X-Git-Url: http://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/b1d0de0a0847eba673cfaa965fadc56556d6364a..aa4d9d9b73f7218d40bdb30efffea5e001498bda:/armsrc/Makefile.linux

diff --git a/armsrc/Makefile.linux b/armsrc/Makefile.linux
index 0f2d0d4e..98c9c386 100644
--- a/armsrc/Makefile.linux
+++ b/armsrc/Makefile.linux
@@ -1,67 +1,77 @@
 # This makefile needs to be edited to reflect the location
-# of your own arm-elf-gcc installation (LIB variable)
+# of your own arm-elf-gcc toolchain (LIB variable)
 
 CC	= arm-elf-gcc
 AS	= arm-elf-as
 LD	= arm-elf-ld
 OBJCOPY = arm-elf-objcopy
 
-INCLUDE = -I../include
-
-INCLUDES = ../include/proxmark3.h ../include/at91sam7s128.h ../include/config_gpio.h ../include/usb_cmd.h apps.h
+# Indicate where your gnuarm toolchain libgcc.a library is located:
 LIB = /usr/local/new/gnuarm-4.3.0/lib/gcc/arm-elf/4.3.0/interwork
 
+# Add -DWITH_LCD to EXTRA_CFLAGS if you want support for LCD
+# in your firmware (add OBJLCD to OBJ too!)
+#EXTRA_CFLAGS = -DWITH_LCD
+EXTRA_CFLAGS =
+
+### You should not need to edit below this line
+
+INCLUDE = -I../include
+INCLUDES = ../include/proxmark3.h ../include/at91sam7s128.h ../include/config_gpio.h ../include/usb_cmd.h apps.h
 CFLAGS_COMMON = -O6 -c $(INCLUDE) -Wall  -mthumb-interwork
-CFLAGS	= $(CFLAGS_COMMON) -mthumb
+CFLAGS	= $(CFLAGS_COMMON) $(EXTRA_CFLAGS) -mthumb
 
 
 OBJDIR = obj
-OBJ =	start.o \
-		appmain.o \
-		fpga.o \
-		iso15693.o \
-		iso14443.o \
-		util.o\
-		LCD.o\
-		fonts.o
 
-OBJFAST =	iso14443a.o
+OBJLCD = $(OBJDIR)/LCD.o\
+		 $(OBJDIR)/fonts.o
+
+OBJ =	$(OBJDIR)/start.o \
+		$(OBJDIR)/appmain.o \
+		$(OBJDIR)/fpga.o \
+		$(OBJDIR)/iso15693.o \
+		$(OBJDIR)/iso14443.o \
+		$(OBJDIR)/util.o
 
-OBJFPGA =	fpgaimg.o
 
-OBJCOMMON =	usb.o
+OBJFAST =	$(OBJDIR)/iso14443a.o
 
+OBJFPGA =	$(OBJDIR)/fpgaimg.o
+
+OBJCOMMON =	$(OBJDIR)/usb.o
 
 all: osimage.s19 fpgaimage.s19 fullimage.s19
 
 fpgaimage.s19: $(OBJFPGA)
 	@echo fpgaimage.s19
-	$(LD) -g -Tldscript-fpga -o fpgaimage.elf $(patsubst %.o, obj/%.o, $^)
-	$(OBJCOPY) -Osrec --srec-forceS3 fpgaimage.elf fpgaimage.s19
+	$(LD) -g -Tldscript-fpga -o $(OBJDIR)/fpgaimage.elf $^
+	$(OBJCOPY) -Osrec --srec-forceS3 $(OBJDIR)/fpgaimage.elf fpgaimage.s19
 
 osimage.s19: $(OBJ) $(OBJFAST) $(OBJCOMMON)
 	@echo osimage.s19
-	$(LD) -g -Tldscript -o osimage.elf $(patsubst %.o, obj/%.o, $^) $(LIB)/libgcc.a
-	$(OBJCOPY) -Osrec --srec-forceS3 osimage.elf osimage.s19
+	$(LD) -g -Tldscript -o $(OBJDIR)/osimage.elf $^ $(LIB)/libgcc.a
+	$(OBJCOPY) -Osrec --srec-forceS3 $(OBJDIR)/osimage.elf osimage.s19
 
 fullimage.s19: $(OBJ) $(OBJFAST) $(OBJCOMMON) $(OBJFAST) $(OBJFPGA)
 	@echo fullimage.s19
-	$(LD) -g -Tldscript-full -o fullimage.elf $(patsubst %.o, obj/%.o, $^)  $(LIB)/libgcc.a
-	$(OBJCOPY) -Osrec --srec-forceS3 fullimage.elf fullimage.s19
-
-$(OBJ): %.o : %.c
-	$(CC) $(CFLAGS) $< -o $(OBJDIR)/$@
+	$(LD) -g -Tldscript-full -o $(OBJDIR)/fullimage.elf $^  $(LIB)/libgcc.a
+	$(OBJCOPY) -Osrec --srec-forceS3 $(OBJDIR)/fullimage.elf fullimage.s19
 
-$(OBJFPGA): %.o : %.c
-	$(CC) $(CFLAGS) $< -o $(OBJDIR)/$@
+# Directives to put the *.o in the OBJDIR directory:
+$(OBJ): $(OBJDIR)/%.o : %.c
+	$(CC) $(CFLAGS) $< -o $@
 
+$(OBJFPGA): $(OBJDIR)/%.o : %.c
+	$(CC) $(CFLAGS) $< -o $@
 
-$(OBJFAST): %.o : %.c
-	$(CC) $(CFLAGS_COMMON) $< -o $(OBJDIR)/$@
+$(OBJFAST): $(OBJDIR)/%.o : %.c
+	$(CC) $(CFLAGS_COMMON) $< -o $@
 	
-$(OBJCOMMON): ../common/usb.c
-	$(CC) $(CFLAGS) ../common/usb.c -o $(OBJDIR)/usb.o
+$(OBJCOMMON): $(OBJDIR)/%.o : ../common/%.c
+	$(CC) $(CFLAGS) $< -o $@
 
+# Those do not work on the current firmware !
 flash-fpga: fpgaimage.s19
 	../linux/flasher fpga fpgaimage.s19
 
@@ -78,6 +88,6 @@ jtag-flash: osimage.s19
 	../../OpenOCD/openocd -c "halt; flash write_image osimage.s19 0x00100000; halt; reset; resume; poll; exit"
 
 clean:
-	rm -f $(OBJDIR)/*.o *.elf *.s19
+	rm -f $(OBJDIR)/*.o $(OBJDIR)/*.elf *.s19
 
 .PHONY: all clean