X-Git-Url: http://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/e3dc1e4cf50cac8af65b062ab7ce6cf1a01bd5fc..94ad01bfba1c29747f9c42942bbec6b834695ef2:/armsrc/iclass.c diff --git a/armsrc/iclass.c b/armsrc/iclass.c index 8d65b523..7289abbc 100644 --- a/armsrc/iclass.c +++ b/armsrc/iclass.c @@ -48,17 +48,6 @@ static int timeout = 4096; -// CARD TO READER -// Sequence D: 11110000 modulation with subcarrier during first half -// Sequence E: 00001111 modulation with subcarrier during second half -// Sequence F: 00000000 no modulation with subcarrier -// READER TO CARD -// Sequence X: 00001100 drop after half a period -// Sequence Y: 00000000 no drop -// Sequence Z: 11000000 drop at start -#define SEC_X 0x0c -#define SEC_Y 0x00 -#define SEC_Z 0xc0 static int SendIClassAnswer(uint8_t *resp, int respLen, int delay); @@ -666,12 +655,7 @@ static RAMFUNC int ManchesterDecoding(int v) //----------------------------------------------------------------------------- void RAMFUNC SnoopIClass(void) { -// DEFINED ABOVE -// #define RECV_CMD_OFFSET 3032 -// #define RECV_RES_OFFSET 3096 -// #define DMA_BUFFER_OFFSET 3160 -// #define DMA_BUFFER_SIZE 4096 -// #define TRACE_SIZE 3000 + // We won't start recording the frames that we acquire until we trigger; // a good trigger condition to get started is probably when we see a @@ -681,14 +665,10 @@ void RAMFUNC SnoopIClass(void) // The command (reader -> tag) that we're receiving. // The length of a received command will in most cases be no more than 18 bytes. // So 32 should be enough! - uint8_t *receivedCmd = (((uint8_t *)BigBuf) + RECV_CMD_OFFSET); + uint8_t *readerToTagCmd = (((uint8_t *)BigBuf) + RECV_CMD_OFFSET); // The response (tag -> reader) that we're receiving. - uint8_t *receivedResponse = (((uint8_t *)BigBuf) + RECV_RES_OFFSET); + uint8_t *tagToReaderResponse = (((uint8_t *)BigBuf) + RECV_RES_OFFSET); - // As we receive stuff, we copy it from receivedCmd or receivedResponse - // into trace, along with its length and other annotations. - //uint8_t *trace = (uint8_t *)BigBuf; - // reset traceLen to 0 iso14a_set_tracing(TRUE); iso14a_clear_trace(); @@ -706,10 +686,8 @@ void RAMFUNC SnoopIClass(void) int samples = 0; rsamples = 0; - memset(trace, 0x44, RECV_CMD_OFFSET); - // Set up the demodulator for tag -> reader responses. - Demod.output = receivedResponse; + Demod.output = tagToReaderResponse; Demod.len = 0; Demod.state = DEMOD_UNSYNCD; @@ -721,7 +699,7 @@ void RAMFUNC SnoopIClass(void) // And the reader -> tag commands memset(&Uart, 0, sizeof(Uart)); - Uart.output = receivedCmd; + Uart.output = readerToTagCmd; Uart.byteCntMax = 32; // was 100 (greg)//////////////////////////////////////////////////////////////////////// Uart.state = STATE_UNSYNCD; @@ -731,6 +709,9 @@ void RAMFUNC SnoopIClass(void) FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_SNIFFER); SetAdcMuxFor(GPIO_MUXSEL_HIPKD); + uint32_t time_0 = GetCountSspClk(); + + int div = 0; //int div2 = 0; int decbyte = 0; @@ -764,20 +745,13 @@ void RAMFUNC SnoopIClass(void) //samples += 4; samples += 1; - //div2++; - //if(div2 > 3) { - //div2 = 0; - //decbyte ^= ((smpl & 0x01) << (3 - div)); - //decbyte ^= (((smpl & 0x01) | ((smpl & 0x02) >> 1)) << (3 - div)); // better already... - //decbyte ^= (((smpl & 0x01) | ((smpl & 0x02) >> 1) | ((smpl & 0x04) >> 2)) << (3 - div)); // even better... if(smpl & 0xF) { decbyte ^= (1 << (3 - div)); } - //decbyte ^= (MajorityNibble[(smpl & 0x0F)] << (3 - div)); // FOR READER SIDE COMMUMICATION... - //decbyte ^= ((smpl & 0x10) << (3 - div)); + decbyter <<= 2; decbyter ^= (smpl & 0x30); @@ -788,21 +762,17 @@ void RAMFUNC SnoopIClass(void) if(OutOfNDecoding((smpl & 0xF0) >> 4)) { rsamples = samples - Uart.samples; LED_C_ON(); - //if(triggered) { - trace[traceLen++] = ((rsamples >> 0) & 0xff); - trace[traceLen++] = ((rsamples >> 8) & 0xff); - trace[traceLen++] = ((rsamples >> 16) & 0xff); - trace[traceLen++] = ((rsamples >> 24) & 0xff); - trace[traceLen++] = ((Uart.parityBits >> 0) & 0xff); - trace[traceLen++] = ((Uart.parityBits >> 8) & 0xff); - trace[traceLen++] = ((Uart.parityBits >> 16) & 0xff); - trace[traceLen++] = ((Uart.parityBits >> 24) & 0xff); - trace[traceLen++] = Uart.byteCnt; - memcpy(trace+traceLen, receivedCmd, Uart.byteCnt); - traceLen += Uart.byteCnt; - if(traceLen > TRACE_SIZE) break; - //} - /* And ready to receive another command. */ + + //if(!LogTrace(Uart.output,Uart.byteCnt, rsamples, Uart.parityBits,TRUE)) break; + //if(!LogTrace(NULL, 0, Uart.endTime*16 - DELAY_READER_AIR2ARM_AS_SNIFFER, 0, TRUE)) break; + if(tracing) + { + LogTrace(Uart.output,Uart.byteCnt, (GetCountSspClk()-time_0) << 4, Uart.parityBits,TRUE); + LogTrace(NULL, 0, (GetCountSspClk()-time_0) << 4, 0, TRUE); + } + + + /* And ready to receive another command. */ Uart.state = STATE_UNSYNCD; /* And also reset the demod code, which might have been */ /* false-triggered by the commands from the reader. */ @@ -819,26 +789,16 @@ void RAMFUNC SnoopIClass(void) rsamples = samples - Demod.samples; LED_B_ON(); - // timestamp, as a count of samples - trace[traceLen++] = ((rsamples >> 0) & 0xff); - trace[traceLen++] = ((rsamples >> 8) & 0xff); - trace[traceLen++] = ((rsamples >> 16) & 0xff); - trace[traceLen++] = 0x80 | ((rsamples >> 24) & 0xff); - trace[traceLen++] = ((Demod.parityBits >> 0) & 0xff); - trace[traceLen++] = ((Demod.parityBits >> 8) & 0xff); - trace[traceLen++] = ((Demod.parityBits >> 16) & 0xff); - trace[traceLen++] = ((Demod.parityBits >> 24) & 0xff); - // length - trace[traceLen++] = Demod.len; - memcpy(trace+traceLen, receivedResponse, Demod.len); - traceLen += Demod.len; - if(traceLen > TRACE_SIZE) break; - - //triggered = TRUE; + if(tracing) + { + LogTrace(Demod.output,Demod.len, (GetCountSspClk()-time_0) << 4 , Demod.parityBits,FALSE); + LogTrace(NULL, 0, (GetCountSspClk()-time_0) << 4, 0, FALSE); + } + // And ready to receive another response. memset(&Demod, 0, sizeof(Demod)); - Demod.output = receivedResponse; + Demod.output = tagToReaderResponse; Demod.state = DEMOD_UNSYNCD; LED_C_OFF(); } @@ -922,6 +882,8 @@ static int GetIClassCommandFromReader(uint8_t *received, int *len, int maxLen) //----------------------------------------------------------------------------- static void CodeIClassTagAnswer(const uint8_t *cmd, int len) { + //So far a dummy implementation, not used + //int lastProxToAirDuration =0; int i; ToSendReset(); @@ -930,7 +892,7 @@ static void CodeIClassTagAnswer(const uint8_t *cmd, int len) ToSend[++ToSendMax] = 0x00; ToSend[++ToSendMax] = 0x00; ToSend[++ToSendMax] = 0x00; - ToSend[++ToSendMax] = 0xff; + ToSend[++ToSendMax] = 0xff;//Proxtoair duration starts here ToSend[++ToSendMax] = 