X-Git-Url: http://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/e04475c42128e4b61c96cab0ff2c1a47d6413885..bad582468fd7617e99db8c37789b5523e3ff6b9d:/armsrc/util.c?ds=inline diff --git a/armsrc/util.c b/armsrc/util.c index a0fa50d3..aac68a34 100644 --- a/armsrc/util.c +++ b/armsrc/util.c @@ -81,11 +81,6 @@ void lsl (uint8_t *data, size_t len) { data[len - 1] <<= 1; } -int32_t le24toh (uint8_t data[3]) -{ - return (data[2] << 16) | (data[1] << 8) | data[0]; -} - void LEDsoff() { LED_A_OFF(); @@ -94,6 +89,22 @@ void LEDsoff() LED_D_OFF(); } +void LEDson() +{ + LED_A_ON(); + LED_B_ON(); + LED_C_ON(); + LED_D_ON(); +} + +void LEDsinvert() +{ + LED_A_INV(); + LED_B_INV(); + LED_C_INV(); + LED_D_INV(); +} + // LEDs: R(C) O(A) G(B) -- R(D) [1, 2, 4 and 8] void LED(int led, int ms) { @@ -292,6 +303,7 @@ void FormatVersionInformation(char *dst, int len, const char *prefix, void *vers strncat(dst, "\n", len - strlen(dst) - 1); } + // ------------------------------------------------------------------------- // timer lib // ------------------------------------------------------------------------- @@ -312,6 +324,7 @@ void StartTickCount() // note: worst case precision is approx 2.5% } + /* * Get the current count. */ @@ -319,6 +332,7 @@ uint32_t RAMFUNC GetTickCount(){ return AT91C_BASE_RTTC->RTTC_RTVR;// was * 2; } + // ------------------------------------------------------------------------- // microseconds timer // ------------------------------------------------------------------------- @@ -344,10 +358,12 @@ void StartCountUS() AT91C_BASE_TCB->TCB_BCR = 1; } + uint32_t RAMFUNC GetCountUS(){ return (AT91C_BASE_TC1->TC_CV * 0x8000) + ((AT91C_BASE_TC0->TC_CV * 2) / 3); //was /15) * 10); } + static uint32_t GlobalUsCounter = 0; uint32_t RAMFUNC GetDeltaCountUS(){ @@ -373,13 +389,13 @@ void StartCountSspClk() AT91C_BASE_TC1->TC_CMR = AT91C_TC_CLKS_TIMER_DIV1_CLOCK // TC1 Clock = MCK(48MHz)/2 = 24MHz | AT91C_TC_CPCSTOP // Stop clock on RC compare | AT91C_TC_EEVTEDG_RISING // Trigger on rising edge of Event - | AT91C_TC_EEVT_TIOB // Event-Source: TIOB1 (= ssp_clk from FPGA = 13,56MHz/16) + | AT91C_TC_EEVT_TIOB // Event-Source: TIOB1 (= ssp_clk from FPGA = 13,56MHz/16 ... 13,56MHz/4) | AT91C_TC_ENETRG // Enable external trigger event | AT91C_TC_WAVESEL_UP // Upmode without automatic trigger on RC compare | AT91C_TC_WAVE // Waveform Mode | AT91C_TC_AEEVT_SET // Set TIOA1 on external event | AT91C_TC_ACPC_CLEAR; // Clear TIOA1 on RC Compare - AT91C_BASE_TC1->TC_RC = 0x04; // RC Compare value = 0x04 + AT91C_BASE_TC1->TC_RC = 0x02; // RC Compare value = 0x02 // use TC0 to count TIOA1 pulses AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS; // disable TC0 @@ -402,7 +418,7 @@ void StartCountSspClk() AT91C_BASE_TC2->TC_CCR = AT91C_TC_CLKEN; // enable TC2 // - // synchronize the counter with the ssp_frame signal. Note: FPGA must be in any iso14446 mode, otherwise the frame signal would not be present + // synchronize the counter with the ssp_frame signal. Note: FPGA must be in a FPGA mode with SSC transfer, otherwise SSC_FRAME and SSC_CLK signals would not be present // while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_FRAME)); // wait for ssp_frame to go high (start of frame) while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_FRAME); // wait for ssp_frame to be low @@ -416,8 +432,11 @@ void StartCountSspClk() // (just started with the transfer of the 4th Bit). // The high word of the counter (TC2) will not reset until the low word (TC0) overflows. Therefore need to wait quite some time before // we can use the counter. - while (AT91C_BASE_TC0->TC_CV < 0xFFF0); + while (AT91C_BASE_TC0->TC_CV < 0xFFFF); + // Note: needs one more SSP_CLK cycle (1.18 us) until TC2 resets. Don't call GetCountSspClk() that soon. } + + void ResetSspClk(void) { //enable clock of timer and software trigger AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; @@ -425,78 +444,112 @@ void ResetSspClk(void) { AT91C_BASE_TC2->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; while (AT91C_BASE_TC2->TC_CV > 0); } -uint32_t RAMFUNC GetCountSspClk(){ - uint32_t tmp_count; - tmp_count = (AT91C_BASE_TC2->TC_CV << 16) | AT91C_BASE_TC0->TC_CV; - if ((tmp_count & 0x0000ffff) == 0) { //small chance that we may have missed an increment in TC2 - return (AT91C_BASE_TC2->TC_CV << 16); - } - else { - return tmp_count; - } + + +uint32_t GetCountSspClk(){ + uint32_t hi, lo; + + do { + hi = AT91C_BASE_TC2->TC_CV; + lo = AT91C_BASE_TC0->TC_CV; + } while(hi != AT91C_BASE_TC2->TC_CV); + + return (hi << 16) | lo; } + // ------------------------------------------------------------------------- -// Timer for bitbanging, or LF stuff when you need a very precis timer +// Timer for bitbanging, or LF stuff when you need a very precis timer // 1us = 1.5ticks // ------------------------------------------------------------------------- void StartTicks(void){ - //initialization of the timer - // tc1 is higher 0xFFFF0000 - // tc0 is lower 0x0000FFFF + // initialization of the timer AT91C_BASE_PMC->PMC_PCER |= (1 << AT91C_ID_TC0) | (1 << AT91C_ID_TC1); AT91C_BASE_TCB->TCB_BMR = AT91C_TCB_TC0XC0S_NONE | AT91C_TCB_TC1XC1S_TIOA0 | AT91C_TCB_TC2XC2S_NONE; + + // disable TC0 and TC1 for re-configuration AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS; + AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS; + + // first configure TC1 (higher, 0xFFFF0000) 16 bit counter + AT91C_BASE_TC1->TC_CMR = AT91C_TC_CLKS_XC1; // just connect to TIOA0 from TC0 + AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; // re-enable timer and wait for TC0 + + // second configure TC0 (lower, 0x0000FFFF) 16 bit counter AT91C_BASE_TC0->TC_CMR = AT91C_TC_CLKS_TIMER_DIV3_CLOCK | // MCK(48MHz) / 32 - AT91C_TC_WAVE | AT91C_TC_WAVESEL_UP_AUTO | AT91C_TC_ACPA_CLEAR | - AT91C_TC_ACPC_SET | AT91C_TC_ASWTRG_SET; - AT91C_BASE_TC0->TC_RA = 1; - AT91C_BASE_TC0->TC_RC = 0; + AT91C_TC_WAVE | AT91C_TC_WAVESEL_UP_AUTO | + AT91C_TC_ACPA_CLEAR | // RA comperator clears TIOA (carry bit) + AT91C_TC_ACPC_SET | // RC comperator sets TIOA (carry bit) + AT91C_TC_ASWTRG_SET; // SWTriger sets TIOA (carry bit) + AT91C_BASE_TC0->TC_RC = 0; // set TIOA (carry bit) on overflow, return to zero + AT91C_BASE_TC0->TC_RA = 1; // clear carry bit on next clock cycle + AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; // reset and re-enable timer + + // synchronized startup procedure + while (AT91C_BASE_TC0->TC_CV > 0); // wait until TC0 returned to zero + while (AT91C_BASE_TC0->TC_CV < 2); // and has started (TC_CV > TC_RA, now TC1 is cleared) + + // return to zero + AT91C_BASE_TC1->TC_CCR = AT91C_TC_SWTRG; + AT91C_BASE_TC0->TC_CCR = AT91C_TC_SWTRG; + while (AT91C_BASE_TC0->TC_CV > 0); +} - AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS; // timer disable - AT91C_BASE_TC1->TC_CMR = AT91C_TC_CLKS_XC1; // from TC0 - - AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; - AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; - AT91C_BASE_TCB->TCB_BCR = 1; - - // wait until timer becomes zero. - while (AT91C_BASE_TC1->TC_CV > 0); + +uint32_t GetTicks(void) { + uint32_t hi, lo; + + do { + hi = AT91C_BASE_TC1->TC_CV; + lo = AT91C_BASE_TC0->TC_CV; + } while(hi != AT91C_BASE_TC1->TC_CV); + + return (hi << 16) | lo; } + // Wait - Spindelay in ticks. // if called with a high number, this will trigger the WDT... void WaitTicks(uint32_t ticks){ if ( ticks == 0 ) return; - ticks += GET_TICKS; - while (GET_TICKS < ticks); + ticks += GetTicks(); + while (GetTicks() < ticks); } + + // Wait / Spindelay in us (microseconds) // 1us = 1.5ticks. void WaitUS(uint16_t us){ - if ( us == 0 ) return; - WaitTicks( (uint32_t)(us * 1.5) ); + WaitTicks( (uint32_t)us * 3 / 2 ) ; } + + void WaitMS(uint16_t ms){ - if (ms == 0) return; - WaitTicks( (uint32_t)(ms * 1500) ); + WaitTicks( (uint32_t)ms * 1500 ); } + + // Starts Clock and waits until its reset void ResetTicks(void){ - AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; - while (AT91C_BASE_TC1->TC_CV > 0); + AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; + while (AT91C_BASE_TC0->TC_CV > 0); } + + void ResetTimer(AT91PS_TC timer){ timer->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; while(timer->TC_CV > 0) ; } + + // stop clock void StopTicks(void){ AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS; AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS; } + static uint64_t next_random = 1; /* Generates a (non-cryptographically secure) 32-bit random number. @@ -512,4 +565,3 @@ uint32_t prand() { next_random = next_random * 6364136223846793005 + 1; return (uint32_t)(next_random >> 32) % 0xffffffff; } -