encoding / writing. - * - * Module: library/pem.c - * Caller: library/pkwrite.c - * library/x509write_crt.c - * library/x509write_csr.c - * - * Requires: POLARSSL_BASE64_C - * - * This modules adds support for encoding / writing PEM files. - */ -#define POLARSSL_PEM_WRITE_C - -/** - * \def POLARSSL_PK_C - * - * Enable the generic public (asymetric) key layer. - * - * Module: library/pk.c - * Caller: library/ssl_tls.c - * library/ssl_cli.c - * library/ssl_srv.c - * - * Requires: POLARSSL_RSA_C or POLARSSL_ECP_C - * - * Uncomment to enable generic public key wrappers. - */ -#define POLARSSL_PK_C - -/** - * \def POLARSSL_PK_PARSE_C - * - * Enable the generic public (asymetric) key parser. - * - * Module: library/pkparse.c - * Caller: library/x509_crt.c - * library/x509_csr.c - * - * Requires: POLARSSL_PK_C - * - * Uncomment to enable generic public key parse functions. - */ -#define POLARSSL_PK_PARSE_C - -/** - * \def POLARSSL_PK_WRITE_C - * - * Enable the generic public (asymetric) key writer. - * - * Module: library/pkwrite.c - * Caller: library/x509write.c - * - * Requires: POLARSSL_PK_C - * - * Uncomment to enable generic public key write functions. - */ -#define POLARSSL_PK_WRITE_C - -/** - * \def POLARSSL_PKCS5_C - * - * Enable PKCS#5 functions. - * - * Module: library/pkcs5.c - * - * Requires: POLARSSL_MD_C - * - * This module adds support for the PKCS#5 functions. - */ -#define POLARSSL_PKCS5_C - -/** - * \def POLARSSL_PKCS11_C - * - * Enable wrapper for PKCS#11 smartcard support. - * - * Module: library/pkcs11.c - * Caller: library/pk.c - * - * Requires: POLARSSL_PK_C - * - * This module enables SSL/TLS PKCS #11 smartcard support. - * Requires the presence of the PKCS#11 helper library (libpkcs11-helper) - */ -//#define POLARSSL_PKCS11_C - -/** - * \def POLARSSL_PKCS12_C - * - * Enable PKCS#12 PBE functions. - * Adds algorithms for parsing PKCS#8 encrypted private keys - * - * Module: library/pkcs12.c - * Caller: library/pkparse.c - * - * Requires: POLARSSL_ASN1_PARSE_C, POLARSSL_CIPHER_C, POLARSSL_MD_C - * Can use: POLARSSL_ARC4_C - * - * This module enables PKCS#12 functions. - */ -#define POLARSSL_PKCS12_C - -/** - * \def POLARSSL_PLATFORM_C - * - * Enable the platform abstraction layer that allows you to re-assign - * functions like malloc(), free(), printf(), fprintf() - * - * Module: library/platform.c - * Caller: Most other .c files - * - * This module enables abstraction of common (libc) functions. - */ -//#define POLARSSL_PLATFORM_C - -/** - * \def POLARSSL_RIPEMD160_C - * - * Enable the RIPEMD-160 hash algorithm. - * - * Module: library/ripemd160.c - * Caller: library/md.c - * - */ -#define POLARSSL_RIPEMD160_C - -/** - * \def POLARSSL_RSA_C - * - * Enable the RSA public-key cryptosystem. - * - * Module: library/rsa.c - * Caller: library/ssl_cli.c - * library/ssl_srv.c - * library/ssl_tls.c - * library/x509.c - * - * This module is used by the following key exchanges: - * RSA, DHE-RSA, ECDHE-RSA, RSA-PSK - * - * Requires: POLARSSL_BIGNUM_C, POLARSSL_OID_C - */ -#define POLARSSL_RSA_C - -/** - * \def POLARSSL_SHA1_C - * - * Enable the SHA1 cryptographic hash algorithm. - * - * Module: library/sha1.c - * Caller: library/md.c - * library/ssl_cli.c - * library/ssl_srv.c - * library/ssl_tls.c - * library/x509write_crt.c - * - * This module is required for SSL/TLS and SHA1-signed certificates. - */ -#define POLARSSL_SHA1_C - -/** - * \def POLARSSL_SHA256_C - * - * Enable the SHA-224 and SHA-256 cryptographic hash algorithms. - * (Used to be POLARSSL_SHA2_C) - * - * Module: library/sha256.c - * Caller: library/entropy.c - * library/md.c - * library/ssl_cli.c - * library/ssl_srv.c - * library/ssl_tls.c - * - * This module adds support for SHA-224 and SHA-256. - * This module is required for the SSL/TLS 1.2 PRF function. - */ -#define POLARSSL_SHA256_C - -/** - * \def POLARSSL_SHA512_C - * - * Enable the SHA-384 and SHA-512 cryptographic hash algorithms. - * (Used to be POLARSSL_SHA4_C) - * - * Module: library/sha512.c - * Caller: library/entropy.c - * library/md.c - * library/ssl_cli.c - * library/ssl_srv.c - * - * This module adds support for SHA-384 and SHA-512. - */ -#define POLARSSL_SHA512_C - -/** - * \def