0xff; ToSend[++ToSendMax] = 0xff; ToSend[++ToSendMax] = 0x00; @@ -958,11 +920,13 @@ static void CodeIClassTagAnswer(const uint8_t *cmd, int len) ToSend[++ToSendMax] = 0x00; ToSend[++ToSendMax] = 0xff; ToSend[++ToSendMax] = 0xff; - ToSend[++ToSendMax] = 0xff; + ToSend[++ToSendMax] = 0xff; ToSend[++ToSendMax] = 0x00; ToSend[++ToSendMax] = 0x00; ToSend[++ToSendMax] = 0x00; + //lastProxToAirDuration = 8*ToSendMax - 3*8 - 3*8;//Not counting zeroes in the beginning or end + // Convert from last byte pos to length ToSendMax++; } @@ -970,8 +934,10 @@ static void CodeIClassTagAnswer(const uint8_t *cmd, int len) // Only SOF static void CodeIClassTagSOF() { - ToSendReset(); + //So far a dummy implementation, not used + //int lastProxToAirDuration =0; + ToSendReset(); // Send SOF ToSend[++ToSendMax] = 0x00; ToSend[++ToSendMax] = 0x00; @@ -981,37 +947,85 @@ static void CodeIClassTagSOF() ToSend[++ToSendMax] = 0xff; ToSend[++ToSendMax] = 0x00; ToSend[++ToSendMax] = 0xff; + +// lastProxToAirDuration = 8*ToSendMax - 3*8;//Not counting zeroes in the beginning + // Convert from last byte pos to length ToSendMax++; } -//----------------------------------------------------------------------------- -// Simulate iClass Card -// Only CSN (Card Serial Number) -// -//----------------------------------------------------------------------------- -void SimulateIClass(uint8_t arg0, uint8_t *datain) +/** + * @brief SimulateIClass simulates an iClass card. + * @param arg0 type of simulation + * - 0 uses the first 8 bytes in usb data as CSN + * - 2 "dismantling iclass"-attack. This mode iterates through all CSN's specified + * in the usb data. This mode collects MAC from the reader, in order to do an offline + * attack on the keys. For more info, see "dismantling iclass" and proxclone.com. + * - Other : Uses the default CSN (031fec8af7ff12e0) + * @param arg1 - number of CSN's contained in datain (applicable for mode 2 only) + * @param arg2 + * @param datain + */ +void SimulateIClass(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datain) { - uint8_t simType = arg0; + uint32_t simType = arg0; + uint32_t numberOfCSNS = arg1; - // Enable and clear the trace - tracing = TRUE; - traceLen = 0; - memset(trace, 0x44, TRACE_SIZE); + // Enable and clear the trace + iso14a_set_tracing(TRUE); + iso14a_clear_trace(); - // CSN followed by two CRC bytes - uint8_t response2[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; - uint8_t response3[] = { 0x03, 0x1f, 0xec, 0x8a, 0xf7, 0xff, 0x12, 0xe0, 0x00, 0x00 }; - - // e-Purse - uint8_t response4[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + uint8_t csn_crc[] = { 0x03, 0x1f, 0xec, 0x8a, 0xf7, 0xff, 0x12, 0xe0, 0x00, 0x00 }; if(simType == 0) { // Use the CSN from commandline - memcpy(response3, datain, 8); + memcpy(csn_crc, datain, 8); + doIClassSimulation(csn_crc,0); + }else if(simType == 1) + { + doIClassSimulation(csn_crc,0); + } + else if(simType == 2) + { + Dbprintf("Going into attack mode"); + // In this mode, a number of csns are within datain. We'll simulate each one, one at a time + // in order to collect MAC's from the reader. This can later be used in an offlne-attack + // in order to obtain the keys, as in the "dismantling iclass"-paper. + for(int i = 0 ; i < numberOfCSNS && i*8+8 < USB_CMD_DATA_SIZE; i++) + { + // The usb data is 512 