X-Git-Url: http://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/f665067919fef6bff274d5ede3c30336edef5071..db8296025f78251ffa2c28d6fe995bbb0a386c77:/armsrc/lfops.c

diff --git a/armsrc/lfops.c b/armsrc/lfops.c
index 01b88178..3acecd6e 100644
--- a/armsrc/lfops.c
+++ b/armsrc/lfops.c
@@ -1078,21 +1078,7 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
 #define WRITE_GAP 20*8 // was 160 // SPEC:  1*8 to 20*8 - typ 10*8 (or 10fc)
 #define WRITE_0   18*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (or 24fc)
 #define WRITE_1   50*8 // was 400 // SPEC: 48*8 to 64*8 - typ 56*8 (or 56fc)  432 for T55x7; 448 for E5550
-#define READ_GAP  52*8 
-
-//  VALUES TAKEN FROM EM4x function: SendForward
-//  START_GAP = 440;       (55*8) cycles at 125Khz (8us = 1cycle)
-//  WRITE_GAP = 128;       (16*8)
-//  WRITE_1   = 256 32*8;  (32*8) 
-
-//  These timings work for 4469/4269/4305 (with the 55*8 above)
-//  WRITE_0 = 23*8 , 9*8  SpinDelayUs(23*8); 
-
-// Sam7s has several timers, we will use the source TIMER_CLOCK1 (aka AT91C_TC_CLKS_TIMER_DIV1_CLOCK)
-// TIMER_CLOCK1 = MCK/2, MCK is running at 48 MHz, Timer is running at 48/2 = 24 MHz
-// Hitag units (T0) have duration of 8 microseconds (us), which is 1/125000 per second (carrier)
-// T0 = TIMER_CLOCK1 / 125000 = 192
-// 1 Cycle = 8 microseconds(us)  == 1 field clock
+#define READ_GAP  26*8 
 
 void TurnReadLFOn(int delay) {
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
@@ -1191,7 +1177,7 @@ void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) {
 	cmd_send(CMD_ACK,0,0,0,0,0);
 }
 
-// Read one card block in page 0
+// Read one card block in page [page]
 void T55xxReadBlock(uint16_t arg0, uint8_t Block, uint32_t Pwd) {
 	LED_A_ON();
 	bool PwdMode = arg0 & 0x1;
@@ -1475,6 +1461,14 @@ uint8_t * fwd_write_ptr; //forwardlink bit pointer
 // see EM4469 spec
 //====================================================================
 //--------------------------------------------------------------------
+//  VALUES TAKEN FROM EM4x function: SendForward
+//  START_GAP = 440;       (55*8) cycles at 125Khz (8us = 1cycle)
+//  WRITE_GAP = 128;       (16*8)
+//  WRITE_1   = 256 32*8;  (32*8) 
+
+//  These timings work for 4469/4269/4305 (with the 55*8 above)
+//  WRITE_0 = 23*8 , 9*8  SpinDelayUs(23*8); 
+
 uint8_t Prepare_Cmd( uint8_t cmd ) {
 	//--------------------------------------------------------------------