X-Git-Url: http://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/e30c654b196a87a13ae7f7d4ced930b296c038ec..218103efd33433c4e728e8f5624506e1d3a011bf:/armsrc/fpgaloader.c?ds=sidebyside diff --git a/armsrc/fpgaloader.c b/armsrc/fpgaloader.c index b6f9d566..32e0500e 100644 --- a/armsrc/fpgaloader.c +++ b/armsrc/fpgaloader.c @@ -1,11 +1,19 @@ //----------------------------------------------------------------------------- +// Jonathan Westhues, April 2006 +// iZsh , 2014 +// +// This code is licensed to you under the terms of the GNU GPL, version 2 or, +// at your option, any later version. See the LICENSE.txt file for the text of +// the license. +//----------------------------------------------------------------------------- // Routines to load the FPGA image, and then to configure the FPGA's major // mode once it is configured. -// -// Jonathan Westhues, April 2006 //----------------------------------------------------------------------------- -#include "proxmark3.h" + +#include "../include/proxmark3.h" #include "apps.h" +#include "util.h" +#include "string.h" //----------------------------------------------------------------------------- // Set up the Serial Peripheral Interface as master @@ -108,14 +116,12 @@ void FpgaSetupSsc(void) AT91C_BASE_SSC->SSC_RCMR = SSC_CLOCK_MODE_SELECT(1) | SSC_CLOCK_MODE_START(1); // 8 bits per transfer, no loopback, MSB first, 1 transfer per sync - // pulse, no output sync, start on positive-going edge of sync - AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(8) | - AT91C_SSC_MSBF | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0); + // pulse, no output sync + AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(8) | AT91C_SSC_MSBF | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0); // clock comes from TK pin, no clock output, outputs change on falling - // edge of TK, start on rising edge of TF - AT91C_BASE_SSC->SSC_TCMR = SSC_CLOCK_MODE_SELECT(2) | - SSC_CLOCK_MODE_START(5); + // edge of TK, sample on rising edge of TK, start on positive-going edge of sync + AT91C_BASE_SSC->SSC_TCMR = SSC_CLOCK_MODE_SELECT(2) | SSC_CLOCK_MODE_START(5); // tx framing is the same as the rx framing AT91C_BASE_SSC->SSC_TFMR = AT91C_BASE_SSC->SSC_RFMR; @@ -129,13 +135,20 @@ void FpgaSetupSsc(void) // ourselves, not to another buffer). The stuff to manipulate those buffers // is in apps.h, because it should be inlined, for speed. //----------------------------------------------------------------------------- -void FpgaSetupSscDma(BYTE *buf, int len) +bool FpgaSetupSscDma(uint8_t *buf, int len) { - AT91C_BASE_PDC_SSC->PDC_RPR = (DWORD)buf; - AT91C_BASE_PDC_SSC->PDC_RCR = len; - AT91C_BASE_PDC_SSC->PDC_RNPR = (DWORD)buf; - AT91C_BASE_PDC_SSC->PDC_RNCR = len; - AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTEN; + if (buf == NULL) { + return false; + } + + AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS; // Disable DMA Transfer + AT91C_BASE_PDC_SSC->PDC_RPR = (uint32_t) buf; // transfer to this memory address + AT91C_BASE_PDC_SSC->PDC_RCR = len; // transfer this many bytes + AT91C_BASE_PDC_SSC->PDC_RNPR = (uint32_t) buf; // next transfer to same memory address + AT91C_BASE_PDC_SSC->PDC_RNCR = len; // ... with same number of bytes + AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTEN; // go! + + return true; } static void DownloadFPGA_byte(unsigned char w) @@ -207,8 +220,8 @@ static void DownloadFPGA(const char *FpgaImage, int FpgaImageLen, int byterevers } if(bytereversal) { - /* This is only supported for DWORD aligned images */ - if( ((int)FpgaImage % sizeof(DWORD)) == 0 ) { + /* This is only supported for uint32_t aligned images */ + if( ((int)FpgaImage % sizeof(uint32_t)) == 0 ) { i=0; while(FpgaImageLen-->0) DownloadFPGA_byte(FpgaImage[(i++)^0x3]); @@ -240,7 +253,7 @@ static void DownloadFPGA(const char *FpgaImage, int FpgaImageLen, int byterevers static char *bitparse_headers_start; static char *bitparse_bitstream_end; -static int bitparse_initialized; +static int bitparse_initialized = 0; /* Simple Xilinx .bit parser. The file starts with the fixed opaque byte sequence * 00 09 0f f0 0f f0 0f f0 0f f0 00 00 01 * After that the format is 1 byte section type (ASCII character), 2 byte length @@ -310,12 +323,28 @@ int bitparse_find_section(char section_name, char **section_start, unsigned int // Find out which FPGA image format is stored in flash, then call