bytes, fitting 65 8-byte CSNs in there. + + memcpy(csn_crc, datain+(i*8), 8); + if(doIClassSimulation(csn_crc,1)) + { + return; // Button pressed + } + } + } + else{ + // We may want a mode here where we hardcode the csns to use (from proxclone). + // That will speed things up a little, but not required just yet. + Dbprintf("The mode is not implemented, reserved for future use"); } +} +/** + * @brief Does the actual simulation + * @param csn - csn to use + * @param breakAfterMacReceived if true, returns after reader MAC has been received. + */ +int doIClassSimulation(uint8_t csn[], int breakAfterMacReceived) +{ + + // CSN followed by two CRC bytes + uint8_t response2[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + uint8_t response3[] = { 0,0,0,0,0,0,0,0,0,0}; + memcpy(response3,csn,sizeof(response3)); + Dbprintf("Simulating CSN %02x%02x%02x%02x%02x%02x%02x%02x",csn[0],csn[1],csn[2],csn[3],csn[4],csn[5],csn[6],csn[7]); + // e-Purse + uint8_t response4[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + // Construct anticollision-CSN rotateCSN(response3,response2); @@ -1019,6 +1033,7 @@ void SimulateIClass(uint8_t arg0, uint8_t *datain) ComputeCrc14443(CRC_ICLASS, response2, 8, &response2[8], &response2[9]); ComputeCrc14443(CRC_ICLASS, response3, 8, &response3[8], &response3[9]); + int exitLoop = 0; // Reader 0a // Tag 0f // Reader 0c @@ -1052,7 +1067,7 @@ void SimulateIClass(uint8_t arg0, uint8_t *datain) int resp4Len; // + 1720.. - uint8_t *receivedCmd = (((uint8_t *)BigBuf) + RECV_CMD_OFFSET); + uint8_t *receivedCmd = (((uint8_t *)BigBuf) + RECV_CMD_OFFSET); memset(receivedCmd, 0x44, RECV_CMD_SIZE); int len; @@ -1087,35 +1102,42 @@ void SimulateIClass(uint8_t arg0, uint8_t *datain) // To control where we are in the protocol int cmdsRecvd = 0; + uint32_t time_0 = GetCountSspClk(); + uint32_t t2r_time =0; + uint32_t r2t_time =0; LED_A_ON(); - for(;;) { + bool displayDebug = true; + bool buttonPressed = false; + while(!exitLoop) { + displayDebug = true; + LED_B_OFF(); //Signal tracer // Can be used to get a trigger for an oscilloscope.. LED_C_OFF(); if(!GetIClassCommandFromReader(receivedCmd, &len, 100)) { - DbpString("button press"); + buttonPressed = true; break; } + r2t_time = GetCountSspClk(); //Signal tracer LED_C_ON(); - // Okay, look at the command now. - if(receivedCmd[0] == 0x0a) { + if(receivedCmd[0] == 0x0a ) { // Reader in anticollission phase resp = resp1; respLen = resp1Len; //order = 1; respdata = &sof; respsize = sizeof(sof); - //resp = resp2; respLen = resp2Len; order = 2; - //DbpString("Hello request from reader:"); + displayDebug = false; } else if(receivedCmd[0] == 0x0c) { // Reader asks for anticollission CSN resp = resp2; respLen = resp2Len; //order = 2; respdata = response2; respsize = sizeof(response2); + //displayDebug = false; //DbpString("Reader requests anticollission CSN:"); } else if(receivedCmd[0] == 0x81) { // Reader selects anticollission CSN. @@ -1132,30 +1154,28 @@ void SimulateIClass(uint8_t arg0, uint8_t *datain) LED_B_ON(); } else if(receivedCmd[0] == 0x05) { // Reader random and reader MAC!!! - // Lets store this ;-) -/* - Dbprintf(" CSN: %02x %02x %02x %02x %02x %02x %02x %02x", - response3[0], response3[1], response3[2], - response3[3], response3[4], response3[5], - response3[6], response3[7]); -*/ - Dbprintf("READER