X-Git-Url: http://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/902cb3c00b49535f0de9a3b6d5ba0c54260ccac1..ca363c2348145c3c7e67d27aa9a64ff065459d55:/armsrc/appmain.c?ds=sidebyside

diff --git a/armsrc/appmain.c b/armsrc/appmain.c
index e501dfdd..7fc399a6 100644
--- a/armsrc/appmain.c
+++ b/armsrc/appmain.c
@@ -79,7 +79,8 @@ void ToSendStuffBit(int b)
 
 void DbpString(char *str)
 {
-  cmd_send(CMD_DEBUG_PRINT_STRING,strlen(str),0,0,(byte_t*)str,strlen(str));
+  byte_t len = strlen(str);
+  cmd_send(CMD_DEBUG_PRINT_STRING,len,0,0,(byte_t*)str,len);
 //	/* this holds up stuff unless we're connected to usb */
 //	if (!UsbConnected())
 //		return;
@@ -387,8 +388,9 @@ void SamyRun()
 
 	for (;;)
 	{
-		UsbPoll(FALSE);
-		WDT_HIT();
+//		UsbPoll(FALSE);
+		usb_poll();
+    WDT_HIT();
 
 		// Was our button held down or pressed?
 		int button_pressed = BUTTON_HELD(1000);
@@ -635,8 +637,8 @@ void UsbPacketReceived(uint8_t *packet, int len)
 		case CMD_HID_SIM_TAG:
 			CmdHIDsimTAG(c->arg[0], c->arg[1], 1);					// Simulate HID tag by ID
 			break;
-		case CMD_HID_CLONE_TAG:
-			CopyHIDtoT55x7(c->arg[0], c->arg[1]);					// Clone HID tag by ID to T55x7
+    case CMD_HID_CLONE_TAG: // Clone HID tag by ID to T55x7
+      CopyHIDtoT55x7(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0]);
 			break;
 		case CMD_EM410X_WRITE_TAG:
 			WriteEM410x(c->arg[0], c->arg[1], c->arg[2]);
@@ -661,6 +663,26 @@ void UsbPacketReceived(uint8_t *packet, int len)
 		case CMD_INDALA_CLONE_TAG_L:					// Clone Indala 224-bit tag by UID to T55x7
 			CopyIndala224toT55x7(c->d.asDwords[0], c->d.asDwords[1], c->d.asDwords[2], c->d.asDwords[3], c->d.asDwords[4], c->d.asDwords[5], c->d.asDwords[6]);
 			break;
+    case CMD_T55XX_READ_BLOCK:
+      T55xxReadBlock(c->arg[1], c->arg[2],c->d.asBytes[0]);
+      break;
+    case CMD_T55XX_WRITE_BLOCK:
+      T55xxWriteBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0]);
+      break;
+    case CMD_T55XX_READ_TRACE: // Clone HID tag by ID to T55x7
+      T55xxReadTrace();
+      break;
+    case CMD_PCF7931_READ: // Read PCF7931 tag
+      ReadPCF7931();
+      cmd_send(CMD_ACK,0,0,0,0,0);
+//      UsbSendPacket((uint8_t*)&ack, sizeof(ack));
+      break;
+    case CMD_EM4X_READ_WORD:
+      EM4xReadWord(c->arg[1], c->arg[2],c->d.asBytes[0]);
+      break;
+    case CMD_EM4X_WRITE_WORD:
+      EM4xWriteWord(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0]);
+      break;
 #endif
 
 #ifdef WITH_HITAG
@@ -743,7 +765,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
 			ReaderIso14443a(c);
 			break;
 		case CMD_SIMULATE_TAG_ISO_14443a:
-			SimulateIso14443aTag(c->arg[0], c->arg[1], c->arg[2]);  // ## Simulate iso14443a tag - pass tag type & UID
+			SimulateIso14443aTag(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);  // ## Simulate iso14443a tag - pass tag type & UID
 			break;
 		case CMD_EPA_PACE_COLLECT_NONCE:
 			EPA_PACE_Collect_Nonce(c);
@@ -905,7 +927,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
 		case CMD_SETUP_WRITE:
 		case CMD_FINISH_WRITE:
 		case CMD_HARDWARE_RESET: {
-			USB_D_PLUS_PULLUP_OFF();
+      usb_disable();
 			SpinDelay(1000);
 			SpinDelay(1000);
 			AT91C_BASE_RSTC->RSTC_RCR = RST_CONTROL_KEY | AT91C_RSTC_PROCRST;
@@ -918,7 +940,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
 			if(common_area.flags.bootrom_present) {
 				common_area.command = COMMON_AREA_COMMAND_ENTER_FLASH_MODE;
 			}
-			USB_D_PLUS_PULLUP_OFF();
+      usb_disable();
 			AT91C_BASE_RSTC->RSTC_RCR = RST_CONTROL_KEY | AT91C_RSTC_PROCRST;
 			for(;;);
         } break;
@@ -953,9 +975,8 @@ void  __attribute__((noreturn)) AppMain(void)
 	LED_B_OFF();
 	LED_A_OFF();
 
-  // Init USB device
+  // Init USB device`
   usb_enable();
-  UsbStart();
 //	UsbStart();
 
 	// The FPGA gets its clock from us from PCK0 output, so set that up.