POLARSSL_SSL_CACHE_C - * - * Enable simple SSL cache implementation. - * - * Module: library/ssl_cache.c - * Caller: - * - * Requires: POLARSSL_SSL_CACHE_C - */ -#define POLARSSL_SSL_CACHE_C - -/** - * \def POLARSSL_SSL_CLI_C - * - * Enable the SSL/TLS client code. - * - * Module: library/ssl_cli.c - * Caller: - * - * Requires: POLARSSL_SSL_TLS_C - * - * This module is required for SSL/TLS client support. - */ -#define POLARSSL_SSL_CLI_C - -/** - * \def POLARSSL_SSL_SRV_C - * - * Enable the SSL/TLS server code. - * - * Module: library/ssl_srv.c - * Caller: - * - * Requires: POLARSSL_SSL_TLS_C - * - * This module is required for SSL/TLS server support. - */ -#define POLARSSL_SSL_SRV_C - -/** - * \def POLARSSL_SSL_TLS_C - * - * Enable the generic SSL/TLS code. - * - * Module: library/ssl_tls.c - * Caller: library/ssl_cli.c - * library/ssl_srv.c - * - * Requires: POLARSSL_CIPHER_C, POLARSSL_MD_C - * and at least one of the POLARSSL_SSL_PROTO_* defines - * - * This module is required for SSL/TLS. - */ -#define POLARSSL_SSL_TLS_C - -/** - * \def POLARSSL_THREADING_C - * - * Enable the threading abstraction layer. - * By default PolarSSL assumes it is used in a non-threaded environment or that - * contexts are not shared between threads. If you do intend to use contexts - * between threads, you will need to enable this layer to prevent race - * conditions. - * - * Module: library/threading.c - * - * This allows different threading implementations (self-implemented or - * provided). - * - * You will have to enable either POLARSSL_THREADING_ALT or - * POLARSSL_THREADING_PTHREAD. - * - * Enable this layer to allow use of mutexes within PolarSSL - */ -//#define POLARSSL_THREADING_C - -/** - * \def POLARSSL_TIMING_C - * - * Enable the portable timing interface. - * - * Module: library/timing.c - * Caller: library/havege.c - * - * This module is used by the HAVEGE random number generator. - */ -#define POLARSSL_TIMING_C - -/** - * \def POLARSSL_VERSION_C - * - * Enable run-time version information. - * - * Module: library/version.c - * - * This module provides run-time version information. - */ -#define POLARSSL_VERSION_C - -/** - * \def POLARSSL_X509_USE_C - * - * Enable X.509 core for using certificates. - * - * Module: library/x509.c - * Caller: library/x509_crl.c - * library/x509_crt.c - * library/x509_csr.c - * - * Requires: POLARSSL_ASN1_PARSE_C, POLARSSL_BIGNUM_C, POLARSSL_OID_C, - * POLARSSL_PK_PARSE_C - * - * This module is required for the X.509 parsing modules. - */ -#define POLARSSL_X509_USE_C - -/** - * \def POLARSSL_X509_CRT_PARSE_C - * - * Enable X.509 certificate parsing. - * - * Module: library/x509_crt.c - * Caller: library/ssl_cli.c - * library/ssl_srv.c - * library/ssl_tls.c - * - * Requires: POLARSSL_X509_USE_C - * - * This module is required for X.509 certificate parsing. - */ -#define POLARSSL_X509_CRT_PARSE_C - -/** - * \def POLARSSL_X509_CRL_PARSE_C - * - * Enable X.509 CRL parsing. - * - * Module: library/x509_crl.c - * Caller: library/x509_crt.c - * - * Requires: POLARSSL_X509_USE_C - * - * This module is required for X.509 CRL parsing. - */ -#define POLARSSL_X509_CRL_PARSE_C - -/** - * \def POLARSSL_X509_CSR_PARSE_C - * - * Enable X.509 Certificate Signing Request (CSR) parsing. - * - * Module: library/x509_csr.c - * Caller: library/x509_crt_write.c - * - * Requires: POLARSSL_X509_USE_C - * - * This module is used for reading X.509 certificate request. - */ -#define POLARSSL_X509_CSR_PARSE_C - -/** - * \def POLARSSL_X509_CREATE_C - * - * Enable X.509 core for creating certificates. - * - * Module: library/x509_create.c - * - * Requires: POLARSSL_BIGNUM_C, POLARSSL_OID_C, POLARSSL_PK_WRITE_C - * - * This module is the basis for creating X.509 certificates and CSRs. - */ -#define POLARSSL_X509_CREATE_C - -/** - * \def POLARSSL_X509_CRT_WRITE_C - * - * Enable creating X.509 certificates. - * - * Module: library/x509_crt_write.c - * - * Requires: POLARSSL_CREATE_C - * - * This module is required for X.509 certificate creation. - */ -#define POLARSSL_X509_CRT_WRITE_C - -/** - * \def POLARSSL_X509_CSR_WRITE_C - * - * Enable creating X.509 Certificate Signing Requests (CSR). - * - * Module: library/x509_csr_write.c - * - * Requires: POLARSSL_CREATE_C - * - * This module is required for X.509 certificate request writing. - */ -#define POLARSSL_X509_CSR_WRITE_C - -/** - * \def POLARSSL_XTEA_C - * - * Enable the XTEA block cipher. - * - * Module: library/xtea.c - * Caller: - */ -#define POLARSSL_XTEA_C - -/* \} name SECTION: PolarSSL modules */ - -/** - * \name SECTION: Module configuration options - * - * This section allows for the setting of module specific sizes and - * configuration options. The default values are already present in the - * relevant header files and should suffice for the regular use cases. - * - * Our advice is to enable options and change their values here - * only if you have a good reason and know the consequences. - * - * Please check the respective header file for documentation on these - * parameters (to prevent duplicate documentation). - * \{ - */ - -/* MPI / BIGNUM options */ -//#define POLARSSL_MPI_WINDOW_SIZE 6 /**< Maximum windows size used. */ -//#define POLARSSL_MPI_MAX_SIZE 1024 /**< Maximum number of bytes for usable MPIs. */ - -/* CTR_DRBG options */ -//#define CTR_DRBG_ENTROPY_LEN 48 /**< Amount of entropy used per seed by default (48 with SHA-512, 32 with SHA-256) */ -//#define CTR_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */ -//#define CTR_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */ -//#define CTR_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */ -//#define CTR_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */ - -/* HMAC_DRBG options */ -//#define POLARSSL_HMAC_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */ -//#define POLARSSL_HMAC_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */ -//#define POLARSSL_HMAC_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */ -//#define POLARSSL_HMAC_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */ - -/* ECP options */ -//#define POLARSSL_ECP_MAX_BITS 521 /**< Maximum bit size of groups */ -//#define POLARSSL_ECP_WINDOW_SIZE 6 /**< Maximum window size used */ -//#define POLARSSL_ECP_FIXED_POINT_OPTIM 1 /**< Enable fixed-point speed-up */ - -/* Entropy options */ -//#define ENTROPY_MAX_SOURCES 20 /**< Maximum number of sources supported */ -//#define ENTROPY_MAX_GATHER 128 /**< Maximum amount requested from entropy sources */ - -/* Memory buffer allocator options */ -//#define POLARSSL_MEMORY_ALIGN_MULTIPLE 4 /**< Align on multiples of this value */ - -/* Platform options */ -//#define POLARSSL_PLATFORM_STD_MEM_HDR /**< Header to include if POLARSSL_PLATFORM_NO_STD_FUNCTIONS is defined. Don't define if no header is needed. */ -//#define POLARSSL_PLATFORM_STD_MALLOC malloc /**< Default allocator to use, can be undefined */ -//#define POLARSSL_PLATFORM_STD_FREE free /**< Default free to use, can be undefined */ -//#define POLARSSL_PLATFORM_STD_PRINTF printf /**< Default printf to use, can be undefined */ -//#define POLARSSL_PLATFORM_STD_FPRINTF fprintf /**< Default fprintf to use, can be undefined */ - -/* SSL Cache options */ -//#define SSL_CACHE_DEFAULT_TIMEOUT 86400 /**< 1 day */ -//#define SSL_CACHE_DEFAULT_MAX_ENTRIES 50 /**< Maximum entries in cache */ - -/* SSL options */ -//#define SSL_MAX_CONTENT_LEN 16384 /**< Size of the input / output buffer */ -//#define SSL_DEFAULT_TICKET_LIFETIME 86400 /**< Lifetime of session tickets (if enabled) */ -//#define POLARSSL_PSK_MAX_LEN 32 /**< Max size of TLS pre-shared keys, in bytes (default 256 bits) */ - -/** - * Complete list of ciphersuites to use, in order of preference. - * - * \warning No dependency checking is done on that field! This option can only - * be used to restrict the set of available ciphersuites. It is your - * responsibility to make sure the needed modules are active. - * - * Use this to save a few hundred bytes of ROM (default ordering of all - * available ciphersuites) and a few to a few hundred bytes of RAM. - * - * The value below is only an example, not the default. - */ -//#define SSL_CIPHERSUITES TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 - -/* Debug options */ -//#define POLARSSL_DEBUG_DFL_MODE POLARSSL_DEBUG_LOG_FULL /**< Default log: Full or Raw */ - -/* \} name SECTION: Module configuration options */ - - -#endif /* POLARSSL_CONFIG_H */