AUTH (len=%02d): %02x %02x %02x %02x %02x %02x %02x %02x %02x", - len, - receivedCmd[0], receivedCmd[1], receivedCmd[2], - receivedCmd[3], receivedCmd[4], receivedCmd[5], - receivedCmd[6], receivedCmd[7], receivedCmd[8]); - // Do not respond // We do not know what to answer, so lets keep quit resp = resp1; respLen = 0; //order = 5; respdata = NULL; respsize = 0; + if (breakAfterMacReceived){ + // TODO, actually return this to the caller instead of just + // dbprintf:ing ... + Dbprintf("CSN: %02x %02x %02x %02x %02x %02x %02x %02x"); + Dbprintf("RDR: (len=%02d): %02x %02x %02x %02x %02x %02x %02x %02x %02x",len, + receivedCmd[0], receivedCmd[1], receivedCmd[2], + receivedCmd[3], receivedCmd[4], receivedCmd[5], + receivedCmd[6], receivedCmd[7], receivedCmd[8]); + exitLoop = true; + } } else if(receivedCmd[0] == 0x00 && len == 1) { // Reader ends the session resp = resp1; respLen = 0; //order = 0; respdata = NULL; respsize = 0; } else { + //#db# Unknown command received from reader (len=5): 26 1 0 f6 a 44 44 44 44 // Never seen this command before Dbprintf("Unknown command received from reader (len=%d): %x %x %x %x %x %x %x %x %x", len, @@ -1168,8 +1188,8 @@ void SimulateIClass(uint8_t arg0, uint8_t *datain) respsize = 0; } - if(cmdsRecvd > 999) { - DbpString("1000 commands later..."); + if(cmdsRecvd > 100) { + //DbpString("100 commands later..."); break; } else { @@ -1178,25 +1198,52 @@ void SimulateIClass(uint8_t arg0, uint8_t *datain) if(respLen > 0) { SendIClassAnswer(resp, respLen, 21); + t2r_time = GetCountSspClk(); + +// } + if(displayDebug) Dbprintf("R2T:(len=%d): %x %x %x %x %x %x %x %x %x\nT2R: (total/data =%d/%d): %x %x %x %x %x %x %x %x %x", + len, + receivedCmd[0], receivedCmd[1], receivedCmd[2], + receivedCmd[3], receivedCmd[4], receivedCmd[5], + receivedCmd[6], receivedCmd[7], receivedCmd[8], + respLen,respsize, + resp[0], resp[1], resp[2], + resp[3], resp[4], resp[5], + resp[6], resp[7], resp[8]); + } - + if (tracing) { - LogTrace(receivedCmd,len, rsamples, Uart.parityBits, TRUE); + //LogTrace(receivedCmd,len, rsamples, Uart.parityBits, TRUE); + + LogTrace(receivedCmd,len, (r2t_time-time_0)<< 4, Uart.parityBits,TRUE); + LogTrace(NULL,0, (r2t_time-time_0) << 4, 0,TRUE); + if (respdata != NULL) { - LogTrace(respdata,respsize, rsamples, SwapBits(GetParity(respdata,respsize),respsize), FALSE); + //LogTrace(respdata,respsize, rsamples, SwapBits(GetParity(respdata,respsize),respsize), FALSE); + //if(!LogTrace(resp,respLen, rsamples,SwapBits(GetParity(respdata,respsize),respsize),FALSE)) + LogTrace(respdata,respsize, (t2r_time-time_0) << 4,SwapBits(GetParity(respdata,respsize),respsize),FALSE); + LogTrace(NULL,0, (t2r_time-time_0) << 4,0,FALSE); + + } - if(traceLen > TRACE_SIZE) { + if(!tracing) { DbpString("Trace full"); - break; + //break; } - } + } memset(receivedCmd, 0x44, RECV_CMD_SIZE); } Dbprintf("%x", cmdsRecvd); LED_A_OFF(); LED_B_OFF(); + if(buttonPressed) + { + DbpString("Button pressed"); + } + return buttonPressed; } static int SendIClassAnswer(uint8_t *resp, int respLen, int delay) @@ -1427,7 +1474,7 @@ void ReaderIClass(uint8_t arg0) { uint8_t* resp = (((uint8_t *)BigBuf) + 3560); // was 3560 - tied to other size changes // Reset trace buffer - memset(trace, 0x44, RECV_CMD_OFFSET); + memset(trace, 0x44, RECV_CMD_OFFSET); traceLen = 0; // Setup SSC