DownloadFPGA // with the right parameters to download the image //----------------------------------------------------------------------------- -extern char _binary_fpga_bit_start, _binary_fpga_bit_end; -void FpgaDownloadAndGo(void) +extern char _binary_fpga_lf_bit_start, _binary_fpga_lf_bit_end; +extern char _binary_fpga_hf_bit_start, _binary_fpga_hf_bit_end; +void FpgaDownloadAndGo(int bitstream_version) { + void *bit_start; + void *bit_end; + + // check whether or not the bitstream is already loaded + if (FpgaGatherBitstreamVersion() == bitstream_version) + return; + + if (bitstream_version == FPGA_BITSTREAM_LF) { + bit_start = &_binary_fpga_lf_bit_start; + bit_end = &_binary_fpga_lf_bit_end; + } else if (bitstream_version == FPGA_BITSTREAM_HF) { + bit_start = &_binary_fpga_hf_bit_start; + bit_end = &_binary_fpga_hf_bit_end; + } else + return; /* Check for the new flash image format: Should have the .bit file at &_binary_fpga_bit_start */ - if(bitparse_init(&_binary_fpga_bit_start, &_binary_fpga_bit_end)) { + if(bitparse_init(bit_start, bit_end)) { /* Successfully initialized the .bit parser. Find the 'e' section and * send its contents to the FPGA. */ @@ -330,15 +359,26 @@ void FpgaDownloadAndGo(void) /* Fallback for the old flash image format: Check for the magic marker 0xFFFFFFFF * 0xAA995566 at address 0x102000. This is raw bitstream with a size of 336,768 bits - * = 10,524 DWORDs, stored as DWORDS e.g. little-endian in memory, but each DWORD + * = 10,524 uint32_t, stored as uint32_t e.g. little-endian in memory, but each DWORD * is still to be transmitted in MSBit first order. Set the invert flag to indicate * that the DownloadFPGA function should invert every 4 byte sequence when doing * the bytewise download. */ - if( *(DWORD*)0x102000 == 0xFFFFFFFF && *(DWORD*)0x102004 == 0xAA995566 ) + if( *(uint32_t*)0x102000 == 0xFFFFFFFF && *(uint32_t*)0x102004 == 0xAA995566 ) DownloadFPGA((char*)0x102000, 10524*4, 1); } +int FpgaGatherBitstreamVersion() +{ + char temp[256]; + FpgaGatherVersion(temp, sizeof (temp)); + if (!memcmp("LF", temp, 2)) + return FPGA_BITSTREAM_LF; + else if (!memcmp("HF", temp, 2)) + return FPGA_BITSTREAM_HF; + return FPGA_BITSTREAM_ERR; +} + void FpgaGatherVersion(char *dst, int len) { char *fpga_info; @@ -347,13 +387,15 @@ void FpgaGatherVersion(char *dst, int len) if(!bitparse_find_section('e', &fpga_info, &fpga_info_len)) { strncat(dst, "FPGA image: legacy image without version information", len-1); } else { - strncat(dst, "FPGA image built", len-1); /* USB packets only have 48 bytes data payload, so be terse */ -#if 0 if(bitparse_find_section('a', &fpga_info, &fpga_info_len) && fpga_info[fpga_info_len-1] == 0 ) { - strncat(dst, " from ", len-1); - strncat(dst, fpga_info, len-1); + if (!memcmp("fpga_lf", fpga_info, 7)) + strncat(dst, "LF ", len-1); + else if (!memcmp("fpga_hf", fpga_info, 7)) + strncat(dst, "HF ", len-1); } + strncat(dst, "FPGA image built", len-1); +#if 0 if(bitparse_find_section('b', &fpga_info, &fpga_info_len) && fpga_info[fpga_info_len-1] == 0 ) { strncat(dst, " for ", len-1); strncat(dst, fpga_info, len-1); @@ -375,7 +417,7 @@ void FpgaGatherVersion(char *dst, int len) // The bit format is: C3 C2 C1 C0 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 // where C is the 4 bit command and D is the 12 bit data //----------------------------------------------------------------------------- -void FpgaSendCommand(WORD cmd, WORD v) +void FpgaSendCommand(uint16_t cmd, uint16_t v) { SetupSpi(SPI_FPGA_MODE); while ((AT91C_BASE_SPI->SPI_SR & AT91C_SPI_TXEMPTY) == 0); // wait for the transfer to complete @@ -386,7 +428,7 @@ void FpgaSendCommand(WORD cmd, WORD v) // vs. clone vs. etc.). This is now a special case of FpgaSendCommand() to // avoid changing this function's occurence everywhere in the source code. //----------------------------------------------------------------------------- -void FpgaWriteConfWord(BYTE v) +void FpgaWriteConfWord(uint8_t v) { FpgaSendCommand(FPGA_CMD_SET_CONFREG, v); } @@ -396,7 +438,7 @@ void FpgaWriteConfWord(BYTE v) // closable, but should only close one at a time. Not an FPGA thing, but // the samples from the ADC always flow through the FPGA. //----------------------------------------------------------------------------- -void SetAdcMuxFor(DWORD whichGpio) +void SetAdcMuxFor(uint32_t whichGpio) { AT91C_BASE_PIOA->PIO_OER = GPIO_MUXSEL_HIPKD |